Guest

Tools & Resources

SNMP Object Navigator


CISCO-CLASS-BASED-QOS-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-CLASS-BASED-QOS-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. IANAifType-MIB Download  |  Download  |  View Dependencies
    4. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    5. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    6. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    7. SNMPv2-MIB Download  |  Download  |  View Dependencies
    8. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    9. IF-MIB Download  |  Download  |  View Dependencies
    10. RFC1271-MIB Not Required  |  Download  |  View Dependencies
    11. BRIDGE-MIB Download  |  Download  |  View Dependencies
    12. TOKEN-RING-RMON-MIB Not Required  |  Download  |  View Dependencies
    13. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    14. RMON-MIB Download  |  Download  |  View Dependencies
    15. CISCO-SMI Download  |  Download  |  View Dependencies
    16. RMON2-MIB Download  |  Download  |  View Dependencies
    17. SNMP-FRAMEWORK-MIB Download  |  Download  |  View Dependencies
    18. RFC1315-MIB Not Required  |  Download  |  View Dependencies
    19. P-BRIDGE-MIB   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    20. CISCO-TC Download  |  Download  |  View Dependencies
    21. CISCO-FRAME-RELAY-MIB Download  |  Download  |  View Dependencies
    22. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    23. Q-BRIDGE-MIB   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    24. CISCO-CLASS-BASED-QOS-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-CLASS-BASED-QOS-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- *****************************************************************
-- Cisco Class-Based QoS Configuration and Statistics MIB
--   
-- Copyright (c) 2000-2004, 2007-2009 by Cisco Systems Inc.
--   
-- All rights reserved.
--   
-- ***************************************************************

CISCO-CLASS-BASED-QOS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Integer32,
    Counter32,
    Gauge32,
    Unsigned32,
    Counter64
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    DisplayString,
    TruthValue
        FROM SNMPv2-TC
    ifIndex,
    InterfaceIndex
        FROM IF-MIB
    VlanIndex
        FROM Q-BRIDGE-MIB
    Unsigned64,
    EntPhysicalIndexOrZero
        FROM CISCO-TC
    DlciNumber
        FROM CISCO-FRAME-RELAY-MIB
    ciscoMgmt
        FROM CISCO-SMI;


ciscoCBQosMIB MODULE-IDENTITY
    LAST-UPDATED    "200904240000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W. Tasman Drive
            San Jose, CA  95134-1706
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-qos@cisco.com"
    DESCRIPTION        "Cisco Class-Based QoS MIB

        **********************************
                    Overview
        **********************************
        This MIB provides read access to Quality of Service (QoS) 
        configuration and statistics information for Cisco 
        platforms that support the Modular Quality of Service 
        Command-line Interface (Modular QoS CLI).  We recommend 
        users of this MIB to review the user documentation of 
        MQC based QoS features.

        Configuration information available through this MIB includes
        all ClassMap, PolicyMap, Match Statements, and Feature 
        Actions configuration parameters. The definitions of each
        objects mentioned above are explained in the QoS objects
        section.

        Statistics available through this MIB include summary
        counts/rates by traffic class before and after any configured
        QoS policies are enforced.  In addition, detailed
        feature-specific statistics are available for select
        PolicyMap features.

        Contact your Cisco representative to determine on which
        platforms the MIB is currently supported.

        **********************************
                   QoS  Acronyms
        **********************************
        BECN: Frame Relay Backward Explicit Congestion Notification
        CIR : Committed Information Rate
        DSCP: Differentiated Service Code Point
        EB  : Estimate Bandwidth
        ECN : Explicite Congestion Notification
        FECN: Frame Relay Forward Explicit Congestion Notification
        IPHC: Internet Protocol Header Compression 
        IPSLAs: IP Service Level Agreement Technologies
        PIR : Peak Information Rate
        PREC: Precedence
        QoS : Quality Of Services
        RED : Random Early Detect
        SRP : Spatial Reuse Protocol
        WRED: Weighted Random Early Detect
        C3PL: Cisco Common Classification Programming Language

        **********************************
                    MIB Objects
        **********************************
        This MIB consists of the following object groups:
        1 :  cbQosServicePolicy
        2 :  cbQosInterfacePolicy
        3 :  cbQosFrameRelayVCPolicy
        4 :  cbQosATMPVCPolicy
        5 :  cbQosObjects
        6 :  cbQosPolicyMapCfg
        7 :  cbQosClassMapCfg
        8 :  cbQosMatchStmtCfg
        9 :  cbQosQueueingCfg
        10:  cbQosREDCfg
        11:  cbQosREDClassCfg
        12:  cbQosPoliceCfg
        13:  cbQosTSCfg
        14:  cbQosSetCfg
        15:  cbQosClassMapStats
        16:  cbQosMatchStmtStats
        17:  cbQosPoliceStats
        18:  cbQosQueueingStats
        19:  cbQosTSStats
        20:  cbQosREDClassStats
        21:  cbQosPoliceActionCfg
        22:  cbQosIPHCCfg
        23:  cbQosIPHCStats
        24:  cbQosSetStats
        25:  cbQosPoliceColorStats
        26:  cbQosTableMapCfg
        27:  cbQosTableMapValueCfg
        28:  cbQosTableMapSetCfg
        29:  cbQosEBCfg
        30:  cbQosEBStats
        31:  cbQosMeasureIPSLACfg
        32:  cbQosC3plAccountCfg
        33:  cbQosC3plAccountStats

        **********************************
                  Definitions
        **********************************
        A logical interface in the context of this MIB is either
        a main-interface, a sub-interface, a Frame Relay DLCI,
        an ATM virtual circuit or the control-plane on the router.

        The (aggregate) control-plane on the router is defined as 
        a collection of processes running at process level on the
        platform (route) processor. This includes the functions 
        related to networking control capabilities such as routing,
        signaling, provisioning, as well as resource and service 
        discovery. Also includes process switched traffic on the
        device. 

        The term distributed control plane, in the context of 
        this mib, represents the control-plane functionality at
        the level of individual linecards. This is only
        applicable for the case of distributed platforms.

        **********************************
                   QoS Objects
        **********************************
        To understand Class-Based QoS features and how to navigate 
        the MIB tables above, the key element is to comprehend the 
        relationships among the different QoS objects. QoS objects 
        consist of ClassMaps, Match Statements and PolicyMaps, 
        and each Feature Actions. 

        Match Statement - The specific match criteria to identify
        packets for classification purposes.

        ClassMap - A user-defined traffic class that contains
        one or many match statements used to classify packets into
        different categories.

        Feature Action - An action is a QoS feature. Features 
        include police, traffic-shaping, queueing, random detect 
        and packet marking(set). After the traffic is being 
        classified, based on the traffic classification, we can 
        apply these action to each traffic class.

        PolicyMap - A user-defined policy that associates each QoS 
        action to the user-defined traffic class (ClassMap).

        Service Policy - Service policy is a policymap
        that is being attached to a logical interface. Because a
        policymap can also be a part of the hierarchical structure 
        (inside a classmap), only a policymap that is directly 
        attached to a logical interface is considered a service 
        policy.  Each service policy is uniquely identified by an 
        index called cbQosPolicyIndex. This number is usually 
        identical to its cbQosObjectsIndex as a policymap.

        *****************************************
        Runtime Instance vs Configuration objects
        *****************************************

        Each QoS objects have 2 sets of behaviours : 
        1: A configuration instance
        - Each QoS objects has it's configuration portion of
          information attached to it. This information does
          not change whether this object is attached on multiple
          logical interfaces and used multiple times. We
          uniquely identify each QoS object with identical
          configuration with the same index - cbQosConfigIndex.
          This index is used in all configuration related
          tables. 

        2: A runtime instance
        - Each QoS objects has it's statistical portion of
          information attached to it. This information changes
          when this object is attached on multiple logical 
          interfaces and used in various different places. We
          uniquely identify each QoS runtime object instance 
          with an index that is unique across multiple 
          instances of the identical object - cbQosObjectsIndex.
          This index is used in all statistical related tables. 

        In summary, a QoS object has 2 indexes associated with it:
        cbQosConfigIndex is used to identify it's configuration, 
        which does not change regardless of number of times and
        where it is being used; and cbQosObjectsIndex is used 
        to identify it's runtime statistics, depending on which
        logical interface and where in a given PolicyMap hierarchy
        this object is used, it may have multiple unique 
        identifiers to distinguish each unique usage (instance) of
        the same object.

        **********************************
                    Navigation
        **********************************
        The recommended method of navigating through all of the MIB 
        tables is to start by learning the cbQosServicePolicyTable 
        and cbQosObjectsTable MIB tables. In particular, Cisco 
        Systems recommends understanding the cbQosObjectsIndex and 
        cbQosParentObjectsIndex of each QoS feature.

        The cbQosPolicyIndex and cbQosObjectsIndex are 
        system-assigned numbers that identify each unique instance 
        of a QoS feature. These indexes are never reused between 
        router reboots, even when changes are made to the QoS 
        configuration. The cbQosPolicyIndex is designed to identify 
        the service policies attached to logical interfaces, while 
        the cbQosObjectsIndex is designed to identify each QoS 
        feature on a specified device.

        The cbQosParentObjectsIndex is designed to show the 
        hierarchical relationship of each QoS feature. 

        **********************************
                cbQosServicePolicyTable
        **********************************
        Accessing cbQosServicePolicyTable requires 
        cbQosPolicyIndex. This index is a system-assigned number 
        to uniquely identify each service policy hanging off of
        each logical interface. Given cbQosPolicyIndex the tables
        provide the type of logical interface/media type on which
        this policy is applied, the direction in which this policy
        is enforced, and the SNMP interface index and/or the entity
        index of the underlying interface/entity. In the case of a
        policy being applied on a Frame Relay DLCI, the cbQosFrDLCI
        gives you the Frame Relay DLCI number to which this policy
        is attached. In the case of policy being attached to an ATM
        VC, cbQosAtmVPI and cbQosAtmVCI display the VPI and VCI of 
        the ATM interface respectively.

        **********************************
                cbQosObjectsTable
        **********************************
        Accessing cbQosObjectsTable requires two indexes, 
        cbQosPolicyIndex and cbQosObjectsIndex. 

        Given a particular service policy on a given logical 
        interface, there could be PolicyMaps, ClassMaps, Match 
        Statements and Feature Actions being used. Each instance 
        of these objects is uniquely identified by
        cbQosObjectsIndex.

        Users need to decide which QoS object is interesting 
        and use the cbQosPolicyIndex and cbQosObjectsIndex to
        locate the right element of interest. This tables provides 
        cbQosObjectsType, cbQosConfigIndex, and 
        cbQosParentObjectsIndex. 

        To understand the relationship of cbQosObjectsIndex, 
        cbQosParentObjectsIndex and the hierarchical relationship 
        of the QoS objects, consider the following QoS 
        configuration example:

        Interface ethernet 0/1
        Input Service Policy cntlWebTraffic
                ClassMap http
                        match ip http
                        set ip precedence 5

        Output Service Policy cntlSNMP_Telnet
                ClassMap snmp
                        match ip snmp
                        shape average 8000 32 32
                ClassMap Telnet
                        match ip telnet
                        shape average 10000 32 32

        Interface ethernet 0/2
        Input Service Policy cntlWebTraffic
                ClassMap http
                        match ip http
                        set ip precedence 5

        Output Service Policy cntlSNMP_Telnet
                ClassMap snmp
                        match ip snmp
                        shape average 8000 32 32
                ClassMap Telnet
                        match ip telnet
                        shape average 10000 32 32

        *** In Ethernet 0/1 ***
        Assume the router assigned a cbQosConfigIndex=1024 and 
        cbQosObjectsIndex=1084 to Policy cntlWebTraffic. 
        Because it is attached to an interface, it has no parent 
        QoS object, and thus cbQosParentObjectsIndex=0. 
        In addition, because cntlWebTraffic is also the service 
        policy of the interface, it has a unique cbQosPolicyIndex 
        assigned to it. In most cases, it would be the same as 
        the cbQosObjectsIndex, which is 1084 in this case. 
        Therefore, the indexes are:
        cbQosPolicyIndex = 1084
        cbQosObjectsIndex = 1084
        cbQosConfigIndex = 1024

        Assuming the router assigned a cbQosObjectsIndex=1085 
        and cbQosConfigIndex=1025 to ClassMap http, it is 
        directly being used by Policy cntlWebTraffic, and therefore
        the cbQosParentObjectsIndex of ClassMap http will be 1084. 

        Assuming the router assigned a cbQosConfigIndex=1026 and
        cbQosObjectsIndex=1086 to match ip http, it is directly 
        used by ClassMap http, therefore the 
        cbQosParentObjectsIndex of match ip http will be 1085.

        Assuming the router assigned a cbQosConfigIndex=1027 and
        cbQosObjectsIndex=1087 to set ip precedence 5, it is 
        directly used by ClassMap http, therefore the 
        cbQosParentObjectsIndex of match ip http will be 1085.

        Assuming the router assigned a cbQosConfigIndex=1028 and 
        cbQosObjectsIndex=1088 to Policy cntlSNMP_Telnet. 
        Because it is attached to an interface, it has no parent 
        QoS object, and thus cbQosParentObjectsIndex=0. 
        In addition, because cntlSNMP_Telnet is also the service 
        policy of the interface, it has a unique cbQosPolicyIndex 
        assigned to it. In most cases, it would be the same as 
        the cbQosObjectsIndex, which is 1088 in this case.

        Assuming the router assigned a cbQosConfigIndex=1029 and
        cbQosObjectsIndex=1089 to ClassMap snmp, it is 
        directly being used by Policy cntlSNMP_Telnet, and 
        therefore the cbQosParentObjectsIndex of ClassMap snmp 
        will be 1088. 

        Assuming the router assigned a cbQosConfigIndex=1030 and
        cbQosObjectsIndex=1090 to match ip snmp, it is directly 
        used by ClassMap snmp, and therefore the 
        cbQosParentObjectsIndex of match ip snmp will be 1089.

        Assuming the router assigned a cbQosConfigIndex=1031 and
        cbQosObjectsIndex=1091 to shape average 8000 32 32, 
        it is directly used by ClassMap snmp, therefore the 
        cbQosParentObjectsIndex of match ip snmp will be 1089.

        Assuming the router assigned a cbQosConfigIndex=1032 and
        cbQosObjectsIndex=1092 to ClassMap Telnet, it is 
        directly being used by Policy cntlSNMP_Telnet, and 
        therefore the cbQosParentObjectsIndex of 
        ClassMap Telnet will be 1088. 

        Assuming the router assigned a cbQosConfigIndex=1033 and
        cbQosObjectsIndex=1093 to match ip telnet, it is 
        directly used by ClassMap Telnet, and therefore the 
        cbQosParentObjectsIndex of match ip telnet will be 1092.

        Assuming the router assigned a cbQosConfigIndex=1034 and
        cbQosObjectsIndex=1094 to shape 10000 32 32, it is 
        directly used by ClassMap telnet, therefore the 
        cbQosParentObjectsIndex of match ip telnet will be 1092.

        *** In Ethernet 0/2 ***
        Every objects will have a new and unique cbQosPolicyIndex 
        and cbQosObjectsIndex, but cbQosConfigIndex will be 
        shared across the same objects that are applied in 
        different places.

        **********************************
                 All Config Tables
        **********************************
        Accessing config related tables requires the same index 
        - cbQosConfigIndex.  (Per precedence based tables requires 
        a second index, which is IP precedence value) Users 
        should have already gone through the cbQosObjectsTable 
        at this point and understood each cbQosConfigIndex and the 
        corresponding QoS objects.  Users can uniquely identify 
        each QoS object defined on the router and query the 
        entries in each stats table on a per QoS object basis.  

        **********************************
                 All Stats Tables
        **********************************
        Accessing all stats related tables requires the same 
        2 indexes. They are cbQosPolicyIndex and cbQosObjectsIndex.
        (Per precedence based tables requires a third index, which 
        is IP precedence value) Users should have already gone 
        through the cbQosObjectsTable at this point and understood 
        the relationship of each cbQosPolicyIndex and 
        cbQosObjectsIndex pair and the corresponding QoS objects. 
        Users can uniquely identify each QoS object defined on the 
        router and query the entries in each stats table on a per 
        QoS object basis.
"
    REVISION        "200904240000Z"
    DESCRIPTION        "- Added cbQosSetCfgFrDe to hold the Fr-De marking configuration
        value in cbQosSetCfgTable. 
        - Updated the optional groups of ciscocbQosMIBComplianceRev7
        with cbQosSetCfgFrDeGroup.
        - Added MODULE-COMPLIANCE ciscocbQosMIBComplianceRev8.
"
    REVISION        "200901260000Z"
    DESCRIPTION        "Added account feature in QosObjectType.
"
    REVISION        "200811200000Z"
    DESCRIPTION        "Added cbQosC3plAccountCfgGroup and cbQosC3plAccountStatsGroup.
"
    REVISION        "200806170000Z"
    DESCRIPTION        "-Added ratioRemaining in QueueingBandwidthUnits
        -Added l2CosInner in SetFeatureType 
        -Added cbQosQueueingCfgPriorityLevel in cbQosQueueingCfgTable
        -Added cbQosSetCfgL2CosInnerValue in cbQosSetCfgTable
        -Added in  cbQosREDClassCfgTable
                   cbQosREDClassCfgMaxThresholdUnit,
                   cbQosREDClassCfgMinThresholdUnit  
        -Added cbQosQueueingClassCfgTable
        - Added following OBJECT-GROUPs 
             cbQosQueueingCfgGroupRev2 
             cbQosSetCfgL2Group 
             cbQosQueueingClassCfgGroup
             cbQosPoliceCfgGroupRev3
        - Added MODULE-COMPLIANCE cisco
        cbQosMIBComplianceRev6
"
    REVISION        "200710090000Z"
    DESCRIPTION        "1. Added cbQosTSCfgRate64 to cbQosTSCfgTable
        to support shaping rates greater than that fit in
        the range defined for cbQosTSCfgRate.
        2. Created cbQosTSCfgExtGroup.    
        3. Created  new compliance module ciscocbQosMIBComplianceRev5
        which deprecates ciscocbQosMIBComplianceRev4.
"
    REVISION        "200708300000Z"
    DESCRIPTION        "Added 'setL2CosInner' value to PoliceAction TC.
"
    REVISION        "200707100000Z"
    DESCRIPTION        "Added following enumerations to RedMechanism TC:
        mplsExp 
        redDefault 
        redUserDefault
"
    REVISION        "200409200000Z"
    DESCRIPTION        "1. Added vlan-port as a new InterfaceType.
        2. Created cbQosServicePolicyExtGroup.
"
    REVISION        "200404120000Z"
    DESCRIPTION        "Added support for Estimate Bandwidth and its Corvil
        implementation. Corvil's algorithm generates the 
        estimated bandwidth for a class of traffic from 
        knowledge of the QoS targets such as delay and drop, 
        and the observed traffic behavior.
"
    REVISION        "200307240000Z"
    DESCRIPTION        "Added setIpDscpTunnel, setIpPrecedenceTunnel
        to the PoliceAction TC. 
        Added srpPriority, frFecnBecn, ipDscpTunnel,
        ipPrecedenceTunnel to the SetFeatureType TC. 
        Added l2Cos, atmClp to the REDMechanism TC. 
        Added cps to the CbQosRateType TC. 
        Added CbQosTMSetType TC. 
        Added cbQosQueueingCfgAggrQLimitTime
        to the cbQosQueueingCfgTable.
        Added cbQosREDClassCfgMinThresholdTime,
        cbQosREDClassCfgMaxThresholdTime
        to the cbQosREDClassCfgTable.
        Added cbQosPoliceCfgCellRate,
        cbQosPoliceCfgCellPir,
        cbQosPoliceCfgBurstCell,
        cbQosPoliceCfgExtBurstCell,
        cbQosPoliceCfgBurstTime,
        cbQosPoliceCfgExtBurstTime,
        cbQosPoliceCfgCdvt,
        cbQosPoliceCfgConformColor,
        cbQosPoliceCfgExceedColor 
        to the cbQosPoliceCfgTable.
        Added cbQosTSCfgBurstTime, cbQosTSCfgExtBurstTime 
        to the cbQosTSCfgTable.
        Added cbQosSetCfgSrpPriority, cbQosSetCfgFrFecnBecn 
        to the cbQosSetCfgTable.
        Added cbQosSetStatsTable.
        Added cbQosPoliceColorStatsTable.
        Added cbQosTableMapCfgTable.
        Added cbQosTableMapValueCfgTable.
        Added cbQosTableMapSetCfgTable.
"
    REVISION        "200306090000Z"
    DESCRIPTION        "Added controlPlane to the InterfaceType TC.
        Added cbQosEntityIndex to the cbQosServicePolicyTable.
"
    REVISION        "200301210000Z"
    DESCRIPTION        "Added compression(9) in QosObjectType TC for IPHC;
        Added setMplsExpTopMost(11) in PoliceAction TC for 
              POLICE;
        Added mplsExpTopMost(8) in SetFeatureType TC for SET;
        Added discardClass(13) in REDMechanism TC for WRED;
        Added CbQosRateType TC for POLICE and SHAPE;
        Added IPHCOption TC for IPHC;
        Added cbQosPoliceCfgRateType, 
              cbQosPoliceCfgPercentRateValue,
              cbQosPoliceCfgPercentPirValue for POLICE;
        Added cbQosTSCfgRateType,
              cbQosTSCfgPercentRateValue for SHAPE;
        Added cbQosSetCfgMplsExpTopMostValue for SET;
        Added cbQosIPHCCfg and cbQosIPHCStats tables for IPHC.
"
    REVISION        "200212030000Z"
    DESCRIPTION        "Added new cbQosPoliceCfgRate64 to cbQosPoliceCfgEntry
        table to support policing rates greater than fit in
        the range defined for cbQosPoliceCfgRate
"
    REVISION        "200207240000Z"
    DESCRIPTION        "Added support for ECN; Pir policing; multiple
        police actions; added MPLS-EXP/ATM-CLP/DR-DE/
        L2Cos/DiscardClass marking in police action;
        added MPLS-EXP and DiscardClass marking; 
        modified ATM-CLP and FR-DE marking.
        Added objects to handle queue depth unit type and 
        queue depth pair related objects (e.g.,
        cbQosQueueingCfgQLimitUnits and 
        cbQosQueueingCfgAggregateQLimit pair) to support
        queue depth in different units.
"
    REVISION        "200103140000Z"
    DESCRIPTION        "Added support for FR DE, ATM CLP and L2 marking.
        Added Bandwidth remaining percent option
"
    REVISION        "200012080000Z"
    DESCRIPTION        "Added support for Police Violate counters and
        DSCP WRED counters
"
    REVISION        "200007130000Z"
    DESCRIPTION        "Initial version of Class-based QoS configuration and
        statistical parameters MIB
"
    ::= { ciscoMgmt 166 }



