Guest

Tools & Resources

SNMP Object Navigator


CISCO-ATM-CONN-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-ATM-CONN-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    4. SNMPv2-MIB Download  |  Download  |  View Dependencies
    5. IANAifType-MIB Download  |  Download  |  View Dependencies
    6. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    7. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    9. IF-MIB Download  |  Download  |  View Dependencies
    10. CISCO-SMI Download  |  Download  |  View Dependencies
    11. ATM-TC-MIB Download  |  Download  |  View Dependencies
    12. ATM-MIB Download  |  Download  |  View Dependencies
    13. CISCO-ATM-IF-MIB Download  |  Download  |  View Dependencies
    14. CISCO-ATM-RM-MIB Download  |  Download  |  View Dependencies
    15. SNMP-FRAMEWORK-MIB Download  |  Download  |  View Dependencies
    16. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    17. CISCO-ATM-CONN-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-ATM-CONN-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- CISCO ATM connection management MIB
--
-- Jan 1996, Yunsen Wang
--
-- Copyright (c) 1996-1999, 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-ATM-CONN-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,
        Counter32,Integer32,Gauge32     FROM SNMPv2-SMI
        TEXTUAL-CONVENTION,
        TimeStamp, 
        TruthValue, RowStatus           FROM SNMPv2-TC
        ifIndex, InterfaceIndexOrZero   FROM IF-MIB
        atmVplVpi, atmVclVpi, atmVclVci,
        AtmTrafficDescrParamIndex       FROM ATM-MIB
        NsapAtmAddr                     FROM CISCO-ATM-IF-MIB
        ciscoExperiment                 FROM CISCO-SMI
        MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
        LsPerVcqThresholdGroup          FROM CISCO-ATM-RM-MIB
        SnmpAdminString                 FROM SNMP-FRAMEWORK-MIB;

ciscoAtmConnMIB   MODULE-IDENTITY
     LAST-UPDATED       "200207120000Z"
     ORGANIZATION       "Cisco Systems, Inc."
     CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-atm@cisco.com"
     DESCRIPTION       "This MIB module is a cisco extension to VPL/VCL table defined 
        in rfc1695 for ATM switch connection management.
"


    REVISION        "200207120000Z"  
    DESCRIPTION            "Added a new enumeration 'useTrafficDescr' to the syntax of 
             ciscoAtmVclEpdEnable.
"
    REVISION        "200110300000Z"  
    DESCRIPTION            "Added ciscoAtmVplConnType and ciscoAtmVclConnType objects  
             to the VPL and VCL tables.
"
                       
    REVISION        "200110100000Z"  
    DESCRIPTION            "Added ciscoAtmVplConnName and ciscoAtmVclConnName objects  
             to the VPL and VCL tables.
"
                       
    REVISION        "200108060000Z"  
    DESCRIPTION            "Added a enumeration for ConfigType to enable configuration
             of Passive Half leg for 2-ended Soft PVC/PVP
"                       
    REVISION        "200101290000Z"
    DESCRIPTION            "Added objects that provide per-connection Transmit 
             statistics for the switch fabric.
"

    REVISION        "9810020000Z"
    DESCRIPTION            "Added objects for reporting negotiated traffic parameters.
"

    REVISION        "9705260000Z"
    DESCRIPTION            "Added objects for management of new features made possible
             on the LS1010 by the Feature Card Plus.  This includes
             support for:
                -  per-VC queueing hardware structures,
                - enhanced UPC, 
                - per-connection snooping,
                - enhanced per-connection statistics.
"
     REVISION        "9611010000Z"
     DESCRIPTION            "Added 
                - VPL/VCL violation counter, 
                - SVC frame discard using AAL5IE, 
                - default VPL/VCL tolerance 
             objects.
" 
     REVISION        "9807260000Z"
     DESCRIPTION            "Added
                - object to configure a VP leg as a 
                  hierarchical VP.
"
        ::= { ciscoExperiment 13 }    -- assigned by cana@cisco.com

--
-- Caution.  This MIB is temporary and experimental.
-- In the future will be removed from products,
-- perhaps with short notice, in favor of more standard
-- or generic MIBs.  Application developers should not
-- depend on long-term access to this MIB.
--

ciscoAtmConnMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmConnMIB 1 }

CastType ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Specifies the type of the connection. It can be either a point 
         to point connection or point to multipoint root or leaf.
"
        SYNTAX    INTEGER  {
                    pointToPoint(1),
                    pointToMultiPointRoot(2),
                    pointToMultiPointLeaf(3)
                  }

ConfigType ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Specifies whether it's a permanent, switched, soft or 
         soft passive config type.
"
        SYNTAX     INTEGER { 
                     other(1),
                     permanent(2), 
                     switch(3),
                     soft(4),
                     softPassive(5)                 
                   }

SpanType ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "The SpanType textual convention is used to specify different 
         connection span types.
         The connection span types are:

         - 'unknown', which indicates that the connection entry is not 
         cross-connected.

         - 'transit', which indicates that the connection entry is 
         cross-connected and is not a connection end point.

         - 'terminate', which indicates that the connection entry is 
         cross-connected and is a connection end point.

         - 'both', which indicates that the connection is transit as 
         well as terminating. This will be true only if the connection 
         cast type is a pointToMultiPointRoot and has transit and 
         terminating connection leaves.

        None of the above values may be specified in a management 
        protocol set operation.
"
        SYNTAX    INTEGER  {
                    unknown(1),         -- not installed
                    transit(2),
                    terminate(3),
                    both(4)     -- p2mp root
                  }

EnableStatus ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Enable or Disable operation.
"
        SYNTAX     INTEGER { enable(1), disable(2) }

UpcStatus ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Define the Usage Parameter Control (UPC) operation as one of 
         pass,tag or drop at this connection.
"
        SYNTAX    INTEGER  {
                passing(1),
                tagging(2),
                dropping(3),
                localShaping(4)
                }

ConnState ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "The ConnState textual convention is used to specify different 
         connection states. 
         The connections states are:

         - 'setup', which indicates that the connection entry is to be 
         created and installed in the hardware and software connection 
         tables. 

         - 'release', which indicates that the connection entry is to 
         be removed from the hardware and software connection tables.

         - 'notInstalled', which indicates connection entry is created 
         only in the software connection tables. The connection entry is 
         not installed in the hardware connection table.

         - 'down' which indicates that connection is down and is present 
         in both software and hardware connection tables.

         - 'up' which indicates that connection is up and is present 
         in both software and hardware connection tables.

        -  'setup' and 'release' are only two values may be specified 
        in a management protocol set operation, only three values will 
        be returned in response to a management protocol retrieval 
        operation: 'notInstalled', 'down' or 'up'.
"

        SYNTAX  INTEGER {
                        setup(1),
                        release(2),
                        notInstalled(3),
                        down(4),       
                        up(5)         
                        }

Location ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Location of calling or called or unknown.
"
        SYNTAX  INTEGER {
                        unknown(1),
                        calling(2),
                        called(3)
                        }

Direction ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Calling or called side associated with address.
"
        SYNTAX  INTEGER {
                        unknown(1),
                        p2pCallingSide(2),
                        p2pCalledSide(3),
                        p2mpRoot(4),
                        p2mpLeaf(5)
                        }

SnoopDirType ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION        "Direction of Snooped Traffic
"
        SYNTAX  INTEGER {
                        transmit(1),
                        receive(2)
                        }

-- This group is an extension of VPL table 

ciscoAtmVpl OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 1 }

ciscoAtmVplTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmVplEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "The Virtual Path Link extension Table.
"
        ::= { ciscoAtmVpl 1 }

ciscoAtmVplEntry OBJECT-TYPE
        SYNTAX     CiscoAtmVplEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        " An entry in the Vpl table.This entry is used to model
        a bi-directional Vpl. This table augments the atmVplTable 
        defined in RFC 1695. However it uses ifIndex and atmVplVpi 
        as an Index for historical reasons. The entries are 
        created/deleted as a by-product of creating and deleting 
        entries in the atmVplTable.
"
        INDEX { ifIndex,atmVplVpi }
        ::= { ciscoAtmVplTable 1 }

CiscoAtmVplEntry ::=
        SEQUENCE {
        -- config info
        ciscoAtmVplCastType             CastType,
        ciscoAtmVplSpanType             SpanType,
        ciscoAtmVplConfigType           ConfigType,
        ciscoAtmVplRxUpcMode            UpcStatus,
        -- connection state 
        ciscoAtmVplConnState            ConnState,
        -- oam config info
        ciscoAtmVplOamLoopbkTxInterval  Integer32,
        ciscoAtmVplOamSegmentLoopback       EnableStatus,
        ciscoAtmVplOamEndLoopback       EnableStatus,
        ciscoAtmVplOamAisEnable         EnableStatus,
        ciscoAtmVplOamRdiEnable         EnableStatus,
        -- per vc statistics
        ciscoAtmVplInstallTime          TimeStamp,
        ciscoAtmVplInCells              Counter32,
        ciscoAtmVplOutCells             Counter32,
        -- cross side connection info
        ciscoAtmVplCrossIfIndex         InterfaceIndexOrZero,
        ciscoAtmVplCrossVpi             Integer32,
        ciscoAtmVplNextLeafIfIndex      InterfaceIndexOrZero,
        ciscoAtmVplNextLeafVpi          Integer32,
        -- soft PVP 
        ciscoAtmVplRemoteAddr           NsapAtmAddr,
        ciscoAtmVplRemoteVpi            Integer32,
        ciscoAtmVplLocation             Location,
        ciscoAtmVplSlowRetryIntv        Integer32,
        ciscoAtmVplNumAttempts          Counter32,
        ciscoAtmVplLastReleaseCause     Integer32,
        -- logical port
        ciscoAtmVplLogicalPortDef       INTEGER,
        ciscoAtmVplLogicalPortIndex     InterfaceIndexOrZero,
        -- per vc violation stats
        ciscoAtmVplUpcViolations        Counter32,
        ciscoAtmVplEpdTpdCellDrops      Counter32,
        ciscoAtmVplEpdTpdPacketDrops    Counter32,
        ciscoAtmVplEpdTpdPacketsIn      Counter32,
        ciscoAtmVplClp1Drops            Counter32,
        -- default tolerance
        ciscoAtmVplDefaultRxUpcTolerance Integer32,
        ciscoAtmVplDefaultRxUpcVbrCdvt   Integer32,

