Guest

Tools & Resources

SNMP Object Navigator


CISCO-CALL-TRACKER-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-CALL-TRACKER-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    4. SNMPv2-MIB Download  |  Download  |  View Dependencies
    5. IANAifType-MIB Download  |  Download  |  View Dependencies
    6. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    7. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    9. IF-MIB Download  |  Download  |  View Dependencies
    10. CISCO-SMI Download  |  Download  |  View Dependencies
    11. DIAL-CONTROL-MIB Download  |  Download  |  View Dependencies
    12. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    13. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    14. CISCO-CALL-TRACKER-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-CALL-TRACKER-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


 -- *****************************************************************
-- CISCO-CALL-TRACKER-MIB.my: Call Progress and Status Tracking MIB
--
-- March 2000, Ed Richardson
--
-- Copyright (c) 2000, 2004 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--


CISCO-CALL-TRACKER-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        NOTIFICATION-TYPE,
        OBJECT-TYPE,
        IpAddress,
        Gauge32,
        Integer32,
        Unsigned32
                FROM SNMPv2-SMI
        MODULE-COMPLIANCE,
        OBJECT-GROUP,
        NOTIFICATION-GROUP
                FROM SNMPv2-CONF
        DisplayString,
        TimeStamp,
        TruthValue,
        TEXTUAL-CONVENTION
                FROM SNMPv2-TC
        ciscoMgmt
                FROM CISCO-SMI
        AbsoluteCounter32
                FROM DIAL-CONTROL-MIB;
 
 
ciscoCallTrackerMIB MODULE-IDENTITY
        LAST-UPDATED    "200504120000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W. Tasman Drive
                        San Jose, CA  95134
                        USA
 
                Tel: +1 800 553-NETS
 
                E-mail: cs-dial@cisco.com"
        DESCRIPTION                "This MIB module provides information for tracking the
                 progress and status of a data call from the hardware
                 layer through the application or service layer.

                 A data call is a call setup via a signaling
                 protocol (e.g., ISDN D Channel signaling) on the
                 Public Switching Telephony Network to a
                 Network Access Server in order to transfer data,
                 either as a byte stream (e.g., terminal emulation)
                 or in a packet format (e.g., PPP packets) from a
                 data terminal (e.g., Personal Computer) to a
                 data network (e.g., Internet).
                
"
        REVISION        "200504120000Z"
        DESCRIPTION                "[1] CctCallCategory - added syncData
                 [2] CctCallCategory - added lapb-ta
                 [3] Added new textual convention CctCallSigType
                 [4] Added cctActiveCallSignalingType to cctActiveTable
                 [5] Added cctHistoryCallSignalingType to
                     cctHistoryTable
                
"
        REVISION        "200402020000Z"
        DESCRIPTION                "Included mgcpData in CctCallCategory.
"
        REVISION        "200002100000Z"
        DESCRIPTION                "Initial version of this MIB.
"
        ::= { ciscoMgmt 163 }


--
-- Textual Conventions
--


--
--  Call Identifier textual convention
--


CctCallId ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION        "Represents a Call Identifier.
         The call identifier is a monotonically assigned, positive
         integer which uniquely identifies the call within the
         system.
        
"
        SYNTAX      Unsigned32 (1..4294967295)


--
--  Call Service Type textual convention
--
CctServiceType ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION            "Represents possible service types.
             none     - No service associated with call.
             other    - Service active, but none of the following.
             slip     - Serial Line IP
             ppp      - PPP
             mp       - Multilink PPP (RFC 1990)
             tcpClear - Byte stream over TCP
             telnet   - TELNET
             exec     - terminal server
             l2f      - Virtual Private Data Network service (VPDN)
                        using Layer 2 Forwarding protocol
             l2tp     - Virtual Private Data Network service (VPDN)
                        using Layer 2 Tunneling Protocol
            
"
        SYNTAX      INTEGER {
            none        (1),
            other       (2),
            slip        (3),
            ppp         (4),
            mp          (5),
            tcpClear    (6),
            telnet      (7),
            exec        (8),
            l2f         (9),
            l2tp        (10)
        }


--
--  Call Category textual convention
--
CctCallCategory ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION            "Represents possible call categories or types.
             none        - No call category associated with call
             other       - None of the following
             modem       - Modem call
             isdn-sync   - ISDN sync digital call
                           Now mapped to syncData
             v110        - V110 Call
             v120        - V120 Call
             cas-digital - Channel Associated Signaling
                           (CAS) 56k data call
             mgcpData    - MGCP data call
                           Now mapped to syncData
             syncData    - Sync digital data call for any 
                           call control
             lapb-ta     - LAPB or LAPB-TA call
            
"
        SYNTAX      INTEGER {
            none         (1),
            other        (2),
            modem        (3),
            isdnSync     (4),
            v110         (5),
            v120         (6),
            casDigital   (7),
            mgcpData     (8),
            syncData     (9),
            lapb-ta      (10)
        }

--
--  Call Signaling Type textual convention
--
CctCallSigType ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION            "Represents supported signaling types for a call.

