Guest

Tools & Resources

SNMP Object Navigator


CISCO-REMOTE-ACCESS-MONITOR-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-REMOTE-ACCESS-MONITOR-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    4. CISCO-SMI Download  |  Download  |  View Dependencies
    5. INET-ADDRESS-MIB Download  |  Download  |  View Dependencies
    6. SNMP-FRAMEWORK-MIB Download  |  Download  |  View Dependencies
    7. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    9. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    10. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    11. CISCO-REMOTE-ACCESS-MONITOR-MIB Download  |  Download  | 

More Downloads

None

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- * $Source$
-- *------------------------------------------------------------------
-- * CISCO-REMOTE-ACCESS-MONITOR-MIB.my:  Cisco Remote Access MIB
-- *
-- * May 2003, S Ramakrishnan
-- *
-- * Copyright (c) 2003, 2008 by cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

CISCO-REMOTE-ACCESS-MONITOR-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, 
      OBJECT-TYPE, 
      NOTIFICATION-TYPE,
      Counter32, 
      Counter64, 
      Gauge32, 
      Integer32,
      Unsigned32,
	  zeroDotZero
             FROM SNMPv2-SMI
      TEXTUAL-CONVENTION, 
      TimeStamp,
      TruthValue
             FROM SNMPv2-TC
      MODULE-COMPLIANCE, 
      OBJECT-GROUP, 
      NOTIFICATION-GROUP
             FROM SNMPv2-CONF
      InetAddressType,
      InetAddress
             FROM INET-ADDRESS-MIB
      SnmpAdminString
              FROM SNMP-FRAMEWORK-MIB
      ciscoMgmt 
             FROM CISCO-SMI;

   ciscoRemoteAccessMonitorMIB MODULE-IDENTITY
      LAST-UPDATED "200402030000Z"
      ORGANIZATION "Cisco Systems"
      CONTACT-INFO
         "
          Cisco Systems
          Customer Service

          Postal: 170 W Tasman Drive
                  San Jose, CA  95134
                  USA

             Tel: +1 800 553-NETS
          E-mail: cs-snmp@cisco.com"

 DESCRIPTION   "
   Acronyms and Definitions
    The following acronyms and terms are used in this 
    document:

      IPSec: Secure IP Protocol
  
      VPN:   Virtual Private Network

      RAS:   Remote Access Service

      ISP:   Internet Service Provider.

      LAN:   Local Area Network

      Group: A collection of remote access users grouped
             and managed together as a single entity for
             administrative convenience.

      Session: A Remote Access Session.
      
      SVC:    SSL VPN Client
      
      Webvpn: VPN connection established using web browser.

   Overview of the MIB

    This is a MIB Module for monitoring the structures in Virtual 
    Private Networks based remote access networks. The MIB seeks 
    to create a common model of Remote Access across implementations 
    of the service on layer 2 (PPTP, L2TP, L2F), layer 3 (IPsec) and 
    layer 4 (SSL) virtual private networks. The MIB defines counters 
    and objects of interest to performance/fault monitoring in a 
    way which is independent of the technology of the remote access 
    implementation.

    MIB contains eight major groups of objects which are used 
    to manage Remote Access connections:
     a) Remote Access capacity group
          This section defines metrics to gauge the limits of 
          resources on this device which are critical to RAS 
          service.

     b) Remote Access resource usage group
          This section defines metrics to gauge the usage of 
          resources on this device which are critical to RAS 
          service service.

     c) Current activity and performance of RAS service
          This section defines metrics to gauge the current 
          remote access activity.

     d) Remote Access Service failures
          This section defines metrics to monitor session
          failures and failures of the service itself, measured
          at aggregate level, session level and group level.

     e) Security violations in the Remote Access service
          This section defines metrics which reflect the state 
          of remote access service of interest to Security 
          Operations staff in an enterprise.

     f) Threshold group (allows definition of high water marks)
          This section allows the management entity to define 
          thresholds to set high water marks on critical metrics.