        -- lightstream per-vc queueing 
        --  switch chipset objects
        ciscoAtmVplLsPerVcqWrrWeight       INTEGER,
        ciscoAtmVplLsPerVcqTunnelIsShaped  TruthValue,
        ciscoAtmVplLsPerVcqXmtQueuedCells  Gauge32,
        ciscoAtmVplLsPerVcQThreshGrp       LsPerVcqThresholdGroup,
 
        -- feature card per-flow queueing
        --  (FC-PFQ) per-VPL statistics objects
        ciscoAtmVplInClp0Cells             Counter32,
        ciscoAtmVplInClp1Cells             Counter32,
        ciscoAtmVplOutClp0Cells            Counter32,
        ciscoAtmVplOutClp1Cells            Counter32,
        ciscoAtmVplCellDrops               Counter32,
        ciscoAtmVplClp0VcqFullCellDrops    Counter32,
        ciscoAtmVplVcqClpThreshCellDrops   Counter32,

        -- feature card per-flow queueing
        -- Hierarchical VP-Tunnel
        ciscoAtmVplLsPerVcqTunnelIsHierarchical  TruthValue,

        -- Objects for negotiated traffic parameters
        ciscoAtmVplRxNegTraffDescrIndex    AtmTrafficDescrParamIndex,
        ciscoAtmVplTxNegTraffDescrIndex    AtmTrafficDescrParamIndex,

        -- Switch Fabric Tx Statistics 
        ciscoAtmVplSwFabOutCells           Counter32,
        ciscoAtmVplSwFabOutClp0Cells       Counter32,
        ciscoAtmVplSwFabOutClp1Cells       Counter32,

        -- Connection info
        ciscoAtmVplConnName                SnmpAdminString,
        ciscoAtmVplConnType                INTEGER 
 
    }


ciscoAtmVplCastType    OBJECT-TYPE
        SYNTAX         CastType
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Vpl type is either a point to point connection or point 
        to multipoint root or leaf.
"
        DEFVAL { pointToPoint }
        ::= { ciscoAtmVplEntry 1 }

ciscoAtmVplSpanType    OBJECT-TYPE
        SYNTAX         SpanType
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        " Vpl span is either a transit one or a terminating one.
"
        DEFVAL { transit }
        ::= { ciscoAtmVplEntry 2 }

ciscoAtmVplConfigType    OBJECT-TYPE
        SYNTAX         ConfigType
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Vpl type is either a PVC, SVC, Soft PVC or Soft Passive half leg.
          The half leg can be set to Passive through user configuration only.
"
        DEFVAL { permanent }
        ::= { ciscoAtmVplEntry 3 }

ciscoAtmVplRxUpcMode    OBJECT-TYPE
        SYNTAX         UpcStatus
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Usage Parameter Control opeartion is pass,tag,drop or 
        local shaping at this connection.
"
        DEFVAL { passing }
        ::= { ciscoAtmVplEntry 4 }

ciscoAtmVplConnState OBJECT-TYPE
        SYNTAX       ConnState
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION           "The connection state of this VPL. 
"
        ::= { ciscoAtmVplEntry 5 }

ciscoAtmVplOamLoopbkTxInterval OBJECT-TYPE
        SYNTAX        Integer32 (5..60)
        UNITS         "seconds"
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Frequency of OAM loopback cells generated.
"
        DEFVAL { 5 }
        ::= { ciscoAtmVplEntry 6 }

ciscoAtmVplOamSegmentLoopback OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable segment loopback on this virtual path.
"
        DEFVAL { disable }
        ::= { ciscoAtmVplEntry 7 }

ciscoAtmVplOamEndLoopback OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable end to end loopback on this virtual path.
"
        DEFVAL { disable }
        ::= { ciscoAtmVplEntry 8 }

ciscoAtmVplOamAisEnable OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable Alarm Indication Signal OAM cell generation
         if the interafce goes down on a crossconnect virtual path.
"
        DEFVAL { disable }
        ::= { ciscoAtmVplEntry 9 }

ciscoAtmVplOamRdiEnable OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable Remote Defect Indication OAM cell generation
         if an Alarm Indication Signal OAM cell is received.
"
        DEFVAL { disable }
        ::= { ciscoAtmVplEntry 10 }

ciscoAtmVplInstallTime OBJECT-TYPE
        SYNTAX        TimeStamp
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION           "The time stamp derived from sysUpTime when this VPL gets 
         created. The VPL entries are created/deleted as a by-product 
         of creating and deleting entries in the atmVplTable defined 
         in RFC1695.
"
        ::= { ciscoAtmVplEntry 11 }

ciscoAtmVplInCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells received on this         VPL.
"
        ::= { ciscoAtmVplEntry 12 }

ciscoAtmVplOutCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells transmitted on         this VPL.
"
        ::= { ciscoAtmVplEntry 13 }

ciscoAtmVplCrossIfIndex    OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "For point to point, this is the cross-connected VPL's 
        ifIndex of this VPL. For point to multi-point connection, 
        this will be the root VPL's ifIndex for a leaf VPL entry in 
        the multicast chain, or it's the 1st leaf for a root VPL entry. 
        If it's zero, it means it's not cross-connected yet. 
        Atomically set ciscoAtmVplConnState, ciscoAtmVplCrossIfIndex 
        and ciscoAtmVplCrossVpi will create or delete a cross 
        connection to crossed half leg of this ciscoAtmVplCrossIfindex 
        and ciscoAtmVplCrossVpi for p2p PVP, or add or drop a multicast 
        connection of this ciscoAtmVplCrossIfindex and 
        ciscoAtmVplCrossVpi to/from the root on the multicast chain 
        for p2mp PVP.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVplEntry 14 }

ciscoAtmVplCrossVpi    OBJECT-TYPE
        SYNTAX         Integer32  (0..4095)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "This specifies the VPI value of the VPL to which this VPL is
         cross-connected. For point to multi-point connection, this is
         the root VPL's VPI for the leaf entry. Similarly it is the
         1st leaf's VPI value for the root entry.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVplEntry 15 }

ciscoAtmVplNextLeafIfIndex    OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "For point to point, this is zero i.e. not used. 
        For point to multi-point connection, this will be the next 
        leaf VPL's ifIndex on the multicast chain. This will be 0 
        if this is the root VPL entry. If it's zero for a leaf VPL,
        it means this is the last leaf.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVplEntry 16 }

ciscoAtmVplNextLeafVpi    OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "For point to point, this is zero i.e. not used. 
        This apply only to point to multi-point connection, 
        this will be the next leaf VPL's VPI on the multicast chain.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVplEntry 17 }

ciscoAtmVplRemoteAddr    OBJECT-TYPE
        SYNTAX         NsapAtmAddr
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVP target address if this is the calling side
        Soft PVP source address if this is called side. 
        Atomically set ConnState, RemoteAddr
        and RemoteVpi will create or delete a soft PVP. 
        Atomically set ConnState, RemoteAddr without RemoteVpi will 
        also create or delete a soft PVP but let target switch 
        assign the vpi.
"
        ::= { ciscoAtmVplEntry 18 }

ciscoAtmVplRemoteVpi    OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVP target VPI in calling side. 0 in called side.
"
        ::= { ciscoAtmVplEntry 19 }

ciscoAtmVplLocation OBJECT-TYPE
        SYNTAX         Location
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Indicate calling or called side of a soft PVP.
         If ciscoAtmVplConfigType is not soft then 
        ciscoAtmVplLocation value should be ignored.
"
        ::= { ciscoAtmVplEntry 20 }

ciscoAtmVplSlowRetryIntv OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVP slow retry interval time in seconds.
"
        ::= { ciscoAtmVplEntry 21 }

ciscoAtmVplNumAttempts OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Number of retries made to install this soft PVP 
        connection. If ciscoAtmVplConfigType is not soft then 
        ciscoAtmVplNumAttempts value should be ignored.
"
        ::= { ciscoAtmVplEntry 22 }

ciscoAtmVplLastReleaseCause  OBJECT-TYPE
        SYNTAX        Integer32(1..127)
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Value of the Cause field of the Cause
        Information Element in the last Release
        Signalling message received for this SPVP.
        Indicates the reason for the Release.
        ciscoAtmVplConfigType is not soft then 
        ciscoAtmVplLastReleaseCause value should be ignored.
"
        REFERENCE
       "ATM Forum's UNI3.0/3.1 Speicifcation"
        ::= { ciscoAtmVplEntry 23 }

ciscoAtmVplLogicalPortDef   OBJECT-TYPE
        SYNTAX  INTEGER {
                         notLogicalIf(1),
                         isLogicalIf(2)
                         }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION        "Indicates whether the VPC at this VPL interface
        is an Atm Logical Port interface.
"
        DEFVAL { notLogicalIf }
        ::= { ciscoAtmVplEntry 24 }

ciscoAtmVplLogicalPortIndex OBJECT-TYPE
        SYNTAX  InterfaceIndexOrZero
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION        "The ifTable index of the Atm logical port
        interface associated with this VPL. Only valid if
        the value of atmVplLogicalPortDef is isLogicalIf,
        and the VPL row is active.
"
        ::= { ciscoAtmVplEntry 25 }

ciscoAtmVplUpcViolations OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION           "The total number of nonconforming cells detected
         by Usage Parameter Control (UPC) for cells received
         on this VPL.
         On LS1010 systems, this counter is valid only if
         equipped with the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 26 }

ciscoAtmVplEpdTpdCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
       DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVplEntry 27 }

ciscoAtmVplEpdTpdPacketDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
        DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVplEntry 28 }

ciscoAtmVplEpdTpdPacketsIn OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
        DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVplEntry 29 }

ciscoAtmVplClp1Drops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
        DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVplEntry 30 }

ciscoAtmVplDefaultRxUpcTolerance OBJECT-TYPE
        SYNTAX         Integer32  
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "If the tolerance (CDVT for CBR, ABR, UBR connections, Maximum 
         Burst Size for VBR connectons)  requested for Usage 
         Parameter Control is not explicitly specified in VPL creation, 
         this object contains the default that is used. If tolerance
         is explicitly specified in VPL creation, it can be found in
         the Traffic Table row specified by atmVplReceiveTrafficDescrIndex,
         and the value of this object is -1.
"
        ::= { ciscoAtmVplEntry 31 }

ciscoAtmVplDefaultRxUpcVbrCdvt  OBJECT-TYPE
        SYNTAX         Integer32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "If the Cell Delay Variation Tolerance (CDVT) requested for 
         Usage Parameter Control for a VBR connection is not explicitly 
         specified in VPL creation, this object contains the default 
         that is used. If CDVT is explicitly specified in VPL creation, 
         it can be found in the Traffic Table row specified by 
         atmVplReceiveTrafficDescrIndex, and the value of this object 
         is -1.
"
        ::= { ciscoAtmVplEntry 32 }

ciscoAtmVplLsPerVcqWrrWeight OBJECT-TYPE
        SYNTAX         INTEGER (1..15)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Configure the weighting specified for a VP half-leg
         within a service class to make the scheduling decision
         among other active VPLs in the service class. This
         is for transmit on the VPL on the interface. This
         parameter only applies to transit VPs. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVplEntry 33 }
 
ciscoAtmVplLsPerVcqTunnelIsShaped OBJECT-TYPE
        SYNTAX         TruthValue
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Determines whether this is to be a -shaped- VP, per
         the Lightstream per-VC queueing chipset. If the value 
         specified is TRUE, the VP is to be a shaped VP Tunnel. 
         Such a VP cannot be cross-connected. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVplEntry 34 }
 
ciscoAtmVplLsPerVcqXmtQueuedCells OBJECT-TYPE
        SYNTAX         Gauge32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Number of cells received on this VPL and
         residing on the per-connection queue. Note that 
         this value is not valid until the VPL is in an 
         active cross-connect. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVplEntry 35 }
 
ciscoAtmVplLsPerVcQThreshGrp OBJECT-TYPE
        SYNTAX     LsPerVcqThresholdGroup
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION        "The Threshold Group to which the cell-queue for 
         cells received by this VP are queued. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
         ::= { ciscoAtmVplEntry 36 }

ciscoAtmVplInClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         received on this VPL. Note that these cells may
         subsequently be discarded.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 37 }
 
ciscoAtmVplInClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set
         received on this VPL. Note that these cells may
         subsequently be discarded.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 38 }
 
ciscoAtmVplOutClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         transmitted on this VPL.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 39 }
 
ciscoAtmVplOutClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set
         transmitted on this VPL.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 40 }
 
ciscoAtmVplCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VPL, but discarded.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 41 }
 
ciscoAtmVplClp0VcqFullCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VPL with the CLP bit clear, discarded because
         the per-VC queue limit is exceeded.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 43 }
 
ciscoAtmVplVcqClpThreshCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VPL, discarded because the discard threshold
         (as opposed to the queue-limit) is exceeded
         on the per-VC queue, and the CLP bit is set.
         This counter is valid only:
          - if the VPL is not a Logical Interface (tunnel).
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVplEntry 44 }

ciscoAtmVplLsPerVcqTunnelIsHierarchical OBJECT-TYPE
        SYNTAX         TruthValue
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Determines whether this is to be a -Hierarchical- VP, per
         the Lightstream per-VC queueing chipset. If the value
         specified is TRUE, the VP is to be a Hierarchical VP Tunnel.
         Such a VP cannot be cross-connected. This object
         is defined on a LS1010 only when the switch is equipped with
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVplEntry 45 }

ciscoAtmVplRxNegTraffDescrIndex   OBJECT-TYPE
        SYNTAX             AtmTrafficDescrParamIndex
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION        "Identifies the entry in the atmTrafficDescrParamTable which
        contains negotiated traffic parameters applied to the receive
        direction of this VPL.

        This object is not instantiated if this VPL is not the calling
        side of a soft VP, or if there was no traffic negotiation.
"
        ::= { ciscoAtmVplEntry 46}
 
ciscoAtmVplTxNegTraffDescrIndex    OBJECT-TYPE
        SYNTAX             AtmTrafficDescrParamIndex
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION        "Identifies the entry in the atmTrafficDescrParamTable which
        contains negotiated traffic parameters applied to the transmit
        direction of this VPL.

        This object is not instantiated if this VPL is not the calling
        side of a soft VP, or if there was no traffic negotiation.
"
        ::= { ciscoAtmVplEntry 47}

ciscoAtmVplSwFabOutCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells transmitted on        this VPL by the Switch Fabric. This object is not 
        instantiated on systems that do not have support for 
        collecting such statistics.
"
        ::= { ciscoAtmVplEntry 48 }

ciscoAtmVplSwFabOutClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         transmitted on this VPL by the Switch Fabric.  This object
         is not instantiated for a VPL that is a logical interface
         (VP Tunnel).  This object is not instantiated on systems 
         that do not have support for collecting such statistics.
"
        ::= { ciscoAtmVplEntry 49 }
 
ciscoAtmVplSwFabOutClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set transmitted
         on this VPL by the Switch Fabric. This object is not 
         instantiated for a VPL that is a logical interface
         (VP Tunnel).  This object is not instantiated on systems 
         that do not have support for collecting such statistics.
"
        ::= { ciscoAtmVplEntry 50 }
 
ciscoAtmVplConnName OBJECT-TYPE
        SYNTAX        SnmpAdminString
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION        "A human readable string that identifies this connection.
         This object will return a zero-length string if value is
         not set.
" 
        ::= { ciscoAtmVplEntry 51 }
 
ciscoAtmVplConnType OBJECT-TYPE
        SYNTAX        INTEGER {
                         local (1),     -- within a node
                         endToEnd (2)   -- across several nodes
                      }
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION        "This object represent the PVP Type for this connection.
         - local       connection within the node
         - endToEnd    across several nodes
         This object serves as an information object for a
         management system and has no functional meaning to
         the switch.
"
        ::= { ciscoAtmVplEntry 52 }

-- This group is an extension of VCL table 

ciscoAtmVcl OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 2 }

ciscoAtmVclTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmVclEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "The Virtual Channel Link extension Table.
"
        ::= { ciscoAtmVcl 1 }

ciscoAtmVclEntry OBJECT-TYPE
        SYNTAX     CiscoAtmVclEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        " An entry in the Vcl table.This entry is used to model
        a bi-directional Vcl. This table augments the atmVclTable 
        defined in RFC 1695. However it uses ifIndex, atmVclVpi 
        and atmVclVci as an Index for historical reasons.
        The entries are created/deleted as a by-product of 
        creating and deleting entries in the atmVclTable.
"
        INDEX { ifIndex,atmVclVpi,atmVclVci }
        ::= { ciscoAtmVclTable 1 }

CiscoAtmVclEntry ::=
    SEQUENCE {
        -- config info
        ciscoAtmVclCastType             CastType,
        ciscoAtmVclSpanType             SpanType,
        ciscoAtmVclConfigType           ConfigType,
        ciscoAtmVclRxUpcMode            UpcStatus,
        ciscoAtmVclEpdEnable            INTEGER,
        -- connection state 
        ciscoAtmVclConnState            ConnState,
        -- oam config info
        ciscoAtmVclOamLoopbkTxInterval  Integer32,
        ciscoAtmVclOamSegmentLoopback       EnableStatus,
        ciscoAtmVclOamEndLoopback       EnableStatus,
        ciscoAtmVclOamAisEnable         EnableStatus,
        ciscoAtmVclOamRdiEnable         EnableStatus,
        -- per vc statistics
        ciscoAtmVclInstallTime          TimeStamp,
        ciscoAtmVclInCells              Counter32,
        ciscoAtmVclOutCells             Counter32,
        -- cross side connection info
        ciscoAtmVclCrossIfIndex         InterfaceIndexOrZero,
        ciscoAtmVclCrossVpi             Integer32,
        ciscoAtmVclCrossVci             Integer32,
        ciscoAtmVclNextLeafIfIndex      InterfaceIndexOrZero,
        ciscoAtmVclNextLeafVpi          Integer32,
        ciscoAtmVclNextLeafVci          Integer32,
        -- vc terminating info
        ciscoAtmVclAalEncapFlag         INTEGER,
        ciscoAtmVclAalEncapProtocol     INTEGER,
        ciscoAtmVclAalUserVcType        INTEGER,
        ciscoAtmVclAtmInArpInterval     Integer32,
        -- soft PVC
        ciscoAtmVclRemoteAddr           NsapAtmAddr,
        ciscoAtmVclRemoteVpi            Integer32,
        ciscoAtmVclRemoteVci            Integer32,
        ciscoAtmVclLocation             Location,
        ciscoAtmVclSlowRetryIntv        Integer32,
        ciscoAtmVclNumAttempts          Counter32,
        ciscoAtmVclLastReleaseCause     Integer32,
        -- per vc violation stats
        ciscoAtmVclUpcViolations        Counter32,
        ciscoAtmVclEpdTpdCellDrops      Counter32,
        ciscoAtmVclEpdTpdPacketDrops    Counter32,
        ciscoAtmVclEpdTpdPacketsIn      Counter32,
        ciscoAtmVclClp1Drops            Counter32,
        -- default tolerance
        ciscoAtmVclDefaultRxUpcTolerance Integer32,
        ciscoAtmVclDefaultRxUpcVbrCdvt   Integer32,