-- Textual Conventions

QueueMechanism ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "This denotes which mechanism is used with QueueLimit.

        precedence      Based on IP precedence
        dscp            Based on DSCP values
        discardClass    Based on discard class
        qosGroup        Based on qosgroup class
        atmClp          Based on atm-clp class
        mplsExp         Based on MPLS Experimental class
"
    SYNTAX          INTEGER  {
                        precedence(1),
                        dscp(2),
                        discardClass(3),
                        qosGroup(4),
                        atmClp(5),
                        mplsExp(6)
                    }

QosObjectType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate different QoS objects .
        policymap      - The object in query is a PolicyMap, being
                         attached on a logical interface.
        classmap       - The object in query is a ClassMap, being
                         used by it's parent PolicyMap.
        matchStatement - The object in query is a Match Statement,
                         being used by it's parent ClassMap.
        queueing       - The object in query is a queueing feature being
                         applied on the parent ClassMap.
        randomDetect   - The object in query is a Random Detect feature 
                         being applied on the parent ClassMap.
        trafficShaping - The object in query is a traffic-shaping 
                         feature being applied on the parent ClassMap.
        police         - The object in query is a Police feature being 
                         applied on the parent ClassMap.
        set            - The object in query is a Packet Marking 
                         feature being applied on the parent ClassMap.
        compression    - The object in query is a IP header compression
                         feature being applied on the parent ClassMap.
        ipslaMeasure   - The object in query is Measure IPSLAs feature  
                         being applied on the parent ClassMap.
        account         - The object in query is C3Pl_Account feature being
                         applied on the parent ClassMap.
"
    SYNTAX          INTEGER  {
                        policymap(1),
                        classmap(2),
                        matchStatement(3),
                        queueing(4),
                        randomDetect(5),
                        trafficShaping(6),
                        police(7),
                        set(8),
                        compression(9),
                        ipslaMeasure(10),
                        account(11)
                    }

TrafficDirection ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate whether the Policymap is for
        Input or Output direction.
"
    SYNTAX          INTEGER  {
                        input(1),
                        output(2)
                    }

QosClassInfo ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate whether the Classmap is for
        Match All or Match Any.
"
    SYNTAX          INTEGER  {
                        none(1),
                        matchAll(2),
                        matchAny(3)
                    }

QosMatchInfo ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate whether the MatchStatement is matching
        on negated criteria (Match Not).
"
    SYNTAX          INTEGER  {
                        none(1),
                        matchNot(2)
                    }

InterfaceType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate the type of logical interface to which
        a particular service policy is attached.
        Main Interface   - Service policy is attached on the main 
                      interface.
        Sub Interface    - Service policy is attached on the sub 
                      interface.
        Frame Relay DLCI - Service policy is attached on the a 
                      Frame Relay DLCI.
        ATM VC           - Service policy is attached on the an ATM 
                      Virtual Circuit.
        Control Plane    - Service policy is attached to the control
                      plane of the device.
        Vlan Port        - Service policy is attached to a particular
                      vlan of a layer 2 interface that can carry
                      traffic on multiple vlans.
"
    SYNTAX          INTEGER  {
                        mainInterface(1),
                        subInterface(2),
                        frDLCI(3),
                        atmPVC(4),
                        controlPlane(5),
                        vlanPort(6)
                    }

QueueingBandwidthUnits ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The units of the bandwidth, used to allocate
        bandwidth. Bandwidth can be either an absolute kbps 
        number, or be expressed as a percentage of the 
        available bandwidth.  

        kbps                Allocated bandwidth in Kilo bits Per Second

        percentage          Allocated bandwidth as percentage of 
                            reference  bandwidth.

        percentageRemaining Percentage of unallocated bandwidth
                            reserved for this class.

        ratioRemaining       Ratio of unallocated bandwidth reserved 
                             for this class (in relation to other 
                             classes).
"
    SYNTAX          INTEGER  {
                        kbps(1),
                        percentage(2),
                        percentageRemaining(3),
                        ratioRemaining(4)
                    }

TrafficShapingLimit ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The limit used by the traffic-shaping feature.
        This value may be 'average' or 'peak',
        which indicates whether it is shaping by average
        rate or peak rate.
"
    SYNTAX          INTEGER  {
                        average(1),
                        peak(2)
                    }

PoliceAction ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The available actions taken on packets upon
        conforming, exceeding or violating the configured 
        police rate.

        Transmit - Transmit the packet if the packet conforms 
                   or exceeds the configured police rate.
        Set IP DSCP - Set the IP DSCP value if the packet
                      conforms or exceeds the configured police
                      rate.
        Set IP Precedence - Set the IP precedence value if
                            the packet conforms or exceeds 
                            the configured police rate.
        Set Qos Group - Set the QoS Group value if
                        the packet conforms or exceeds 
                        the configured police rate.
        Set MPLS Exp - Set the MPLS Experimental Imposition
                       vaule for the applicable action.
        Set ATM CLP  - Set the ATM CLP bit for the
                       applicable action.
        Set FR DE    - Set the FR DE bit for the
                       applicable action.
        Set L2 COS   - Set the 802.1p priority field in 802.1Q 
                       VLAN tag for the applicable action.
        Set Discard Class - Set the Discard Class value for the
                       applicable action.              
        Drop - Drop the packet if the packet conforms or 
               exceeds the configured police rate.
        Set MPLS Exp TopMost - Set the MPLS Experimental 
               TopMost vaule for the applicable action.
        Set IP DSCP Tunnel - Set the IP DSCP Tunnel
               value for the applicable action.
        Set IP Precedence Tunnel - Set the IP Precedence
               Tunnel value for the applicable action.
        Set Inner L2 COS   - Set the 802.1p priority field in inner 
                       802.1q VLAN tag (QinQ) for the applicable
        action.
"
    SYNTAX          INTEGER  {
                        transmit(1),
                        setIpDSCP(2),
                        setIpPrecedence(3),
                        setQosGroup(4),
                        drop(5),
                        setMplsExp(6),
                        setAtmClp(7),
                        setFrDe(8),
                        setL2Cos(9),
                        setDiscardClass(10),
                        setMplsExpTopMost(11),
                        setIpDscpTunnel(12),
                        setIpPrecedenceTunnel(13),
                        setL2CosInner(14) -- QinQ inner L2 CoS                        
                    }

SetFeatureType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Bit-wise representation of packet marking feature available
        today.  For historical reason, both packet marking and SET
        terms have been used across Cisco Class-Based QOS, but they
        have the same meaning.  This feature is used to mark/set
        appropriate fields(e.g, dscp, precedence, mpls-experimental
        -topmost,l2CosInner) for applicable packets.
          ipDscp             Packet set/mark with DSCP bit
          ipPrecedence       Packet set/mark with Precedence bit
          qosGroupNumber     Packet set/mark with QosGroup bit
          frDeBit            Packet set/mark with FR-DE  bit
          l2Cos              Packet set/mark with COS bit
          mplsExp            Packet set/mark with MPLS Experimental bit
          discardClass       Packet set/mark with discard class bit
          mplsExpTopMost     Packet set/mark with MPLS Experimental   
                             topmost bit             
          srpPriority        Packet set/mark with srp priority bit
          frFecnBecn         Packet set/mark with FECN bit
          ipDscpTunnel       Packet set/mark with DSCP tunnel bit
          ipPrecedenceTunnel Packet set/mark with Precedence tunnel bit
          l2CosInner         Packet set/mark with COS inner bit
"
    SYNTAX          BITS {
                        ipDscp(0),
                        ipPrecedence(1),
                        qosGroupNumber(2),
                        frDeBit(3),
                        atmClpBit(4),
                        l2Cos(5),
                        mplsExp(6),
                        discardClass(7),
                        mplsExpTopMost(8),
                        srpPriority(9),
                        frFecnBecn(10),
                        ipDscpTunnel(11),
                        ipPrecedenceTunnel(12),
                        l2CosInner(13)
                    }

REDMechanism ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "This denotes which mechanism is used with RED.

        precedence      Based on IP precedence
        dscp            Based on DSCP values
        discardClass    Based on discard class
        l2Cos           Based on L2-COS class
        atmClp          Based on ATM-CLP class
        mplsExp         Based on MPLS Experimental values
        redDefault      Default RED profile
        redUserDefault  User specified Default RED profile
"
    SYNTAX          INTEGER  {
                        precedence(1),
                        dscp(2),
                        discardClass(3),
                        l2Cos(4),
                        atmClp(5),
                        mplsExp(6),
                        redDefault(7),
                        redUserDefault(8)
                    }

CbQosQueueUnitType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "A value that represents an unit type of queue
        size.

        packets(1)   Represents the UNITS of 'packets' for
                     queue size.

        cells(2)     Represents the UNITS of 'cells' for 
                     queue size.

        bytes(3)     Represents the UNITS of 'bytes' for 
                     queue size.

        ms(4)        Represents the UNITS of 'milli-seconds' for
                     queue size

        us(5)        Represents the UNITS of 'micro-seconds' for
                     queue size

        To support future extensions, the CbQosQueueUnitType 
        textual convention SHOULD NOT be sub-typed in object
        type definitions.

        It MAY be sub-typed in compliance statements in order to
        require only a subset of these queue size types for a 
        compliant implementation.

        Implementations must ensure that CbQosQueueUnitType 
        objects and any dependent object (e.g. CbQosQueueDepth) 
        are consistent. An inconsistentValue error must be 
        generated if an attempt to change an CbQosQueueUnitType 
        object would lead to an undefined CbQosQueueDepth value.
        In particular, CbQoSQueueUnitType/CbQosQueueDepth pairs 
        must be changed together if the CbQosQueueUnitType
        type changes (e.g. from packets(1) to cells(2)).
"
    SYNTAX          INTEGER  {
                        packets(1),
                        cells(2),
                        bytes(3),
                        ms(4),
                        us(5)
                    }

CbQosQueueDepth ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Denotes a generic Queue depth value.

        An CbQoSQueueDepth value is always interpreted within 
        the context of an CbQosQueueUnitType value. Every usage 
        of the CbQosQueueDepth textual convention is required to
        specify the CbQosQueueUnitType object which provides 
        the context. It is suggested that the 
        CbQoSQueueUnitType object is logically registered 
        before the object(s) which use the CbQosQueueDepth 
        textual convention if they appear in the same logical
        row. The value of an CbQosQueueDepth object must always
        be consistent with the value of the associated
        CbQosQueueUnitType object. Attempts to set an
        CbQosQueueDepth object to a value which is inconsistent 
        with the associated CbQosQueueUnitType must fail with 
        an inconsistentValue error.
"
    SYNTAX          Unsigned32

CbQosRateType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The type of rate.  Rate type can be either an
        absolute bps number, or be expressed as a percentage 
        of the available interface bandwidth, or an absolute
        cps number.

        bps             Bits Per Second
        percentage      %
        cps             Cells Per Second
"
    SYNTAX          INTEGER  {
                        bps(1),
                        percentage(2),
                        cps(3)
                    }

IPHCOption ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate the type of IP header compression.
        rtp(1)         UDP/RTP compression.
        tcp(2)         TCP compression.
        bothRtpTcp(3)  Both UDP/RTP and TCP compression.
"
    SYNTAX          INTEGER  {
                        rtp(1),
                        tcp(2),
                        bothRtpTcp(3)
                    }

CbQosTMSetType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The available packet marking types which can use
        tablemap to establish to-from relationship for
        enhanced packeting marking.
"
    SYNTAX          INTEGER  {
                        none(0),
                        ipDscp(1),
                        ipPrecedence(2),
                        qosGroup(3),
                        l2Cos(4),
                        mplsExpImp(5),
                        mplsExpTop(6)
                    }

CbQosEBType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "A value that indicates the type of bandwidth
        estimate algorithm.
        typeNone         no algorithm is selected
        typeCorvil         algorithm based on Corvil
                         bandwidth calculation.
"
    SYNTAX          INTEGER  {
                        typeNone(0),
                        typeCorvil(1)
                    }

CbQosEBCtd ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "A CTD (Corvil Traffic Descriptor) specific value.
"
    SYNTAX          OCTET STRING

SetC3plAccountFeatureType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "Enums to indicate drop types for C3PL Account action.
"
    SYNTAX          INTEGER  {
                        queueing(0),
                        wred(1),
                        police(2)
                    }
-- Overview of MIB Objects:
--   
-- Defines 2 groups of objects.

ciscoCBQosMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIB 1 }

ciscocbQosMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIB 2 }

-- object groups

cbQosServicePolicy  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 1 }

cbQosInterfacePolicy  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 2 }

cbQosFrameRelayVCPolicy  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 3 }

cbQosATMPVCPolicy  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 4 }

cbQosObjects  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 5 }

cbQosPolicyMapCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 6 }

cbQosClassMapCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 7 }

cbQosMatchStmtCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 8 }

cbQosQueueingCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 9 }

cbQosREDCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 10 }

cbQosREDClassCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 11 }

cbQosPoliceCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 12 }

cbQosTSCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 13 }

cbQosSetCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 14 }

cbQosClassMapStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 15 }

cbQosMatchStmtStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 16 }

cbQosPoliceStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 17 }

cbQosQueueingStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 18 }

cbQosTSStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 19 }

cbQosREDClassStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 20 }

cbQosPoliceActionCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 21 }

cbQosIPHCCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 22 }

cbQosIPHCStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 23 }

cbQosSetStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 24 }

cbQosPoliceColorStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 25 }

cbQosTableMapCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 26 }

cbQosTableMapValueCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 27 }

cbQosTableMapSetCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 28 }

cbQosEBCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 29 }

cbQosEBStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 30 }

cbQosMeasureIPSLACfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 31 }

cbQosQueueingClassCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 32 }

cbQosC3plAccountCfg  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 33 }

cbQosC3plAccountStats  OBJECT IDENTIFIER
    ::= { ciscoCBQosMIBObjects 34 }

-- The cbQosQueueingClass group

cbQosQueueingClassCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosQueueingClassCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies the configuration information for weighted
        queue limit action per IP precedence basis.
"
    ::= { cbQosQueueingClassCfg 1 }

cbQosQueueingClassCfgEntry OBJECT-TYPE
    SYNTAX          CbQosQueueingClassCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about a weighted queueing action. The information
        includes: Threshold value, Units and wieght Type
        (ip,dscp,mplsExp)

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex(which refers to cbQosConfigIndex of
        cbQosQueueingCfgEntry) and cbQosQueueingClassConfigIndex
        cbQosQlimitWeightValue  
        i.e(prec,dscp,discard-class,qos-group,atm-clp,
        mplsExp) of each Weighted Queueing Action.
"
    INDEX           {
                        cbQosConfigIndex,
                        cbQosQueueingClassConfigIndex,
                        cbQosQlimitWeightValue
                    } 
    ::= { cbQosQueueingClassCfgTable 1 }

CbQosQueueingClassCfgEntry ::= SEQUENCE {
        cbQosQueueingClassConfigIndex      Integer32,
        cbQosQlimitWeightValue             Integer32,
        cbQosQueueingClassCfgThreshold     CbQosQueueDepth,
        cbQosQueueingClassCfgThresholdUnit CbQosQueueUnitType,
        cbQosQueueingClassCfgQLimitWeight  QueueMechanism
}

cbQosQueueingClassConfigIndex OBJECT-TYPE
    SYNTAX          Integer32 (0..65535)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This objects depict the config index for Weighted  Queue limit
        configured.
" 
    ::= { cbQosQueueingClassCfgEntry 1 }

cbQosQlimitWeightValue OBJECT-TYPE
    SYNTAX          Integer32 (0..63)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This object depict the weight value configured for
        weighted Queue-limit.
        The Weight value is IP precedence or IP DSCP of this entry.
" 
    ::= { cbQosQueueingClassCfgEntry 2 }

cbQosQueueingClassCfgThreshold OBJECT-TYPE
    SYNTAX          CbQosQueueDepth
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object is used to depict the Threshold value for the
        Weighted Queue Limit.
" 
    ::= { cbQosQueueingClassCfgEntry 3 }

cbQosQueueingClassCfgThresholdUnit OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object is used to depict the Threshold Unit for the
        Weighted Queue Limit
" 
    ::= { cbQosQueueingClassCfgEntry 4 }

cbQosQueueingClassCfgQLimitWeight OBJECT-TYPE
    SYNTAX          QueueMechanism
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This objects depict the weight value for Weighted Queue limit
        configured
        i.e(precedence,dscp,qos-group,atm-clp,discard-class,mplsExp)    

        .
" 
    ::= { cbQosQueueingClassCfgEntry 5 }
 

-- End of cbQosQueueingClass group

cbQosMeasureIPSLACfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosMeasureIPSLACfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies configuration information for measure type
        IPSLA action. The measure action relates the policy class to a
        specific IPSLAs auto group. Configuration of measure action of
        type IPSLA results in automatic generation of IPSLAs synthetic
        test operations when the policy is attached to interface. The
        operations are created according to the characteristics
        specified and to the destinations specified in IPSLA auto group.
        The IPSLAs sythentic test operations measure network statistics
        such as latency, packet loss and jitter.
        This table is to be used only for retrieving the measure
        action configuration information.
"
    ::= { cbQosMeasureIPSLACfg 1 }

cbQosMeasureIPSLACfgEntry OBJECT-TYPE
    SYNTAX          CbQosMeasureIPSLACfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry describes configuration information about
        one instance of IPSLAs measure action in the policy map.
        The table is indexed by the cbQosConfigIndex and
        cbQosMeasureIPSLACfgGroupIndex.
"
    INDEX           {
                        cbQosConfigIndex,
                        cbQosMeasureIPSLACfgGroupIndex
                    } 
    ::= { cbQosMeasureIPSLACfgTable 1 }

CbQosMeasureIPSLACfgEntry ::= SEQUENCE {
        cbQosMeasureIPSLACfgGroupIndex Unsigned32,
        cbQosMeasureIPSLACfgGroupName  DisplayString
}

cbQosMeasureIPSLACfgGroupIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for each
        instance of IPSLAs measure action. The index is unique
        for each instance for a particular class in particular
        policy-map. For example consider following configuration:
             policy-map p1
                class c1
                  measure type ip-sla group g1
                  measure type ip-sla group g2
                class c2
                  measure type ip-sla group g3

        In this case the cbQosMeasureIPSLACfgGroupIndex value
        for first measure action instance under class c1 will be 1,
        for second instance it will be 1, and so on. The value
        for the index will start over again from 1 for class c2.
" 
    ::= { cbQosMeasureIPSLACfgEntry 1 }

cbQosMeasureIPSLACfgGroupName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "IPSLAs auto group name. Group is an aggregation of
        operations sharing the same type, for example udp-jitter
        type, with common characteristics like frequency,
        interval etc.  Groups are formed by policies dictated
        either by customer, or by service level or any other
        requirements.
" 
    ::= { cbQosMeasureIPSLACfgEntry 2 }
 

