Guest

Tools & Resources

SNMP Object Navigator


CISCO-ISDN-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-ISDN-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    4. SNMPv2-MIB Download  |  Download  |  View Dependencies
    5. IANAifType-MIB Download  |  Download  |  View Dependencies
    6. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    7. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    9. IF-MIB Download  |  Download  |  View Dependencies
    10. CISCO-SMI Download  |  Download  |  View Dependencies
    11. ISDN-MIB Download  |  Download  |  View Dependencies
    12. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    13. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    14. CISCO-ISDN-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-ISDN-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- *****************************************************************
-- CISCO-ISDN-MIB.my:  Cisco ISDN MIB file
--
-- January 1995, Fred Baker, Bibek A. Das
--
-- Copyright (c) 1995-1996, 1999, 2000, 2001, 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-ISDN-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        NOTIFICATION-TYPE,
        Counter32,
        OBJECT-TYPE,
	Integer32
	        FROM SNMPv2-SMI
	DisplayString,
	TimeStamp,
	RowStatus
		FROM SNMPv2-TC
        MODULE-COMPLIANCE,
	OBJECT-GROUP
	        FROM SNMPv2-CONF
        ciscoMgmt
	        FROM CISCO-SMI
        ifIndex
                FROM IF-MIB
        isdnLapdOperStatus,
        isdnSignalingIndex,
        isdnSignalingIfIndex
                FROM ISDN-MIB;
     

ciscoIsdnMib MODULE-IDENTITY
        LAST-UPDATED    "200102090000Z"
	ORGANIZATION	"Cisco Systems, Inc."
	CONTACT-INFO
		"       Cisco Systems
			Customer Service

		Postal: 170 W Tasman Drive
			San Jose, CA  95134
			USA

		   Tel: +1 800 553-NETS

		E-mail: cs-isdn@cisco.com"
	DESCRIPTION		"The MIB module to describe the status of the ISDN 
		 Interfaces on the routers.
"
        REVISION        "200102090000Z"
        DESCRIPTION                "For a call connects, demandNbrLastDuration, 
                 demandNbrClearReason, and demandNbrClearCode 
                 objects are not included in the trap.
"
        REVISION        "200003270000Z"
        DESCRIPTION               "Added demandNbrCNANotification when call rejected with
                channel not available cause code
"

        REVISION        "200002230000Z"
        DESCRIPTION               "Removed an instantiated clause in description for 
                ciscoCallHistoryCallingNumber.
"
        REVISION        "9905070000Z"
        DESCRIPTION               "Added a new trap for PRI layer 2 state changes.
"
        REVISION        "9602210000Z"
        DESCRIPTION               "Add a new object demandNbrCallOrigin.
"
	REVISION        "9508150000Z"
	DESCRIPTION		"Specify a correct (non-negative) range for an index
		object.
"
	REVISION	"9501300000Z"
	DESCRIPTION		"Initial version of Cisco ISDN MIB.
"
	::= { ciscoMgmt 26 }

-- The ISDN hardware interface (BRI or PRI) will be represented
-- by the D channel. This will have an ifType value of basicISDN(20)
-- or primaryISDN(21), refer to RFC 1213. Each  B channel will
-- also be represented in an an entry in the ifTable. The B
-- channels will have an ifType value of other(1).
-- This model will be used while defining objects and tables
-- for management.
-- The ISDN MIB will allow sub-layers. For example, the data transfer
-- over a B channel may take place with PPP encapsulation. While the
-- ISDN MIB will describe the B channel, a media specific MIB for
-- PPP can be used on a layered basis. This will be as per RFC 1573.
-- The isdn call information will be stored in the neighbor table
	