     g) Notifications
          This section defines notifications to signal
          significant events pertaining to the Remote Access
          Service.
   "
   REVISION "200808280000Z"
   DESCRIPTION            "Added crasEmailNumSessions 
	           crasEmailCumulateSessions 
                   crasEmailPeakConcurrentSessions
                   crasIPSecNumSessions 
                   crasIPSecCumulateSessions 
                   crasIPSecPeakConcurrentSessions 
                   crasL2LNumSessions 
		   crasL2LCumulateSessions 
                   crasL2LPeakConcurrentSessions 
                   crasLBNumSessions 
                   crasLBCumulateSessions 
                   crasLBPeakConcurrentSessions
                   crasSVCNumSessions 
  		   crasSVCCumulateSessions 
                   crasSVCPeakConcurrentSessions
                   crasWebvpnNumSessions 
	           crasWebvpnCumulateSessions 
                   crasWebvpnPeakConcurrentSessions objects
	
   
"         
      ::= { ciscoMgmt 392 }

-- Tentative anchor under ciscoMgmt

-- +++++++++++++++++++++++++++++++++++++++++++++++++++
-- Local Textual Conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++
   RasProtocol  ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The protocol immediately underlying the remote 
         access session. 
         
         The value 'other' has been listed to allow for the
         MIB to be supported on proprietary protocols not 
         listed here.
         
"
      SYNTAX INTEGER {
                other(1),
                ipsec(2),
                l2tp(3),
                l2tpoveripsec(4),
                pptp(5),
                l2f(6),
                ssl(7)
             }

   UserAuthenMethod ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The mechanism used to authenticate the user.

         The value 'other' has been listed to allow for the
         MIB to support proprietary authentication methods 
         not listed here.
         
"
      SYNTAX INTEGER {
                none(1),
                other(2),
                radius(3),
                tacacsplus(4),
                kerberos(5),
                local(6),
                ldap(7),
                ntlm(8),
                sdi(9)
             }

   UserAuthorMethod ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The mechanism used to authorize the user.
         The value 'other' has been listed to allow for the
         MIB to support proprietary authorization mechanisms 
         not listed here.
         
"
      SYNTAX INTEGER {
                none(1),
                other(2),
                radius(3),
                tacacsplus(4),
                kerberos(5),
                local(6),
                ldap(7)
             }

   SessionEncrAlgo   ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The encryption algorithm used to secure the remote
         access session.
         
"
      SYNTAX INTEGER {
                none(1),
                des(2),
                des3(3),
                rc4(4),
                rc5(5),
                idea(6),
                cast(7),
                blowfish(8),
                aes(9)
             }

   SessionAuthAlgo      ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The authentication algorithm used by to perform
          packet authentication in the remote access session.

         The value 'other' has been listed to allow for the
         MIB to support packet validation algorithms not 
         listed here.
         
"
      SYNTAX INTEGER{
                none(1),
                other(2),
                hmacMd5(3),
                hmacSha(4)
             }

   SessionCompressionAlgo      ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The compression algorithm used in the remote access
          session.

          The value 'other' has been listed to allow for the
          MIB to support compression not listed here.
         
"
      SYNTAX INTEGER{
                none(1),
                other(2),
                lzs(3)
             }

   SessionStatus  ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The status of a remote access session. 

           initializing: the session is in the process 
                         of being established

           established : the session is established and
                         is ready to carry application
                         traffic. Sessions in this state
                         may also be referred to as 
                         'active' sessions.

           terminating : the session is in the process 
                         of termination.
         
         Objects of this type may be used to terminate an
         established session by setting value of the object 
         to terminating(3). 
         
         Management entity may not write values initializing(1)
         or established(2) onto objects of this type. Doing so 
         would cause the managed entity to return an error
         condition.
         