-- The cbQosServicePolicy group

cbQosServicePolicyTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosServicePolicyEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table describes the logical interfaces/media types
        and the policymap that are attached to it.
"
    ::= { cbQosServicePolicy 1 }

cbQosServicePolicyEntry OBJECT-TYPE
    SYNTAX          CbQosServicePolicyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes to which a logical
        interface a given policymap is attached.  Depending on 
        the logical interface/media type, some fields may have
        meaningful values, and some may not.  Please see each
        individual descriptions.
"
    INDEX           { cbQosPolicyIndex } 
    ::= { cbQosServicePolicyTable 1 }

CbQosServicePolicyEntry ::= SEQUENCE {
        cbQosPolicyIndex     Unsigned32,
        cbQosIfType          InterfaceType,
        cbQosPolicyDirection TrafficDirection,
        cbQosIfIndex         InterfaceIndex,
        cbQosFrDLCI          DlciNumber,
        cbQosAtmVPI          Unsigned32,
        cbQosAtmVCI          Unsigned32,
        cbQosEntityIndex     EntPhysicalIndexOrZero,
        cbQosVlanIndex       VlanIndex
}

cbQosPolicyIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for all
        service policies (PolicyMap that has been attached
        to a given logical interface).
" 
    ::= { cbQosServicePolicyEntry 1 }

cbQosIfType OBJECT-TYPE
    SYNTAX          InterfaceType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This describes the logical interface/media type to
        which this service policy is attached.
" 
    ::= { cbQosServicePolicyEntry 2 }

cbQosPolicyDirection OBJECT-TYPE
    SYNTAX          TrafficDirection
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This indicates the direction of traffic for which
        this service policy is applied.
" 
    ::= { cbQosServicePolicyEntry 3 }

cbQosIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "ifIndex for the interface to which this service
        is attached. This field makes sense only if the
        logical interface has a snmp ifIndex. For e.g. the
        value of this field is meaningless when the
        cbQosIfType is controlPlane.
" 
    ::= { cbQosServicePolicyEntry 4 }

cbQosFrDLCI OBJECT-TYPE
    SYNTAX          DlciNumber
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "DLCI for the FRVC to which this service is attached.
        This field only make sense if the service policy is
        attached to a Frame Relay DLCI.
" 
    ::= { cbQosServicePolicyEntry 5 }

cbQosAtmVPI OBJECT-TYPE
    SYNTAX          Unsigned32 (0..4095)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "VPI for the ATMVC to which this service is attached.
        This field only make sense if the service policy is
        attached to a ATM VC.
" 
    ::= { cbQosServicePolicyEntry 6 }

cbQosAtmVCI OBJECT-TYPE
    SYNTAX          Unsigned32 (0..65535)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "VCI for the ATMVC to which this service is attached.
        This field only make sense if the service policy is
        attached to a ATM VC.
" 
    ::= { cbQosServicePolicyEntry 7 }

cbQosEntityIndex OBJECT-TYPE
    SYNTAX          EntPhysicalIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "In cases where the policy is attached to an entity
        e.g. control-plane, this object represents the
        entity physical index of the entity to which the
        policy has been attached. A value zero may be 
        returned if the policy is not attached to a physical
        entity or the entPhysicalTable is not supported on 
        the SNMP agent.
" 
    ::= { cbQosServicePolicyEntry 8 }

cbQosVlanIndex OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "If the service policy is attached to a particular
        vlan on a trunk or multi-vlan access port, then this
        object specifies the corresponding VLAN. In all other
        cases the value of this object is '0'.
" 
    ::= { cbQosServicePolicyEntry 9 }
 

-- End of the cbQosServicePolicy group
--   

--   
-- Beginning of cbQosInterfaceTable

cbQosInterfacePolicyTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosInterfacePolicyEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table describes the service polices that are
        attached to main and sub interfaces.
"
    ::= { cbQosInterfacePolicy 1 }

cbQosInterfacePolicyEntry OBJECT-TYPE
    SYNTAX          CbQosInterfacePolicyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Using ifIndex and Direction, each unique index pair
        translates to a service policy that is attached to a 
        main/sub interface, for particular traffic direction.
"
    INDEX           {
                        ifIndex,
                        cbQosPolicyDirection
                    } 
    ::= { cbQosInterfacePolicyTable 1 }

CbQosInterfacePolicyEntry ::= SEQUENCE {
        cbQosIFPolicyIndex Unsigned32
}

cbQosIFPolicyIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for all
        Service Policies. 

        This is identical to cbQosPolicyIndex.
" 
    ::= { cbQosInterfacePolicyEntry 1 }
 

-- End of cbQosInterfaceTable
--   

-- Beginning of cbQosFrameRelayVCPolicy

cbQosFrameRelayPolicyTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosFrameRelayPolicyEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table describes the service polices that are
        attached to Frame Relay DLCIs.
"
    ::= { cbQosFrameRelayVCPolicy 1 }

cbQosFrameRelayPolicyEntry OBJECT-TYPE
    SYNTAX          CbQosFrameRelayPolicyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Using ifIndex, FR DLCI, and Direction, each unique
        index combination translates to a service policy that 
        is attached to a FR DLCI, for particular traffic direction.
"
    INDEX           {
                        ifIndex,
                        cbQosFrDLCI,
                        cbQosPolicyDirection
                    } 
    ::= { cbQosFrameRelayPolicyTable 1 }

CbQosFrameRelayPolicyEntry ::= SEQUENCE {
        cbQosFRPolicyIndex Unsigned32
}

cbQosFRPolicyIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for all
        Service Policies.

        This is identical to cbQosPolicyIndex.
" 
    ::= { cbQosFrameRelayPolicyEntry 1 }
 

-- End of cbQosFrameRelayTable
--   

--   
-- Beginning of cbQosATMPVCPolicy

cbQosATMPVCPolicyTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosATMPVCPolicyEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table describes the policies that are attached to a
        ATM PVC.
"
    ::= { cbQosATMPVCPolicy 1 }

cbQosATMPVCPolicyEntry OBJECT-TYPE
    SYNTAX          CbQosATMPVCPolicyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Using ifIndex, VPI, VCI, and Direction, each unique
        index combination translates to a service policy that 
        is attached to a ATM VC, for particular traffic direction.
"
    INDEX           {
                        ifIndex,
                        cbQosAtmVPI,
                        cbQosAtmVCI,
                        cbQosPolicyDirection
                    } 
    ::= { cbQosATMPVCPolicyTable 1 }

CbQosATMPVCPolicyEntry ::= SEQUENCE {
        cbQosATMPolicyIndex Unsigned32
}

cbQosATMPolicyIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for all
        Service Policies.

        This is identical to cbQosPolicyIndex.
" 
    ::= { cbQosATMPVCPolicyEntry 1 }
 

-- End of cbQosATMPVCTable
--   

--   
-- The cbQosObjects group
--   
-- cbQosObjects Table

cbQosObjectsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosObjectsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies QoS objects (classmap, policymap,
        match statements, and actions) hierarchy. This table also 
        provide relationship between each PolicyIndex/ObjectsIndex 
        pair and the ConfigIndex. ConfigIndex is essential for 
        querying any configuration tables.
"
    ::= { cbQosObjects 1 }

cbQosObjectsEntry OBJECT-TYPE
    SYNTAX          CbQosObjectsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "A QoS object entry. Objects covered in this table are
        PolicyMap, ClassMap, Match Statements, and Actions.
        Each entry is indexed by system-generated cbQosPolicyIndex,
        and cbQosObjectsIndex, which represents a runtime instance 
        of a QoS object. In conjunction with the 
        cbQosParentObjectsIndex, a management station can 
        determine the hierarchical relationship of those QoS 
        objects. Given that classmaps and service policies can 
        be nested entites, each entry in this table represents a 
        unique instance of such object. Each runtime object 
        instance has a corresponding config object, which contains
        the configuration information of such QoS object. The
        config object is indexed by cbQosConfigIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosObjectsTable 1 }

CbQosObjectsEntry ::= SEQUENCE {
        cbQosObjectsIndex       Unsigned32,
        cbQosConfigIndex        Unsigned32,
        cbQosObjectsType        QosObjectType,
        cbQosParentObjectsIndex Unsigned32
}

cbQosObjectsIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) instance specific
        index for cbQosObjectsEntry.
" 
    ::= { cbQosObjectsEntry 1 }

cbQosConfigIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) config (instance
        independent) index for each Object. Each objects having
        the same configuration share the same config index.
" 
    ::= { cbQosObjectsEntry 2 }

cbQosObjectsType OBJECT-TYPE
    SYNTAX          QosObjectType
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The type of the QoS object.
"
    ::= { cbQosObjectsEntry 3 }

cbQosParentObjectsIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The parent instance index of a QoS object.

        For a ClassMap, the parent index would be the index of 
        the attached PolicyMap.

        For a Match Statement, the parent index would be the 
        index of the ClassMap that uses this Match Statement.

        For an action, the parent index would be the 
        index of the ClassMap that applies such Action.

        For a non-hierarchical PolicyMap, the parent would be 
        the logical interface to which the policy is attached,
        thus the parent index would be 0.

        For a hierarchical PolicyMap, the parent index would 
        be the index of the ClassMap to which the nested 
        policy is attached.
" 
    ::= { cbQosObjectsEntry 4 }
 

-- end of cbQosObjectsTable
--   

--   

-- Start of cbQosPolicyMapCfgTable

cbQosPolicyMapCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosPolicyMapCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Policymap configuration information
"
    ::= { cbQosPolicyMapCfg 1 }

cbQosPolicyMapCfgEntry OBJECT-TYPE
    SYNTAX          CbQosPolicyMapCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a policymap. The information includes: Name, and it's
        description. This table contains configuration information 
        only, no statistics associated with it. Therefore, it is 
        indexed by the cbQosConfigIndex of each PolicyMap.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosPolicyMapCfgTable 1 }

CbQosPolicyMapCfgEntry ::= SEQUENCE {
        cbQosPolicyMapName DisplayString,
        cbQosPolicyMapDesc DisplayString
}

cbQosPolicyMapName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Name of the Policymap.
"
    ::= { cbQosPolicyMapCfgEntry 1 }

cbQosPolicyMapDesc OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Description of the PolicyMap.
"
    ::= { cbQosPolicyMapCfgEntry 2 }
 

-- Start of cbQosPolicyMapCfgTable
--   

--   

-- Start of cbQosCMCfg Group

cbQosCMCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosCMCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies ClassMap configuration information
"
    ::= { cbQosClassMapCfg 1 }

cbQosCMCfgEntry OBJECT-TYPE
    SYNTAX          CbQosCMCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a classmap. The information includes: Name, and it's
        description and whether it is a Match-All or Match-Any
        class. This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex of each ClassMap.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosCMCfgTable 1 }

CbQosCMCfgEntry ::= SEQUENCE {
        cbQosCMName DisplayString,
        cbQosCMDesc DisplayString,
        cbQosCMInfo QosClassInfo
}

cbQosCMName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Name of the Classmap.
"
    ::= { cbQosCMCfgEntry 1 }

cbQosCMDesc OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Description of the Classmap.
"
    ::= { cbQosCMCfgEntry 2 }

cbQosCMInfo OBJECT-TYPE
    SYNTAX          QosClassInfo
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Match all vs Match any in a given class.
"
    ::= { cbQosCMCfgEntry 3 }
 

-- End of cbQosCMCfg Group
--   

--   

-- Start of cbQosMatchStmtCfgTable

cbQosMatchStmtCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosMatchStmtCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies ClassMap configuration information
"
    ::= { cbQosMatchStmtCfg 1 }

cbQosMatchStmtCfgEntry OBJECT-TYPE
    SYNTAX          CbQosMatchStmtCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a MatchStatement. The information includes: Name, 
        and whether it is a Match or Match-Not
        statement. This table contains configuration information 
        only, no statistics associated with it. Therefore, it is 
        indexed by the cbQosConfigIndex of each MatchStatement.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosMatchStmtCfgTable 1 }

CbQosMatchStmtCfgEntry ::= SEQUENCE {
        cbQosMatchStmtName DisplayString,
        cbQosMatchStmtInfo QosMatchInfo
}

cbQosMatchStmtName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..255))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Name of the Match Statement.
"
    ::= { cbQosMatchStmtCfgEntry 1 }

cbQosMatchStmtInfo OBJECT-TYPE
    SYNTAX          QosMatchInfo
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Match vs Match Not in a given class.
"
    ::= { cbQosMatchStmtCfgEntry 2 }
 

-- End of cbQosMatchStmtCfgTable
--   

--   

-- Start of cbQosQueueingCfgTable

cbQosQueueingCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosQueueingCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Queueing Action configuration
        information
"
    ::= { cbQosQueueingCfg 1 }

cbQosQueueingCfgEntry OBJECT-TYPE
    SYNTAX          CbQosQueueingCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about a queueing action. The information 
        includes: Bandwidth, Units, Flow Enabled, Priority Enabled, 
        and Q size.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex of each Queueing Action.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosQueueingCfgTable 1 }

CbQosQueueingCfgEntry ::= SEQUENCE {
        cbQosQueueingCfgBandwidth       Integer32,
        cbQosQueueingCfgBandwidthUnits  QueueingBandwidthUnits,
        cbQosQueueingCfgFlowEnabled     TruthValue,
        cbQosQueueingCfgPriorityEnabled TruthValue,
        cbQosQueueingCfgAggregateQSize  Integer32,
        cbQosQueueingCfgIndividualQSize Integer32,
        cbQosQueueingCfgDynamicQNumber  Integer32,
        cbQosQueueingCfgPrioBurstSize   Unsigned32,
        cbQosQueueingCfgQLimitUnits     CbQosQueueUnitType,
        cbQosQueueingCfgAggregateQLimit CbQosQueueDepth,
        cbQosQueueingCfgAggrQLimitTime  Unsigned32,
        cbQosQueueingCfgPriorityLevel   Unsigned32
}

cbQosQueueingCfgBandwidth OBJECT-TYPE
    SYNTAX          Integer32 (0..2000000)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The type of bandwidth configuration value represented by this
        object is indicated by the value of
        cbQosQueueingCfgBandwidthUnits for this entry. 

        If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or 
        'percentage(2)', this object represents the configured  
        bandwidth allocated to this traffic class.In the case of a  
        bandwidth policy, this value represents a minimum bandwidth  
        guarantee for the traffic class. In the case of a priority  
        policy, this value represents the maximum rate at which  
        priority service is guaranteed. 

        If the cbQosQueueingCfgBandwidthUnits value is  
        'percentageRemaining(3)', this object represents the  
        the percentage of the unallocated bandwidth to allocate to 
        this class.  If the cbQosQueueingCfgBandwidthUnits value is  
        'ratioRemaining(4)', this object represents the ratio value, 
        relative to other class' configured ratio values, used to  
        determine the portion of the unallocated bandwidth to apply to 
        this class.
" 
    ::= { cbQosQueueingCfgEntry 1 }

cbQosQueueingCfgBandwidthUnits OBJECT-TYPE
    SYNTAX          QueueingBandwidthUnits
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Units of the accompanying cbQosQueueingCfgbandwidth
        parameter
" 
    ::= { cbQosQueueingCfgEntry 2 }

cbQosQueueingCfgFlowEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Boolean to indicate if flow-based fair-queue is
        enabled for this class.
" 
    ::= { cbQosQueueingCfgEntry 3 }

cbQosQueueingCfgPriorityEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Boolean to indicate if low latency queueing
        (priority) is enabled for this class.
" 
    ::= { cbQosQueueingCfgEntry 4 }

cbQosQueueingCfgAggregateQSize OBJECT-TYPE
    SYNTAX          Integer32 (0..65535)
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Maximum number of packets that can be held in all the
        individual queues associated with this class
        before packets are dropped. This object is deprecated
        by cbQosQueueingCfgAggregateQLimit.
" 
    ::= { cbQosQueueingCfgEntry 5 }

cbQosQueueingCfgIndividualQSize OBJECT-TYPE
    SYNTAX          Integer32 (1..32768)
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Maximum number of packets that can be held in an
        individual Flow-based fair-queue associated with this 
        class before it drops packets (once the AggregateQSize
        has been reached).

        This field only makes sense in the context of 
        Flow-based fair-queueing.
" 
    ::= { cbQosQueueingCfgEntry 6 }

cbQosQueueingCfgDynamicQNumber OBJECT-TYPE
    SYNTAX          Integer32 (1..32768)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Number of dynamic queues supported when
        flow-based fair-queue is in use.
" 
    ::= { cbQosQueueingCfgEntry 7 }

cbQosQueueingCfgPrioBurstSize OBJECT-TYPE
    SYNTAX          Unsigned32 (32..64000000)
    UNITS           "Bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "In the priority queue, this is the number of bytes
        allowed in a single burst. 
        This parameter only makes sense if Priority is enabled
" 
    ::= { cbQosQueueingCfgEntry 8 }

cbQosQueueingCfgQLimitUnits OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Represents the unit type of
        cbQosQueueingCfgAggregateQLimit object.
" 
    ::= { cbQosQueueingCfgEntry 9 }

cbQosQueueingCfgAggregateQLimit OBJECT-TYPE
    SYNTAX          CbQosQueueDepth
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Maximum allowed queue size for all the individual
        queues associated with this class. When the queue size
        exceed this value, the packets will be dropped.
" 
    ::= { cbQosQueueingCfgEntry 10 }

cbQosQueueingCfgAggrQLimitTime OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Maximum allowed queue size in milli-seconds for all
        individual queues associated with this class.  It
        is internally converted to bytes by using the
        bandwidth that is available for the class.
" 
    ::= { cbQosQueueingCfgEntry 11 }

cbQosQueueingCfgPriorityLevel OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The priority level of the queue into which packets matching
        this  class are queued into. A larger priority level indicates
        higher  priority.
" 
    ::= { cbQosQueueingCfgEntry 12 }
 

-- End of cbQosQueueingCfg Group
--   

--   
-- The cbQosREDCfg group
--   
-- cbQosREDTable

cbQosREDCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosREDCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies WRED Action configuration
        information
"
    ::= { cbQosREDCfg 1 }

cbQosREDCfgEntry OBJECT-TYPE
    SYNTAX          CbQosREDCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about a WRED Action.  The table holds global 
        (per traffic class) configuration like: Expon Weight
        and Mean Q size.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex of each WRED Action.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosREDCfgTable 1 }

CbQosREDCfgEntry ::= SEQUENCE {
        cbQosREDCfgExponWeight Integer32,
        cbQosREDCfgMeanQsize   Integer32,
        cbQosREDCfgDscpPrec    REDMechanism,
        cbQosREDCfgECNEnabled  TruthValue
}

cbQosREDCfgExponWeight OBJECT-TYPE
    SYNTAX          Integer32 (1..16)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The decay factor for the queue average calculation.
        The decay factor is equal to raising 2 to the power 
        of N, where N could be up to 16. 
        The smaller the number, the faster it decays.
" 
    ::= { cbQosREDCfgEntry 1 }

cbQosREDCfgMeanQsize OBJECT-TYPE
    SYNTAX          Integer32 (0..65535)
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "The average queue size, computed and used by the WRED
        algorithm. This is deprecated by cbQosREDMeanQsize.
" 
    ::= { cbQosREDCfgEntry 2 }

cbQosREDCfgDscpPrec OBJECT-TYPE
    SYNTAX          REDMechanism
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The Classification mechanism used by RED
"
    ::= { cbQosREDCfgEntry 3 }

cbQosREDCfgECNEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Boolean to indicate if explicit congestion notification
        enabled for this class.
" 
    ::= { cbQosREDCfgEntry 4 }
 

-- end of cbQosREDCfgTable
--   

--   

-- cbQosREDClassCfg Group

cbQosREDClassCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosREDClassCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies WRED Action configuration
        information on a per IP precedence basis.
"
    ::= { cbQosREDClassCfg 1 }

cbQosREDClassCfgEntry OBJECT-TYPE
    SYNTAX          CbQosREDClassCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a WRED Action.  The table holds the per IP precedence
        based WRED configuration parameters. 