        -- lightstream per-vc queueing
        --  switch chipset objects
        ciscoAtmVclLsPerVcqWrrWeight       INTEGER,
        ciscoAtmVclLsPerVcqXmtQueuedCells  Gauge32,
        ciscoAtmVclLsPerVcQThreshGrp       LsPerVcqThresholdGroup,

        -- feature card per-flow queueing
        --  (FC-PFQ) per-VCL statistics objects
        ciscoAtmVclInClp0Cells             Counter32,
        ciscoAtmVclInClp1Cells             Counter32,
        ciscoAtmVclOutClp0Cells            Counter32,
        ciscoAtmVclOutClp1Cells            Counter32,
        ciscoAtmVclCellDrops               Counter32,
        ciscoAtmVclClp0VcqFullCellDrops    Counter32,
        ciscoAtmVclVcqClpThreshCellDrops   Counter32,
        
        -- Objects for negotiated traffic parameters
        ciscoAtmVclRxNegTraffDescrIndex   AtmTrafficDescrParamIndex,
        ciscoAtmVclTxNegTraffDescrIndex   AtmTrafficDescrParamIndex,

        -- Switch Fabric Tx Statistics 
        ciscoAtmVclSwFabOutCells           Counter32,
        ciscoAtmVclSwFabOutClp0Cells       Counter32,
        ciscoAtmVclSwFabOutClp1Cells       Counter32,

        -- Connection Info
        ciscoAtmVclConnName                SnmpAdminString,
        ciscoAtmVclConnType                INTEGER
    }

ciscoAtmVclCastType    OBJECT-TYPE
        SYNTAX         CastType
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Vcl type is either a point to point connection or point 
        to multipoint root or leaf.
"
        DEFVAL {pointToPoint }
        ::= { ciscoAtmVclEntry 1 }

ciscoAtmVclSpanType    OBJECT-TYPE
        SYNTAX         SpanType
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        " Vcl span is either a transit one or a terminating one.
"
        DEFVAL { transit }
        ::= { ciscoAtmVclEntry 2 }

ciscoAtmVclConfigType  OBJECT-TYPE
        SYNTAX         ConfigType
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Vcl type is either a PVC, SVC, Soft PVC or Soft Passive half leg.
          The half leg can be set to Passive through user configuration only.
"
        DEFVAL { permanent }
        ::= { ciscoAtmVclEntry 3 }

ciscoAtmVclRxUpcMode   OBJECT-TYPE
        SYNTAX         UpcStatus
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Usage Parameter Control opeartion is pass,tag,drop or 
        local shaping at this connection.
"
        DEFVAL { passing }
        ::= { ciscoAtmVclEntry 4 }

ciscoAtmVclEpdEnable   OBJECT-TYPE
        SYNTAX         INTEGER {
                                enable(1),
                                disable(2),
                                useTrafficDescr(3)
                               }

        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        " Early Packet Discard option used for this VCL.
          The use is as follows:
          enable(1)
             Packet-discard is enabled.
          disable(2)
             Packet-discard is disabled.
          useTrafficDescr(3)
             Packet-discard in the receive direction is as specified by
             the atmTrafficFrameDiscard value in row corresponding to
             atmVclReceiveTrafficDescrIndex.  For VCLs of type
             spvcInitiator, the packet-discard in the reverse direction
             is as specified by the atmTrafficFrameDiscard value in row
             corresponding to atmVclTransmitTrafficDescrIndex. 
"
        DEFVAL { useTrafficDescr }
        ::= { ciscoAtmVclEntry 5 }

ciscoAtmVclConnState  OBJECT-TYPE
        SYNTAX        ConnState
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "The connection state of this VCL.
"
        ::= { ciscoAtmVclEntry 6 }

ciscoAtmVclOamLoopbkTxInterval OBJECT-TYPE
        SYNTAX        Integer32 (5..60)
        UNITS         "seconds"
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Frequency of OAM loopback cell are generated on this 
        virtual channel.
"
        DEFVAL { 5 }
        ::= { ciscoAtmVclEntry 7 }

ciscoAtmVclOamSegmentLoopback OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable segment loopback on this virtual channel.
"
        DEFVAL { disable }
        ::= { ciscoAtmVclEntry 8 }

ciscoAtmVclOamEndLoopback OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable end to end loopback on this virtual channel.
"
        DEFVAL { disable }
        ::= { ciscoAtmVclEntry 9 }

ciscoAtmVclOamAisEnable OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable Alarm Indication Signal OAM cell generation
         if the interafce goes down on a crossconnect virtual 
         channel.
"
        DEFVAL { disable }
        ::= { ciscoAtmVclEntry 10 }

ciscoAtmVclOamRdiEnable OBJECT-TYPE
        SYNTAX        EnableStatus
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION           "Enable Remote Defect Indication OAM cell generation
         if an Alarm Indication Signal OAM cell is received.
"
        DEFVAL { disable }
        ::= { ciscoAtmVclEntry 11 }

ciscoAtmVclInstallTime OBJECT-TYPE
        SYNTAX        TimeStamp
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION           "The time stamp derived from sysUpTime when this VCL gets 
         created. The VCL entries are created/deleted as a by-product 
         of creating and deleting entries in the atmVclTable defined 
         in RFC1695.
"
        ::= { ciscoAtmVclEntry 12 }

ciscoAtmVclInCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells received on         this VCL.
"
        ::= { ciscoAtmVclEntry 13 }

ciscoAtmVclOutCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells transmitted on         this VCL.
"
        ::= { ciscoAtmVclEntry 14 }

ciscoAtmVclCrossIfIndex    OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "For point to point, this is the cross-connected VCL's 
        ifIndex of this VCL. For point to multi-point connection, 
        this will be the root VCL's ifIndex for a leaf VCL entry in 
        the multicast chain, or it's the 1st leaf VCL for a root 
        VCL entry. If it's zero, it means it's not cross-connected 
        yet. Atomically set ciscoAtmVclConnState, 
        ciscoAtmVclCrossIfindex, ciscoAtmVclCrossVpi and 
        ciscoAtmVclCrossVci will create or delete a cross 
        connection to crossed half leg of this 
        ciscoAtmVclCrossIfindex, ciscoAtmVclCrossVpi and 
        ciscoAtmVclCrossVci for p2p PVC, or add or drop a multicast 
        connection to/from the root of this ciscoAtmVclCrossIfindex, 
        ciscoAtmVclCrossVpi and ciscoAtmVclCrossVci on the multicast 
        chain for p2mp PVC.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 15 }

ciscoAtmVclCrossVpi    OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "This specifies the VPI value of the VCL to which this 
        VCL is cross-connected. For point to multi-point 
        connection, this is the root VCL's VPI for the leaf entry. 
        Similarly it is the 1st leaf's VPI value for the root entry.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 16 }

ciscoAtmVclCrossVci    OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "This specifies the VCI value of the VCL to which this 
        VCL is cross-connected. For point to multi-point 
        connection, this is the root VCL's VCI for the leaf 
        entry. Similarly it is the 1st leaf's VCI value for 
        the root entry.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 17 }

ciscoAtmVclNextLeafIfIndex    OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "For point to point, this is zero i.e. not used. 
        For point to multi-point connection, this will be 
        the next leaf VCL's ifIndex on the multicast chain. 
        This will be 0 if this is the root VCL entry. 
        If it's zero for a leaf VCL, it means this is the 
        last leaf.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 18 }

ciscoAtmVclNextLeafVpi    OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "For point to point, this is zero i.e. not used. 
        This apply only to point to multi-point connection, 
        this will be the next leaf VCL's VPI on the multicast 
        chain.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 19 }

ciscoAtmVclNextLeafVci    OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "For point to point, this is zero i.e. not used. 
        This apply only to point to multi-point connection, 
        this will be the next leaf VCL's VCI on the multicast 
        chain.
"
        DEFVAL { 0 }
        ::= { ciscoAtmVclEntry 20 }

ciscoAtmVclAalEncapFlag OBJECT-TYPE
        SYNTAX    INTEGER {
                        other(1),
                        aal5Snap(2),
                        aal5Nlpid(3),
                        aal5FrNlpid(4),
                        aal5Mux(5),
                        aal34Smds(6),
                        aalQsAal(7), -- Signalling AAL
                        aal5Ilmi(8),
                        aal5Lane(9),
                        aal5Pnni(10)
                        }
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Encapsulation type for terminating VC.
"
        ::= { ciscoAtmVclEntry 21 }

ciscoAtmVclAalEncapProtocol OBJECT-TYPE
        SYNTAX    INTEGER {
                        other(1),
                        ip(2),
                        xns(3),
                        appletalk(4),
                        clns(5),
                        decnet(6),
                        novell(7),
                        apollo(8),
                        vines(9)
                        }
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Protocol for terminating VC if EncapFlag is aal5Mux.
"
        ::= { ciscoAtmVclEntry 22 }

ciscoAtmVclAalUserVcType OBJECT-TYPE
        SYNTAX    INTEGER {
                        other(1),
                        boxConfigure(2),
                        busForward(3),
                        busSend(4), 
                        clientConfigure(5),
                        clientData(6),
                        clientDirect(7),
                        clientDistribute(8),
                        clientForward(9),
                        clientSend(10),
                        configure(11),
                        serverConfigure(12),
                        serverDirect(13),
                        serverDistribute(14)
                  }
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Following is the list of user virtual circuit types in 
         case aal5Lane encapusation on this virtual channel.
         boxConfigure -- The shared Server/Client end of a 
                         Configure VCC
         busForward -- The BUS end of the Data Forward VCC
         busSend -- The BUS end of the Data Send VCC
         clientConfigure -- The LE Client end of the Configure 
                            Direct VCC
         clientData -- One end of the Data Direct VCC
         clientDirect -- The LE Client end of the Control 
                         Direct VCC
         clientDistribute -- The LE Client end of the Control 
                             Distribute VCC
         clientForward -- The LE Client end of the Multicast 
                          Forward VCC
         clientSend -- The LE Client end of the Multicast 
                       Send VCC
         configure -- The Config Server end of any Configure VCC
         serverConfigure -- The LE Server end of the Configure VCC
         serverDirect -- The LE Server end of the Control 
                         Direct VCC.
"