             Unknown    - Signaling origin of call type unknown.
             External   - Signaling origin of call type by external 
                          agent e.g. MGCP, H.248
             Q931       - Signaling origin of call type by Q.931/ISDN
             Autodetect - Signaling of call type by automatic detection 
            
"
        SYNTAX      INTEGER {
            unknown      (1),
            external     (2),
            q931         (3),
            autoDetect   (4)
        }


-- Call Tracker MIB objects definitions

cctMIBObjects OBJECT IDENTIFIER ::= { ciscoCallTrackerMIB 1 }


-- The Call Tracker MIB consists of the following groups
-- [1] Call Tracker General Group (cctGeneral)
-- [2] Call Tracker Active Group  (cctActive)
-- [3] Call Tracker History Group (cctHistory)
-- [4] Call Tracker Notification Configuration Group
--                  (cctNotificationConfig)

cctGeneral             OBJECT IDENTIFIER ::= { cctMIBObjects 1 }
cctActive              OBJECT IDENTIFIER ::= { cctMIBObjects 2 }
cctHistory             OBJECT IDENTIFIER ::= { cctMIBObjects 3 }
cctNotificationConfig  OBJECT IDENTIFIER ::= { cctMIBObjects 4 }



-- *****************************************************************
-- Call Tracker General Group
-- *****************************************************************


cctCallIdPrefix OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "This object may be used in conjunction with objects of
             type CctCallId to provide call references which are
             unique across system re-initializations.

             This value is generated at system re-initialization.
             It is a 32-bit random number, with very low likely-hood
             of repeating within the lifetime of the system.
            
"
        ::= { cctGeneral 1 }



-- *****************************************************************
-- Call Tracker Active Group
-- *****************************************************************
--
--


-- Active Table statistics

cctActiveTableNumberEntries OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The number of entries currently in the
             cctActiveTable.
            
"
        ::= { cctActive 1 }

cctActiveTableHighWaterMark OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Maximum number of entries present in cctActiveTable
             since last system re-initialization.

             This corresponds to the maximum value reported by
             cctActiveTableNumberEntries.
            
"
        ::= { cctActive 2 }

--
-- Call Active Table
--


cctActiveTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CctActiveEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION            "This table contains entries for active calls in the 
             system. All such calls either originate or terminate
             at this system.

             The table is indexed by call ID assigned to the call.
            
"
        ::= { cctActive 3 }


cctActiveEntry OBJECT-TYPE
        SYNTAX      CctActiveEntry
        MAX-ACCESS  not-accessible 
        STATUS      current
        DESCRIPTION            "The information regarding a single call.

             Entries are created when a setup request is first
             received by the system.

             Entries are removed when a call is terminated or
             rejected. A corresponding entry is created in the
             cctHistoryTable.
            
"
        INDEX       { cctActiveCallId }
        ::= { cctActiveTable 1 }


CctActiveEntry ::=
        SEQUENCE {
            cctActiveCallId                  CctCallId,
            cctActiveSetupTime               TimeStamp,
            cctActiveOrigin                  INTEGER,
            cctActiveConnectionTime          TimeStamp,
            cctActivePhysicalLayerReadyTime  TimeStamp,
            cctActiveServiceUpTime           TimeStamp,
            cctActiveServiceType             CctServiceType,
            cctActiveUserValidationTime      TimeStamp,
            cctActiveUserId                  DisplayString,
            cctActiveUserIpAddr              IpAddress,
            cctActiveUserSubnetMask          IpAddress,
            cctActiveAccountingSessionId     DisplayString,
            cctActiveCallCategory            CctCallCategory,
            cctActiveInitialRxRate           Unsigned32,
            cctActiveInitialTxRate           Unsigned32,
            cctActiveResourceSlot            Integer32,
            cctActiveResourcePort            Integer32,
            cctActiveEntrySlot               Integer32,
            cctActiveEntryPort               Integer32,
            cctActiveEntryDs1                Integer32,
            cctActiveEntryChannel            Integer32,
            cctActiveCalledPartyId           DisplayString,
            cctActiveCallingPartyId          DisplayString,
            cctActiveMpBundleId              Unsigned32,
            cctActiveChargedUnits            AbsoluteCounter32,
            cctActiveReceiveBytes            AbsoluteCounter32,
            cctActiveTransmitBytes           AbsoluteCounter32,
            cctActiveCallSignalingType       CctCallSigType
        }


cctActiveCallId OBJECT-TYPE
        SYNTAX      CctCallId
        MAX-ACCESS  not-accessible 
        STATUS      current
        DESCRIPTION            "Represents a Call Identifier.
             The call identifier is a monotonically increasing
             unsigned integer which uniquely identifies the call
             within the system.

             The Call ID is represented as an unsigned 32-bit
             integer. After 4,294,967,295 calls, the ID will wrap
             and the 4,294,967,296th call will receive the next
             smallest available id starting from 1.

             Zero is not a valid value.
            
"
        ::= { cctActiveEntry 1 }


cctActiveSetupTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the call is first made known to
             the system.
            
"
        ::= { cctActiveEntry 2 }


cctActiveOrigin  OBJECT-TYPE
        SYNTAX      INTEGER {
           originate(1),
           answer(2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "This object indicates how the call was created.

                originate(1) - The call was initiated locally with
                               the system sending the setup request.
                               Dialout

                answer(2)    - The call was initiated remotely and
                               the system received the setup request.
                               Dialin
            
"
        ::= { cctActiveEntry 3 }


cctActiveConnectionTime  OBJECT-TYPE
        SYNTAX      TimeStamp 
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the system connected the call.
            
"
        ::= { cctActiveEntry 4 }



cctActivePhysicalLayerReadyTime  OBJECT-TYPE
        SYNTAX      TimeStamp 
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the physical layer for the call
             achieved a steady state and the call is ready for higher
             protocol layers to begin.