"
      SYNTAX INTEGER {
                initializing(1),
                established(2),
                terminating(3)
             }

   SessionIndex    ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The type used to index a remote access session.
"
      SYNTAX Integer32 (1..2147483647)

   FailureRecordIndex    ::= TEXTUAL-CONVENTION
      STATUS     current
      DESCRIPTION         "The type used to index failure records in the
         failure archive.
"
      SYNTAX Unsigned32 (1..4294967295)

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Remote Access MIB Object Groups
--
-- This MIB module contains the following groups:
-- 1) Remote Access capacity group 
-- 2) Remote Access resource usage group 
-- 3) Current activity and performance
-- 4) Failures
-- 5) Security violations
-- 6) Threshold group
-- 7) Notifications:
-- 7a)  Controls
-- 7b)  Notification definitions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   ciscoRasMonitorMIBNotifs  OBJECT IDENTIFIER
              ::= { ciscoRemoteAccessMonitorMIB 0}

   ciscoRasMonitorMIBObjects OBJECT IDENTIFIER
              ::= {ciscoRemoteAccessMonitorMIB 1}

   ciscoRasMonitorMIBConform OBJECT IDENTIFIER
              ::= { ciscoRemoteAccessMonitorMIB 2 }

   crasCapacity OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 1 }
   crasResourceUsage           OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 2 }
   crasActivity            OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 3 }
   crasFailures           OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 4 }
   crasSecurity           OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 5 }
   crasThresholds         OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 6 }
   crasNotifCntl         OBJECT IDENTIFIER  
                  ::= { ciscoRasMonitorMIBObjects 7 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access capacity group.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasMaxSessionsSupportable OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The maximum number of remote access sessions
         that may be supported on this device.

         If the device imposes no arbitrary limit on the
         maximum number of sessions, it should return a 
         value of 0.
"
      ::= { crasCapacity 1 }

   crasMaxUsersSupportable OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Users"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The maximum number of remote access users
         for whom Remote Access sessions may be supported on 
         this device.

         If the device imposes no arbitrary limit on the
         maximum number of users, it should return a 
         value of 0.
"
      ::= { crasCapacity 2 }

   crasMaxGroupsSupportable OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Groups"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The maximum number of remote access groups
         that may be defined on this device. 'Group'
         refers to a collection of users grouped together
         for administrative convenience.

         If the device imposes no arbitrary limit on
         the maximum number of groups, it should return
         a value of 0.
"
      ::= { crasCapacity 3 }

   crasNumCryptoAccelerators OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Users"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The maximum number of hardware crypto accelerators
         which can be installed on this device to support
         remote access sessions. 'cryptoaccelerator' denotes
         a hardware/software entity which the managed entity 
         uses to offload some or all computations pertaining 
         to cryptographic operations.

         If the device imposes no arbitrary limit on the
         number of crypto accelerators to support Remote Access
         function, it should return a value of 0.
"
      ::= { crasCapacity 4 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access resource usage group.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasGlobalBwUsage OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "MBytes/second"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The average bandwidth used by all the active 
         remote access sessions.
"
      ::= { crasResourceUsage 1 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access activity usage group.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasNumSessions OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active sessions.

         A session is a connection terminating on the managed 
         entity which has been established to provide remote 
         access connectivity to a user. A session is said to be 
         'active' if it is ready to carry application traffic
         between the user and the managed entity. A session which 
         is not active is defined to be 'dormant'.
         
"

      ::= { crasActivity 1 }

   crasNumPrevSessions OBJECT-TYPE
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of remote access sessions which were 
         previously active but which where since terminated.
         
         Measured since the last reboot of the device.
"
      ::= { crasActivity 2 }

   crasNumUsers OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "Users"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of users who have active sessions.
         
"
      ::= { crasActivity 3 }

   crasNumGroups OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "Groups"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of user groups whose members have
         active sessions.
"
      ::= { crasActivity 4 }

   crasGlobalInPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets received by all
         currently and previously active remote access 
         sessions.
"
      ::= { crasActivity 5 }

   crasGlobalOutPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets transmitted by all
         currently and previously active remote access 
         sessions.
"
      ::= { crasActivity 6 }

   crasGlobalInOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of octets received by all currently
          and previously active remote access sessions.
          This value is accumulated BEFORE determining whether 
          or not the packet should be decompressed.
         