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex and cbQosREDValue 
        of each WRED Action.
"
    INDEX           {
                        cbQosConfigIndex,
                        cbQosREDValue
                    } 
    ::= { cbQosREDClassCfgTable 1 }

CbQosREDClassCfgEntry ::= SEQUENCE {
        cbQosREDValue                    Integer32,
        cbQosREDCfgMinThreshold          Integer32,
        cbQosREDCfgMaxThreshold          Integer32,
        cbQosREDCfgPktDropProb           Integer32,
        cbQosREDClassCfgThresholdUnit    CbQosQueueUnitType,
        cbQosREDClassCfgMinThreshold     CbQosQueueDepth,
        cbQosREDClassCfgMaxThreshold     CbQosQueueDepth,
        cbQosREDClassCfgMinThresholdTime Unsigned32,
        cbQosREDClassCfgMaxThresholdTime Unsigned32,
        cbQosREDClassCfgMaxThresholdUnit CbQosQueueUnitType,
        cbQosREDClassCfgMinThresholdUnit CbQosQueueUnitType
}

cbQosREDValue OBJECT-TYPE
    SYNTAX          Integer32 (0..63)
    MAX-ACCESS      not-accessible
    STATUS          current
   DESCRIPTION        "The IP precedence or IP DSCP of this entry.
"
    ::= { cbQosREDClassCfgEntry 1 }

cbQosREDCfgMinThreshold OBJECT-TYPE
    SYNTAX          Integer32 (1..32768)
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Minimum threshold in number of packets. When the
        average queue length reaches this number, WRED begins 
        to drop packets with the specified IP precedence.
        This is deprecated by cbQosREDClassCfgMinThreshold.
" 
    ::= { cbQosREDClassCfgEntry 2 }

cbQosREDCfgMaxThreshold OBJECT-TYPE
    SYNTAX          Integer32 (1..32768)
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Maximum threshold in number of packets. When the
        average queue length exceeds this number, WRED drops 
        all packets with the specified IP precedence.
        This is deprecated by cbQosREDClassCfgMaxThreshold.
" 
    ::= { cbQosREDClassCfgEntry 3 }

cbQosREDCfgPktDropProb OBJECT-TYPE
    SYNTAX          Integer32 (1..65536)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Denominator for the fraction of packets dropped when
        the average queue depth is MaxDepthThreshold. For 
        example, if the denominator is 10, one out of every 10
        packets is dropped when the average queue is at the 
        MaxDepthThreshold.
" 
    ::= { cbQosREDClassCfgEntry 4 }

cbQosREDClassCfgThresholdUnit OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Represents the unit type to measure the RED thresholds.
        The objects covered are cbQosREDClassCfgMinThreshold
        and cbQosREDClassCfgMaxThreshold
" 
    ::= { cbQosREDClassCfgEntry 5 }

cbQosREDClassCfgMinThreshold OBJECT-TYPE
    SYNTAX          CbQosQueueDepth
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The minimum WRED threshold value. When the average
        queue length reaches this number, WRED begins to 
        drop packets according to REDMechanism specificed
        in cbQosREDCfgDscpPrec.
" 
    ::= { cbQosREDClassCfgEntry 6 }

cbQosREDClassCfgMaxThreshold OBJECT-TYPE
    SYNTAX          CbQosQueueDepth
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The maximum WRED threshold value. When the average
        queue length exceeds this number, WRED drops all 
        packets according to REDMechanism specificed
        in cbQosREDCfgDscpPrec.
" 
    ::= { cbQosREDClassCfgEntry 7 }

cbQosREDClassCfgMinThresholdTime OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The minimum WRED threshold value specified in
        milli-seconds.  The milli-second value is internally
        converted to bytes by using the bandwidth that
        is available for the class.
" 
    ::= { cbQosREDClassCfgEntry 8 }

cbQosREDClassCfgMaxThresholdTime OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The maximum WRED threshold value specified in
        milli-seconds.  The milli-second value is internally
        converted to bytes by using the bandwidth that
        is available for the class.
" 
    ::= { cbQosREDClassCfgEntry 9 }

cbQosREDClassCfgMaxThresholdUnit OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Represents the unit type to measure the RED Maximum thresholds.
        The objects covered is cbQosREDClassCfgMaxThreshold
" 
    ::= { cbQosREDClassCfgEntry 10 }

cbQosREDClassCfgMinThresholdUnit OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Represents the unit type to measure the RED Minimum thresholds.
        The objects covered is cbQosREDClassCfgMinThreshold
" 
    ::= { cbQosREDClassCfgEntry 11 }
 

-- end of cbQosREDClassCfg Group
--   

--   
-- Start of cbQosPoliceCfg Group

cbQosPoliceCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosPoliceCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Police Action configuration
        information.
"
    ::= { cbQosPoliceCfg 1 }

cbQosPoliceCfgEntry OBJECT-TYPE
    SYNTAX          CbQosPoliceCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a Police Action.  The table holds Policy 
        configuration parameters, such as rate, burst size, and 
        actions based on traffic rates.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosPoliceCfgTable 1 }

CbQosPoliceCfgEntry ::= SEQUENCE {
        cbQosPoliceCfgRate             Unsigned32,
        cbQosPoliceCfgBurstSize        Unsigned32,
        cbQosPoliceCfgExtBurstSize     Unsigned32,
        cbQosPoliceCfgConformAction    PoliceAction,
        cbQosPoliceCfgConformSetValue  Unsigned32,
        cbQosPoliceCfgExceedAction     PoliceAction,
        cbQosPoliceCfgExceedSetValue   Unsigned32,
        cbQosPoliceCfgViolateAction    PoliceAction,
        cbQosPoliceCfgViolateSetValue  Unsigned32,
        cbQosPoliceCfgPir              Unsigned32,
        cbQosPoliceCfgRate64           Unsigned64,
        cbQosPoliceCfgRateType         CbQosRateType,
        cbQosPoliceCfgPercentRateValue Unsigned32,
        cbQosPoliceCfgPercentPirValue  Unsigned32,
        cbQosPoliceCfgCellRate         Unsigned32,
        cbQosPoliceCfgCellPir          Unsigned32,
        cbQosPoliceCfgBurstCell        Unsigned32,
        cbQosPoliceCfgExtBurstCell     Unsigned32,
        cbQosPoliceCfgBurstTime        Unsigned32,
        cbQosPoliceCfgExtBurstTime     Unsigned32,
        cbQosPoliceCfgCdvt             Unsigned32,
        cbQosPoliceCfgConformColor     DisplayString,
        cbQosPoliceCfgExceedColor      DisplayString,
        cbQosPoliceCfgConditional      TruthValue
}

cbQosPoliceCfgRate OBJECT-TYPE
    SYNTAX          Unsigned32 (8000..2000000000)
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed policing rate. This is the sustained
        rate permitted by policing.

        If a committed policing rate greater than 2000000000
        is configurable on the system, then the configured
        rate is available in cbQosPoliceCfgRate64.
" 
    ::= { cbQosPoliceCfgEntry 1 }

cbQosPoliceCfgBurstSize OBJECT-TYPE
    SYNTAX          Unsigned32 (1000..512000000)
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in bytes, in excess of the
        committed policing rate that will be permitted by 
        the policing feature.
" 
    ::= { cbQosPoliceCfgEntry 2 }

cbQosPoliceCfgExtBurstSize OBJECT-TYPE
    SYNTAX          Unsigned32 (1000..512000000)
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in bytes, in excess of the
        burst limit, which may be conditionally permitted 
        by the policing feature. The probability that the 
        traffic is not permitted increases as the received 
        burst size increases.
" 
    ::= { cbQosPoliceCfgEntry 3 }

cbQosPoliceCfgConformAction OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Action to be taken when the traffic is within the
        configured rate, that is, the traffic rate is 
        conforming.
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 4 }

cbQosPoliceCfgConformSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (1..99)
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "New packet attribute values for each packets that
        conforms to the configured Police rate.
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 5 }

cbQosPoliceCfgExceedAction OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Action to be taken when the traffic exceeds the
        configured rate, that is, the traffic is 
        non-conforming.
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 6 }

cbQosPoliceCfgExceedSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (1..99)
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "New packet attribute values for each packets that
        conforms to the configured Police rate.
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 7 }

cbQosPoliceCfgViolateAction OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "Action to be taken when the traffic exceeds the
        conform and exceed token buckets.
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 8 }

cbQosPoliceCfgViolateSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (1..99)
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION        "New packet attribute values for each packets that
        conforms to the Police violate action. The packet
        attibute values depend on the action that is taken
        for the particular packet. For example, if the 
        action was to set the dscp value, this entry describes
        the value it is set to. 
        This object is deprecated and defined in 
        cbQosPoliceActionCfgTable.
" 
    ::= { cbQosPoliceCfgEntry 9 }

cbQosPoliceCfgPir OBJECT-TYPE
    SYNTAX          Unsigned32 (8000..2000000000)
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed policing rate. This is the peak
        rate permitted by two rate policing.
" 
    ::= { cbQosPoliceCfgEntry 10 }

cbQosPoliceCfgRate64 OBJECT-TYPE
    SYNTAX          Unsigned64
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed policing rate. This is the sustained
        rate permitted by policing.
" 
    ::= { cbQosPoliceCfgEntry 11 }

cbQosPoliceCfgRateType OBJECT-TYPE
    SYNTAX          CbQosRateType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The rate type that configured for CIR & PIR.
        1 means rates are configured in bps.
        2 means rates are configured in percentage.
        3 means rates are configured in cps.
" 
    ::= { cbQosPoliceCfgEntry 12 }

cbQosPoliceCfgPercentRateValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..100)
    UNITS           "% of Interface Bandwidth"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed policing rate in percentage.  Its value
        is valid only when cbQosPoliceCfgRateType equals to 2.
" 
    ::= { cbQosPoliceCfgEntry 13 }

cbQosPoliceCfgPercentPirValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..100)
    UNITS           "% of Interface Bandwidth"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The peak policing rate in percentage. Its value is
        valid only when cbQosPoliceCfgRateType equals to 2.
" 
    ::= { cbQosPoliceCfgEntry 14 }

cbQosPoliceCfgCellRate OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "cells/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed policing rate in cells/second.  Its value
        is valid only when cbQosPoliceCfgRateType equals to 3.
" 
    ::= { cbQosPoliceCfgEntry 15 }

cbQosPoliceCfgCellPir OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "cells/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The peak policing rate in cells/second.  Its value is
        valid only when cbQosPoliceCfgRateType equals to 3.
" 
    ::= { cbQosPoliceCfgEntry 16 }

cbQosPoliceCfgBurstCell OBJECT-TYPE
    SYNTAX          Unsigned32 (0..9660377)
    UNITS           "Cells"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in cells, in excess of the
        committed policing rate that will be permitted by
        the policing feature.
" 
    ::= { cbQosPoliceCfgEntry 17 }

cbQosPoliceCfgExtBurstCell OBJECT-TYPE
    SYNTAX          Unsigned32 (0..9660377)
    UNITS           "Cells"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in cells, in excess of the
        burst limit, which may be conditionally permitted
        by the policing feature. The probability that the
        traffic is not permitted increases as the received
        burst size increases.
" 
    ::= { cbQosPoliceCfgEntry 18 }

cbQosPoliceCfgBurstTime OBJECT-TYPE
    SYNTAX          Unsigned32 (0..2000)
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic time, in ms, in excess of the
        committed policing rate that will be permitted by
        the policing feature.  The milli-second value is
        internally converted to bytes by using the bandwidth
        that is available for the class.
" 
    ::= { cbQosPoliceCfgEntry 19 }

cbQosPoliceCfgExtBurstTime OBJECT-TYPE
    SYNTAX          Unsigned32 (0..2000)
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic time, in ms, in excess of the
        burst limit, which may be conditionally permitted
        by the policing feature. The probability that the
        traffic is not permitted increases as the received
        burst size increases.  The milli-second value is 
        internally converted to bytes by using the bandwidth
        that is available for the class.
" 
    ::= { cbQosPoliceCfgEntry 20 }

cbQosPoliceCfgCdvt OBJECT-TYPE
    SYNTAX          Unsigned32 (0..1000000)
    UNITS           "micro-second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The ATM Cell Delay Variation Tolerance value.
"
    ::= { cbQosPoliceCfgEntry 21 }

cbQosPoliceCfgConformColor OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The Classmap name used in AF color-aware mode to
        specify the conform-color for the incoming packets
        which was marked by the previous node.

        At least conform-color must be specified.  If only 
        conform-color is specified, all other packets are
        assumed to be marked exceed.

        See RFC 2697, A Single Rate Three Color Marker.
        See RFC 2698, A Two Rate Three Color Marker.
" 
    ::= { cbQosPoliceCfgEntry 22 }

cbQosPoliceCfgExceedColor OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The Classmap name used in AF color-aware mode to
        specify the exceed-color for the incoming packets
        which was marked by the previous node.

        If both conform-color and exceed-color are specified,
        all other packets are assumed to be marked violate.
        Violate-color configuration is not needed.
" 
    ::= { cbQosPoliceCfgEntry 23 }

cbQosPoliceCfgConditional OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object is use to depict weather police is configured
        as a conditioniler policer or not
" 
    ::= { cbQosPoliceCfgEntry 24 }
 

-- end of cbQosPoliceCfg Group
--   

--   
-- Start of cbQosPoliceActionCfg Group

cbQosPoliceActionCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosPoliceActionCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Police Action configuration
        information.
"
    ::= { cbQosPoliceActionCfg 1 }

cbQosPoliceActionCfgEntry OBJECT-TYPE
    SYNTAX          CbQosPoliceActionCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about Actions for one Police.  The table holds Police 
        action specific configuration parameters.
        This table is a sub-table for cbQosPoliceCfgTable. There is
        a 1-to-1 association between one entry here and one entry in 
        cbQosPoliceCfgTable. 
        This table contains configuration information only,
        no statistics associated with it. 
        This table has two indices. The first is cbQosConfigIndex 
        which is drived directly from cbQosPoliceCfgTable to keep the
        1-to-1 mapping nature between two tables. 
        The second is cbQosPoliceActionCfgIndex used to reference 
        the actual actions configured. The maximum number of actions
        supported is determined by the system, which is 5 currently.
"
    INDEX           {
                        cbQosConfigIndex,
                        cbQosPoliceActionCfgIndex
                    } 
    ::= { cbQosPoliceActionCfgTable 1 }

CbQosPoliceActionCfgEntry ::= SEQUENCE {
        cbQosPoliceActionCfgIndex           Unsigned32,
        cbQosPoliceActionCfgConform         PoliceAction,
        cbQosPoliceActionCfgConformSetValue Unsigned32,
        cbQosPoliceActionCfgExceed          PoliceAction,
        cbQosPoliceActionCfgExceedSetValue  Unsigned32,
        cbQosPoliceActionCfgViolate         PoliceAction,
        cbQosPoliceActionCfgViolateSetValue Unsigned32
}

cbQosPoliceActionCfgIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "An arbitrary (system-assigned) index for police
        actions that are defined by a police configuration.
" 
    ::= { cbQosPoliceActionCfgEntry 1 }

cbQosPoliceActionCfgConform OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Action to be taken when the traffic exceeds the
        conform and exceed token buckets.
" 
    ::= { cbQosPoliceActionCfgEntry 2 }

cbQosPoliceActionCfgConformSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "New packet attribute values for each packet set by
        police action defined in cbQosPoliceActionCfgConform.
        This object will be set to zero if the corresponding
        police action does not require a set value, such as 
        no action, drop action or transmit action.
" 
    ::= { cbQosPoliceActionCfgEntry 3 }

cbQosPoliceActionCfgExceed OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Action to be taken when the traffic exceeds the
        conform and exceed token buckets.
" 
    ::= { cbQosPoliceActionCfgEntry 4 }

cbQosPoliceActionCfgExceedSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "New packet attribute values for each packet set by
        police action defined in cbQosPoliceActionCfgExceed.
        This object will be set to zero if the corresponding
        police action does not require a set value, such as 
        no action, drop action or transmit action.
" 
    ::= { cbQosPoliceActionCfgEntry 5 }

cbQosPoliceActionCfgViolate OBJECT-TYPE
    SYNTAX          PoliceAction
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Action to be taken when the traffic exceeds the
        conform and exceed token buckets.
" 
    ::= { cbQosPoliceActionCfgEntry 6 }

cbQosPoliceActionCfgViolateSetValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "New packet attribute values for each packet set by
        police action defined in cbQosPoliceActionCfgViolate.
        This object will be set to zero if the corresponding
        police action does not require a set value, such as 
        no action, drop action or transmit action.
" 
    ::= { cbQosPoliceActionCfgEntry 7 }
 

-- end of cbQosPoliceActionCfg Group
--   

--   
-- The cbQosTSCfg group
--   
-- cbQosTSCfgTable

cbQosTSCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosTSCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies traffic-shaping Action configuration
        information.
"
    ::= { cbQosTSCfg 1 }

cbQosTSCfgEntry OBJECT-TYPE
    SYNTAX          CbQosTSCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a traffic-shaping Action.  The table holds Traffic
        Shaping configuration parameters, such as rate, burst size, 
        and Shaping types.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosTSCfgTable 1 }

CbQosTSCfgEntry ::= SEQUENCE {
        cbQosTSCfgRate             Integer32,
        cbQosTSCfgBurstSize        Integer32,
        cbQosTSCfgExtBurstSize     Integer32,
        cbQosTSCfgAdaptiveEnabled  TruthValue,
        cbQosTSCfgAdaptiveRate     Integer32,
        cbQosTSCfgLimitType        TrafficShapingLimit,
        cbQosTSCfgRateType         CbQosRateType,
        cbQosTSCfgPercentRateValue Unsigned32,
        cbQosTSCfgBurstTime        Unsigned32,
        cbQosTSCfgExtBurstTime     Unsigned32,
        cbQosTSCfgRate64           Unsigned64
}

cbQosTSCfgRate OBJECT-TYPE
    SYNTAX          Integer32 (8000..154400000)
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed traffic-shaping rate.  This is the
        sustained rate permitted by the traffic-shaping.
" 
    ::= { cbQosTSCfgEntry 1 }

cbQosTSCfgBurstSize OBJECT-TYPE
    SYNTAX          Integer32 (256..154400000)
    UNITS           "bits"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in bits, in excess of the
        committed traffic-shaping rate that will be
        instantaneously permitted by this feature.
" 
    ::= { cbQosTSCfgEntry 2 }

cbQosTSCfgExtBurstSize OBJECT-TYPE
    SYNTAX          Integer32 (0..154400000)
    UNITS           "bits"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in bits, in excess of the
        burst limit, which may be conditionally permitted
        by traffic-shaping feature.
" 
    ::= { cbQosTSCfgEntry 3 }

cbQosTSCfgAdaptiveEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates is adaptive traffic-shaping
        has been enabled.
" 
    ::= { cbQosTSCfgEntry 4 }

cbQosTSCfgAdaptiveRate OBJECT-TYPE
    SYNTAX          Integer32 (8000..154400000)
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the current adaptive traffic
        shaping rate.
" 
    ::= { cbQosTSCfgEntry 5 }

cbQosTSCfgLimitType OBJECT-TYPE
    SYNTAX          TrafficShapingLimit
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates if traffic-shaping is limiting
        traffic based on the peak rate or the average rate.
" 
    ::= { cbQosTSCfgEntry 6 }

cbQosTSCfgRateType OBJECT-TYPE
    SYNTAX          CbQosRateType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The rate type that configured for traffic-shaping.
        1 means rate is configured in bps.
        2 means rate is configured in percentage.
" 
    ::= { cbQosTSCfgEntry 7 }

cbQosTSCfgPercentRateValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..100)
    UNITS           "% of Interface Bandwidth"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed traffic-shaping rate in percentage.
        Its value is valid only when cbQosTSCfgRateType 
        equals to 2.
" 
    ::= { cbQosTSCfgEntry 8 }

cbQosTSCfgBurstTime OBJECT-TYPE
    SYNTAX          Unsigned32 (0..2000)
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in ms, in excess of the
        committed traffic-shaping rate that will be
        instantaneously permitted by this feature.
        The milli-second value is internally converted to
        bits by using the bandwidth that is available for
        the class.
" 
    ::= { cbQosTSCfgEntry 9 }

cbQosTSCfgExtBurstTime OBJECT-TYPE
    SYNTAX          Unsigned32 (0..2000)
    UNITS           "milli-seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The amount of traffic, in ms, in excess of the
        burst limit, which may be conditionnally permitted
        by traffic-shaping feature.
        The milli-second value is internally converted to
        bits by using the bandwidth that is available for
        the class.
" 
    ::= { cbQosTSCfgEntry 10 }

cbQosTSCfgRate64 OBJECT-TYPE
    SYNTAX          Unsigned64
    UNITS           "bits/second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The committed shape rate. This is the sustained
        rate permitted by shaping. This object represents 
        the 64 bit value of object cbQosTSCfgRate
" 
    ::= { cbQosTSCfgEntry 11 }
 

-- end of cbQosTSCfgTable
--   
-- The cbQosSetCfgObject group
--   
-- cbQosSetCfg

cbQosSetCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosSetCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Packet Marking Action configuration
        information.
"
    ::= { cbQosSetCfg 1 }

cbQosSetCfgEntry OBJECT-TYPE
    SYNTAX          CbQosSetCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration information
        about a Packet Marking Action.  The table holds Packet
        Marking configuration parameters, such as type of packet
        marking and values being set to.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosSetCfgTable 1 }