             In the case of modem calls, the physical layer for the
             call achieves a steady state when the data rates,
             modulations, and error correcting protocols have been
             negotiated between the originating and answering modems.

             This is primarily intended for calls which connect to a
             processing resource identified by cctActiveResourceSlot
             and cctActiveResourcePort.
             It also applies to digital calls using adaptive rate
             technologies such as V.110 and V.120.
            
"
        ::= { cctActiveEntry 5 }


cctActiveServiceUpTime  OBJECT-TYPE
        SYNTAX      TimeStamp 
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the call service type identified
             in cctActiveServiceType was established.
            
"
        ::= { cctActiveEntry 6 }


cctActiveServiceType  OBJECT-TYPE
        SYNTAX      CctServiceType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Service associated with the call.

             This is the highest level of service known to the system
             for the call. The service represents the encapsulation
             protocol layer active for the call.

             In the case of multiple services on a given call, the last
             service activated will be reported.
            
"
        ::= { cctActiveEntry 7 }


cctActiveUserValidationTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the user identification
             associated with this call was validated.

             See cctActiveUserId for description of user
             identification.
            
"
        ::= { cctActiveEntry 8 }


cctActiveUserId OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The User login ID or zero length string if unavailable.
            
"
        ::= { cctActiveEntry 9 }


cctActiveUserIpAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The IP address assigned to the cctActiveUserId for
             this call or 0.0.0.0 if not applicable or unavailable.
            
"
        ::= { cctActiveEntry 10 }


cctActiveUserSubnetMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The IP subnet mask assigned to the cctActiveUserId for
             this call or 0.0.0.0 if not applicable or unavailable.
            
"
        ::= { cctActiveEntry 11 }


cctActiveAccountingSessionId OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Accounting session identification assigned to this call
             by AAA.

             The session ID is sent by AAA to RADIUS as the
             Acct-Session-Id attribute or TACACS+ as the task_id.
 
             If no accounting session ID is assigned, the value is a 
             null string.
            
"
        REFERENCE
            "RFC 2139 RADIUS Accounting
             The TACACS+ Protocol Version 1.78, Internet Draft
            "
        ::= { cctActiveEntry 12 }


cctActiveCallCategory OBJECT-TYPE
        SYNTAX     CctCallCategory
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The call category or type
            
"
        ::= { cctActiveEntry 13 }
        

cctActiveInitialRxRate OBJECT-TYPE
        SYNTAX     Unsigned32
        UNITS      "bits per second"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Initial receive data rate for this call.
             If call is a synchronous digital call such as ISDN sync,
             this value is the data rate of the B-channel.

             If call is asynchronous, even if using a synchronous
             transmission medium such as ISDN, the value is
             determined by the resource providing the asynchronous
             processing. For modem calls, this value corresponds to
             the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
             immediately after the modem has completed initial
             negotiations.

             This value does not change, even if the data rate varies
             during the call.

             This value will be zero until an initial data rate has
             been determined.
            
"
        ::= { cctActiveEntry 14 }


cctActiveInitialTxRate OBJECT-TYPE
        SYNTAX     Unsigned32
        UNITS      "bits per second"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Initial transmit data rate for this call.
             If call is a synchronous digital call such as ISDN sync,
             this value is the data rate of the B-channel.

             If call is asynchronous, even if using a synchronous
             transmission medium such as ISDN, the value is
             determined by the resource providing the asynchronous
             processing. For modem calls, this value corresponds to
             the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
             immediately after the modem has completed initial
             negotiations.

             This value does not change, even if the data rate varies
             during the call.

             This value will be zero until an initial data rate has
             been determined.
            
"
        ::= { cctActiveEntry 15 }


cctActiveResourceSlot OBJECT-TYPE
        SYNTAX     Integer32 (-1..214783647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Identification of the processing resource allocated to
             the call.

             In the case of a call requiring a modem resource, this
             is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.

             This value along with cctActiveResourcePort uniquely
             identifies a resource port.

             Value is -1 if call does not utilize such a resource.
            
"
        ::= { cctActiveEntry 16 }
 
 
cctActiveResourcePort OBJECT-TYPE
        SYNTAX     Integer32 (-1..214783647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Identification of the processing resource allocated to
             the call.

             In the case of a call requiring a modem resource, this
             is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.

             This value along with cctActiveResourceSlot uniquely
             identifies a resource port.

             Value is -1 if call does not utilize such a resource.
            
"
        ::= { cctActiveEntry 17 }
 

cctActiveEntrySlot OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The device slot containing the port on which the call
             exists.
            
"
        ::= { cctActiveEntry 18 }


cctActiveEntryPort OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The physical port within the device slot on which the
             call exists.
            
"
        ::= { cctActiveEntry 19 }


cctActiveEntryDs1 OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The DS1 link containing the call. This may be a DS1
             contained within a larger grouping of multiple DS1s
             within a single physical port.

             If the physical port is of type DS1, this value is
             identical to cctActiveEntryPort.

             If the DS1 is a logical subinterface within the
             physical port, this value is the number of the DS1
             within this slot.

             Examples:
               8 port DS1 card - cctActiveEntryPort and
                                 cctActiveEntryDs1 will have
                                 identical values.
               3 port T3 card  - cctActiveEntryPort represents
                                 T3 ports.
                                 cctActiveEntryEntryDs1 represents
                                 logical T1 interfaces.
                                 Each T3 contains 28 T1 interfaces.
                                 The T1 interfaces are numbered
                                 sequentially across the entire
                                 T3 card.
            