"
      ::= { crasActivity 7 }

   crasGlobalInDecompOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of decompressed octets received 
         by all current and previous remote access sessions.  
         This value is accumulated AFTER the packet is 
         decompressed. If compression is not being used, 
         this value will match the value of crasGlobalInOctets. 
         
"
      ::= { crasActivity 8 }

   crasGlobalOutOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of octets transmitted by all 
          currently and previously active remote access 
          sessions.

         This value is accumulated AFTER determining 
         whether or not the packet should be compressed.  
        
"
      ::= { crasActivity 9 }

   crasGlobalOutUncompOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The total number of uncompressed octets sent 
       by all current and previous remote access sessions.  
       This value is accumulated BEFORE the packet is 
       compressed. If compression is not being used, this 
       value will match the value of crasGlobalOutOctets. 
       
"
      ::= { crasActivity 10 }

    crasGlobalInDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets which were dropped
         during receive processing by all currently and 
         previously active remote access sessions.
"
      ::= { crasActivity 11 }

    crasGlobalOutDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets which were
         dropped during receive processing by all
         currently and previously active remote access 
         sessions.
"
      ::= { crasActivity 12 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access session table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasSessionTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CrasSessionEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "This table lists all the currently active sessions.
          For each session, it lists the attributes (user, 
          group, protocol, security), statistics (packet and
          octets) and status.
"
     ::= { crasActivity 21 }

   crasSessionEntry OBJECT-TYPE
      SYNTAX CrasSessionEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION            "Each entry contains the attributes, statistics and
             status of an active session.
"
      INDEX { crasUsername,
              crasSessionIndex}
      ::= { crasSessionTable 1}

   CrasSessionEntry ::= SEQUENCE {
      crasUsername                     SnmpAdminString,
      crasGroup                        SnmpAdminString,
      crasSessionIndex                 SessionIndex,
      crasAuthenMethod                 UserAuthenMethod,
      crasAuthorMethod                 UserAuthorMethod,
      crasSessionDuration              Counter32,
      crasLocalAddressType             InetAddressType,
      crasLocalAddress                 InetAddress,
      crasISPAddressType               InetAddressType,
      crasISPAddress                   InetAddress,
      crasSessionProtocol              RasProtocol,
      crasProtocolElement              OBJECT IDENTIFIER,
      crasSessionEncryptionAlgo        SessionEncrAlgo,
      crasSessionPktAuthenAlgo         SessionAuthAlgo,
      crasSessionCompressionAlgo       SessionCompressionAlgo,
      crasHeartbeatInterval            Unsigned32,
      crasClientVendorString           SnmpAdminString,
      crasClientVersionString          SnmpAdminString,
      crasClientOSVendorString         SnmpAdminString,
      crasClientOSVersionString        SnmpAdminString,
      --
      crasPrimWINSServerAddrType       InetAddressType,
      crasPrimWINSServer               InetAddress,
      crasSecWINSServerAddrType        InetAddressType,
      crasSecWINSServer                InetAddress,
      crasPrimDNSServerAddrType        InetAddressType,
      crasPrimDNSServer                InetAddress,
      crasSecDNSServerAddrType         InetAddressType,
      crasSecDNSServer                 InetAddress,
      crasDHCPServerAddrType           InetAddressType,
      crasDHCPServer                   InetAddress,
      --
      crasSessionInPkts                Counter64,
      crasSessionOutPkts               Counter64,
      crasSessionInDropPkts            Counter64,
      crasSessionOutDropPkts           Counter64,
      crasSessionInOctets              Counter64,
      crasSessionOutOctets             Counter64,
      crasSessionState                 SessionStatus
      --
   }

   crasUsername OBJECT-TYPE
      SYNTAX SnmpAdminString (SIZE(0..128))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "The name of the user associated with this remote 
          access session.
"
      ::= { crasSessionEntry 1 }

   crasGroup OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The name of the user group to which this remote 
          access session belongs.
"
      ::= { crasSessionEntry 2 }

   crasSessionIndex OBJECT-TYPE
      SYNTAX SessionIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION       "Unique index to distinguish between multiple 
       Remote Access Sessions associated with the same 
       user. 