CbQosSetCfgEntry ::= SEQUENCE {
        cbQosSetCfgFeature             SetFeatureType,
        cbQosSetCfgIpDSCPValue         Integer32,
        cbQosSetCfgIpPrecedenceValue   Integer32,
        cbQosSetCfgQosGroupValue       Integer32,
        cbQosSetCfgL2CosValue          Integer32,
        cbQosSetCfgMplsExpValue        Unsigned32,
        cbQosSetCfgDiscardClassValue   Unsigned32,
        cbQosSetCfgMplsExpTopMostValue Unsigned32,
        cbQosSetCfgSrpPriority         Unsigned32,
        cbQosSetCfgFrFecnBecn          Unsigned32,
        cbQosSetCfgL2CosInnerValue     Integer32,
        cbQosSetCfgFrDe                TruthValue
}

cbQosSetCfgFeature OBJECT-TYPE
    SYNTAX          SetFeatureType
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The bit-wise position of each packet marking feature.
"
    ::= { cbQosSetCfgEntry 1 }

cbQosSetCfgIpDSCPValue OBJECT-TYPE
    SYNTAX          Integer32 (0..63)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The IP DSCP value at which the packet is being set
        by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 2 }

cbQosSetCfgIpPrecedenceValue OBJECT-TYPE
    SYNTAX          Integer32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The IP precedence value at which the packet is being
        set by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 3 }

cbQosSetCfgQosGroupValue OBJECT-TYPE
    SYNTAX          Integer32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The QoS Group number at which the packet is being
        set by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 4 }

cbQosSetCfgL2CosValue OBJECT-TYPE
    SYNTAX          Integer32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The Layer 2 Cos value at which the packet is being
        set by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 5 }

cbQosSetCfgMplsExpValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The MPLS experimental value at which the packet
        is being set by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 6 }

cbQosSetCfgDiscardClassValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The Discard Class value at which the packet
        is being set by the packet marking feature.
" 
    ::= { cbQosSetCfgEntry 7 }

cbQosSetCfgMplsExpTopMostValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The MPLS experimental value on the topmost label
        at which the packet is being set by the packet marking
        feature.
" 
    ::= { cbQosSetCfgEntry 8 }

cbQosSetCfgSrpPriority OBJECT-TYPE
    SYNTAX          Unsigned32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The SRP Priority value at which the packet is being set
        by the packet marking feature.  The higher the value the
        higher the priority.  SRP is a Cisco developed protocol.
        RFC 2892: The Cisco SRP MAC Layer Protocol.
" 
    ::= { cbQosSetCfgEntry 9 }

cbQosSetCfgFrFecnBecn OBJECT-TYPE
    SYNTAX          Unsigned32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This is a configurable parameter in percentage of the
        queue size.  When the current queue size out of the
        queue limit is greater than this parameter, both 
        Frame Relay FECN and BECN bits will be set for
        Frame Relay congestion notification mechanism.
" 
    ::= { cbQosSetCfgEntry 10 }

cbQosSetCfgL2CosInnerValue OBJECT-TYPE
    SYNTAX          Integer32 (0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The value to be set in the 802.1p priority field in the inner
        802.1q VLAN tag (QinQ).  This object is applicable when
        cbQosSetCfgFeature has the 'l2CosInner' bit set.
" 
    ::= { cbQosSetCfgEntry 11 }

cbQosSetCfgFrDe OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The Discard Eligibility (DE) bit is used to indicate that a
        frame has lower importance than other frames. The DE bit is part
        of the Address field in the Frame Relay frame header.
            DTE devices can set the value of the DE bit of a frame to 1
        to indicate that the frame has lower importance than other
        frames. When the network becomes congested, DCE devices will
        discard frames with the DE bit set before discarding those that
        do not. This reduces the likelihood of critical data being
        dropped by Frame Relay DCE devices during periods of
        congestion.
"
    DEFVAL          { false } 
    ::= { cbQosSetCfgEntry 12 }
 

-- end of cbQosSetCfgTable

cbQosCMStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosCMStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies ClassMap related Statistical
        information.
"
    ::= { cbQosClassMapStats 1 }

cbQosCMStatsEntry OBJECT-TYPE
    SYNTAX          CbQosCMStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about ClassMap. ClassMap specific information
        you can find in this table are : pre/post policy pkt/byte
        counts, bit rates, drop pkt/bytes and no buffer drops.

        This table contains statistical information only,
        no configuration information associated with it. Therefore, 
        it is indexed by the instance specific IDs, such as 
        cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosCMStatsTable 1 }

CbQosCMStatsEntry ::= SEQUENCE {
        cbQosCMPrePolicyPktOverflow   Counter32,
        cbQosCMPrePolicyPkt           Counter32,
        cbQosCMPrePolicyPkt64         Counter64,
        cbQosCMPrePolicyByteOverflow  Counter32,
        cbQosCMPrePolicyByte          Counter32,
        cbQosCMPrePolicyByte64        Counter64,
        cbQosCMPrePolicyBitRate       Gauge32,
        cbQosCMPostPolicyByteOverflow Counter32,
        cbQosCMPostPolicyByte         Counter32,
        cbQosCMPostPolicyByte64       Counter64,
        cbQosCMPostPolicyBitRate      Gauge32,
        cbQosCMDropPktOverflow        Counter32,
        cbQosCMDropPkt                Counter32,
        cbQosCMDropPkt64              Counter64,
        cbQosCMDropByteOverflow       Counter32,
        cbQosCMDropByte               Counter32,
        cbQosCMDropByte64             Counter64,
        cbQosCMDropBitRate            Gauge32,
        cbQosCMNoBufDropPktOverflow   Counter32,
        cbQosCMNoBufDropPkt           Counter32,
        cbQosCMNoBufDropPkt64         Counter64
}

cbQosCMPrePolicyPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of inbound packets prior to
        executing any QoS policies.
" 
    ::= { cbQosCMStatsEntry 1 }

cbQosCMPrePolicyPkt OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of inbound packets prior to
        executing any QoS policies.
" 
    ::= { cbQosCMStatsEntry 2 }

cbQosCMPrePolicyPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of inbound packets prior to executing
        any QoS policies.
" 
    ::= { cbQosCMStatsEntry 3 }

cbQosCMPrePolicyByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of inbound octets prior to
        executing any QoS policies.
" 
    ::= { cbQosCMStatsEntry 4 }

cbQosCMPrePolicyByte OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of inbound octets prior to
        executing any QoS policies.
" 
    ::= { cbQosCMStatsEntry 5 }

cbQosCMPrePolicyByte64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of inbound octets prior to executing
        any QoS policies.
" 
    ::= { cbQosCMStatsEntry 6 }

cbQosCMPrePolicyBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The bit rate of the traffic prior to executing any QoS
        policies.
" 
    ::= { cbQosCMStatsEntry 7 }

cbQosCMPostPolicyByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of outbound octets after executing
        QoS policies.
" 
    ::= { cbQosCMStatsEntry 8 }

cbQosCMPostPolicyByte OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of outbound octets after executing
        QoS policies.
" 
    ::= { cbQosCMStatsEntry 9 }

cbQosCMPostPolicyByte64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of outbound octets after executing
        QoS policies.
" 
    ::= { cbQosCMStatsEntry 10 }

cbQosCMPostPolicyBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The bit rate of the traffic after executing QoS
        policies.
" 
    ::= { cbQosCMStatsEntry 11 }

cbQosCMDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits counter of dropped pkts per class
        as the result of all features that can produce drops 
        (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 12 }

cbQosCMDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits counter of dropped pkts per class
        as the result of all features that can produce drops 
        (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 13 }

cbQosCMDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits counter of dropped pkts per class as
        the result of all features that can produce drops 
         (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 14 }

cbQosCMDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits counter of dropped bytes per class
        as the result of all features that can produce drops 
        (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 15 }

cbQosCMDropByte OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits counter of dropped bytes per class
        as the result of all features that can produce drops 
        (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 16 }

cbQosCMDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits counter of dropped bytes per class as the
        result of all features that can produce drops 
         (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 17 }

cbQosCMDropBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The bit rate of the drops per class as the result of
        all features that can produce drops 
        (e.g., police, random detect, etc.).
" 
    ::= { cbQosCMStatsEntry 18 }

cbQosCMNoBufDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits drop packet count which occured
        due to a lack of SRAM buffers during output processing 
        on an interface.
" 
    ::= { cbQosCMStatsEntry 19 }

cbQosCMNoBufDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits drop packet count which occured due
        to a lack of SRAM buffers during output processing on 
        an interface.
" 
    ::= { cbQosCMStatsEntry 20 }

cbQosCMNoBufDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits drop packet count which occured due to a
        lack of SRAM buffers during output processing on an 
        interface.
" 
    ::= { cbQosCMStatsEntry 21 }
 

-- End of cbQosCMStats group
--   

--   
-- QoS Match Statement Object Stats Table

cbQosMatchStmtStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosMatchStmtStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Match Statement related statistical
        information.
"
    ::= { cbQosMatchStmtStats 1 }

cbQosMatchStmtStatsEntry OBJECT-TYPE
    SYNTAX          CbQosMatchStmtStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about Match Statement. Match Statement specific 
        information you can find in this table are : 
        Pre policy pkt/byte counters, and bit rates.

        This table contains statistical information only,
        no configuration information associated with it. Therefore, 
        it is indexed by the instance specific IDs, such as 
        cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosMatchStmtStatsTable 1 }

CbQosMatchStmtStatsEntry ::= SEQUENCE {
        cbQosMatchPrePolicyPktOverflow  Counter32,
        cbQosMatchPrePolicyPkt          Counter32,
        cbQosMatchPrePolicyPkt64        Counter64,
        cbQosMatchPrePolicyByteOverflow Counter32,
        cbQosMatchPrePolicyByte         Counter32,
        cbQosMatchPrePolicyByte64       Counter64,
        cbQosMatchPrePolicyBitRate      Gauge32
}

cbQosMatchPrePolicyPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of inbound packets prior to
        executing any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 1 }

cbQosMatchPrePolicyPkt OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of inbound packets prior to
        executing any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 2 }

cbQosMatchPrePolicyPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of inbound packets prior to executing
        any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 3 }

cbQosMatchPrePolicyByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of inbound octets prior to
        executing any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 4 }

cbQosMatchPrePolicyByte OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of inbound octets prior to
        executing any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 5 }

cbQosMatchPrePolicyByte64 OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of inbound octets prior to executing
        any QoS policies.
" 
    ::= { cbQosMatchStmtStatsEntry 6 }

cbQosMatchPrePolicyBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The bit rate of the traffic prior to executing any QoS
        policies.
" 
    ::= { cbQosMatchStmtStatsEntry 7 }
 

-- The cbQosPoliceStats group
--   
-- cbQosPoliceStatsTable

cbQosPoliceStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosPoliceStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Police Action related Statistical
        information.
"
    ::= { cbQosPoliceStats 1 }

cbQosPoliceStatsEntry OBJECT-TYPE
    SYNTAX          CbQosPoliceStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about Police Action. Police Action specific 
        information you can find in this table are : 
        Conformed/Exceeded pkt/byte counters,  bit rates.

        This table contains statistical information only,
        no configuration information associated with it. 
        Therefore, it is indexed by the instance specific IDs, 
        such as cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosPoliceStatsTable 1 }

CbQosPoliceStatsEntry ::= SEQUENCE {
        cbQosPoliceConformedPktOverflow  Counter32,
        cbQosPoliceConformedPkt          Counter32,
        cbQosPoliceConformedPkt64        Counter64,
        cbQosPoliceConformedByteOverflow Counter32,
        cbQosPoliceConformedByte         Counter32,
        cbQosPoliceConformedByte64       Counter64,
        cbQosPoliceConformedBitRate      Gauge32,
        cbQosPoliceExceededPktOverflow   Counter32,
        cbQosPoliceExceededPkt           Counter32,
        cbQosPoliceExceededPkt64         Counter64,
        cbQosPoliceExceededByteOverflow  Counter32,
        cbQosPoliceExceededByte          Counter32,
        cbQosPoliceExceededByte64        Counter64,
        cbQosPoliceExceededBitRate       Gauge32,
        cbQosPoliceViolatedPktOverflow   Counter32,
        cbQosPoliceViolatedPkt           Counter32,
        cbQosPoliceViolatedPkt64         Counter64,
        cbQosPoliceViolatedByteOverflow  Counter32,
        cbQosPoliceViolatedByte          Counter32,
        cbQosPoliceViolatedByte64        Counter64,
        cbQosPoliceViolatedBitRate       Gauge32
}

cbQosPoliceConformedPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets treated as
        conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 1 }

cbQosPoliceConformedPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets treated as
        conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 2 }

cbQosPoliceConformedPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets treated as conforming
        by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 3 }

cbQosPoliceConformedByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of octets treated as
        conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 4 }

cbQosPoliceConformedByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of octets treated as
        conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 5 }

cbQosPoliceConformedByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of octets treated as conforming
        by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 6 }

cbQosPoliceConformedBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The bit rate of conforming traffic.
"
    ::= { cbQosPoliceStatsEntry 7 }

cbQosPoliceExceededPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 8 }

cbQosPoliceExceededPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 32 bits count of packets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 9 }

cbQosPoliceExceededPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 10 }

cbQosPoliceExceededByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of octets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 11 }

cbQosPoliceExceededByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of octets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 12 }

cbQosPoliceExceededByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of octets treated as
        non-conforming by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 13 }

cbQosPoliceExceededBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The bit rate of the non-conforming traffic.
"
    ::= { cbQosPoliceStatsEntry 14 }

cbQosPoliceViolatedPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 15 }

cbQosPoliceViolatedPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 32 bits count of packets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 16 }

cbQosPoliceViolatedPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 17 }

cbQosPoliceViolatedByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of octets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 18 }

cbQosPoliceViolatedByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of octets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 19 }

cbQosPoliceViolatedByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of octets treated as
        violated by the policing feature.
" 
    ::= { cbQosPoliceStatsEntry 20 }

cbQosPoliceViolatedBitRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "bits per second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The bit rate of the violating traffic.
"
    ::= { cbQosPoliceStatsEntry 21 }
 

-- end of cbQosPoliceStatsTable
--   

--   
-- The cbQosQueueingStats group

cbQosQueueingStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosQueueingStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Queueing Action related Statistical
        information.
"
    ::= { cbQosQueueingStats 1 }

cbQosQueueingStatsEntry OBJECT-TYPE
    SYNTAX          CbQosQueueingStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about queueing action. Queueing action specific 
        information you can find in this table are : 
        various Q depth, and discard pkt/byte counters.

        This table contains statistical information only,
        no configuration information associated with it. 
        Therefore, it is indexed by the instance specific IDs, 
        such as cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosQueueingStatsTable 1 }

CbQosQueueingStatsEntry ::= SEQUENCE {
        cbQosQueueingCurrentQDepth       Gauge32,
        cbQosQueueingMaxQDepth           Gauge32,
        cbQosQueueingDiscardByteOverflow Counter32,
        cbQosQueueingDiscardByte         Counter32,
        cbQosQueueingDiscardByte64       Counter64,
        cbQosQueueingDiscardPktOverflow  Counter32,
        cbQosQueueingDiscardPkt          Counter32,
        cbQosQueueingDiscardPkt64        Counter64
}

cbQosQueueingCurrentQDepth OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The current depth of the queue.
"
    ::= { cbQosQueueingStatsEntry 1 }

cbQosQueueingMaxQDepth OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The maximum depth of the queue.
"
    ::= { cbQosQueueingStatsEntry 2 }

cbQosQueueingDiscardByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bit count of octets, associated with
        this class, that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 3 }

cbQosQueueingDiscardByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of octets, associated with
        this class, that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 4 }

cbQosQueueingDiscardByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The count of octets, associated with this class,
        that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 5 }

cbQosQueueingDiscardPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets, associated with
        this class, that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 6 }

cbQosQueueingDiscardPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of packets, associated with this class,
        that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 7 }

cbQosQueueingDiscardPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of packets, associated with this class,
        that were dropped by queueing.
" 
    ::= { cbQosQueueingStatsEntry 8 }
 

-- end of cbQosQueueingStats Group
--   

-- cbQosTSStats Group

cbQosTSStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosTSStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies traffic-shaping Action related
        Statistical information.
"
    ::= { cbQosTSStats 1 }

cbQosTSStatsEntry OBJECT-TYPE
    SYNTAX          CbQosTSStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about traffic-shaping Action. Traffic-shaping 
        Action specific information you can find in this table are : 
        various delay/drop pkt/byte counters, state of feature,
        and Q size.

        This table contains statistical information only,
        no configuration information associated with it. 
        Therefore, it is indexed by the instance specific IDs, 
        such as cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosTSStatsTable 1 }

CbQosTSStatsEntry ::= SEQUENCE {
        cbQosTSStatsDelayedByteOverflow Counter32,
        cbQosTSStatsDelayedByte         Counter32,
        cbQosTSStatsDelayedByte64       Counter64,
        cbQosTSStatsDelayedPktOverflow  Counter32,
        cbQosTSStatsDelayedPkt          Counter32,
        cbQosTSStatsDelayedPkt64        Counter64,
        cbQosTSStatsDropByteOverflow    Counter32,
        cbQosTSStatsDropByte            Counter32,
        cbQosTSStatsDropByte64          Counter64,
        cbQosTSStatsDropPktOverflow     Counter32,
        cbQosTSStatsDropPkt             Counter32,
        cbQosTSStatsDropPkt64           Counter64,
        cbQosTSStatsActive              TruthValue,
        cbQosTSStatsCurrentQSize        Gauge32
}

cbQosTSStatsDelayedByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the upper 32 bits counter of
        octets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 1 }

cbQosTSStatsDelayedByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the lower 32 bits counter of
        octets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 2 }

cbQosTSStatsDelayedByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the 64 bits counter of
        octets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 3 }

cbQosTSStatsDelayedPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the upper 32 bits counter of
        packets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 4 }

cbQosTSStatsDelayedPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the lower 32 bits counter of
        packets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 5 }

cbQosTSStatsDelayedPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the 64 bits counter of
        packets that have been delayed.
" 
    ::= { cbQosTSStatsEntry 6 }

cbQosTSStatsDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the upper 32 bits counter of
        octets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 7 }

cbQosTSStatsDropByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the lower 32 bits counter of
        octets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 8 }

cbQosTSStatsDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the 64 bits counter of
        octets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 9 }

cbQosTSStatsDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the upper 32 bits counter of
        packets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 10 }

cbQosTSStatsDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the lower 32 bits counter of
        packets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 11 }

cbQosTSStatsDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object represents the 64 bits counter of
        packets that have been dropped during shaping.
" 
    ::= { cbQosTSStatsEntry 12 }

cbQosTSStatsActive OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the current traffic-shaping
        state. When traffic-shaping is enabled and the traffic 
        rate exceeds the shape rate, traffic-shaping
        is considered to be active.  Otherwise, it is 
        considered inactive.
" 
    ::= { cbQosTSStatsEntry 13 }

cbQosTSStatsCurrentQSize OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the current traffic-shaping
        queue depth in packets.
" 
    ::= { cbQosTSStatsEntry 14 }
 

-- end of cbQosTSStats Group
--   

-- cbQosREDClassStats Group

cbQosREDClassStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosREDClassStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies per Precedence WRED Action related
        Statistical information.
"
    ::= { cbQosREDClassStats 1 }

cbQosREDClassStatsEntry OBJECT-TYPE
    SYNTAX          CbQosREDClassStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about per Precedence WRED Action. per Precedence
        WRED Action specific information you can find in this table 
        are : Random pkt/byte counters, and Tail drop pkt/byte 
        counters.