        ::= { ciscoAtmVclEntry 23 }

ciscoAtmVclAtmInArpInterval OBJECT-TYPE
        SYNTAX         Integer32 (0..60)
        UNITS          "minutes"
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Time interval in minutes to send InArp on a PVC for 
        IP over ATM.  0 will disable the InArp for this pvc.
"
        ::= { ciscoAtmVclEntry 24 }



ciscoAtmVclRemoteAddr    OBJECT-TYPE
        SYNTAX         NsapAtmAddr
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVC target address if this is the calling side
        Soft PVC source address if this is called side. 
        Atomically set ConnState, RemoteAddr, RemoteVpi
        and RemoteVci will create or delete a soft PVC. 
        Atomically set ConnState, RemoteAddr without RemoteVpi,
        Remote Vci  will also create or delete a soft PVC but let 
        target switch assign the vpi and vci.
"
        ::= { ciscoAtmVclEntry 25 }

ciscoAtmVclRemoteVpi   OBJECT-TYPE
        SYNTAX         Integer32  (0..4095)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVC target VPI in calling side. 0 in called side.
"
        ::= { ciscoAtmVclEntry 26 }

ciscoAtmVclRemoteVci    OBJECT-TYPE
        SYNTAX         Integer32  (0..65535)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVC target VCI in calling side. 0 in called side.
"
        ::= { ciscoAtmVclEntry 27 }

ciscoAtmVclLocation OBJECT-TYPE
        SYNTAX         Location
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Indicate calling or called side of a soft PVC.
         If ciscoAtmVclConfigType is not soft then 
         ciscoAtmVclLocation value should be ignored.
"
        ::= { ciscoAtmVclEntry 28 }

ciscoAtmVclSlowRetryIntv OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        UNITS          "seconds"
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Soft PVC slow retry interval in seconds.
"
        ::= { ciscoAtmVclEntry 29 }

ciscoAtmVclNumAttempts OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Number of retries made to install this soft PVC 
        connection.  If ciscoAtmVclConfigType is not soft then 
        ciscoAtmVclNumAttempts value should be ignored.
"
        ::= { ciscoAtmVclEntry 30 }

ciscoAtmVclLastReleaseCause  OBJECT-TYPE
        SYNTAX        Integer32(1..127)
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Value of the Cause field of the Cause
        Information Element in the last Release
        Signalling message received for this SPVC.
        Indicates the reason for the Release.
        ciscoAtmVclConfigType is not soft then 
        ciscoAtmVclLastReleaseCause value should be 
        ignored.
"
        ::= { ciscoAtmVclEntry 31 }

ciscoAtmVclUpcViolations OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of nonconforming cells detected
         by Usage Parameter Control (UPC) for cells received
         on this VCL.
         On LS1010 systems, this counter is valid only on those
         equipped with the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 32 }

ciscoAtmVclEpdTpdCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
        DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVclEntry 33 }

ciscoAtmVclEpdTpdPacketDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION           "The total number of EPD/TPD packet drops of
         packets received on this VCL.
         This counter is valid only:
          - if EPD is enabled on this VCL.
          - on LS1010 systems, only those equipped with 
            the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 34 }

ciscoAtmVclEpdTpdPacketsIn OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION           "The total number of packets received in their
         entirety on this VPL.
         This counter is valid only:
          - if EPD is enabled on this VCL.
          - on LS1010 systems, only those equipped with 
            the Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 35 }

ciscoAtmVclClp1Drops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        obsolete
        DESCRIPTION   "Never implemented.
"
        ::= { ciscoAtmVclEntry 37 }

ciscoAtmVclDefaultRxUpcTolerance OBJECT-TYPE
        SYNTAX         Integer32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "If the tolerance (CDVT for CBR, ABR, UBR connections, Maximum 
         Burst Size for VBR connectons) requested for Usage 
         Parameter Control is not explicitly specified in VCL creation, 
         this object contains the default that is used.If tolerance
         is explicitly specified in VCL creation, it can be found in
         the Traffic Table row specified by atmVclReceiveTrafficDescrIndex,
         and the value of this object is -1.
"
        ::= { ciscoAtmVclEntry 38 }

ciscoAtmVclDefaultRxUpcVbrCdvt  OBJECT-TYPE
        SYNTAX         Integer32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "If the Cell Delay Variation Tolerance (CDVT) requested for 
         Usage Parameter Control for a VBR connection is not explicitly 
         specified in VCL creation, this object contains the default 
         that is used. If CDVT is explicitly specified in VCL creation, 
         it can be found in the Traffic Table row specified by 
         atmVclReceiveTrafficDescrIndex, and the value of this object 
         is -1.
"
        ::= { ciscoAtmVclEntry 39 }

ciscoAtmVclLsPerVcqWrrWeight OBJECT-TYPE
        SYNTAX         INTEGER (1..15)
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Configure the weighting specified for a VC half-leg
         within a service class to make the scheduling decision
         among other active VCLs in the service class. This
         is for transmit on the VCL on the interface. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVclEntry 40 }
 
ciscoAtmVclLsPerVcqXmtQueuedCells OBJECT-TYPE
        SYNTAX         Gauge32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION        "Number of cells received on this VCL and
         residing on the per-connection queue. Note that 
         this value is not valid until the VCL is in an 
         active cross-connect. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
        ::= { ciscoAtmVclEntry 41 }
 
ciscoAtmVclLsPerVcQThreshGrp OBJECT-TYPE
        SYNTAX     LsPerVcqThresholdGroup
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION        "The Threshold Group to which the cell-queue 
         for cells received by this VC are queued. 
         Note that this value is not valid until the 
         VCL is in an active cross-connect. This object
         is defined only when the switch is equipped with 
         the Lightstream per-VC queueing chipset.
"
         ::= { ciscoAtmVclEntry 42 }

ciscoAtmVclInClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         received on this VCL. Note that these cells may
         subsequently be discarded.
         This counter is valid only:
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 43 }
 
ciscoAtmVclInClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set
         received on this VCL. Note that these cells may
         subsequently be discarded.
         This counter is valid only:
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 44 }
 
ciscoAtmVclOutClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         transmitted on this VCL.
         This counter is valid only:
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 45 }
 
ciscoAtmVclOutClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set
         transmitted on this VCL.
         This counter is valid only:
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 46 }
 
ciscoAtmVclCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VCL, but discarded.
         This counter is valid only:
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 47 }
 
ciscoAtmVclClp0VcqFullCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VCL with the CLP bit clear, discarded because
         the per-VC queue limit is exceeded.
         This counter is valid only:
          - if EPD is disabled on the VCL.
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 48 }
 
ciscoAtmVclVcqClpThreshCellDrops OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells received on this
         VCL, discarded because the discard threshold
         (as opposed to the queue-limit) is exceeded
         on the per-VC queue, and the CLP bit is set.
         This counter is valid only:
          - if EPD is disabled on the VCL.
          - on LS1010 systems, only those equipped with 
            Feature Card - Per Flow Queueing.
"
        ::= { ciscoAtmVclEntry 49 }

ciscoAtmVclRxNegTraffDescrIndex   OBJECT-TYPE
        SYNTAX             AtmTrafficDescrParamIndex
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION        "Identifies the entry in the atmTrafficDescrParamTable which
        contains negotiated traffic parameters applied to the receive
        direction of this VCL.

        This object is not instantiated if this VCL is not the calling
        side of a soft VC, or if there was no traffic negotiation.
"
        ::= { ciscoAtmVclEntry 50}
 
ciscoAtmVclTxNegTraffDescrIndex    OBJECT-TYPE
        SYNTAX             AtmTrafficDescrParamIndex
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION        "Identifies the entry in the atmTrafficDescrParamTable which
        contains negotiated traffic parameters applied to the transmit
        direction of this VCL.

        This object is not instantiated if this VCL is not the calling
        side of a soft VC, or if there was no traffic negotiation.
"
        ::= { ciscoAtmVclEntry 51}

ciscoAtmVclSwFabOutCells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The total number of cells transmitted on         this VCL by the Switch Fabric.  This object is not 
        instantiated on systems that do not have support for 
        collecting such statistics.
"
        ::= { ciscoAtmVclEntry 52 }

ciscoAtmVclSwFabOutClp0Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit clear
         transmitted on this VCL by the Switch Fabric.
         This object is not instantiated on systems 
         that do not have support for collecting such 
         statistics.
"
        ::= { ciscoAtmVclEntry 53 }
 
ciscoAtmVclSwFabOutClp1Cells OBJECT-TYPE
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "The total number of cells with the CLP bit set
         transmitted on this VCL by the Switch Fabric.
         This object is not instantiated on systems that 
         do not have support for collecting such statistics.
"
        ::= { ciscoAtmVclEntry 54 }
 
ciscoAtmVclConnName OBJECT-TYPE
        SYNTAX        SnmpAdminString
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION        "A human readable string that identifies this connection.
         This object will return a zero-length string if value is
         not set.
" 
        ::= { ciscoAtmVclEntry 55 }
 
ciscoAtmVclConnType OBJECT-TYPE
        SYNTAX        INTEGER {
                         local (1),     -- wthin a node
                         endToEnd (2)   -- across several nodes
                      }
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION        "This object represent the PVC Type for this connection.
         - local     connection within the node
         - endToEnd  across several nodes.
         This object serves as an information object for a
         management system and has no functional meaning to
         the switch.
"
        ::= { ciscoAtmVclEntry 56 }