"   

        ::= { cctActiveEntry 20 }


cctActiveEntryChannel OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The channel or timeslot within the cctActiveEntryDs1
             allocated to the call.
            
"
        ::= { cctActiveEntry 21 }


cctActiveCalledPartyId OBJECT-TYPE
        SYNTAX     DisplayString(SIZE(0..64))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The called telephone number for this call.
             For calls answered by the system, this corresponds to
             the Dialed Number Identification (DNIS).

             For calls originated by the system, this is the
             destination number.

             If not available this is a zero-length string.
            
"
        ::= { cctActiveEntry 22 }


cctActiveCallingPartyId OBJECT-TYPE
        SYNTAX     DisplayString(SIZE(0..64))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The calling telephone number for this call.
             For calls answered by the system, this corresponds to
             the calling identification (CLID).

             For calls originated by the system, this is the
             number associated with the device.
             For the interworking call, this object contains the
             translated calling party number if there is a
             translation rule is associated with dial plan for making
             this outgoing call.

             If not available this is a zero-length string.
            
"
        ::= { cctActiveEntry 23 }


cctActiveMpBundleId OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Multilink PPP bundle identification for call if
             cctActiveServiceType has the value 'mp'.

             If the value of cctActiveServiceType for this call is
             not 'mp', then the value of this object is not
             meaningful.
            
"
        ::= { cctActiveEntry 24 }


cctActiveChargedUnits OBJECT-TYPE
        SYNTAX     AbsoluteCounter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of charged units for this connection.
             For incoming calls or if charging information is
             not supplied by the switch, the value of this object
             will be zero.
            
"
        REFERENCE
            "AOC-D defined in ETSI Standard: ETS 300 179
            "
        ::= { cctActiveEntry 25 }


cctActiveReceiveBytes OBJECT-TYPE
        SYNTAX     AbsoluteCounter32
        UNITS      "bytes"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of bytes received on the call.  All the
             'raw' bytes are counted including any protocol headers
             which may or may not be present depending on the value
             of cctActiveServiceType.
            
"
        ::= { cctActiveEntry 26 }


cctActiveTransmitBytes OBJECT-TYPE
        SYNTAX     AbsoluteCounter32
        UNITS      "bytes"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of bytes transmitted on the call.  All the
             'raw' bytes are counted including any protocol headers
             which may or may not be present depending on the value
             of cctActiveServiceType.
            
"
        ::= { cctActiveEntry 27 }


cctActiveCallSignalingType OBJECT-TYPE
        SYNTAX     CctCallSigType
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Signaling type used to setup the call.
            
"
        ::= { cctActiveEntry 28 }



-- *****************************************************************
-- Call Tracker History Group
-- *****************************************************************

-- When a call is terminated or rejected without answering, it
-- is moved from the active table to the history table.


cctHistoryTableEntriesLimit OBJECT-TYPE
        SYNTAX      Unsigned32 (0..2147483647)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION            "The upper limit on the number of entries that the
             cctHistoryTable may contain.

             A value of zero will prevent any history from being
             retained.

             This value may not exceed the system specific limit
             provided in cctHistoryTableMaxEntries.
            
"
        ::= { cctHistory 1 }

cctHistoryTableMaxEntries OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The maximum allowed table length supported by this
             system. The value of cctHistoryTableEntriesLimit may
             not exceed this value.
            
"
        ::= { cctHistory 2 }


cctHistoryTableRetainTimer OBJECT-TYPE
        SYNTAX      Unsigned32 (0..2147483647)
        UNITS       "minutes"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION            "The maximum amount of time that an entry will be
             maintained within the cctHistoryTable before being
             deleted.

             A value of zero will prevent any history from being
             retained.
            
"
        ::= { cctHistory 3 }


-- The next two objects provide statistics to aid in
-- tuning the size of the cctHistoryTable.

cctHistoryTableNumberEntries OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Count of the number of entries currently in the
             cctHistoryTable.
            
"
        ::= { cctHistory 4 }


cctHistoryTableHighWaterMark OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Maximum number of entries present in cctHistoryTable
             since last system re-initialization or the value
             of cctHistoryTableEntriesLimit has been changed.

             This corresponds to the maximum value reported by
             cctHistoryTableNumberEntries.

             Changing the value of cctHistoryTableEntriesLimit resets
             this value to zero.
            
"
        ::= { cctHistory 5 }


cctHistoryTableNewestIndex OBJECT-TYPE
        SYNTAX      Unsigned32 (0..4294967295)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "This object provides the index value of the most
             recent entry currently in the cctHistoryTable.

             A value of zero indicates there has never been an
             entry in the table or all entries have expired.
            
"
        ::= { cctHistory 6 }


--
-- Call Tracker History Table
-- 

cctHistoryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CctHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION            "This table provides information on terminated calls.
            
"
        ::= { cctHistory 7 }

cctHistoryEntry OBJECT-TYPE
        SYNTAX      CctHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION            "The information regarding a single terminated call.

             An entry of this table is created when the system
             initiates, detects, or is notified of a call
             termination. Resources allocated to the call may
             still be in use by the call when the entry is created.

             An entry is deleted when it has existed in this table
             longer than cctHistoryTableRetainTimer minutes.

             An entry is also removed if the table is full and a new
             entry needs to be created to accommodate a terminated
             call. The oldest entry in the table will be deleted.
            
