Guest

Course Details

Use * for wildcards - e.g. ccna*,*switch

Advanced Services’ Cisco 7600 Series Essentials (7600) 3.0

Prerequisites
Following are the prerequisites for this course. ● Experience using Cisco IOS® Software for config Open Shortest Path First (OSPF), Borde System-to-Intermediate System (IS-IS) ● Basic understanding of QoS operations To locate Cisco courses that cover the listed prerequisites, go to the Cisco Training and Events webpage at www.cisco.com/web/learning/index.html
Course Content
This five-day class provides you with the information required to optimally deploy a network of Cisco® 7600 Series Routers. You will learn the primary points of the system architecture and features so you can use the correct features for your network. Hands-on lab sessions enable you to practice the skills needed to deploy a Cisco 7600 Series Router. You will learn to apply quality of service (QoS) techniques, deploy Multiprotocol Label Switching (MPLS) Layer 3 VPNs in addition to Layer 2 Ethernet over MPLS (EoMPLS) and Virtual Private LAN Services (VPLS) VPNs, and utilize Stateful Switchover (SSO) and Nonstop Forwarding (NSF). You will also explore Cisco 7600 Series packet-forwarding techniques and the supported Cisco supervisor engines, route switch processors, line cards, shared port adapters (SPAs), and SPA interface processors (SIPs) to help improve the system’s performance. You will gain the knowledge and skills to use the high-availability features of the Cisco 7600 Series to make sure your network benefits the most.
Course Outline
Module 1: Cisco 7600 Series Router S ◦ Router Functions ◦ Chassis Configur ◦ Router Interface Breadth ◦ System Images ● Module 2: Cisco 7600 Series Router Hardware Overview ◦ Chassis Compone ◦ Supervisor Engine 720, Route Switch Processor 720, and Sup ◦ Monitoring Traffic ◦ Line-Card Architectures, Including ES20 and ES+ ◦ SPA Interface Processors ● Module 3: Detailed Supervisor Engin ◦ Supervisor Engine 720, Route Switch Processor 720 and Supervisor Engine 32 H ardware and Architecture ◦ Forwarding Architecture, plus Bus Switching ● Module 4: Packet Flows in the Cis ◦ Unicast and Multicast Packet Forwarding ◦ Forwarding Decision Proc ◦ Control Plane Forwarding, Policing, and Rate Education Data Sheet All contents are Copyright © 1992–2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 3 ● Module 5: High Availability ◦ Redundancy and High-Availability Features ◦ SSO and Nonstop Forwarding Operation ◦ Cisco 7600 Series Software Resiliency Features, with Fast Fabric ● Module 6: Cisco 7600 Series Router QoS ◦ QoS Architecture, Command Sets, plus Fucntions a ◦ Traffic Prioritzation, and QoS Modes ◦ Output Policies plus Policing and Marking ● Module 7: MPLS on Cisco 7600 Series Route ◦ MPLS Functionality, Packet Processing and Packet Recirculation ◦ MPLS QoS Differentiated Service Modes ● Module 8: Layer 2 EoMPLS and VPLS VPNs on Cisco 7600 Series Routers EoMPLS and VPLS Definition, Functionality and components Configuration Basics for EoMPLS and VPLS, plus Cisco 7600 Series specific options Layer 2 and Layer 3 VPN Comparison
Who Should Attend
This course is intended for network professionals who implement and support large enterprises or service providers that have a need to deploy and maintain Cisco 7600 Series Routers.
  • Career Certifications

  • Technology

    Routing & Switching (R&S)

  • Delivery

  • Duration

     5  Days

Currently there are no scheduled offerings for this course.