-- Isdn Mib objects definitions

ciscoIsdnMibObjects OBJECT IDENTIFIER ::= { ciscoIsdnMib 1 }

isdnNeighbor OBJECT IDENTIFIER ::= { ciscoIsdnMibObjects 1 }

 
demandNbrTable	OBJECT-TYPE
 	SYNTAX	SEQUENCE OF DemandNbrEntry
        MAX-ACCESS   not-accessible
 	STATUS	current
 	DESCRIPTION 	"The list of neighbors from which the router will accept calls or
 	to which it will place them.
"
       ::= { isdnNeighbor 1 }

demandNbrEntry	OBJECT-TYPE
 	SYNTAX	DemandNbrEntry
 	MAX-ACCESS	not-accessible
 	STATUS	current
 	DESCRIPTION 	"A single Neighbor. This entry is effectively permanent, and contains
 	information describing the neighbor, his permissions, his last call
 	attempt, and his cumulative effects.
"
 	INDEX	{demandNbrPhysIf, demandNbrId }
      ::= { demandNbrTable 1 }

DemandNbrEntry ::=
 SEQUENCE {
 	demandNbrPhysIf		Integer32 (1..2147483647), -- ifIndex value 
							   -- of  the D channel
 	demandNbrId		Integer32 (0..2147483647), -- sequence number
 	demandNbrLogIf		Integer32 (1..2147483647), -- ifIndex value of 
							   -- virtual interface
 	demandNbrName		DisplayString,	-- name of the neighbor
 	demandNbrAddress	DisplayString,	-- Call Address 
 	demandNbrPermission	INTEGER,  -- applicable permissions
 	demandNbrMaxDuration	Integer32 (1..2147483647), -- Max call duration
							   -- in seconds
 	demandNbrLastDuration	Integer32 (1..2147483647), -- Duration of last 
							   -- call
 	demandNbrClearReason	DisplayString,	-- reason last call completed
 	demandNbrClearCode	OCTET STRING,	-- reason last call completed
 	demandNbrSuccessCalls	Counter32,  -- number of completed calls to 
					    -- neighbor
 	demandNbrFailCalls	Counter32,  -- number of failed call attempts
 	demandNbrAcceptCalls	Counter32, -- number of calls from neighbor 
					   -- accepted
 	demandNbrRefuseCalls	Counter32, -- number of calls from neighbor 
					   -- refused
 	demandNbrLastAttemptTime	TimeStamp,  -- sysUpTime of last 
						    -- call attempt
        demandNbrStatus         RowStatus,
        demandNbrCallOrigin     INTEGER
 	}
 
demandNbrPhysIf	OBJECT-TYPE
 	SYNTAX	Integer32 (1..2147483647)
 	MAX-ACCESS	not-accessible
 	STATUS	current
 	DESCRIPTION 	"ifIndex value of the physical interface the neighbor will be
 	called on. On an ISDN interface, this is the ifIndex value of
 	the D channel.
"
        ::= { demandNbrEntry 1 }

demandNbrId	OBJECT-TYPE
 	SYNTAX	Integer32 (0..2147483647)
 	MAX-ACCESS	not-accessible
 	STATUS	current
 	DESCRIPTION 	"arbitrary sequence number associated with the neighbor.
"
        ::= { demandNbrEntry 2 }
 	
demandNbrLogIf	OBJECT-TYPE
 	SYNTAX	Integer32 (1..2147483647)
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"ifIndex value of virtual interface associated with the neighbor.
 	This interface maintains a queue of messages holding for the neighbor
 	awaiting call completion, and all statistics.
"
        ::= { demandNbrEntry 3 }
 	
demandNbrName	OBJECT-TYPE
 	SYNTAX	DisplayString
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"ASCII name of the neighbor.
"
        ::= { demandNbrEntry 4 }
 	
demandNbrAddress	OBJECT-TYPE
 	SYNTAX	DisplayString
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"Call Address  at which the neighbor should be called.
 	Think of this as the set of characters following 'ATDT '
	or the 'phone number' included in a D channel call request.
"
        ::= { demandNbrEntry 5 }
 	
demandNbrPermission	OBJECT-TYPE
 	SYNTAX	INTEGER {	iCanCallHim (1),
 				heCanCallMe (2),
 				weCanCallEachOther (3)
 			}
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"applicable permissions.
"
	DEFVAL { weCanCallEachOther }
        ::= { demandNbrEntry 6 }
 	