-- SVP address table

ciscoAtmSvp OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 3 }

ciscoAtmSvpAddrTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmSvpAddrEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "Switched virtual path link address table.
"
        ::= { ciscoAtmSvp 1 }

ciscoAtmSvpAddrEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSvpAddrEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        " An entry in the Switched Vrtual Path address table.
"
        INDEX { ifIndex,ciscoAtmSvpAddr, ciscoAtmSvpVpi }
        ::= { ciscoAtmSvpAddrTable 1 }

CiscoAtmSvpAddrEntry ::=
        SEQUENCE {
        ciscoAtmSvpAddr         OCTET STRING,
        ciscoAtmSvpVpi          INTEGER,
        ciscoAtmSvpDirection    Direction
    }

ciscoAtmSvpAddr OBJECT-TYPE
        SYNTAX     OCTET STRING (SIZE(20)) 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "It depends on the direction.This could be p2pCallingSide 
        address on a called side VPL, or p2pCalledSide address on a 
        calling side VPL or p2mpRoot address on a p2mp leaf side 
        VPL or p2mpLeaf address on a p2mp root side VPL.
"
        ::= { ciscoAtmSvpAddrEntry 1 }

ciscoAtmSvpVpi OBJECT-TYPE
        SYNTAX    INTEGER  (1..4095)
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION        "This SVP's VPI value on this interface.
"
        ::= { ciscoAtmSvpAddrEntry 2 }

ciscoAtmSvpDirection OBJECT-TYPE
        SYNTAX     Direction
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION        "Indicate whether this VPL is calling side, called side, 
        root or leaf for this address.
"
        ::= { ciscoAtmSvpAddrEntry 3 }


-- SVC address table

ciscoAtmSvc OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 4 }

ciscoAtmSvcAddrTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmSvcAddrEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "Switched virtual channel link address table.
"
        ::= { ciscoAtmSvc 1 }

ciscoAtmSvcAddrEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSvcAddrEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        " An entry in the SVC address table.
"
        INDEX { ifIndex,ciscoAtmSvcAddr, ciscoAtmSvcVpi, ciscoAtmSvcVci }
        ::= { ciscoAtmSvcAddrTable 1 }

CiscoAtmSvcAddrEntry ::=
        SEQUENCE {
        ciscoAtmSvcAddr         OCTET STRING ,
        ciscoAtmSvcVpi          Integer32,
        ciscoAtmSvcVci          Integer32,
        ciscoAtmSvcDirection    Direction
    }

ciscoAtmSvcAddr OBJECT-TYPE
        SYNTAX     OCTET STRING (SIZE(20)) 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "It depends on the direction.This could be p2pCallingSide 
        address on a called side VCL, or p2pCalledSide address on a 
        calling side VCL or p2mpRoot address on a p2mp leaf side VCL 
        or p2mpLeaf address on a p2mp root side VCL.
"
        ::= { ciscoAtmSvcAddrEntry 1 }

ciscoAtmSvcVpi OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION        "This SVC's VPI value on this interface.
"
        ::= { ciscoAtmSvcAddrEntry 2 }

ciscoAtmSvcVci OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION        "This SVC's VCI value on this interface.
"
        ::= { ciscoAtmSvcAddrEntry 3 }

ciscoAtmSvcDirection OBJECT-TYPE
        SYNTAX     Direction
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION        "Indicate whether this VCL is calling side, called side, 
        root or leaf for this address.
"
        ::= { ciscoAtmSvcAddrEntry 4 }

-- Snoop VC Table for per-VC snooping
-- keeps the corresponding snooped interface,  snooped vpi, snooped vci 
-- snooping direction

ciscoAtmSnoopVc OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 5 }

ciscoAtmSnoopVcTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmSnoopVcEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "Snooping VC Table.
"
        ::= { ciscoAtmSnoopVc 1 }

ciscoAtmSnoopVcEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVcEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "An entry in the Snoop VC table. This entry models a VC snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi and atmVclVci  specifies the VPI and VCI value of the 
         snooping connection. To create or destroy a snooping connection 
         at an ATM interface, the following procedures are used:
        
         Configure VC Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI/VCI values are unavailable,
              - The selected snooping VPI/VCI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VC Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent 
         releases all associated resources.
"
        INDEX { ifIndex, atmVclVpi, atmVclVci }
        ::= { ciscoAtmSnoopVcTable 1 }

CiscoAtmSnoopVcEntry ::=
        SEQUENCE {
        ciscoAtmSnoopVcSnoopedIfIndex    InterfaceIndexOrZero,
        ciscoAtmSnoopVcSnoopedVpi        Integer32,
        ciscoAtmSnoopVcSnoopedVci        Integer32,
        ciscoAtmSnoopVcDir               SnoopDirType, 
        ciscoAtmSnoopVcState             ConnState,
        ciscoAtmSnoopVcRowStatus         RowStatus
        }

ciscoAtmSnoopVcSnoopedIfIndex OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-create
        STATUS         current
       DESCRIPTION        "This specifies the ifIndex of the snooped interface.
"
        DEFVAL { 0 }
        ::= { ciscoAtmSnoopVcEntry 1 }
 
ciscoAtmSnoopVcSnoopedVpi OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION        "This specifies the VPI value of the snooped connection endpoint.
"
        DEFVAL { 0 }
        ::= { ciscoAtmSnoopVcEntry 2 }
 
ciscoAtmSnoopVcSnoopedVci    OBJECT-TYPE
        SYNTAX         Integer32 (0..65535)
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION        "This specifies the VCI value of the snooped connection endpoint.
"
        DEFVAL { 0 }
        ::= { ciscoAtmSnoopVcEntry 3}
 
ciscoAtmSnoopVcDir    OBJECT-TYPE
        SYNTAX         SnoopDirType
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION        "This specifies the traffic direction at the snooped connection 
         endpoint.
"
        DEFVAL { receive }
        ::= { ciscoAtmSnoopVcEntry 4 }

ciscoAtmSnoopVcState OBJECT-TYPE
        SYNTAX       ConnState
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION           "The connection state of this Snooping connetion.
"
        ::= { ciscoAtmSnoopVcEntry 5 }

ciscoAtmSnoopVcRowStatus       OBJECT-TYPE
        SYNTAX       RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION        "This object is used to create a new row or delete an existing row 
         in this table. This gives the way to configure one-shot per-vc
         snooping connection
"
        DEFVAL  { active }
        ::= { ciscoAtmSnoopVcEntry 6}

-- Snoop VP Table, for per-VP snooping 
-- keeps the corresponding snooped interface, snooped vpi 
-- and snooping direction

ciscoAtmSnoopVp OBJECT IDENTIFIER ::= { ciscoAtmConnMIBObjects 6 }

ciscoAtmSnoopVpTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF CiscoAtmSnoopVpEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "Snooping VP Table.
"
        ::= { ciscoAtmSnoopVp 1 }

ciscoAtmSnoopVpEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVpEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION        "An entry in the Snoop VP table. This entry models a VP snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi specifies the VPI value of the snooping connection. To 
         create or destroy a snooping connection at an ATM interface, the 
         following procedures are used:
        
         Configure VP Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI values are unavailable,
              - The selected snooping VPI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VP Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent 
         releases all associated resources.
"
        INDEX { ifIndex, atmVplVpi }
        ::= { ciscoAtmSnoopVpTable 1 }

CiscoAtmSnoopVpEntry ::=
        SEQUENCE {
        ciscoAtmSnoopVpSnoopedIfIndex    InterfaceIndexOrZero,
        ciscoAtmSnoopVpSnoopedVpi        Integer32,
        ciscoAtmSnoopVpDir               SnoopDirType, 
        ciscoAtmSnoopVpState             ConnState,
        ciscoAtmSnoopVpRowStatus         RowStatus
        }

ciscoAtmSnoopVpSnoopedIfIndex OBJECT-TYPE
        SYNTAX         InterfaceIndexOrZero
        MAX-ACCESS     read-create
        STATUS         current
       DESCRIPTION        "This specifies the ifIndex of the snooped interface.
"
        DEFVAL { 0 }
        ::= { ciscoAtmSnoopVpEntry 1 }
 
ciscoAtmSnoopVpSnoopedVpi OBJECT-TYPE
        SYNTAX         Integer32 (0..4095)
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION        "This specifies the VPI value of the snooped connection endpoint.
"
        DEFVAL { 0 }
        ::= { ciscoAtmSnoopVpEntry 2 }
 
ciscoAtmSnoopVpDir    OBJECT-TYPE
        SYNTAX         SnoopDirType
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION        "This specifies the traffic direction at the snooped connection 
         endpoint.
"
        DEFVAL { receive }
        ::= { ciscoAtmSnoopVpEntry 3 }

ciscoAtmSnoopVpState OBJECT-TYPE
        SYNTAX       ConnState
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION           "The connection state of this Snooping connection .
"
        ::= { ciscoAtmSnoopVpEntry 4 }

ciscoAtmSnoopVpRowStatus       OBJECT-TYPE
        SYNTAX       RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION        "This object is used to create a new row or delete an existing row 
         in this table. This gives the way to configure one-shot per-vp
         snooping connection
"
        DEFVAL  { active }
        ::= { ciscoAtmSnoopVpEntry 5}


-- global config of frame discard SVC usage 

ciscoAtmSvcFrameDiscardUsesAal5Ie OBJECT-TYPE
        SYNTAX         TruthValue
        MAX-ACCESS     read-write
        STATUS         current
        DESCRIPTION        "Determines mechanism to use on interfaces
         to specify frame discard.
 
         Specifying a value of true causes the presence
         of the AAL5 IE to influence whether frame discard
         is used on an SVC. If AAL5 IE is present in a received
         SETUP, frame discard is used.
 
