Course Details

Use * for wildcards - e.g. ccna*,*switch

ONS 15454 Multiservice Transport Platform (MSTP) Release 9.2 Implementing DWDM From Installation to 0

Prerequisites
Following are the prerequisites for this course:. ● Familiarity with the Cisco ONS 15454 family ● Knowledge of SONET or SDH structure and hierarchy ● Knowledge of DWDM basics To locate Cisco courses that cover the listed prerequisites, go to the Cisco Training & Events web page at www.cisco.com/web/learning/index.html.
Course Content

In this lab-intensive course you will learn the skills necessary to deploy a multiservice transport platform (MSTP) network, including fiber-cleaning techniques, fiber test requirements, and node turn-up. The course covers three shelf types, the M12, M6, and M2. You will learn to deploy linear and ring dense wavelength-division multiplexing (DWDM) topologies. The course covers multiplexer and demultiplexer cards, Erbium doped fiber amplifier cards, Raman amplifiers and transponder cards and how they are used in terminal, amplifier, and Reconfigurable Optical Add-Drop Multiplexer (ROADM) node configurations. You will configure wavelength selective switch (WSS) rings and single-module ROADM (SMR) rings. Using Cisco® Transport Planner, you will design a DWDM network and use the output to configure the Cisco ONS MSTP Node. The MSTP Basic course covers 2.5 G and 10G protected and unprotected DWDM circuits. For more information, please visit www.cisco.com/go/ase.

p>

Course Objectives

After completing this course, the learner will be able to meet these overall objectives:

● Connect and configure a Cisco ONS 15454 MSTP chassis ● Identify node configurations according to card population ● Characterize the role of Cisco Transport Planner in turning up an MSTP network ● Provision DWDM circuits using Cisco Transport Controller ● Perform performance monitoring, alarm verification, and fault isolation ● Provision M12 WSS and M6 SMR nodes in ring topologies ● Perform Raman amplifier initialization ● Isolate “optical” network issues

  • Course Outline
    The course outline is as follows: ● Module 1: Cisco ONS 15454 MSTP Product Overview ● Module 2: DWDM Fundamentals ● Module 3: Safety ● Module 4: Optical Fiber and Cleaning ● Module 5: DWDM Test Equipment ● Module 6: Shelf Layout and Components ● Module 7: Documentation ● Module 8: CTC Operations ● Module 9: MSTP Topologies ● Module 10: Shelf and Card Installation ● Module 11: System Setup ● Module 12: Demonstrate Node Turn-Up ● Module 13: Linear Configurations ● Module 14: Node Turn-Up ● Module 15: Network Connections ● Module 16: Optical Channel Network Connection Circuits ● Module 17: Transponder and Optical Channel Client Connection Circuits ● Module 18: Transport_Planner ● Module 19: Linear Amplifier ● Module 20: Multishelf ● Module 21: MSTP M12 WSS-Based Rings ● Module 22: MSTP M6 SMR-Based Rings ● Module 23: 2.5G Transponder Protection ● Module 24: 10G Transponders ● Module 25: 10G Protection ● Module 26: Raman Amplifier ● Module 27: Troubleshooting
    Who Should Attend
    This course is for technical professionals who are responsible for installation, deployment, and maintenance of the Cisco 15454 MSTP network. Network operations, planners, and designers will also benefit.
  • Career Certifications

  • Technology

  • Delivery

    • ClassroomClassroom
    • Virtual ClassroomVirtual Classroom
  • Duration

     5  Days

Total 8 Course Offerings found.