Guest

Course Details

Use * for wildcards - e.g. ccna*,*switch

Cisco Carrier Routing Systems Product Enhancements (CCRSPE) 3.0

Prerequisites
Table 1 lists the prerequisites for this course. Table 1. Course Prerequisites Prerequisite Knowledge Relevant Courses œ Strong knowledge of Cisco CRS-1 routing system œ CRS-1 Essentials (CRS1E) To locate Cisco courses that cover the listed prerequisites, refer to www.cisco.com/go/ase.
Course Content
The Cisco Carrier Routing Systems Product Enhancements version 3.0 instructor-led course offered by High-Touch Delivery Learning Services course introduces you to the Cisco® CRS product enhancements, which include Cisco CRS-3 switch fabric cards, Cisco CRS-3 line cards, Cisco CRS-3 physical layer interface modules (PLIMs), performance route processors (PRPs) and modular power systems, and their features and functions. In addition, the Cisco CRS-3 back-to-back (B2B) multishelf routing system, the new 4X40Gb/s Ethernet OTN PLIM, and 1X100Gb/s Ethernet IPoDWDM PLIM and online diagnostics are covered. You will learn the important theoretical concepts on which the Cisco CRS-1 and Cisco CRS-3 are based and gain the practical knowledge and skills to successfully deploy them in your network. You will be able to determine which Cisco CRS product enhancements are right for your routing systems based on the requirements of your network. In the hands-on labs, you will explore new ASIC features and functions on the Cisco CRS-3 switch fabric cards, line cards, and PLIMs and compare those features and functions to Cisco CRS-1 hardware. In addition, you will explore the ASIC features and functions and investigate modular power systems that can be installed in either a Cisco CRS-1 or Cisco CRS-3 routing system. You will be able to verify proper operation of various CRS-3 hardware, including the 140Gb/s switch fabric, 140Gb/s line cards, 14- and 20-port 10 Gigabit Ethernet PLIMs, the PRP, and the new modular power systems, and perform basic troubleshooting. This course combines lecture materials and hands-on labs throughout to make sure that you are able to successfully deploy Cisco CRS product enhancements in your network.
Course Outline
The course outline is as follows: œ Module 1: Introduction to Cisco CRS Enhancements œ Module 2: Modular Power Systems œ Module 3: Performance Route Processors œ Module 4: 140Gb/s Switch Fabric œ Module 5: 140 Gigabit Line Cards œ Module 6: New High-Speed Ethernet PLIMs œ Module 7: Migration to Cisco IOS XR Release 4.2.1 œ Module 8: Cisco CRS-3 B2B Multishelf Routing System œ Module 9: New OTN and IPoDWDM Ethernet PLIMs œ Module 10: Diagnostics
Who Should Attend
This course is designed for technical professionals who need to know how to deploy Cisco CRS-1 and Cisco CRS-3 routing systems in their network environment. This course is not recommended for those who have attended the Cisco CRS-3 Essentials course. The primary audience for this course includes: œ System engineers œ Technical support personnel œ Channel partners, resellers
  • Career Certifications

  • Technology

    Routing & Switching (R&S)

  • Delivery

  • Duration

     4  Days

Currently there are no scheduled offerings for this course.