"
        INDEX       { cctHistoryIndex }
        ::= { cctHistoryTable 1 }


CctHistoryEntry ::=
        SEQUENCE {
            cctHistoryIndex                     Unsigned32,
            cctHistoryCallId                    CctCallId,
            cctHistorySetupTime                 TimeStamp,
            cctHistoryOrigin                    INTEGER,
            cctHistoryConnectionTime            TimeStamp,
            cctHistoryPhysicalLayerReadyTime    TimeStamp,
            cctHistoryServiceUpTime             TimeStamp,
            cctHistoryServiceType               CctServiceType,
            cctHistoryUserValidationTime        TimeStamp,
            cctHistoryUserId                    DisplayString,
            cctHistoryUserIpAddr                IpAddress,
            cctHistoryUserSubnetMask            IpAddress,
            cctHistoryAccountingSessionId       DisplayString,
            cctHistoryCallCategory              CctCallCategory,
            cctHistoryInitialRxRate             Unsigned32,
            cctHistoryInitialTxRate             Unsigned32,
            cctHistoryResourceSlot              Integer32,
            cctHistoryResourcePort              Integer32,
            cctHistoryEntrySlot                 Integer32,
            cctHistoryEntryPort                 Integer32,
            cctHistoryEntryDs1                  Integer32,
            cctHistoryEntryChannel              Integer32,
            cctHistoryCalledPartyId             DisplayString,
            cctHistoryCallingPartyId            DisplayString,
            cctHistoryMpBundleId                Unsigned32,
            cctHistoryChargedUnits              Gauge32,
            cctHistoryReceiveBytes              Gauge32,
            cctHistoryTransmitBytes             Gauge32,
            cctHistoryDisconnectTime            TimeStamp,
            cctHistoryDisconnectReasonText      DisplayString,
            cctHistoryCallSignalingType         CctCallSigType
        }

cctHistoryIndex OBJECT-TYPE
        SYNTAX      Unsigned32 (1..4294967295)
        MAX-ACCESS  not-accessible 
        STATUS      current
        DESCRIPTION            "A monotonically increasing integer for the sole purpose
             of indexing terminated calls.  When it reaches the
             maximum value the agent wraps the value back to 1 and
             will flush existing entries.
"
        ::= { cctHistoryEntry 1 }


cctHistoryCallId OBJECT-TYPE
        SYNTAX      CctCallId
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The call identifier for the call.
             This is the same value assigned to the call in
             cctActiveCallId when it was in the cctActiveTable.

             It is possible for two cctHistoryEntry entries to have
             the same cctHistoryCallId if one very long running call
             terminates after the cctActiveCallId has wrapped around
             and is reassigned to a new short lived call.
            
"
        ::= { cctHistoryEntry 2 }


cctHistorySetupTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the call was first made known to
             the system.
            
"
        ::= { cctHistoryEntry 3 }


cctHistoryOrigin  OBJECT-TYPE
        SYNTAX      INTEGER {
           originate(1),
           answer(2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "This object indicates how the call was created.

                originate(1) - The call was initiated locally with
                               the system sending the setup request.
                               Dialout

                answer(2)    - The call was initiated remotely and
                               the system received the setup request.
                               Dialin
            
"
        ::= { cctHistoryEntry 4 }


cctHistoryConnectionTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the system connected the call.
            
"
        ::= { cctHistoryEntry 5 }


cctHistoryPhysicalLayerReadyTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the physical layer for the call
             achieved a steady state and the call is ready for higher
             protocol layers to begin.

             In the case of modem calls, the physical layer for the
             call achieves a steady state when the data rates,
             modulations, and error correcting protocols have been
             negotiated between the originating and answering modems.

             This is primarily intended for calls which connect to a
             processing resource identified by cctHistoryResourceSlot 
             and cctHistoryResourcePort.
             It also applies to digital calls using adaptive rate
             technologies such as V.110 and V.120.
            
"
        ::= { cctHistoryEntry 6 }


cctHistoryServiceUpTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the call service type identified
             in cctHistoryServiceType was established.
            
"
        ::= { cctHistoryEntry 7 }


cctHistoryServiceType  OBJECT-TYPE
        SYNTAX      CctServiceType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Service associated with the call.

             This is the highest level of service known to the system
             for the call. The service represents the encapsulation
             protocol layer active for the call.

             In the case of multiple services on a given call, the last
             service activated will be reported.
            
"
        ::= { cctHistoryEntry 8 }


cctHistoryUserValidationTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when the user identification
             associated with this call was validated.

             See cctHistoryUserId for description of user
             identification.
            
"
        ::= { cctHistoryEntry 9 }


cctHistoryUserId OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The User login ID or zero length string if unavailable.

             If this contains a non-zero length string, and
             cctHistoryUserValidationTime is zero, then the user
             failed validation.
            
"
        ::= { cctHistoryEntry 10 }


cctHistoryUserIpAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The IP address assigned to the cctHistoryUserId for
             this call or 0.0.0.0 if not applicable or unavailable.
            
"
        ::= { cctHistoryEntry 11 }


cctHistoryUserSubnetMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The IP subnet mask assigned to the cctHistoryUserId for
             this call or 0.0.0.0 if not applicable or unavailable.
            
"
        ::= { cctHistoryEntry 12 }


cctHistoryAccountingSessionId OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Accounting session identification assigned to this call
             by AAA.

             The session ID is sent by AAA to RADIUS as the
             Acct-Session-Id attribute or TACACS+ as the task_id.

             If no accounting session ID is assigned, the value is a
             null string.
            