         Specifying a value of false results in no influence on
         presence of the frame discard by the AAL5 IE.
"
        DEFVAL { true }
        ::= { ciscoAtmSvc 2 }

-- conformance information

ciscoAtmConnMIBConformance
              OBJECT IDENTIFIER ::= { ciscoAtmConnMIB 3 }
ciscoAtmConnMIBCompliances
              OBJECT IDENTIFIER ::= { ciscoAtmConnMIBConformance 1 }
ciscoAtmConnMIBGroups
              OBJECT IDENTIFIER ::= { ciscoAtmConnMIBConformance 2 }


-- compliance statements

ciscoAtmConnMIBCompliance MODULE-COMPLIANCE
        STATUS  obsolete -- susperseded by ciscoAtmConnMIBCompliances2
        DESCRIPTION        "The compliance statement for the Cisco ATM connection 
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup }

        ::= { ciscoAtmConnMIBCompliances 1 }

ciscoAtmConnMIBCompliance2 MODULE-COMPLIANCE
        STATUS  obsolete -- susperseded by ciscoAtmConnMIBCompliances3
        DESCRIPTION        "The compliance statement for the Cisco ATM connection 
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup,
                                   ciscoAtmConnMIBGroup2
                                 }

        ::= { ciscoAtmConnMIBCompliances 2 }

ciscoAtmConnMIBCompliance3 MODULE-COMPLIANCE
        STATUS  obsolete -- susperseded by ciscoAtmConnMIBCompliances4
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup,
                                   ciscoAtmConnMIBlsFcPfqGroup 
                                 }
        ::= { ciscoAtmConnMIBCompliances 3 }

ciscoAtmConnMIBCompliance4 MODULE-COMPLIANCE
        STATUS  obsolete -- susperseded by ciscoAtmConnMIBCompliances5 
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup2,
                                   ciscoAtmConnMIBlsFcPfqGroup
                                 }
        ::= { ciscoAtmConnMIBCompliances 4 }

ciscoAtmConnMIBCompliance5 MODULE-COMPLIANCE
        STATUS  deprecated -- superseded by ciscoAtmConnMIBCompliances6 
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup2,
                                   ciscoAtmConnMIBlsFcPfqGroup,
                                   ciscoAtmConnMIBNegTraffGroup
                                 }
        ::= { ciscoAtmConnMIBCompliances 5 }

ciscoAtmConnMIBCompliance6 MODULE-COMPLIANCE
        STATUS  deprecated 
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup2,
                                   ciscoAtmConnMIBlsFcPfqGroup1,
                                   ciscoAtmConnMIBNegTraffGroup
                                 }
        ::= { ciscoAtmConnMIBCompliances 6 }

ciscoAtmConnMIBCompliance7 MODULE-COMPLIANCE
        STATUS  deprecated 
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup1,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup2,
                                   ciscoAtmConnMIBlsFcPfqGroup1,
                                   ciscoAtmConnMIBNegTraffGroup
                                 }
        ::= { ciscoAtmConnMIBCompliances 7 }

ciscoAtmConnMIBCompliance8 MODULE-COMPLIANCE
        STATUS  current 
        DESCRIPTION        "The compliance statement for the Cisco ATM connection
        management group.
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoAtmConnMIBGroup4,
                                   ciscoAtmConnMIBGroup3,
                                   ciscoAtmConnMIBlsPerVcqGroup2,
                                   ciscoAtmConnMIBlsFcPfqGroup1,
                                   ciscoAtmConnMIBNegTraffGroup
                                 }
        GROUP ciscoAtmConnNmsGroup
        DESCRIPTION           "This is an optional group
"
        ::= { ciscoAtmConnMIBCompliances 8 }

-- units of conformance

ciscoAtmConnMIBGroup  OBJECT-GROUP
        OBJECTS { 
        ciscoAtmVplCastType,
        ciscoAtmVplSpanType,
        ciscoAtmVplConfigType,
        ciscoAtmVplRxUpcMode,
        ciscoAtmVplConnState,
        ciscoAtmVplOamLoopbkTxInterval,
        ciscoAtmVplOamSegmentLoopback,
        ciscoAtmVplOamEndLoopback,       
        ciscoAtmVplOamAisEnable,      
        ciscoAtmVplOamRdiEnable,         
        ciscoAtmVplInstallTime,         
        ciscoAtmVplInCells,             
        ciscoAtmVplOutCells,            
        ciscoAtmVplCrossIfIndex,  
        ciscoAtmVplCrossVpi,            
        ciscoAtmVplNextLeafIfIndex,
        ciscoAtmVplNextLeafVpi,
        ciscoAtmVplRemoteAddr,
        ciscoAtmVplRemoteVpi,
        ciscoAtmVplLocation,
        ciscoAtmVplSlowRetryIntv,
        ciscoAtmVplNumAttempts,
        ciscoAtmVplLastReleaseCause,
        ciscoAtmVplLogicalPortDef,
        ciscoAtmVplLogicalPortIndex,
        ciscoAtmVclCastType,
        ciscoAtmVclSpanType,
        ciscoAtmVclConfigType,
        ciscoAtmVclRxUpcMode,
        ciscoAtmVclEpdEnable,
        ciscoAtmVclConnState,
        ciscoAtmVclOamLoopbkTxInterval,
        ciscoAtmVclOamSegmentLoopback,
        ciscoAtmVclOamEndLoopback,
        ciscoAtmVclOamAisEnable,
        ciscoAtmVclOamRdiEnable,
        ciscoAtmVclInstallTime,
        ciscoAtmVclInCells,
        ciscoAtmVclOutCells,
        ciscoAtmVclCrossIfIndex,
        ciscoAtmVclCrossVpi,
        ciscoAtmVclCrossVci,
        ciscoAtmVclNextLeafIfIndex,
        ciscoAtmVclNextLeafVpi,
        ciscoAtmVclNextLeafVci,
        ciscoAtmVclAalEncapFlag,
        ciscoAtmVclAalEncapProtocol,
        ciscoAtmVclAalUserVcType,
        ciscoAtmVclAtmInArpInterval,
        ciscoAtmVclRemoteAddr,
        ciscoAtmVclRemoteVpi,
        ciscoAtmVclRemoteVci,
        ciscoAtmVclLocation,
        ciscoAtmVclSlowRetryIntv,
        ciscoAtmVclNumAttempts,
        ciscoAtmVclLastReleaseCause,
        ciscoAtmSvpDirection,
        ciscoAtmSvcDirection
    }
    STATUS    deprecated
    DESCRIPTION    "
"
    ::= { ciscoAtmConnMIBGroups 1 }

ciscoAtmConnMIBGroup2  OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplUpcViolations,
        ciscoAtmVplEpdTpdCellDrops,
        ciscoAtmVplEpdTpdPacketDrops,
        ciscoAtmVplEpdTpdPacketsIn,
        ciscoAtmVplClp1Drops,
        ciscoAtmVplDefaultRxUpcTolerance,
        ciscoAtmVclUpcViolations,
        ciscoAtmVclEpdTpdCellDrops,
        ciscoAtmVclEpdTpdPacketDrops,
        ciscoAtmVclEpdTpdPacketsIn,
        ciscoAtmVclClp1Drops,
        ciscoAtmVclDefaultRxUpcTolerance,
        ciscoAtmSvcFrameDiscardUsesAal5Ie
    }
    STATUS    obsolete 
    DESCRIPTION    "
"
    ::= { ciscoAtmConnMIBGroups 2 }

ciscoAtmConnMIBGroup3  OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplDefaultRxUpcTolerance,
        ciscoAtmVclDefaultRxUpcTolerance,
        ciscoAtmVplDefaultRxUpcVbrCdvt,
        ciscoAtmVclDefaultRxUpcVbrCdvt,
        ciscoAtmSvcFrameDiscardUsesAal5Ie
    }
    STATUS    current
    DESCRIPTION    "
"
    ::= { ciscoAtmConnMIBGroups 3 }

ciscoAtmConnMIBlsPerVcqGroup  OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplLsPerVcqWrrWeight,
        ciscoAtmVplLsPerVcqTunnelIsShaped,
        ciscoAtmVplLsPerVcqXmtQueuedCells,
        ciscoAtmVplLsPerVcQThreshGrp,
        ciscoAtmVclLsPerVcqWrrWeight,
        ciscoAtmVclLsPerVcqXmtQueuedCells,
        ciscoAtmVclLsPerVcQThreshGrp,
        ciscoAtmSnoopVcSnoopedIfIndex,
        ciscoAtmSnoopVcSnoopedVpi,
        ciscoAtmSnoopVcSnoopedVci,
        ciscoAtmSnoopVcDir,
        ciscoAtmSnoopVcState,
        ciscoAtmSnoopVcRowStatus,
        ciscoAtmSnoopVpSnoopedIfIndex,
        ciscoAtmSnoopVpSnoopedVpi,
        ciscoAtmSnoopVpDir,
        ciscoAtmSnoopVpState,
        ciscoAtmSnoopVpRowStatus
    }
    STATUS    obsolete
    DESCRIPTION    "A collection of objects which are supported on platforms
     using the Lightstream per-VC queueing chipset.
"
    ::= { ciscoAtmConnMIBGroups 4 }

ciscoAtmConnMIBlsFcPfqGroup OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplUpcViolations,
        ciscoAtmVclUpcViolations,
        ciscoAtmVclEpdTpdPacketDrops,
        ciscoAtmVclEpdTpdPacketsIn,
        ciscoAtmVplInClp0Cells,
        ciscoAtmVplInClp1Cells,
        ciscoAtmVplOutClp0Cells,
        ciscoAtmVplOutClp1Cells,
        ciscoAtmVplCellDrops,
        ciscoAtmVplClp0VcqFullCellDrops,
        ciscoAtmVplVcqClpThreshCellDrops,
        ciscoAtmVclInClp0Cells,
        ciscoAtmVclInClp1Cells,
        ciscoAtmVclOutClp0Cells,
        ciscoAtmVclOutClp1Cells,
        ciscoAtmVclCellDrops,
        ciscoAtmVclClp0VcqFullCellDrops,
        ciscoAtmVclVcqClpThreshCellDrops
    }
    STATUS    deprecated -- susperseded by ciscoAtmConnMIBlsFcPfqGroup1
    DESCRIPTION    "A collection of objects which are supported on LS1010 systems
     equipped with the FC-PFQ feature card.
"
    ::= { ciscoAtmConnMIBGroups 5 }