        This table contains per Precedence/dscp based statistical 
        information only, no configuration information associated 
        with it.  Therefore, it is indexed by the instance specific 
        IDs, and a per Precedence identifier: 
        cbQosPolicyIndex, cbQosObjectsIndex and cbQosREDValue.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex,
                        cbQosREDValue
                    } 
    ::= { cbQosREDClassStatsTable 1 }

CbQosREDClassStatsEntry ::= SEQUENCE {
        cbQosREDRandomDropPktOverflow  Counter32,
        cbQosREDRandomDropPkt          Counter32,
        cbQosREDRandomDropPkt64        Counter64,
        cbQosREDRandomDropByteOverflow Counter32,
        cbQosREDRandomDropByte         Counter32,
        cbQosREDRandomDropByte64       Counter64,
        cbQosREDTailDropPktOverflow    Counter32,
        cbQosREDTailDropPkt            Counter32,
        cbQosREDTailDropPkt64          Counter64,
        cbQosREDTailDropByteOverflow   Counter32,
        cbQosREDTailDropByte           Counter32,
        cbQosREDTailDropByte64         Counter64,
        cbQosREDTransmitPktOverflow    Counter32,
        cbQosREDTransmitPkt            Counter32,
        cbQosREDTransmitPkt64          Counter64,
        cbQosREDTransmitByteOverflow   Counter32,
        cbQosREDTransmitByte           Counter32,
        cbQosREDTransmitByte64         Counter64,
        cbQosREDECNMarkPktOverflow     Counter32,
        cbQosREDECNMarkPkt             Counter32,
        cbQosREDECNMarkPkt64           Counter64,
        cbQosREDECNMarkByteOverflow    Counter32,
        cbQosREDECNMarkByte            Counter32,
        cbQosREDECNMarkByte64          Counter64,
        cbQosREDMeanQSizeUnits         CbQosQueueUnitType,
        cbQosREDMeanQSize              CbQosQueueDepth
}

cbQosREDRandomDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 1 }

cbQosREDRandomDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets dropped when
        the number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 2 }

cbQosREDRandomDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets dropped when the number
        of packets in the associated queue was greater 
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 3 }

cbQosREDRandomDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 4 }

cbQosREDRandomDropByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of bytes dropped when
        the number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 5 }

cbQosREDRandomDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes dropped when the number of
        packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 6 }

cbQosREDTailDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 7 }

cbQosREDTailDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 8 }

cbQosREDTailDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets dropped when the number
        of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 9 }

cbQosREDTailDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 10 }

cbQosREDTailDropByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 11 }

cbQosREDTailDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes dropped when the number of
        packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 12 }

cbQosREDTransmitPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The upper 32 bits count of bytes transmitted.
"
    ::= { cbQosREDClassStatsEntry 13 }

cbQosREDTransmitPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The lower 32 bits count of bytes trasmitted.
"
    ::= { cbQosREDClassStatsEntry 14 }

cbQosREDTransmitPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of packets transmitted.
"
    ::= { cbQosREDClassStatsEntry 15 }

cbQosREDTransmitByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The upper 32 bits count of octets transmitted.
"
    ::= { cbQosREDClassStatsEntry 16 }

cbQosREDTransmitByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The lower 32 bits count of octets trasmitted.
"
    ::= { cbQosREDClassStatsEntry 17 }

cbQosREDTransmitByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of octets transmitted.
"
    ::= { cbQosREDClassStatsEntry 18 }

cbQosREDECNMarkPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets ecn marked when the
        number of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 19 }

cbQosREDECNMarkPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets ecn marked when
        the number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 20 }

cbQosREDECNMarkPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets ecn marked when the
        number of packets in the associated queue was 
        greater than the minimum threshold and less than 
        the maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 21 }

cbQosREDECNMarkByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of bytes ecn marked when
        the number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 22 }

cbQosREDECNMarkByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of bytes ecn marked when
        the number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 23 }

cbQosREDECNMarkByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes ecn marked when the
        number of packets in the associated queue was 
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosREDClassStatsEntry 24 }

cbQosREDMeanQSizeUnits OBJECT-TYPE
    SYNTAX          CbQosQueueUnitType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Represents the unit type of cbQosREDMeanQSize
        object.
" 
    ::= { cbQosREDClassStatsEntry 25 }

cbQosREDMeanQSize OBJECT-TYPE
    SYNTAX          CbQosQueueDepth
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The average queue size computed and used by the
        WRED algorithm.
" 
    ::= { cbQosREDClassStatsEntry 26 }
 

-- end of cbQosREDClassStatsTable
--   

-- Start of cbQosIPHCCfgTable

cbQosIPHCCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosIPHCCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies IP Header Compression
        configuration information.
"
    ::= { cbQosIPHCCfg 1 }

cbQosIPHCCfgEntry OBJECT-TYPE
    SYNTAX          CbQosIPHCCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about IP Header compression. This
        includes the compression option of UDP/RTP header,
        TCP header or both.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is
        indexed by cbQosConfigIndex.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosIPHCCfgTable 1 }

CbQosIPHCCfgEntry ::= SEQUENCE {
        cbQosIPHCCfgOption IPHCOption
}

cbQosIPHCCfgOption OBJECT-TYPE
    SYNTAX          IPHCOption
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The configured IP header compression option.
        The value is defined by IPHCOption.
" 
    ::= { cbQosIPHCCfgEntry 1 }
 

-- end of cbQosIPHCCfgTable
--   

-- Start of cbQosIPHCStatsTable

cbQosIPHCStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosIPHCStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies IP Header Compression
        statistical information.
"
    ::= { cbQosIPHCStats 1 }

cbQosIPHCStatsEntry OBJECT-TYPE
    SYNTAX          CbQosIPHCStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes statistical
        information about IP Header compression.

        This table contains statistical information only,
        no configuration information associated with it.
        Therefore, it is indexed by the instance specific IDs,
        namely cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosIPHCStatsTable 1 }

CbQosIPHCStatsEntry ::= SEQUENCE {
        cbQosIPHCRtpSentPktOverflow     Counter32,
        cbQosIPHCRtpSentPkt             Counter32,
        cbQosIPHCRtpSentPkt64           Counter64,
        cbQosIPHCRtpCmprsOutPktOverflow Counter32,
        cbQosIPHCRtpCmprsOutPkt         Counter32,
        cbQosIPHCRtpCmprsOutPkt64       Counter64,
        cbQosIPHCRtpSavedByteOverflow   Counter32,
        cbQosIPHCRtpSavedByte           Counter32,
        cbQosIPHCRtpSavedByte64         Counter64,
        cbQosIPHCRtpSentByteOverflow    Counter32,
        cbQosIPHCRtpSentByte            Counter32,
        cbQosIPHCRtpSentByte64          Counter64,
        cbQosIPHCRtpSentByteRate        Gauge32,
        cbQosIPHCTcpSentPktOverflow     Counter32,
        cbQosIPHCTcpSentPkt             Counter32,
        cbQosIPHCTcpSentPkt64           Counter64,
        cbQosIPHCTcpCmprsOutPktOverflow Counter32,
        cbQosIPHCTcpCmprsOutPkt         Counter32,
        cbQosIPHCTcpCmprsOutPkt64       Counter64,
        cbQosIPHCTcpSavedByteOverflow   Counter32,
        cbQosIPHCTcpSavedByte           Counter32,
        cbQosIPHCTcpSavedByte64         Counter64,
        cbQosIPHCTcpSentByteOverflow    Counter32,
        cbQosIPHCTcpSentByte            Counter32,
        cbQosIPHCTcpSentByte64          Counter64,
        cbQosIPHCTcpSentByteRate        Gauge32
}

cbQosIPHCRtpSentPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The upper 32 bits count of outbound UDP/RTP packets.
"
    ::= { cbQosIPHCStatsEntry 1 }

cbQosIPHCRtpSentPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The lower 32 bits count of outbound UDP/RTP packets.
"
    ::= { cbQosIPHCStatsEntry 2 }

cbQosIPHCRtpSentPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of outbound UDP/RTP packets.
"
    ::= { cbQosIPHCStatsEntry 3 }

cbQosIPHCRtpCmprsOutPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of outbound compressed
        UDP/RTP packets.
" 
    ::= { cbQosIPHCStatsEntry 4 }

cbQosIPHCRtpCmprsOutPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of outbound compressed
        UDP/RTP packets.
" 
    ::= { cbQosIPHCStatsEntry 5 }

cbQosIPHCRtpCmprsOutPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of outbound compressed
        UDP/RTP packets.
" 
    ::= { cbQosIPHCStatsEntry 6 }

cbQosIPHCRtpSavedByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of UDP/RTP bytes that
        saved due to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 7 }

cbQosIPHCRtpSavedByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of UDP/RTP bytes that
        saved due to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 8 }

cbQosIPHCRtpSavedByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of UDP/RTP bytes that saved
        due to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 9 }

cbQosIPHCRtpSentByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of outbound UDP/RTP
        bytes.
" 
    ::= { cbQosIPHCStatsEntry 10 }

cbQosIPHCRtpSentByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of outbound UDP/RTP
        bytes.
" 
    ::= { cbQosIPHCStatsEntry 11 }

cbQosIPHCRtpSentByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of outbound UDP/RTP bytes.
"
    ::= { cbQosIPHCStatsEntry 12 }

cbQosIPHCRtpSentByteRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "Octets per second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 32 bits count of outbound UDP/RTP byte rate.
"
    ::= { cbQosIPHCStatsEntry 13 }

cbQosIPHCTcpSentPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The upper 32 bits count of outbound TCP packets.
"
    ::= { cbQosIPHCStatsEntry 14 }

cbQosIPHCTcpSentPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The lower 32 bits count of outbound TCP packets.
"
    ::= { cbQosIPHCStatsEntry 15 }

cbQosIPHCTcpSentPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of outbound TCP packets.
"
    ::= { cbQosIPHCStatsEntry 16 }

cbQosIPHCTcpCmprsOutPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of outbound compressed
        TCP packets.
" 
    ::= { cbQosIPHCStatsEntry 17 }

cbQosIPHCTcpCmprsOutPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of outbound compressed
        TCP packets.
" 
    ::= { cbQosIPHCStatsEntry 18 }

cbQosIPHCTcpCmprsOutPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of outbound compressed TCP
        packets.
" 
    ::= { cbQosIPHCStatsEntry 19 }

cbQosIPHCTcpSavedByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of TCP bytes that saved
        due to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 20 }

cbQosIPHCTcpSavedByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of TCP bytes that saved
        due to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 21 }

cbQosIPHCTcpSavedByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of TCP bytes that saved due
        to IPHC.
" 
    ::= { cbQosIPHCStatsEntry 22 }

cbQosIPHCTcpSentByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The upper 32 bits count of outbound TCP bytes.
"
    ::= { cbQosIPHCStatsEntry 23 }

cbQosIPHCTcpSentByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The lower 32 bits count of outbound TCP bytes.
"
    ::= { cbQosIPHCStatsEntry 24 }

cbQosIPHCTcpSentByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 64 bits count of outbound TCP bytes.
"
    ::= { cbQosIPHCStatsEntry 25 }

cbQosIPHCTcpSentByteRate OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "Octets per second"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The 32 bits count of outbound TCP byte rate.
"
    ::= { cbQosIPHCStatsEntry 26 }
 

-- end of cbQosIPHCStatsTable
--   

-- Start of cbQosSetStatsTable

cbQosSetStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosSetStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies packet marking statistical
        information.
"
    ::= { cbQosSetStats 1 }

cbQosSetStatsEntry OBJECT-TYPE
    SYNTAX          CbQosSetStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the packets that
        marked by each marking type.

        This table contains statistical information only,
        no configuration information associated with it.
        Therefore, it is indexed by the instance specific
        IDs, namely cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosSetStatsTable 1 }

CbQosSetStatsEntry ::= SEQUENCE {
        cbQosSetDscpPkt64              Counter64,
        cbQosSetPrecedencePkt64        Counter64,
        cbQosSetQosGroupPkt64          Counter64,
        cbQosSetFrDePkt64              Counter64,
        cbQosSetAtmClpPkt64            Counter64,
        cbQosSetL2CosPkt64             Counter64,
        cbQosSetMplsExpImpositionPkt64 Counter64,
        cbQosSetDiscardClassPkt64      Counter64,
        cbQosSetMplsExpTopMostPkt64    Counter64,
        cbQosSetSrpPriorityPkt64       Counter64,
        cbQosSetFrFecnBecnPkt64        Counter64,
        cbQosSetDscpTunnelPkt64        Counter64,
        cbQosSetPrecedenceTunnelPkt64  Counter64
}

cbQosSetDscpPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose DSCP field is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 1 }

cbQosSetPrecedencePkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Precedence field is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 2 }

cbQosSetQosGroupPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Qos Group field is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 3 }

cbQosSetFrDePkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Frame Relay DE Bit
        is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 4 }

cbQosSetAtmClpPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose ATM CLP Bit is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 5 }

cbQosSetL2CosPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Layer 2 Cos field is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 6 }

cbQosSetMplsExpImpositionPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose MPLS Experimental
        Imposition field is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 7 }

cbQosSetDiscardClassPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Discard Class field
        is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 8 }

cbQosSetMplsExpTopMostPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose MPLS Experimental
        TopMost field is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 9 }

cbQosSetSrpPriorityPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose SRP Priority field
        is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 10 }

cbQosSetFrFecnBecnPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Frame Relay FECN
        BECN field is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 11 }

cbQosSetDscpTunnelPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose DSCP Tunnel field is
        marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 12 }

cbQosSetPrecedenceTunnelPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets whose Precedence Tunnel
        field is marked by Set feature.
" 
    ::= { cbQosSetStatsEntry 13 }
 

-- end of cbQosSetStats
--   

--   
-- Beginning of cbQosPoliceColorStats

cbQosPoliceColorStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosPoliceColorStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Police Action related Statistical
        information for two rate color aware marker.
"
    ::= { cbQosPoliceColorStats 1 }

cbQosPoliceColorStatsEntry OBJECT-TYPE
    SYNTAX          CbQosPoliceColorStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about Police Action for Two Rate Color
        Aware Marker.

        This table contains statistical information only,
        no configuration information associated with it.
        Therefore, it is indexed by the instance specific IDs,
        such as cbQosPolicyIndex and cbQosObjectsIndex.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosPoliceColorStatsTable 1 }

CbQosPoliceColorStatsEntry ::= SEQUENCE {
        cbQosPoliceCfmColorCfmPkt64  Counter64,
        cbQosPoliceCfmColorCfmByte64 Counter64,
        cbQosPoliceCfmColorExdPkt64  Counter64,
        cbQosPoliceCfmColorExdByte64 Counter64,
        cbQosPoliceCfmColorVltPkt64  Counter64,
        cbQosPoliceCfmColorVltByte64 Counter64,
        cbQosPoliceExdColorExdPkt64  Counter64,
        cbQosPoliceExdColorExdByte64 Counter64,
        cbQosPoliceExdColorVltPkt64  Counter64,
        cbQosPoliceExdColorVltByte64 Counter64,
        cbQosPoliceVltColorVltPkt64  Counter64,
        cbQosPoliceVltColorVltByte64 Counter64
}

cbQosPoliceCfmColorCfmPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Conform-Color by previous node and treated as
        conforming by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 1 }

cbQosPoliceCfmColorCfmByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Conform-Color by previous node and treated as
        conforming by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 2 }

cbQosPoliceCfmColorExdPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Conform-Color by previous node and treated as
        exceeding by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 3 }

cbQosPoliceCfmColorExdByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Conform-Color by previous node and treated as
        exceeding by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 4 }

cbQosPoliceCfmColorVltPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Conform-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 5 }

cbQosPoliceCfmColorVltByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Conform-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 6 }

cbQosPoliceExdColorExdPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Exceed-Color by previous node and treated as
        exceeding by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 7 }

cbQosPoliceExdColorExdByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Exceed-Color by previous node and treated as
        exceeding by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 8 }

cbQosPoliceExdColorVltPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Exceed-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 9 }

cbQosPoliceExdColorVltByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Exceed-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 10 }

cbQosPoliceVltColorVltPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets which are marked as
        Violate-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 11 }

cbQosPoliceVltColorVltByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes which are marked as
        Violate-Color by previous node and treated as
        violating by the policing feature on this node.
" 
    ::= { cbQosPoliceColorStatsEntry 12 }
 

-- end of cbQosPoliceColorStats
--   

--   
-- Beginning of cbQosTableMapCfg

cbQosTableMapCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosTableMapCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Table Map basic configuration
        information.
"
    ::= { cbQosTableMapCfg 1 }

cbQosTableMapCfgEntry OBJECT-TYPE
    SYNTAX          CbQosTableMapCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about a tablemap name, behavior and default
        value.  Each cbQosTableMapCfgName is a unique character
        string in QOS.  This table contains configuration
        information only, no statistics associated with it.
"
    INDEX           { cbQosTableMapCfgIndex } 
    ::= { cbQosTableMapCfgTable 1 }

CbQosTableMapCfgEntry ::= SEQUENCE {
        cbQosTableMapCfgIndex    Unsigned32,
        cbQosTableMapCfgName     DisplayString,
        cbQosTableMapCfgBehavior INTEGER,
        cbQosTableMapCfgDftValue Unsigned32
}

cbQosTableMapCfgIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
   DESCRIPTION        "An arbitrary (system-assigned) index for tablemap.
"
    ::= { cbQosTableMapCfgEntry 1 }

cbQosTableMapCfgName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Name of the tablemap.
"
    ::= { cbQosTableMapCfgEntry 2 }

cbQosTableMapCfgBehavior OBJECT-TYPE
    SYNTAX          INTEGER  {
                        value(1),
                        copy(2),
                        ignore(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The behavior of a tablemap.
        value(1)    Always set to-value to be a configurable
                    default value <0-99> which is defined in
                    cbQosTableMapCfgDftValue.

        copy(2)     Always copy from-value to to-value in case
                    the from-value is not found in the tablemap.
                    This is the default behavior for a tablemap.

        ignore(3)   Ignore to set to-value when from-value
                    is not found in the tablemap.
" 
    ::= { cbQosTableMapCfgEntry 3 }

cbQosTableMapCfgDftValue OBJECT-TYPE
    SYNTAX          Unsigned32 (0..99)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The configurable default value used when
        cbQosTableMapCfgBehavior is value(1).
" 
    ::= { cbQosTableMapCfgEntry 4 }
 

-- end of cbQosTableMapCfg
--   

--   
-- Beginning of cbQosTableMapValueCfg

cbQosTableMapValueCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosTableMapValueCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies the from-value to to-value
        conversion pairs for a tablemap.
"
    ::= { cbQosTableMapValueCfg 1 }

cbQosTableMapValueCfgEntry OBJECT-TYPE
    SYNTAX          CbQosTableMapValueCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table specifies a from-value to
        to-value conversion pair for a given tablemap.
        This table contains configuration information only,
        no statistics associated with it.
"
    INDEX           {
                        cbQosTableMapCfgIndex,
                        cbQosTableMapValueCfgFrom
                    } 
    ::= { cbQosTableMapValueCfgTable 1 }

CbQosTableMapValueCfgEntry ::= SEQUENCE {
        cbQosTableMapValueCfgFrom Unsigned32,
        cbQosTableMapValueCfgTo   Unsigned32
}

cbQosTableMapValueCfgFrom OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This is the from-value in the tablemap.  If
        cbQosTableMapCfgBehavior equals to either copy(2) or
        ignore(3), when the content in the from-type(e.g.,
        cbQosTMSetIpDscpFromType) equals to this value, the
        value in the to-type(e.g., IpDscp) will be set to
        cbQosTableMapValueCfgTo.  Each tablemap can configure
        multiple from-value/to-value pairs.
" 
    ::= { cbQosTableMapValueCfgEntry 1 }

cbQosTableMapValueCfgTo OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This is the to-value in the tablemap.  Its usage is
        described in cbQosTableMapValueCfgFrom.
" 
    ::= { cbQosTableMapValueCfgEntry 2 }
 

-- end of cbQosTableMapValueCfg
--   

--   

-- Beginning of cbQosTableMapSetCfg

cbQosTableMapSetCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosTableMapSetCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies enhanced packet marking
        configuration using a pre-defined tablemap.
"
    ::= { cbQosTableMapSetCfg 1 }

cbQosTableMapSetCfgEntry OBJECT-TYPE
    SYNTAX          CbQosTableMapSetCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information for an Enhanced Packet Marking Action.
        The enhanced packet marking action uses a pre-configured
        table-map to do the from-value to to-value conversion.
        The packet marking to-type and from-type relationship
        can be established by using the table-map.
        Following is an example:
        cbQosTMSetIpDscpFromType == qosGroup(3)
        cbQosTMSetIpDscpMapName == 'MyTableMap',
        it means that table-map 'MyTableMap' will be used to
        convert the QosGroup value and the converted value will
        be used to set IpDSCP.

        cbQosConfigIndex is drived directly from
        cbQosSetCfgTable to keep the 1-to-1 mapping between
        two tables.  This table contains configuration
        information only, no statistics associated with it.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosTableMapSetCfgTable 1 }

CbQosTableMapSetCfgEntry ::= SEQUENCE {
        cbQosTMSetIpDscpFromType       CbQosTMSetType,
        cbQosTMSetIpDscpMapName        DisplayString,
        cbQosTMSetIpPrecedenceFromType CbQosTMSetType,
        cbQosTMSetIpPrecedenceMapName  DisplayString,
        cbQosTMSetQosGroupFromType     CbQosTMSetType,
        cbQosTMSetQosGroupMapName      DisplayString,
        cbQosTMSetL2CosFromType        CbQosTMSetType,
        cbQosTMSetL2CosMapName         DisplayString,
        cbQosTMSetMplsExpImpFromType   CbQosTMSetType,
        cbQosTMSetMplsExpImpMapName    DisplayString,
        cbQosTMSetMplsExpTopFromType   CbQosTMSetType,
        cbQosTMSetMplsExpTopMapName    DisplayString
}

cbQosTMSetIpDscpFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set IpDSCP.
" 
    ::= { cbQosTableMapSetCfgEntry 1 }

cbQosTMSetIpDscpMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set IpDSCP value.
" 
    ::= { cbQosTableMapSetCfgEntry 2 }

cbQosTMSetIpPrecedenceFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set IpPrecedence.
" 
    ::= { cbQosTableMapSetCfgEntry 3 }

cbQosTMSetIpPrecedenceMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set IpPrecedence value.
" 
    ::= { cbQosTableMapSetCfgEntry 4 }

cbQosTMSetQosGroupFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set QosGroup.
" 
    ::= { cbQosTableMapSetCfgEntry 5 }

cbQosTMSetQosGroupMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set QosGroup value.
" 
    ::= { cbQosTableMapSetCfgEntry 6 }

cbQosTMSetL2CosFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set L2Cos.
" 
    ::= { cbQosTableMapSetCfgEntry 7 }

cbQosTMSetL2CosMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set L2Cos value.
" 
    ::= { cbQosTableMapSetCfgEntry 8 }

cbQosTMSetMplsExpImpFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set MplsExpImposition.
" 
    ::= { cbQosTableMapSetCfgEntry 9 }

cbQosTMSetMplsExpImpMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set MplsExpImposition value.
" 
    ::= { cbQosTableMapSetCfgEntry 10 }

cbQosTMSetMplsExpTopFromType OBJECT-TYPE
    SYNTAX          CbQosTMSetType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The packet marking type whose value will be converted
        to a to-value based on a pre-configured table-map.  The
        to-value will then be used to set MplsExpTopMost.
" 
    ::= { cbQosTableMapSetCfgEntry 11 }

cbQosTMSetMplsExpTopMapName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of a pre-configured table-map used to convert
        and set MplsExpTopMost value.
" 
    ::= { cbQosTableMapSetCfgEntry 12 }
 

-- end of cbQosTableMapSetCfg
--   

--   
-- Start of cbQosEBCfgTable

cbQosEBCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosEBCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Estimate Bandwidth related
        configuration information.
"
    ::= { cbQosEBCfg 1 }

cbQosEBCfgEntry OBJECT-TYPE
    SYNTAX          CbQosEBCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about Estimate Bandwidth. It includes: 
        drop target, delay target and delay threshold.