demandNbrMaxDuration	OBJECT-TYPE
 	SYNTAX	Integer32 (1..2147483647)
        UNITS      "seconds"
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"Maximum call duration in seconds.
"
	DEFVAL { 2147483647 }
        ::= { demandNbrEntry 7 }
 	
demandNbrLastDuration	OBJECT-TYPE
 	SYNTAX	Integer32 (1..2147483647)
        UNITS      "seconds"
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"Duration of last call in seconds.
"
        ::= { demandNbrEntry 8 }
 	
demandNbrClearReason	OBJECT-TYPE
 	SYNTAX	DisplayString
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"ASCII reason that the last call terminated.
"
        ::= { demandNbrEntry 9 }
 	
demandNbrClearCode	OBJECT-TYPE
 	SYNTAX	OCTET STRING
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"encoded reason for the last call tear down.
"
        ::= { demandNbrEntry 10 }
 	
demandNbrSuccessCalls	OBJECT-TYPE
 	SYNTAX	Counter32
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"number of completed calls to neighbor since system reset.
"
        ::= { demandNbrEntry 11 }
 	
demandNbrFailCalls	OBJECT-TYPE
 	SYNTAX	Counter32
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"Number of call attempts that have failed.
"
        ::= { demandNbrEntry 12 }
 	
demandNbrAcceptCalls	OBJECT-TYPE
 	SYNTAX	Counter32
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"Number of calls accepted from the neighbor.
"
        ::= { demandNbrEntry 13 }
 	
demandNbrRefuseCalls	OBJECT-TYPE
 	SYNTAX	Counter32
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"Number of calls from neighbor that we have refused.
"
        ::= { demandNbrEntry 14 }
 	
demandNbrLastAttemptTime	OBJECT-TYPE
 	SYNTAX	TimeStamp
 	MAX-ACCESS	read-only
 	STATUS	current
 	DESCRIPTION 	"sysUpTime of last call attempt.
"
        ::= { demandNbrEntry 15 }
 	
demandNbrStatus	OBJECT-TYPE
 	SYNTAX	RowStatus
 	MAX-ACCESS	read-create
 	STATUS	current
 	DESCRIPTION 	"Somebody might want to manage the device using SNMP some day...
"
        ::= { demandNbrEntry 16 }

demandNbrCallOrigin OBJECT-TYPE
       SYNTAX  INTEGER {
                originate(1),
                answer(2),
                callback(3)
         }
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION        "Indication of outgoing or incoming call.
"
          ::= { demandNbrEntry 17 }
 

-- Traps related to Connection management

ciscoIsdnMibTrapPrefix OBJECT IDENTIFIER ::= { ciscoIsdnMib 2 }
ciscoIsdnMibTraps OBJECT IDENTIFIER ::= { ciscoIsdnMibTrapPrefix 0 }

demandNbrCallInformation NOTIFICATION-TYPE
 	OBJECTS {
 		demandNbrLogIf,
 		demandNbrName,
 		demandNbrAddress,
 		demandNbrLastDuration,
 		demandNbrClearReason,
 		demandNbrClearCode
 	}
 	STATUS	obsolete
 	DESCRIPTION 	"This trap/inform is sent to the manager whenever a successful 
	call clears, or a failed call attempt is determined to have 
	ultimately failed. In the event that call retry is active, 
	then this is after all retry attempts have failed. However, 
	only one such trap is sent in between successful call
 	attempts; subsequent call attempts result in no trap.
"
     ::= { ciscoIsdnMibTraps 1 } 

demandNbrCallDetails NOTIFICATION-TYPE
        OBJECTS {
                demandNbrLogIf,
                demandNbrName,
                demandNbrAddress,
                demandNbrLastDuration,
                demandNbrClearReason,
                demandNbrClearCode,
                demandNbrCallOrigin
        }
        STATUS  current
        DESCRIPTION        "This trap/inform is sent to the manager whenever a call 
        connects, or  clears, or a failed call attempt is determined to 
        have ultimately failed. In the event that call retry is active, 
        then this is after all retry attempts have failed. However, 
        only one such trap is sent in between successful call
        attempts; subsequent call attempts result in no trap.
         