       The value of crasSessionIndex must increase monotonically
       till it wraps. An implementation may choose to wrap this 
       index before the value of 2147483647. 
       
"
      ::= { crasSessionEntry 3 }


   crasAuthenMethod OBJECT-TYPE
      SYNTAX UserAuthenMethod
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The method used to authenticate the user prior to
          establishing the session.
"
      ::= { crasSessionEntry 4 }

   crasAuthorMethod OBJECT-TYPE
      SYNTAX UserAuthorMethod
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The method used to authorize the user prior to
          establishing the session.
"
      ::= { crasSessionEntry 5 }

   crasSessionDuration OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of seconds elapsed since this session
          was established.
"
      ::= { crasSessionEntry 6 }

   crasLocalAddressType OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 'crasLocalAddress'.
         
"
      ::= { crasSessionEntry 7 }

   crasLocalAddress OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address assigned to the client of this session 
          in the private network assigned by the managed entity.
"
      ::= { crasSessionEntry 8 }

   crasISPAddressType   OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 'crasISPAddress'.
         
"
      ::= { crasSessionEntry 9 }

   crasISPAddress OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The IP address of the peer (client) assigned by the ISP.
       This is the address of the client device in the public
       network.
"
     ::= { crasSessionEntry 10 }

   crasSessionProtocol OBJECT-TYPE
      SYNTAX RasProtocol
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The protocol underlying this remote access session.
"
      ::= { crasSessionEntry 11 }

   crasProtocolElement  OBJECT-TYPE
       SYNTAX      OBJECT IDENTIFIER
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION        "A reference to MIB definitions specific to the protocol
		underlying corresponding to the session or tunnel
		used to realized the remote access session corresponding 
		to this conceptual row. 

        For instance, if this remote access session is based on
		IPsec, then this object must contain the complete
		instance identifier of the IPsec tunnel corresponding 
		to this remote access session.

        If no MIB definitions specific to the underlying
		protocol are available, the value should be set to the 
		OBJECT IDENTIFIER { 0 0 }.
        
"
    DEFVAL { zeroDotZero }
      ::= { crasSessionEntry 12 }

   crasSessionEncryptionAlgo OBJECT-TYPE
      SYNTAX SessionEncrAlgo
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The algorithm used by this remote access session to
       encrypt its payload.
"
      ::= { crasSessionEntry 13 }

   crasSessionPktAuthenAlgo OBJECT-TYPE
      SYNTAX SessionAuthAlgo
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The algorithm used by this remote access session to
       to validate packets.
"
      ::= { crasSessionEntry 14 }

   crasSessionCompressionAlgo OBJECT-TYPE
      SYNTAX SessionCompressionAlgo
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The algorithm used by this remote access session to
       compress packets.
"
      ::= { crasSessionEntry 15 }

   crasHeartbeatInterval OBJECT-TYPE
      SYNTAX Unsigned32 (0..4294967295)
      UNITS "Seconds"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The interval in seconds between two successive heartbeats
          employed by this session. Value of 0 denotes that no
          heartbeat is used.
"
      ::= { crasSessionEntry 16 }

   crasClientVendorString           OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The string identifying the vendor of the client 
         application initiating this Remote Access session.
"
      ::= { crasSessionEntry 17 }

   crasClientVersionString          OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The string identifying the version of the of the client 
         application initiating the Remote Access session.
         This can be used by the administrator to identify which 
         users are running unsupported client versions.
"
      ::= { crasSessionEntry 18 }

   crasClientOSVendorString         OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The string identifying the vendor of the operating system 
         on which the client application initiating the Remote Access 
         Session is running.
"
      ::= { crasSessionEntry 19 }

   crasClientOSVersionString        OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The string identifying the version of the operating 
         system of the entity which initiated this Remote Access 
         session.
"
      ::= { crasSessionEntry 20 }

   crasPrimWINSServerAddrType       OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
          'crasPrimWINSServer'.
         