"
        REFERENCE
            "RFC 2139 RADIUS Accounting
             The TACACS+ Protocol Version 1.78, Internet Draft
            "
        ::= { cctHistoryEntry 13 }
        

cctHistoryCallCategory OBJECT-TYPE
        SYNTAX     CctCallCategory
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The call category or type
            
"
        ::= { cctHistoryEntry 14 }
        

cctHistoryInitialRxRate OBJECT-TYPE
        SYNTAX     Unsigned32
        UNITS      "bits per second"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Initial receive data rate for this call.
             If call is a synchronous digital call such as ISDN sync,
             this value is the data rate of the B-channel.

             If call is asynchronous, even if using a synchronous
             transmission medium such as ISDN, the value is
             determined by the resource providing the asynchronous
             processing. For modem calls, this value corresponds to
             the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
             immediately after the modem has completed initial
             negotiations.

             This value does not change, even if the data rate varies
             during the call.

             This value will be zero if the call terminated prior to
             an initial data rate determination.
            
"
        ::= { cctHistoryEntry 15 }


cctHistoryInitialTxRate OBJECT-TYPE
        SYNTAX     Unsigned32
       UNITS       "bits per second"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Initial transmit data rate for this call.
             If call is a synchronous digital call such as ISDN sync,
             this value is the data rate of the B-channel.

             If call is asynchronous, even if using a synchronous
             transmission medium such as ISDN, the value is
             determined by the resource providing the asynchronous
             processing. For modem calls, this value corresponds to
             the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
             immediately after the modem has completed initial
             negotiations.

             This value does not change, even if the data rate varies
             during the call.

             This value will be zero if the call terminated prior to
             an initial data rate determination.
            
"
        ::= { cctHistoryEntry 16 }


cctHistoryResourceSlot OBJECT-TYPE
        SYNTAX     Integer32 (-1..214783647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Identification of processing resource allocated to call.

             In the case of a call requiring a modem resource, this is
             the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.

             This value along with cctHistoryResourcePort uniquely
             identifies a resource port.

             Value is -1 if call does not utilize such a resource.
            
"
        ::= { cctHistoryEntry 17 }
 
 
cctHistoryResourcePort OBJECT-TYPE
        SYNTAX     Integer32 (-1..214783647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Identification of processing resource allocated to call.

             In the case of a call requiring a modem resource, this is
             the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.

             This value along with cctHistoryResourceSlot uniquely
             identifies a resource port.

             Value is -1 if call does not utilize such a resource.
            
"
        ::= { cctHistoryEntry 18 }


cctHistoryEntrySlot OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The device slot containing the port on which the call
             existed.
            
"
        ::= { cctHistoryEntry 19 }


cctHistoryEntryPort OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The physical port within the device slot on which the
             call existed.
            
"
        ::= { cctHistoryEntry 20 }


cctHistoryEntryDs1 OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The DS1 link containing the call. This may be a DS1
             contained within a larger grouping of multiple DS1s
             within a single physical port.

             If the physical port is of type DS1, this value is
             identical to cctActiveEntryPort.

             If the DS1 is a logical subinterface within the
             physical port, this value is the number of the DS1
             within this slot.

             Examples:
               8 port DS1 card - cctActiveEntryPort and
                                 cctActiveEntryDs1 will have
                                 identical values.
               3 port T3 card  - cctActiveEntryPort represents
                                 T3 ports.
                                 cctActiveEntryEntryDs1 represents
                                 logical T1 interfaces.
                                 Each T3 contains 28 T1 interfaces.
                                 The T1 interfaces are numbered
                                 sequentially across the entire
                                 T3 card.
            
"

        ::= { cctHistoryEntry 22 }


cctHistoryEntryChannel OBJECT-TYPE
        SYNTAX      Integer32 (0..214783647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "The channel or timeslot within the cctHistoryEntryDs1
             which was allocated to the call.
            
"
        ::= { cctHistoryEntry 23 }


cctHistoryCalledPartyId OBJECT-TYPE
        SYNTAX     DisplayString(SIZE(0..64))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The called telephone number for this call.
             For calls answered by the system, this corresponds to
             the Dialed Number Identification (DNIS).

             For calls originated by the system, this is the
             destination number.

             If not available the string length is zero.
            
"
        ::= { cctHistoryEntry 24 }


cctHistoryCallingPartyId OBJECT-TYPE
        SYNTAX     DisplayString(SIZE(0..64))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The calling telephone number for this call.
             For calls answered by the system, this corresponds to
             the calling identification (CLID).

             For calls originated by the system, this is the
             number associated with the device.
             For the interworking call, this object contains the
             translated calling party number if there is a
             translation rule is associated with dial plan for making
             this outgoing call.

             If not available this is a zero-length string.
            
"
        ::= { cctHistoryEntry 25 }


cctHistoryMpBundleId OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Multilink PPP bundle identification for call if
             cctHistoryServiceType has the value 'mp'.

             If the value of cctHistoryServiceType for this call is
             not 'mp', then the value of this object is not
             meaningful.
            
"
        ::= { cctHistoryEntry 26 }


cctHistoryChargedUnits OBJECT-TYPE
        SYNTAX     Gauge32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of charged units for this connection.
             For incoming calls or if charging information is
             not supplied by the switch, the value of this object
             will be zero.
            
"
        REFERENCE
            "AOC-D defined in ETSI Standard: ETS 300 179
            "
        ::= { cctHistoryEntry 27 }


cctHistoryReceiveBytes OBJECT-TYPE
        SYNTAX     Gauge32
        UNITS      "bytes"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of bytes received on the call.  All the
             'raw' bytes are counted including any protocol headers
             which may or may not be present depending on the value
             of cctHistoryServiceType.
            