        This table contains configuration information only.
        It is indexed by the cbQosConfigIndex.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosEBCfgTable 1 }

CbQosEBCfgEntry ::= SEQUENCE {
        cbQosEBCfgMechanism      CbQosEBType,
        cbQosEBCfgDropTarget     Unsigned32,
        cbQosEBCfgDelayTarget    Unsigned32,
        cbQosEBCfgDelayThreshold Unsigned32
}

cbQosEBCfgMechanism OBJECT-TYPE
    SYNTAX          CbQosEBType
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "Bandwidth estimate algorithm type.
"
    ::= { cbQosEBCfgEntry 1 }

cbQosEBCfgDropTarget OBJECT-TYPE
    SYNTAX          Unsigned32 (50..1000000)
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "One-in-Number target indicating that no more than
        one packet in (this) number will be dropped.
" 
    ::= { cbQosEBCfgEntry 2 }

cbQosEBCfgDelayTarget OBJECT-TYPE
    SYNTAX          Unsigned32 (50..1000000)
    UNITS           "packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "One-in-Number target indicating that no more than
        one packet in (this) number will exceed the delay 
        threshold specified by cbQosEBCfgDelayThreshold.
" 
    ::= { cbQosEBCfgEntry 3 }

cbQosEBCfgDelayThreshold OBJECT-TYPE
    SYNTAX          Unsigned32 (16..1000)
    UNITS           "millisecond"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The time in milliseconds for the delay threshold.
"
    ::= { cbQosEBCfgEntry 4 }
 

-- End of cbQosEBCfgTable
--   

--   
-- Start of cbQosEBStatsTable

cbQosEBStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosEBStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies Estimate Bandwidth related
        statistical information.
"
    ::= { cbQosEBStats 1 }

cbQosEBStatsEntry OBJECT-TYPE
    SYNTAX          CbQosEBStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes Estimate Bandwidth
        related statistical information.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex
                    } 
    ::= { cbQosEBStatsTable 1 }

CbQosEBStatsEntry ::= SEQUENCE {
        cbQosEBStatsCorvilEBValue  Gauge32,
        cbQosEBStatsCorvilEBStatus TruthValue,
        cbQosEBStatsCorvilCTD      CbQosEBCtd
}

cbQosEBStatsCorvilEBValue OBJECT-TYPE
    SYNTAX          Gauge32
    UNITS           "kbps"
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The current Corvil EB bandwidth value.
"
    ::= { cbQosEBStatsEntry 1 }

cbQosEBStatsCorvilEBStatus OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Boolean to indicate if Corvil EB is ready.
        true  - Bandwidth estimate is available.
        false - Bandwidth estimate is not available.
" 
    ::= { cbQosEBStatsEntry 2 }

cbQosEBStatsCorvilCTD OBJECT-TYPE
    SYNTAX          CbQosEBCtd
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The Corvil CTD value defined by CbQosEBCtd.
"
    ::= { cbQosEBStatsEntry 3 }
 

-- End of cbQosEBStatsTable
--   

-- Start of cbQosC3plAccountCfgTable

cbQosC3plAccountCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosC3plAccountCfgEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies C3pl Account Action configuration
        information
"
    ::= { cbQosC3plAccountCfg 1 }

cbQosC3plAccountCfgEntry OBJECT-TYPE
    SYNTAX          CbQosC3plAccountCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes configuration
        information about a c3pl account action. The information
        includes: feature type.

        This table contains configuration information only,
        no statistics associated with it. Therefore, it is indexed
        by the cbQosConfigIndex of each C3pl Account Action.
"
    INDEX           { cbQosConfigIndex } 
    ::= { cbQosC3plAccountCfgTable 1 }

CbQosC3plAccountCfgEntry ::= SEQUENCE {
        cbQosC3plAccountFeatureType SetC3plAccountFeatureType
}

cbQosC3plAccountFeatureType OBJECT-TYPE
    SYNTAX          SetC3plAccountFeatureType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The feature type is used to indicated different drop
        statistics.
" 
    ::= { cbQosC3plAccountCfgEntry 1 }
 

-- End of cbQosQueueingCfg Group
--   

--   
-- Start of cbQosC3plAccountStats group

cbQosC3plAccountStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CbQosC3plAccountStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table specifies C3pl Account Action related
        statistics information.
"
    ::= { cbQosC3plAccountStats 1 }

cbQosC3plAccountStatsEntry OBJECT-TYPE
    SYNTAX          CbQosC3plAccountStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Each entry in this table describes the statistical
        information about C3pl Account Action. Account action
        specific information you can find in this table are :
        queueing drop pkt/byte counters, wred drop pkt/byte
        counters, police pkt/byte counters.

        This table contains statistical information only,
        no configuration information associated with it.
        Therefore, it is indexed by the instance specific IDs,
        such as cbQosPolicyIndex, cbQosObjectsIndex, and
        cbQosC3plAccountFeatureType.
"
    INDEX           {
                        cbQosPolicyIndex,
                        cbQosObjectsIndex,
                        cbQosC3plAccountFeatureType
                    } 
    ::= { cbQosC3plAccountStatsTable 1 }

CbQosC3plAccountStatsEntry ::= SEQUENCE {
        cbQosC3plAccountDropPktOverflow      Counter32,
        cbQosC3plAccountDropPkt              Counter32,
        cbQosC3plAccountDropPkt64            Counter64,
        cbQosC3plAccountDropByteOverflow     Counter32,
        cbQosC3plAccountDropByte             Counter32,
        cbQosC3plAccountDropByte64           Counter64,
        cbQosC3plAccountTailDropPktOverflow  Counter32,
        cbQosC3plAccountTailDropPkt          Counter32,
        cbQosC3plAccountTailDropPkt64        Counter64,
        cbQosC3plAccountTailDropByteOverflow Counter32,
        cbQosC3plAccountTailDropByte         Counter32,
        cbQosC3plAccountTailDropByte64       Counter64
}

cbQosC3plAccountDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 1 }

cbQosC3plAccountDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets dropped when
        the number of packets in the associated queue was
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 2 }

cbQosC3plAccountDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets dropped when the number
        of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 3 }

cbQosC3plAccountDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 4 }

cbQosC3plAccountDropByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of bytes dropped when
        the number of packets in the associated queue was
        greater than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 5 }

cbQosC3plAccountDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes dropped when the number of
        packets in the associated queue was greater
        than the minimum threshold and less than the
        maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 6 }

cbQosC3plAccountTailDropPktOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 7 }

cbQosC3plAccountTailDropPkt OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of packets dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 8 }

cbQosC3plAccountTailDropPkt64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of packets dropped when the number
        of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 9 }

cbQosC3plAccountTailDropByteOverflow OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The upper 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 10 }

cbQosC3plAccountTailDropByte OBJECT-TYPE
    SYNTAX          Counter32
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The lower 32 bits count of bytes dropped when the
        number of packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 11 }

cbQosC3plAccountTailDropByte64 OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Octets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The 64 bits count of bytes dropped when the number of
        packets in the associated queue was greater
        than the maximum threshold.
" 
    ::= { cbQosC3plAccountStatsEntry 12 }
 

-- end of cbQosC3plAccountStatsTable

ciscocbQosMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscocbQosMIBConformance 1 }

ciscocbQosMIBGroups  OBJECT IDENTIFIER
    ::= { ciscocbQosMIBConformance 2 }


-- compliance statements

ciscocbQosMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroup,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroup,
                        cbQosREDCfgGroup,
                        cbQosREDClassCfgGroup,
                        cbQosPoliceCfgGroup,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroup,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"
    ::= { ciscocbQosMIBCompliances 1 }

ciscocbQosMIBComplianceRev1 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBCompliance.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroup,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev1,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev1,
                        cbQosPoliceCfgGroupRev1,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroup,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"
    ::= { ciscocbQosMIBCompliances 2 }

ciscocbQosMIBComplianceRev2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev1.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroup,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev1,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev1,
                        cbQosPoliceCfgGroupRev2,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosNewSetCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos config.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"
    ::= { ciscocbQosMIBCompliances 3 }

-- units of conformance

ciscocbQosMIBComplianceRev3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev2.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev1,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev1,
                        cbQosPoliceCfgGroupRev2,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosNewSetCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos config.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"
    ::= { ciscocbQosMIBCompliances 4 }

-- units of conformance

ciscocbQosMIBComplianceRev4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev2.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev1,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev1,
                        cbQosPoliceCfgGroupRev2,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosNewSetCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos config.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"

    GROUP           cbQosMeasureIPSLACfgGroup
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"
    ::= { ciscocbQosMIBCompliances 5 }

ciscocbQosMIBComplianceRev5 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev4.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev1,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev1,
                        cbQosPoliceCfgGroupRev2,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosNewSetCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos config.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"

    GROUP           cbQosMeasureIPSLACfgGroup
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"

    GROUP           cbQosTSCfgExtGroup
    DESCRIPTION        "This group is applicable for those platforms that
        support shape rate greater than maximum value 
        reportable by cbQosTSCfgRate.
"
    ::= { ciscocbQosMIBCompliances 6 }

ciscocbQosMIBComplianceRev6 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev5.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev2,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev2,
                        cbQosPoliceCfgGroupRev3,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup,
                        cbQosQueueingClassCfgGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"

    GROUP           cbQosMeasureIPSLACfgGroup
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"

    GROUP           cbQosTSCfgExtGroup
    DESCRIPTION        "This group is applicable for those platforms that
        support shape rate greater than maximum value 
        reportable by cbQosTSCfgRate.
"

    GROUP           cbQosSetCfgL2Group
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos or SET L2 Cos Inner config.
"

    GROUP           cbQosServicePolicyExtGroup
    DESCRIPTION        "Optional objects to provide more information about a
        particular service policy instance.
"
    ::= { ciscocbQosMIBCompliances 7 }

ciscocbQosMIBComplianceRev7 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev5.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev2,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev2,
                        cbQosPoliceCfgGroupRev3,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup,
                        cbQosQueueingClassCfgGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"

    GROUP           cbQosMeasureIPSLACfgGroup
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"

    GROUP           cbQosTSCfgExtGroup
    DESCRIPTION        "This group is applicable for those platforms that
        support shape rate greater than maximum value 
        reportable by cbQosTSCfgRate.
"

    GROUP           cbQosSetCfgL2Group
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos or SET L2 Cos Inner config.
"

    GROUP           cbQosServicePolicyExtGroup
    DESCRIPTION        "Optional objects to provide more information about a
        particular service policy instance.
"

    GROUP           cbQosC3plAccountCfgGroup
    DESCRIPTION        "This group is only available on platform that supporting
        c3pl account action configuration information.
"

    GROUP           cbQosC3plAccountStatsGroup
    DESCRIPTION        "This group is only available on platform that supporting
        c3pl account action configuration information.
"
    ::= { ciscocbQosMIBCompliances 8 }

ciscocbQosMIBComplianceRev8 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION        "The compliance statement for entities that implement
        class-based QoS on a Cisco router. This compliance module
        deprecates ciscocbQosMIBComplianceRev7.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cbQosServicePolicyGroupRev1,
                        cbQosObjectsGroup,
                        cbQosPolicyMapCfgGroup,
                        cbQosClassMapCfgGroup,
                        cbQosMatchStmtCfgGroup,
                        cbQosQueueingCfgGroupRev2,
                        cbQosREDDscpCfgGroup,
                        cbQosREDCfgGroupRev1,
                        cbQosREDClassCfgGroupRev2,
                        cbQosPoliceCfgGroupRev3,
                        cbQosTSCfgGroup,
                        cbQosSetCfgGroupRev1,
                        cbQosClassMapStatsGroup,
                        cbQosMatchStmtStatsGroup,
                        cbQosPoliceStatsGroup,
                        cbQosQueueingStatsGroup,
                        cbQosTSStatsGroup,
                        cbQosREDClassStatsGroup,
                        cbQosQueueingClassCfgGroup
                    }

    GROUP           cbQosInterfacePolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosFrameRelayVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosATMPVCPolicyGroup
    DESCRIPTION        "This is a optional group of information
"

    GROUP           cbQosNoBufferDropGroup
    DESCRIPTION        "This group is only available for code running on the
        7500 platform.
"

    GROUP           cbQosQueueingDynamicQNumberGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosREDClassXmitCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED transmit stats.
"

    GROUP           cbQosREDECNCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN configuration.
"

    GROUP           cbQosREDClassECNMarkCountersGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting WRED ECN stats.
"

    GROUP           cbQosAFPoliceStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting POLICE violate action stats.
"

    GROUP           cbQosPoliceCfgPirGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police PIR configuration.
"

    GROUP           cbQosPoliceCfgExtGroup
    DESCRIPTION        "This group is only available for code running on the
        Catalyst 4000 platform.
"

    GROUP           cbQosPoliceActionCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE conform/exceed actions.
"

    GROUP           cbQosAFPoliceViolateCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting multiple POLICE violate actions.
"

    GROUP           cbQosPoliceCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting police CIR/PIR in percentage.
"

    GROUP           cbQosTrafficShapingDelayCountersGroup
    DESCRIPTION        "This group is only available for code running on the
        7200 and/or lower platforms.
"

    GROUP           cbQosTSCfgPercentGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting committed shaping rate in percentage.
"

    GROUP           cbQosSetCfgMplsImpositionGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Imposition config.
"

    GROUP           cbQosSetCfgDiscardClassGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET Discard Class config.
"

    GROUP           cbQosSetCfgMPLSTopMostGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET MPLS Experimental Top Most config.
"

    GROUP           cbQosIPHCCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC configuration.
"

    GROUP           cbQosIPHCStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting IPHC stats.
"

    GROUP           cbQosQueueingCfgQLimitTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Queue limit configuration.
"

    GROUP           cbQosREDCfgThresholdTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based RED threshold configuration.
"

    GROUP           cbQosPoliceCfgCellGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting cell-based Policing Rate and Burst
        configuration.
"

    GROUP           cbQosPoliceCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Policing Burst configuration.
"

    GROUP           cbQosPoliceCfgCdvtGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing ATM CDVT configuration.
"

    GROUP           cbQosPoliceCfgColorGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware configuration.
"

    GROUP           cbQosTSCfgTimeGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting time-based Shaping Burst configuration.
"

    GROUP           cbQosSetCfgSrpPriorityGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SRP Priority SET configuration.
"

    GROUP           cbQosSetCfgFrFecnBecnGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Frame Relay FECN BECN SET configuration.
"

    GROUP           cbQosSetStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting SET stats.
"

    GROUP           cbQosPoliceColorStatsGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Policing Color Aware stats.
"

    GROUP           cbQosTableMapCfgGroup
    DESCRIPTION        "This group is only available on platforms that
        supporting Enhanced Packet Marking.
"

    GROUP           cbQosEBCfgGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth.
"

    GROUP           cbQosEBStatsGroup
    DESCRIPTION        "This group is only available on platforms
        supporting Estimate Bandwidth stats.
"

    GROUP           cbQosMeasureIPSLACfgGroup
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"

    GROUP           cbQosTSCfgExtGroup
    DESCRIPTION        "This group is applicable for those platforms that
        support shape rate greater than maximum value 
        reportable by cbQosTSCfgRate.
"

    GROUP           cbQosSetCfgL2Group
    DESCRIPTION        "This group is only available on platforms that
        supporting SET L2 Cos or SET L2 Cos Inner config.
"

    GROUP           cbQosServicePolicyExtGroup
    DESCRIPTION        "Optional objects to provide more information about a
        particular service policy instance.
"

    GROUP           cbQosC3plAccountCfgGroup
    DESCRIPTION        "This group is only available on platform that supporting
        c3pl account action configuration information.
"

    GROUP           cbQosC3plAccountStatsGroup
    DESCRIPTION        "This group is only available on platform that supporting
        c3pl account action configuration information.
"

    GROUP           cbQosSetCfgFrDeGroup
    DESCRIPTION        "Optional group providing information on frame-relay discard bit
        in frame-relay header on platforms supporting frame-relay.
"
    ::= { ciscocbQosMIBCompliances 9 }

cbQosServicePolicyGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosIfType,
                        cbQosPolicyDirection,
                        cbQosIfIndex,
                        cbQosFrDLCI,
                        cbQosAtmVPI,
                        cbQosAtmVCI
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 1 }

cbQosInterfacePolicyGroup OBJECT-GROUP
    OBJECTS         { cbQosIFPolicyIndex }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 2 }

cbQosFrameRelayVCPolicyGroup OBJECT-GROUP
    OBJECTS         { cbQosFRPolicyIndex }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 3 }

cbQosATMPVCPolicyGroup OBJECT-GROUP
    OBJECTS         { cbQosATMPolicyIndex }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 4 }

cbQosObjectsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosConfigIndex,
                        cbQosObjectsType,
                        cbQosParentObjectsIndex
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 5 }

cbQosPolicyMapCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPolicyMapName,
                        cbQosPolicyMapDesc
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 6 }

cbQosClassMapCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosCMName,
                        cbQosCMDesc,
                        cbQosCMInfo
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 7 }

cbQosMatchStmtCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosMatchStmtName,
                        cbQosMatchStmtInfo
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 8 }

cbQosQueueingCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosQueueingCfgBandwidth,
                        cbQosQueueingCfgBandwidthUnits,
                        cbQosQueueingCfgFlowEnabled,
                        cbQosQueueingCfgPriorityEnabled,
                        cbQosQueueingCfgAggregateQSize,
                        cbQosQueueingCfgIndividualQSize,
                        cbQosQueueingCfgPrioBurstSize
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 9 }

cbQosREDCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDCfgExponWeight,
                        cbQosREDCfgMeanQsize
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 10 }

cbQosREDClassCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDCfgMinThreshold,
                        cbQosREDCfgMaxThreshold,
                        cbQosREDCfgPktDropProb
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 11 }

cbQosPoliceCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgRate,
                        cbQosPoliceCfgBurstSize,
                        cbQosPoliceCfgExtBurstSize,
                        cbQosPoliceCfgConformAction,
                        cbQosPoliceCfgConformSetValue,
                        cbQosPoliceCfgExceedAction,
                        cbQosPoliceCfgExceedSetValue,
                        cbQosPoliceCfgPir
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 12 }

cbQosTSCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTSCfgRate,
                        cbQosTSCfgBurstSize,
                        cbQosTSCfgExtBurstSize,
                        cbQosTSCfgAdaptiveEnabled,
                        cbQosTSCfgAdaptiveRate,
                        cbQosTSCfgLimitType
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 13 }

cbQosSetCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosSetCfgFeature,
                        cbQosSetCfgIpDSCPValue,
                        cbQosSetCfgIpPrecedenceValue,
                        cbQosSetCfgQosGroupValue,
                        cbQosSetCfgL2CosValue,
                        cbQosSetCfgMplsExpValue,
                        cbQosSetCfgDiscardClassValue
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 14 }

cbQosClassMapStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosCMPrePolicyPktOverflow,
                        cbQosCMPrePolicyPkt,
                        cbQosCMPrePolicyPkt64,
                        cbQosCMPrePolicyByteOverflow,
                        cbQosCMPrePolicyByte,
                        cbQosCMPrePolicyByte64,
                        cbQosCMPrePolicyBitRate,
                        cbQosCMPostPolicyByteOverflow,
                        cbQosCMPostPolicyByte,
                        cbQosCMPostPolicyByte64,
                        cbQosCMPostPolicyBitRate,
                        cbQosCMDropPktOverflow,
                        cbQosCMDropPkt,
                        cbQosCMDropPkt64,
                        cbQosCMDropByteOverflow,
                        cbQosCMDropByte,
                        cbQosCMDropByte64,
                        cbQosCMDropBitRate
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 15 }

cbQosNoBufferDropGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosCMNoBufDropPktOverflow,
                        cbQosCMNoBufDropPkt,
                        cbQosCMNoBufDropPkt64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS summary statistics.
"
    ::= { ciscocbQosMIBGroups 16 }

cbQosQueueingDynamicQNumberGroup OBJECT-GROUP
    OBJECTS         { cbQosQueueingCfgDynamicQNumber }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS Queueing information.
"
    ::= { ciscocbQosMIBGroups 17 }

cbQosTrafficShapingDelayCountersGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTSStatsDelayedByteOverflow,
                        cbQosTSStatsDelayedByte,
                        cbQosTSStatsDelayedByte64,
                        cbQosTSStatsDelayedPktOverflow,
                        cbQosTSStatsDelayedPkt,
                        cbQosTSStatsDelayedPkt64,
                        cbQosTSStatsActive
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS traffic-shaping
        information.
"
    ::= { ciscocbQosMIBGroups 18 }

cbQosMatchStmtStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosMatchPrePolicyPktOverflow,
                        cbQosMatchPrePolicyPkt,
                        cbQosMatchPrePolicyPkt64,
                        cbQosMatchPrePolicyByteOverflow,
                        cbQosMatchPrePolicyByte,
                        cbQosMatchPrePolicyByte64,
                        cbQosMatchPrePolicyBitRate
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 19 }

cbQosPoliceStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceConformedPktOverflow,
                        cbQosPoliceConformedPkt,
                        cbQosPoliceConformedPkt64,
                        cbQosPoliceConformedByteOverflow,
                        cbQosPoliceConformedByte,
                        cbQosPoliceConformedByte64,
                        cbQosPoliceConformedBitRate,
                        cbQosPoliceExceededPktOverflow,
                        cbQosPoliceExceededPkt,
                        cbQosPoliceExceededPkt64,
                        cbQosPoliceExceededByteOverflow,
                        cbQosPoliceExceededByte,
                        cbQosPoliceExceededByte64,
                        cbQosPoliceExceededBitRate
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 20 }

cbQosQueueingStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosQueueingCurrentQDepth,
                        cbQosQueueingMaxQDepth,
                        cbQosQueueingDiscardByteOverflow,
                        cbQosQueueingDiscardByte,
                        cbQosQueueingDiscardByte64,
                        cbQosQueueingDiscardPktOverflow,
                        cbQosQueueingDiscardPkt,
                        cbQosQueueingDiscardPkt64
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 21 }

cbQosTSStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTSStatsDropByteOverflow,
                        cbQosTSStatsDropByte,
                        cbQosTSStatsDropByte64,
                        cbQosTSStatsDropPktOverflow,
                        cbQosTSStatsDropPkt,
                        cbQosTSStatsDropPkt64,
                        cbQosTSStatsCurrentQSize
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 22 }

cbQosREDClassStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDRandomDropPktOverflow,
                        cbQosREDRandomDropPkt,
                        cbQosREDRandomDropPkt64,
                        cbQosREDRandomDropByteOverflow,
                        cbQosREDRandomDropByte,
                        cbQosREDRandomDropByte64,
                        cbQosREDTailDropPktOverflow,
                        cbQosREDTailDropPkt,
                        cbQosREDTailDropPkt64,
                        cbQosREDTailDropByteOverflow,
                        cbQosREDTailDropByte,
                        cbQosREDTailDropByte64,
                        cbQosREDMeanQSizeUnits,
                        cbQosREDMeanQSize
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 23 }

cbQosREDClassXmitCountersGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDTransmitPktOverflow,
                        cbQosREDTransmitPkt,
                        cbQosREDTransmitPkt64,
                        cbQosREDTransmitByteOverflow,
                        cbQosREDTransmitByte,
                        cbQosREDTransmitByte64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 24 }

cbQosAFPoliceStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceViolatedPktOverflow,
                        cbQosPoliceViolatedPkt,
                        cbQosPoliceViolatedPkt64,
                        cbQosPoliceViolatedByteOverflow,
                        cbQosPoliceViolatedByte,
                        cbQosPoliceViolatedByte64,
                        cbQosPoliceViolatedBitRate
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 25 }

cbQosAFPoliceCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgViolateAction,
                        cbQosPoliceCfgViolateSetValue
                    }
    STATUS          deprecated
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 26 }

cbQosREDDscpCfgGroup OBJECT-GROUP
    OBJECTS         { cbQosREDCfgDscpPrec }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 27 }

cbQosNewSetCfgGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgL2CosValue }
    STATUS          deprecated
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 28 }

cbQosQueueingCfgGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cbQosQueueingCfgBandwidth,
                        cbQosQueueingCfgBandwidthUnits,
                        cbQosQueueingCfgFlowEnabled,
                        cbQosQueueingCfgPriorityEnabled,
                        cbQosQueueingCfgIndividualQSize,
                        cbQosQueueingCfgPrioBurstSize,
                        cbQosQueueingCfgQLimitUnits,
                        cbQosQueueingCfgAggregateQLimit
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 29 }

cbQosREDCfgGroupRev1 OBJECT-GROUP
    OBJECTS         { cbQosREDCfgExponWeight }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 30 }

cbQosREDClassCfgGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cbQosREDCfgPktDropProb,
                        cbQosREDClassCfgThresholdUnit,
                        cbQosREDClassCfgMinThreshold,
                        cbQosREDClassCfgMaxThreshold
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 31 }

cbQosPoliceCfgGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgRate,
                        cbQosPoliceCfgBurstSize,
                        cbQosPoliceCfgExtBurstSize,
                        cbQosPoliceCfgPir
                    }
    STATUS          deprecated
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 32 }

cbQosPoliceActionCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceActionCfgConform,
                        cbQosPoliceActionCfgConformSetValue,
                        cbQosPoliceActionCfgExceed,
                        cbQosPoliceActionCfgExceedSetValue
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 33 }

cbQosAFPoliceViolateCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceActionCfgViolate,
                        cbQosPoliceActionCfgViolateSetValue
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 34 }

cbQosREDECNCfgGroup OBJECT-GROUP
    OBJECTS         { cbQosREDCfgECNEnabled }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 35 }

cbQosREDClassECNMarkCountersGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDECNMarkPktOverflow,
                        cbQosREDECNMarkPkt,
                        cbQosREDECNMarkPkt64,
                        cbQosREDECNMarkByteOverflow,
                        cbQosREDECNMarkByte,
                        cbQosREDECNMarkByte64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 36 }

cbQosPoliceCfgExtGroup OBJECT-GROUP
    OBJECTS         { cbQosPoliceCfgRate64 }
    STATUS          current
    DESCRIPTION        "Optional objects to provide the information of the
        committed policing rate that is greater than the
        maximum value reportable by cbQosPoliceCfgRate.
"
    ::= { ciscocbQosMIBGroups 37 }

cbQosSetCfgGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cbQosSetCfgFeature,
                        cbQosSetCfgIpDSCPValue,
                        cbQosSetCfgIpPrecedenceValue,
                        cbQosSetCfgQosGroupValue
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information for SET/Marking feature.
"
    ::= { ciscocbQosMIBGroups 38 }

cbQosSetCfgMplsImpositionGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgMplsExpValue }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS objects configuration
        information for SET/Marking feature.
"
    ::= { ciscocbQosMIBGroups 39 }

cbQosSetCfgDiscardClassGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgDiscardClassValue }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS objects configuration
        information for SET/Marking feature.
"
    ::= { ciscocbQosMIBGroups 40 }

cbQosSetCfgMPLSTopMostGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgMplsExpTopMostValue }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS objects configuration
        information for SET/Marking feature.
"
    ::= { ciscocbQosMIBGroups 41 }

cbQosPoliceCfgGroupRev2 OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgRate,
                        cbQosPoliceCfgBurstSize,
                        cbQosPoliceCfgExtBurstSize
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information for POLICE feature.
"
    ::= { ciscocbQosMIBGroups 42 }

cbQosPoliceCfgPirGroup OBJECT-GROUP
    OBJECTS         { cbQosPoliceCfgPir }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing PIR rate.
"
    ::= { ciscocbQosMIBGroups 43 }

cbQosPoliceCfgPercentGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgRateType,
                        cbQosPoliceCfgPercentRateValue,
                        cbQosPoliceCfgPercentPirValue
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing CIR and PIR
        rates in percentage.
"
    ::= { ciscocbQosMIBGroups 44 }

cbQosTSCfgPercentGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTSCfgRateType,
                        cbQosTSCfgPercentRateValue
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS committed
        traffic-shaping rate in percentage.
"
    ::= { ciscocbQosMIBGroups 45 }

cbQosIPHCCfgGroup OBJECT-GROUP
    OBJECTS         { cbQosIPHCCfgOption }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS IP header compression
        configuration information.
"
    ::= { ciscocbQosMIBGroups 46 }

cbQosIPHCStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosIPHCRtpSentPktOverflow,
                        cbQosIPHCRtpSentPkt,
                        cbQosIPHCRtpSentPkt64,
                        cbQosIPHCRtpCmprsOutPktOverflow,
                        cbQosIPHCRtpCmprsOutPkt,
                        cbQosIPHCRtpCmprsOutPkt64,
                        cbQosIPHCRtpSavedByteOverflow,
                        cbQosIPHCRtpSavedByte,
                        cbQosIPHCRtpSavedByte64,
                        cbQosIPHCRtpSentByteOverflow,
                        cbQosIPHCRtpSentByte,
                        cbQosIPHCRtpSentByte64,
                        cbQosIPHCRtpSentByteRate,
                        cbQosIPHCTcpSentPktOverflow,
                        cbQosIPHCTcpSentPkt,
                        cbQosIPHCTcpSentPkt64,
                        cbQosIPHCTcpCmprsOutPktOverflow,
                        cbQosIPHCTcpCmprsOutPkt,
                        cbQosIPHCTcpCmprsOutPkt64,
                        cbQosIPHCTcpSavedByteOverflow,
                        cbQosIPHCTcpSavedByte,
                        cbQosIPHCTcpSavedByte64,
                        cbQosIPHCTcpSentByteOverflow,
                        cbQosIPHCTcpSentByte,
                        cbQosIPHCTcpSentByte64,
                        cbQosIPHCTcpSentByteRate
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS IP header compression
        statistic information.
"
    ::= { ciscocbQosMIBGroups 47 }

cbQosServicePolicyGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        cbQosIfType,
                        cbQosPolicyDirection,
                        cbQosIfIndex,
                        cbQosFrDLCI,
                        cbQosAtmVPI,
                        cbQosAtmVCI,
                        cbQosEntityIndex
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information. This group deprecates 
        cbQosServicePolicyGroup.
"
    ::= { ciscocbQosMIBGroups 48 }

cbQosQueueingCfgQLimitTimeGroup OBJECT-GROUP
    OBJECTS         { cbQosQueueingCfgAggrQLimitTime }
    STATUS          current
    DESCRIPTION        "Optional object to provide Aggregate Queue time based
        Limit configuration information.
"
    ::= { ciscocbQosMIBGroups 49 }

cbQosREDCfgThresholdTimeGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosREDClassCfgMinThresholdTime,
                        cbQosREDClassCfgMaxThresholdTime
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide WRED time based threshold
        Limit configuration information.
"
    ::= { ciscocbQosMIBGroups 50 }

cbQosPoliceCfgCellGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgCellRate,
                        cbQosPoliceCfgCellPir,
                        cbQosPoliceCfgBurstCell,
                        cbQosPoliceCfgExtBurstCell
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing cell based
        rate configuration information.
"
    ::= { ciscocbQosMIBGroups 51 }

cbQosPoliceCfgTimeGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgBurstTime,
                        cbQosPoliceCfgExtBurstTime
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing time based
        burst size configuration information.
"
    ::= { ciscocbQosMIBGroups 52 }

cbQosPoliceCfgCdvtGroup OBJECT-GROUP
    OBJECTS         { cbQosPoliceCfgCdvt }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing ATM CDVT
        configuration information.
"
    ::= { ciscocbQosMIBGroups 53 }

cbQosPoliceCfgColorGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgConformColor,
                        cbQosPoliceCfgExceedColor
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS policing color aware
        configuration information.
"
    ::= { ciscocbQosMIBGroups 54 }

cbQosTSCfgTimeGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTSCfgBurstTime,
                        cbQosTSCfgExtBurstTime
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS traffic-shaping
        time based burst size configuration information.
"
    ::= { ciscocbQosMIBGroups 55 }

cbQosSetCfgSrpPriorityGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgSrpPriority }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS SET SRP Priority
        configuration information.
"
    ::= { ciscocbQosMIBGroups 56 }

cbQosSetCfgFrFecnBecnGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgFrFecnBecn }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS SET Frame Relay
        FECN BECN configuration information.
"
    ::= { ciscocbQosMIBGroups 57 }

cbQosSetStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosSetDscpPkt64,
                        cbQosSetPrecedencePkt64,
                        cbQosSetQosGroupPkt64,
                        cbQosSetFrDePkt64,
                        cbQosSetAtmClpPkt64,
                        cbQosSetL2CosPkt64,
                        cbQosSetMplsExpImpositionPkt64,
                        cbQosSetDiscardClassPkt64,
                        cbQosSetMplsExpTopMostPkt64,
                        cbQosSetSrpPriorityPkt64,
                        cbQosSetFrFecnBecnPkt64,
                        cbQosSetDscpTunnelPkt64,
                        cbQosSetPrecedenceTunnelPkt64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS SET statistical
        information.
"
    ::= { ciscocbQosMIBGroups 58 }

cbQosPoliceColorStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfmColorCfmPkt64,
                        cbQosPoliceCfmColorCfmByte64,
                        cbQosPoliceCfmColorExdPkt64,
                        cbQosPoliceCfmColorExdByte64,
                        cbQosPoliceCfmColorVltPkt64,
                        cbQosPoliceCfmColorVltByte64,
                        cbQosPoliceExdColorExdPkt64,
                        cbQosPoliceExdColorExdByte64,
                        cbQosPoliceExdColorVltPkt64,
                        cbQosPoliceExdColorVltByte64,
                        cbQosPoliceVltColorVltPkt64,
                        cbQosPoliceVltColorVltByte64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS Assured Forwarding
        Policing Color Aware statistical information.
"
    ::= { ciscocbQosMIBGroups 59 }

cbQosTableMapCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosTableMapCfgName,
                        cbQosTableMapCfgBehavior,
                        cbQosTableMapCfgDftValue,
                        cbQosTableMapValueCfgTo,
                        cbQosTMSetIpDscpFromType,
                        cbQosTMSetIpDscpMapName,
                        cbQosTMSetIpPrecedenceFromType,
                        cbQosTMSetIpPrecedenceMapName,
                        cbQosTMSetQosGroupFromType,
                        cbQosTMSetQosGroupMapName,
                        cbQosTMSetL2CosFromType,
                        cbQosTMSetL2CosMapName,
                        cbQosTMSetMplsExpImpFromType,
                        cbQosTMSetMplsExpImpMapName,
                        cbQosTMSetMplsExpTopFromType,
                        cbQosTMSetMplsExpTopMapName
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS Enhanced Packet
        Marking configuration information.
"
    ::= { ciscocbQosMIBGroups 60 }

cbQosEBCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosEBCfgMechanism,
                        cbQosEBCfgDropTarget,
                        cbQosEBCfgDelayTarget,
                        cbQosEBCfgDelayThreshold
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide Estimate Bandwidth
        configuration information.
"
    ::= { ciscocbQosMIBGroups 61 }

cbQosEBStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosEBStatsCorvilEBValue,
                        cbQosEBStatsCorvilEBStatus,
                        cbQosEBStatsCorvilCTD
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide Estimate Bandwidth
        status information.
"
    ::= { ciscocbQosMIBGroups 62 }

cbQosServicePolicyExtGroup OBJECT-GROUP
    OBJECTS         { cbQosVlanIndex }
    STATUS          current
    DESCRIPTION        "Optional objects to provide more information about a
        particular service policy instance.
"
    ::= { ciscocbQosMIBGroups 63 }

cbQosMeasureIPSLACfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosMeasureIPSLACfgGroupIndex,
                        cbQosMeasureIPSLACfgGroupName
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to configure IPSLA measure action.
"
    ::= { ciscocbQosMIBGroups 64 }

cbQosTSCfgExtGroup OBJECT-GROUP
    OBJECTS         { cbQosTSCfgRate64 }
    STATUS          current
    DESCRIPTION        "Objects to provide the information of the
        committed shaping rate that is greater than the
        maximum value reportable by cbQosTSCfgRate.
"
    ::= { ciscocbQosMIBGroups 65 }

cbQosQueueingCfgGroupRev2 OBJECT-GROUP
    OBJECTS         {
                        cbQosQueueingCfgBandwidth,
                        cbQosQueueingCfgBandwidthUnits,
                        cbQosQueueingCfgFlowEnabled,
                        cbQosQueueingCfgPriorityEnabled,
                        cbQosQueueingCfgIndividualQSize,
                        cbQosQueueingCfgPrioBurstSize,
                        cbQosQueueingCfgQLimitUnits,
                        cbQosQueueingCfgAggregateQLimit,
                        cbQosQueueingCfgPriorityLevel
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information
"
    ::= { ciscocbQosMIBGroups 66 }

cbQosSetCfgL2Group OBJECT-GROUP
    OBJECTS         {
                        cbQosSetCfgL2CosValue,
                        cbQosSetCfgL2CosInnerValue
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide CB QoS objects configuration
        information
"
    ::= { ciscocbQosMIBGroups 67 }

cbQosREDClassCfgGroupRev2 OBJECT-GROUP
    OBJECTS         {
                        cbQosREDCfgPktDropProb,
                        cbQosREDClassCfgMinThreshold,
                        cbQosREDClassCfgMaxThreshold,
                        cbQosREDClassCfgMinThresholdTime,
                        cbQosREDClassCfgMaxThresholdTime,
                        cbQosREDClassCfgMaxThresholdUnit,
                        cbQosREDClassCfgMinThresholdUnit
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information.
"
    ::= { ciscocbQosMIBGroups 68 }

cbQosQueueingClassCfgGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosQueueingClassCfgThreshold,
                        cbQosQueueingClassCfgThresholdUnit,
                        cbQosQueueingClassCfgQLimitWeight
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information
"
    ::= { ciscocbQosMIBGroups 69 }

cbQosPoliceCfgGroupRev3 OBJECT-GROUP
    OBJECTS         {
                        cbQosPoliceCfgRate,
                        cbQosPoliceCfgBurstSize,
                        cbQosPoliceCfgExtBurstSize,
                        cbQosPoliceCfgConditional
                    }
    STATUS          current
    DESCRIPTION        "Required objects to provide CB QoS objects configuration
        information for POLICE feature
"
    ::= { ciscocbQosMIBGroups 70 }

cbQosC3plAccountCfgGroup OBJECT-GROUP
    OBJECTS         { cbQosC3plAccountFeatureType }
    STATUS          current
    DESCRIPTION        "Required objects to provide c3pl account action
        configuration information (provide drop types) .
"
    ::= { ciscocbQosMIBGroups 71 }

cbQosC3plAccountStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cbQosC3plAccountDropPktOverflow,
                        cbQosC3plAccountDropPkt,
                        cbQosC3plAccountDropPkt64,
                        cbQosC3plAccountDropByteOverflow,
                        cbQosC3plAccountDropByte,
                        cbQosC3plAccountDropByte64,
                        cbQosC3plAccountTailDropPktOverflow,
                        cbQosC3plAccountTailDropPkt,
                        cbQosC3plAccountTailDropPkt64,
                        cbQosC3plAccountTailDropByteOverflow,
                        cbQosC3plAccountTailDropByte,
                        cbQosC3plAccountTailDropByte64
                    }
    STATUS          current
    DESCRIPTION        "Optional objects to provide c3pl account action
        statistics information.
"
    ::= { ciscocbQosMIBGroups 72 }

cbQosSetCfgFrDeGroup OBJECT-GROUP
    OBJECTS         { cbQosSetCfgFrDe }
    STATUS          current
    DESCRIPTION        "Optional object to provide CB QoS objects marking
        configuration information on frame relay header.
"
    ::= { ciscocbQosMIBGroups 73 }

END























                
                
            
			
        
   
Help  |  Feedback