        Whenever a call connects, demandNbrLastDuration, 
        demandNbrClearReason, and demandNbrClearCode objects are not
        included in the trap.
"
       ::= { ciscoIsdnMibTraps 2 } 

demandNbrLayer2Change NOTIFICATION-TYPE
        OBJECTS {
                ifIndex,
                isdnLapdOperStatus
                }
        STATUS  current
        DESCRIPTION        "This trap/inform is sent to the manager whenever the
        D-channel of an interface changes state.
"
       ::= { ciscoIsdnMibTraps 3 }

demandNbrCNANotification NOTIFICATION-TYPE
        OBJECTS {
                isdnSignalingIfIndex,
                ifIndex
                }
        STATUS  current
        DESCRIPTION        "This trap/inform is sent to the manager whenever the
         an incoming call request is rejected with cause
         'requested circuit/channel not available' (CNA),
         code number 44.

         isdnSignalingIfIndex is the ifIndex value of the interface
         associated with this signaling channel.

         ifIndex is the interface index of the requested bearer channel 
        
"
       ::= { ciscoIsdnMibTraps 4 }

-- conformance information

ciscoIsdnMibConformance	OBJECT IDENTIFIER ::= { ciscoIsdnMib 3 }
ciscoIsdnMibCompliances	OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 1 }
ciscoIsdnMibGroups	OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 2 }


-- compliance statements

ciscoIsdnMibCompliance MODULE-COMPLIANCE
      STATUS	current
      DESCRIPTION		"The compliance statement for entities which implement
		the Cisco ISDN MIB
"
      MODULE	-- this module
		MANDATORY-GROUPS { ciscoIsdnMibGroup }
      ::= { ciscoIsdnMibCompliances 1 }

ciscoIsdnMibComplianceRev1 MODULE-COMPLIANCE
      STATUS  current
      DESCRIPTION               "The compliance statement for entities which implement
               the Cisco ISDN MIB
"
      MODULE  -- this module
               MANDATORY-GROUPS { ciscoIsdnMibGroupRev1 }
      ::= { ciscoIsdnMibCompliances 2 }
 

-- units of conformance

ciscoIsdnMibGroup OBJECT-GROUP
      OBJECTS {
 	demandNbrLogIf,
 	demandNbrName,
 	demandNbrAddress,
 	demandNbrPermission,
 	demandNbrMaxDuration,
 	demandNbrLastDuration,
 	demandNbrClearReason,
 	demandNbrClearCode,
 	demandNbrSuccessCalls,
 	demandNbrFailCalls,
 	demandNbrAcceptCalls,
 	demandNbrRefuseCalls,
 	demandNbrLastAttemptTime,
 	demandNbrStatus
	}
      STATUS	current
      DESCRIPTION	"A collection of objects providing the ISDN MIB capability.
"
      ::= { ciscoIsdnMibGroups 1 }
  
ciscoIsdnMibGroupRev1 OBJECT-GROUP
       OBJECTS {
         demandNbrLogIf,
         demandNbrName,
         demandNbrAddress,
         demandNbrPermission,
         demandNbrMaxDuration,
         demandNbrLastDuration,
         demandNbrClearReason,
         demandNbrClearCode,
         demandNbrSuccessCalls,
         demandNbrFailCalls,
         demandNbrAcceptCalls,
         demandNbrRefuseCalls,
         demandNbrLastAttemptTime,
         demandNbrStatus,
         demandNbrCallOrigin
        }
        STATUS  current
        DESCRIPTION        "A collection of objects providing the call origin capability.
"
        ::= { ciscoIsdnMibGroups 2 }

END





                
                
            
			
        
   
Help  |  Feedback