"
        ::= { cctHistoryEntry 28 }


cctHistoryTransmitBytes OBJECT-TYPE
        SYNTAX     Gauge32
        UNITS      "bytes"
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "The number of bytes transmitted on the call.  All the
             'raw' bytes are counted including any protocol headers
             which may or may not be present depending on the value
             of cctHistoryServiceType.
            
"
        ::= { cctHistoryEntry 29 }


cctHistoryDisconnectTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION            "Value of sysUpTime when call was disconnected.

             This is when the system initiates, detects, or is
             notified of call termination.

             This is the call duration from initial setup request.
            
"
        ::= { cctHistoryEntry 30 }


cctHistoryDisconnectReasonText OBJECT-TYPE
        SYNTAX     DisplayString (SIZE(0..255))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Text description of the disconnect reason provided.

             Value is zero-length string if no text is available.
            
"
        ::= { cctHistoryEntry 31 }


cctHistoryCallSignalingType OBJECT-TYPE
        SYNTAX     CctCallSigType
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION            "Signaling type used to setup the call.
            
"
        ::= { cctHistoryEntry 32 }



-- *****************************************************************
-- Call Tracker Notification Configuration Group
-- *****************************************************************

cctCallSetupTermNotifyEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION            "This variable controls generation of
             cctCallSetupNotification and
             cctCallTerminateNotification.

             When this variable is 'true(1)', generation of
             these notifications is enabled.  When this
             variable is 'false(2)', generation is disabled.

             The default value is 'false(2)'.
            
"
        ::= { cctNotificationConfig 1 }


-- *****************************************************************
-- Notifications
-- *****************************************************************
cctMIBNotificationPrefix  OBJECT IDENTIFIER ::=
                                { ciscoCallTrackerMIB 2 }
cctMIBNotifications       OBJECT IDENTIFIER ::=
                                { cctMIBNotificationPrefix 0 }


cctCallSetupNotification NOTIFICATION-TYPE
    OBJECTS     {
                  cctActiveSetupTime,
                  cctActiveCalledPartyId,
                  cctActiveCallingPartyId,
                  cctActiveCallCategory
                }
    STATUS      current
    DESCRIPTION        "A Call Tracker Setup notification is generated whenever
         a new active call entry is created in the cctActiveTable.
        
"
    ::= { cctMIBNotifications 1 }


cctCallTerminateNotification NOTIFICATION-TYPE
    OBJECTS     {
                  cctHistoryCallId
                }
    STATUS      current
    DESCRIPTION        "A Call Tracker Terminate notification is generated whenever
         a new history call entry is created in the cctHistoryTable.
        
"
    ::= { cctMIBNotifications 2 }

-- *****************************************************************
-- Conformance and Compliances
-- *****************************************************************

cctMIBConformance OBJECT IDENTIFIER ::=
                                { ciscoCallTrackerMIB 3 }
cctMIBCompliances OBJECT IDENTIFIER ::=
                                { cctMIBConformance 1 }
cctMIBGroups      OBJECT IDENTIFIER ::=
                                { cctMIBConformance 2 }

-- compliance statements

cctMIBCompliance MODULE-COMPLIANCE
        STATUS      deprecated -- superceded by cctMIBComplianceRev1
        DESCRIPTION            "The compliance statement for entities which
             implement the CISCO CALL TRACKER MIB
"
        MODULE      -- this module
        MANDATORY-GROUPS
            {
              cctGeneralGroup,
              cctActiveGroup,
              cctHistoryGroup,
              cctNotificationConfigGroup,
              cctNotificationGroup
            }

        ::= { cctMIBCompliances 1 }

cctMIBComplianceRev1 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION            "The compliance statement for entities which
             implement the CISCO CALL TRACKER MIB
"
        MODULE      -- this module
        MANDATORY-GROUPS
            {
              cctGeneralGroup,
              cctActiveGroupRev1,
              cctHistoryGroupRev1,
              cctNotificationConfigGroup,
              cctNotificationGroup
            }

        ::= { cctMIBCompliances 2 }

-- units of conformance


cctGeneralGroup OBJECT-GROUP
        OBJECTS {
            cctCallIdPrefix
        }
        STATUS      current
        DESCRIPTION            "A collection of objects providing the
             general information.
            
"
        ::= { cctMIBGroups 1 }

cctActiveGroup OBJECT-GROUP
        OBJECTS {
            cctActiveTableNumberEntries,
            cctActiveTableHighWaterMark,
            cctActiveSetupTime,
            cctActiveOrigin,
            cctActiveConnectionTime,
            cctActivePhysicalLayerReadyTime,
            cctActiveServiceUpTime,
            cctActiveServiceType,
            cctActiveUserValidationTime,
            cctActiveUserId,
            cctActiveUserIpAddr,
            cctActiveUserSubnetMask,
            cctActiveAccountingSessionId,
            cctActiveCallCategory,
            cctActiveInitialRxRate,
            cctActiveInitialTxRate,
            cctActiveResourceSlot,
            cctActiveResourcePort, 
            cctActiveEntrySlot,
            cctActiveEntryPort, 
            cctActiveEntryDs1, 
            cctActiveEntryChannel,
            cctActiveCalledPartyId,
            cctActiveCallingPartyId, 
            cctActiveMpBundleId, 
            cctActiveChargedUnits,
            cctActiveReceiveBytes,
            cctActiveTransmitBytes
        }
        STATUS      deprecated -- superceded by cctActiveGroupRev1
        DESCRIPTION            "A collection of objects providing the
             active call information.
            