ciscoAtmConnMIBlsPerVcqGroup2   OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplLsPerVcqWrrWeight,
        ciscoAtmVplLsPerVcqTunnelIsShaped,
        ciscoAtmVplLsPerVcqTunnelIsHierarchical,
        ciscoAtmVplLsPerVcqXmtQueuedCells,
        ciscoAtmVplLsPerVcQThreshGrp,
        ciscoAtmVclLsPerVcqWrrWeight,
        ciscoAtmVclLsPerVcqXmtQueuedCells,
        ciscoAtmVclLsPerVcQThreshGrp,
        ciscoAtmSnoopVcSnoopedIfIndex,
        ciscoAtmSnoopVcSnoopedVpi,
        ciscoAtmSnoopVcSnoopedVci,
        ciscoAtmSnoopVcDir,
        ciscoAtmSnoopVcState,
        ciscoAtmSnoopVcRowStatus,
        ciscoAtmSnoopVpSnoopedIfIndex,
        ciscoAtmSnoopVpSnoopedVpi,
        ciscoAtmSnoopVpDir,
        ciscoAtmSnoopVpState,
        ciscoAtmSnoopVpRowStatus
    }
    STATUS    current
    DESCRIPTION    "A collection of objects which are supported on platforms
     using the Lightstream per-VC queueing chipset.
"
    ::= { ciscoAtmConnMIBGroups 6 }
 
ciscoAtmConnMIBNegTraffGroup OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplRxNegTraffDescrIndex,    
        ciscoAtmVplTxNegTraffDescrIndex,    
        ciscoAtmVclRxNegTraffDescrIndex,    
        ciscoAtmVclTxNegTraffDescrIndex    
    }
    STATUS    current
    DESCRIPTION    "A collection of objects to report negotiated traffic parameters
     on a Cisco ATM switch.
"
    ::= { ciscoAtmConnMIBGroups 7 }

ciscoAtmConnMIBlsFcPfqGroup1 OBJECT-GROUP
    OBJECTS {
        ciscoAtmVplUpcViolations,
        ciscoAtmVclUpcViolations,
        ciscoAtmVclEpdTpdPacketDrops,
        ciscoAtmVclEpdTpdPacketsIn,
        ciscoAtmVplInClp0Cells,
        ciscoAtmVplInClp1Cells,
        ciscoAtmVplOutClp0Cells,
        ciscoAtmVplOutClp1Cells,
        ciscoAtmVplCellDrops,
        ciscoAtmVplClp0VcqFullCellDrops,
        ciscoAtmVplVcqClpThreshCellDrops,
        ciscoAtmVplSwFabOutCells,
        ciscoAtmVplSwFabOutClp0Cells,
        ciscoAtmVplSwFabOutClp1Cells,
        ciscoAtmVclInClp0Cells,
        ciscoAtmVclInClp1Cells,
        ciscoAtmVclOutClp0Cells,
        ciscoAtmVclOutClp1Cells,
        ciscoAtmVclCellDrops,
        ciscoAtmVclClp0VcqFullCellDrops,
        ciscoAtmVclVcqClpThreshCellDrops,
        ciscoAtmVclSwFabOutCells,
        ciscoAtmVclSwFabOutClp0Cells,
        ciscoAtmVclSwFabOutClp1Cells 
    }
    STATUS    current
    DESCRIPTION    "A collection of objects which are supported on LS1010 systems
     equipped with the FC-PFQ feature card.
"
    ::= { ciscoAtmConnMIBGroups 8 }


ciscoAtmConnMIBGroup1  OBJECT-GROUP
        OBJECTS { 
        ciscoAtmVplCastType,
        ciscoAtmVplSpanType,
        ciscoAtmVplConfigType,
        ciscoAtmVplRxUpcMode,
        ciscoAtmVplConnState,
        ciscoAtmVplOamLoopbkTxInterval,
        ciscoAtmVplOamSegmentLoopback,
        ciscoAtmVplOamEndLoopback,       
        ciscoAtmVplOamAisEnable,      
        ciscoAtmVplOamRdiEnable,         
        ciscoAtmVplInstallTime,         
        ciscoAtmVplInCells,             
        ciscoAtmVplOutCells,            
        ciscoAtmVplCrossIfIndex,  
        ciscoAtmVplCrossVpi,            
        ciscoAtmVplNextLeafIfIndex,
        ciscoAtmVplNextLeafVpi,
        ciscoAtmVplRemoteAddr,
        ciscoAtmVplRemoteVpi,
        ciscoAtmVplLocation,
        ciscoAtmVplSlowRetryIntv,
        ciscoAtmVplNumAttempts,
        ciscoAtmVplLastReleaseCause,
        ciscoAtmVplLogicalPortDef,
        ciscoAtmVplLogicalPortIndex,
        ciscoAtmVplConnName,
        ciscoAtmVclCastType,
        ciscoAtmVclSpanType,
        ciscoAtmVclConfigType,
        ciscoAtmVclRxUpcMode,
        ciscoAtmVclEpdEnable,
        ciscoAtmVclConnState,
        ciscoAtmVclOamLoopbkTxInterval,
        ciscoAtmVclOamSegmentLoopback,
        ciscoAtmVclOamEndLoopback,
        ciscoAtmVclOamAisEnable,
        ciscoAtmVclOamRdiEnable,
        ciscoAtmVclInstallTime,
        ciscoAtmVclInCells,
        ciscoAtmVclOutCells,
        ciscoAtmVclCrossIfIndex,
        ciscoAtmVclCrossVpi,
        ciscoAtmVclCrossVci,
        ciscoAtmVclNextLeafIfIndex,
        ciscoAtmVclNextLeafVpi,
        ciscoAtmVclNextLeafVci,
        ciscoAtmVclAalEncapFlag,
        ciscoAtmVclAalEncapProtocol,
        ciscoAtmVclAalUserVcType,
        ciscoAtmVclAtmInArpInterval,
        ciscoAtmVclRemoteAddr,
        ciscoAtmVclRemoteVpi,
        ciscoAtmVclRemoteVci,
        ciscoAtmVclLocation,
        ciscoAtmVclSlowRetryIntv,
        ciscoAtmVclNumAttempts,
        ciscoAtmVclLastReleaseCause,
        ciscoAtmVclConnName,
        ciscoAtmSvpDirection,
        ciscoAtmSvcDirection
    }
    STATUS    deprecated
    DESCRIPTION    "
"
    ::= { ciscoAtmConnMIBGroups 9 }


ciscoAtmConnMIBGroup4  OBJECT-GROUP
        OBJECTS { 
        ciscoAtmVplCastType,
        ciscoAtmVplSpanType,
        ciscoAtmVplConfigType,
        ciscoAtmVplRxUpcMode,
        ciscoAtmVplConnState,
        ciscoAtmVplOamLoopbkTxInterval,
        ciscoAtmVplOamSegmentLoopback,
        ciscoAtmVplOamEndLoopback,       
        ciscoAtmVplOamAisEnable,      
        ciscoAtmVplOamRdiEnable,         
        ciscoAtmVplInstallTime,         
        ciscoAtmVplInCells,             
        ciscoAtmVplOutCells,            
        ciscoAtmVplCrossIfIndex,  
        ciscoAtmVplCrossVpi,            
        ciscoAtmVplNextLeafIfIndex,
        ciscoAtmVplNextLeafVpi,
        ciscoAtmVplRemoteAddr,
        ciscoAtmVplRemoteVpi,
        ciscoAtmVplLocation,
        ciscoAtmVplSlowRetryIntv,
        ciscoAtmVplNumAttempts,
        ciscoAtmVplLastReleaseCause,
        ciscoAtmVplLogicalPortDef,
        ciscoAtmVplLogicalPortIndex,
        ciscoAtmVclCastType,
        ciscoAtmVclSpanType,
        ciscoAtmVclConfigType,
        ciscoAtmVclRxUpcMode,
        ciscoAtmVclEpdEnable,
        ciscoAtmVclConnState,
        ciscoAtmVclOamLoopbkTxInterval,
        ciscoAtmVclOamSegmentLoopback,
        ciscoAtmVclOamEndLoopback,
        ciscoAtmVclOamAisEnable,
        ciscoAtmVclOamRdiEnable,
        ciscoAtmVclInstallTime,
        ciscoAtmVclInCells,
        ciscoAtmVclOutCells,
        ciscoAtmVclCrossIfIndex,
        ciscoAtmVclCrossVpi,
        ciscoAtmVclCrossVci,
        ciscoAtmVclNextLeafIfIndex,
        ciscoAtmVclNextLeafVpi,
        ciscoAtmVclNextLeafVci,
        ciscoAtmVclAalEncapFlag,
        ciscoAtmVclAalEncapProtocol,
        ciscoAtmVclAalUserVcType,
        ciscoAtmVclAtmInArpInterval,
        ciscoAtmVclRemoteAddr,
        ciscoAtmVclRemoteVpi,
        ciscoAtmVclRemoteVci,
        ciscoAtmVclLocation,
        ciscoAtmVclSlowRetryIntv,
        ciscoAtmVclNumAttempts,
        ciscoAtmVclLastReleaseCause,
        ciscoAtmSvpDirection,
        ciscoAtmSvcDirection
    }
    STATUS    current
    DESCRIPTION    "
"
    ::= { ciscoAtmConnMIBGroups 10 }

ciscoAtmConnNmsGroup  OBJECT-GROUP
     OBJECTS { 
        ciscoAtmVplConnName,   
        ciscoAtmVplConnType,
        ciscoAtmVclConnName,   
        ciscoAtmVclConnType
    } 
    STATUS    current
    DESCRIPTION    "A group of objects that provides additional information
     for a management system
"
    ::= { ciscoAtmConnMIBGroups 11 }
END





                
                
            
			
        
   
Help  |  Feedback