"
        ::= { cctMIBGroups 2 }

cctHistoryGroup OBJECT-GROUP
        OBJECTS {
            cctHistoryTableEntriesLimit,
            cctHistoryTableMaxEntries,
            cctHistoryTableRetainTimer,
            cctHistoryTableNumberEntries,
            cctHistoryTableHighWaterMark,
            cctHistoryTableNewestIndex,
            cctHistoryCallId,
            cctHistorySetupTime,
            cctHistoryOrigin,
            cctHistoryConnectionTime,
            cctHistoryPhysicalLayerReadyTime,
            cctHistoryServiceUpTime,
            cctHistoryServiceType,
            cctHistoryUserValidationTime,
            cctHistoryUserId,
            cctHistoryUserIpAddr,
            cctHistoryUserSubnetMask,
            cctHistoryAccountingSessionId,
            cctHistoryCallCategory,
            cctHistoryInitialRxRate,
            cctHistoryInitialTxRate,
            cctHistoryResourceSlot,
            cctHistoryResourcePort, 
            cctHistoryEntrySlot,
            cctHistoryEntryPort, 
            cctHistoryEntryDs1, 
            cctHistoryEntryChannel,
            cctHistoryCalledPartyId,
            cctHistoryCallingPartyId, 
            cctHistoryMpBundleId, 
            cctHistoryChargedUnits,
            cctHistoryReceiveBytes,
            cctHistoryTransmitBytes,
            cctHistoryDisconnectTime,
            cctHistoryDisconnectReasonText
        }
        STATUS      deprecated -- superceded by cctHistoryGroupRev1
        DESCRIPTION            "A collection of objects providing the
             historical call information.
            
"
        ::= { cctMIBGroups 3 }

cctNotificationConfigGroup OBJECT-GROUP
        OBJECTS {
            cctCallSetupTermNotifyEnable
        }
        STATUS      current
        DESCRIPTION            "A collection of objects providing the
             notification configuration.
            
"
        ::= { cctMIBGroups 4 }

cctNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS {
            cctCallSetupNotification,
            cctCallTerminateNotification
        }
        STATUS current
        DESCRIPTION            "The collection of notifications used for
             call status changes.
            
"
        ::= { cctMIBGroups 5 }

cctActiveGroupRev1 OBJECT-GROUP
        OBJECTS {
            cctActiveTableNumberEntries,
            cctActiveTableHighWaterMark,
            cctActiveSetupTime,
            cctActiveOrigin,
            cctActiveConnectionTime,
            cctActivePhysicalLayerReadyTime,
            cctActiveServiceUpTime,
            cctActiveServiceType,
            cctActiveUserValidationTime,
            cctActiveUserId,
            cctActiveUserIpAddr,
            cctActiveUserSubnetMask,
            cctActiveAccountingSessionId,
            cctActiveCallCategory,
            cctActiveInitialRxRate,
            cctActiveInitialTxRate,
            cctActiveResourceSlot,
            cctActiveResourcePort,
            cctActiveEntrySlot,
            cctActiveEntryPort,
            cctActiveEntryDs1,
            cctActiveEntryChannel,
            cctActiveCalledPartyId,
            cctActiveCallingPartyId,
            cctActiveMpBundleId,
            cctActiveChargedUnits,
            cctActiveReceiveBytes,
            cctActiveTransmitBytes,
            cctActiveCallSignalingType
        }
        STATUS      current
        DESCRIPTION            "A collection of objects providing the
             active call information.
            
"
        ::= { cctMIBGroups 6 }

cctHistoryGroupRev1 OBJECT-GROUP
        OBJECTS {
            cctHistoryTableEntriesLimit,
            cctHistoryTableMaxEntries,
            cctHistoryTableRetainTimer,
            cctHistoryTableNumberEntries,
            cctHistoryTableHighWaterMark,
            cctHistoryTableNewestIndex,
            cctHistoryCallId,
            cctHistorySetupTime,
            cctHistoryOrigin,
            cctHistoryConnectionTime,
            cctHistoryPhysicalLayerReadyTime,
            cctHistoryServiceUpTime,
            cctHistoryServiceType,
            cctHistoryUserValidationTime,
            cctHistoryUserId,
            cctHistoryUserIpAddr,
            cctHistoryUserSubnetMask,
            cctHistoryAccountingSessionId,
            cctHistoryCallCategory,
            cctHistoryInitialRxRate,
            cctHistoryInitialTxRate,
            cctHistoryResourceSlot,
            cctHistoryResourcePort,
            cctHistoryEntrySlot,
            cctHistoryEntryPort,
            cctHistoryEntryDs1,
            cctHistoryEntryChannel,
            cctHistoryCalledPartyId,
            cctHistoryCallingPartyId,
            cctHistoryMpBundleId,
            cctHistoryChargedUnits,
            cctHistoryReceiveBytes,
            cctHistoryTransmitBytes,
            cctHistoryDisconnectTime,
            cctHistoryDisconnectReasonText,
            cctHistoryCallSignalingType
        }
        STATUS      current
        DESCRIPTION            "A collection of objects providing the
             historical call information.
            
"
        ::= { cctMIBGroups 7 }

END






                
                
            
			
        
   
Help  |  Feedback