"
      ::= { crasSessionEntry 21 }

   crasPrimWINSServer OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address of the primary WINS server assigned 
          managed entity to this client session.
"
      ::= { crasSessionEntry 22 }

   crasSecWINSServerAddrType        OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
          'crasSecWINSServer'.
         
"
      ::= { crasSessionEntry 23 }

   crasSecWINSServer OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address of the secondary WINS server assigned 
         by the managed entity to this client session.
"
      ::= { crasSessionEntry 24 }

   crasPrimDNSServerAddrType        OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
          'crasPrimDNSServer'.
         
"
      ::= { crasSessionEntry 25 }

   crasPrimDNSServer OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address of the primary DNS server assigned by 
          the managed entity to this client session.
"
      ::= { crasSessionEntry 26 }

   crasSecDNSServerAddrType         OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
          'crasSecDNSServer'.
         
"
      ::= { crasSessionEntry 27 }

   crasSecDNSServer OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address of the secondary DNS server assigned
          by the managed entity to this client session.
"
      ::= { crasSessionEntry 28 }

   crasDHCPServerAddrType           OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
          'crasDHCPServer'.
         
"
      ::= { crasSessionEntry 29 }

   crasDHCPServer OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The IP address of the DHCP server assigned by the 
          managed entity to this client session.
"
      ::= { crasSessionEntry 30 }

   crasSessionInPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets received by this Remote
         Access session.
"
      ::= { crasSessionEntry 31 }

   crasSessionOutPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets transmitted by this 
         Remote Access Session.
"
      ::= { crasSessionEntry 32 }

    crasSessionInDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets received for processing
         on this session which were dropped by the managed entity.
"
      ::= { crasSessionEntry 33 }

    crasSessionOutDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of outgoing packets on this session
         which were dropped during transmit processing by the 
         managed entity.
"
      ::= { crasSessionEntry 34 }

   crasSessionInOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The total number of octets received by this Remote
       Access Session.

       This value is accumulated BEFORE determining whether 
	   or not the packet should be decompressed.
       
"
      ::= { crasSessionEntry 35 }

   crasSessionOutOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The total number of octets transmitted by this Remote
       Access Session.

       This value is accumulated AFTER determining whether
       or not the packet should be compressed.
       
"
      ::= { crasSessionEntry 36 }

   crasSessionState     OBJECT-TYPE
      SYNTAX SessionStatus
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION         "The state of the remote access session corresponding
         to this conceptual row. 

		 The management entity may use this object to terminate 
		 an established session by setting value of the object
         to 'terminating'.
		 
"
      ::= { crasSessionEntry 37 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access session table organized by user group
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasActGroupTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CrasActGroupEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "This table lists all the currently active remote
         access user groups. For each group, it lists the 
         attributes (group, aggregate activity, aggregate 
         traffic), and status.
"
     ::= { crasActivity 22 }

   crasActGroupEntry OBJECT-TYPE
      SYNTAX CrasActGroupEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION            "Each entry contains the attributes, statistics and
             status of an active session.
"
      INDEX { crasActGrpName }
      ::= { crasActGroupTable 1}

   CrasActGroupEntry ::= SEQUENCE {
      crasActGrpName                  SnmpAdminString,
      crasActGrNumUsers               Integer32,
      crasActGrpInPkts                Counter64,
      crasActGrpOutPkts               Counter64,
      crasActGrpInDropPkts            Counter64,
      crasActGrpOutDropPkts           Counter64,
      crasActGrpInOctets              Counter64,
      crasActGrpOutOctets             Counter64
   }

   crasActGrpName OBJECT-TYPE
      SYNTAX SnmpAdminString (SIZE(0..64))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "The name of the active user group corresponding to 
         this entry.
"
      ::= { crasActGroupEntry 1 }

   crasActGrNumUsers OBJECT-TYPE
      SYNTAX Integer32 (1..2147483647)
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of users in this group currently connected
         to the managed device.
"
      ::= { crasActGroupEntry 2 }

   crasActGrpInPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets received by this session.
"
      ::= { crasActGroupEntry 3 }

   crasActGrpOutPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets transmitted by this session.
"
      ::= { crasActGroupEntry 4 }

    crasActGrpInDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of packets dropped by this session 
          which were received for processing.
"
      ::= { crasActGroupEntry 5 }

    crasActGrpOutDropPkts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Packets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of outgoing packets which were
         dropped during transmit processing by this session.
"
      ::= { crasActGroupEntry 6 }

   crasActGrpInOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of octets received by this session.
"
      ::= { crasActGroupEntry 7 }

   crasActGrpOutOctets OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The total number of octets transmitted by this session.
"
      ::= { crasActGroupEntry 8 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access session activity global statistics.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasEmailNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active Email proxy sessions.
"
      ::= { crasActivity 23 }


   crasEmailCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative Email proxy sessions since system up.
"
      ::= { crasActivity 24 }

   crasEmailPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent Email proxy sessions since system up.
"
      ::= { crasActivity 25 }

   crasIPSecNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active IPSec sessions.
"
      ::= { crasActivity 26 }


   crasIPSecCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative IPSec sessions since system up.
"
      ::= { crasActivity 27 }

   crasIPSecPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent Email proxy sessions since system up.
"
      ::= { crasActivity 28 }

   crasL2LNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active LAN to LAN sessions.
"
      ::= { crasActivity 29 }


   crasL2LCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative LAN to LAN sessions since system up.
"
      ::= { crasActivity 30 }

   crasL2LPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent LAN to LAN sessions since system up.
"
      ::= { crasActivity 31 }

   crasLBNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active Load Balancing sessions.
"
      ::= { crasActivity 32 }


   crasLBCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative Load Balancing sessions since system up.
"
      ::= { crasActivity 33 }

   crasLBPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent Load Balancing sessions since system up.
"
      ::= { crasActivity 34 }

   crasSVCNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active SVC sessions.
"
      ::= { crasActivity 35 }


   crasSVCCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative SVC sessions since system up.
"
      ::= { crasActivity 36 }

   crasSVCPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent SVC sessions since system up.
"
      ::= { crasActivity 37 }

   crasWebvpnNumSessions OBJECT-TYPE 
      SYNTAX Gauge32 
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of currently active Webvpn sessions.
"
      ::= { crasActivity 38 }


   crasWebvpnCumulateSessions OBJECT-TYPE 
      SYNTAX Counter32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of cumulative Webvpn sessions since system up.
"
      ::= { crasActivity 39 }

   crasWebvpnPeakConcurrentSessions OBJECT-TYPE 
      SYNTAX Unsigned32
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of peak concurrent Webvpn sessions since system up.
"
      ::= { crasActivity 40 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Remote Access Failures Group
--
-- This group consists of:
-- 1) Remote Access global failures
-- 2) Remote Access session failures
-- 3) Remote Access Group failures
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The global failures group
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

   crasFailuresGlobals OBJECT IDENTIFIER 
                    ::= { crasFailures 1 }

   crasNumTotalFailures OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of attempts to establish sessions which 
         failed, since the last reboot of the managed device.
"
      ::= { crasFailuresGlobals 1 }

   crasNumDeclinedSessions OBJECT-TYPE
      SYNTAX Unsigned32 (0..4294967295)
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of session setup attempts, counted since
         the last time the notification 
         'ciscoRasTooManyFailedAuths' was issued, which were 
         declined due to authentication or authorization 
         failure.
         
"
      ::= { crasFailuresGlobals 2 }

   crasNumSetupFailInsufResources OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of session setup attempts that failed
         due to insufficient resources.
"
      ::= { crasFailuresGlobals 3 }

   crasNumAbortedSessions OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of sessions which were successfully
         setup but were since terminated abnormally.
"
      ::= { crasFailuresGlobals 4 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Failure Global Control Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasFailGlobalCntl  OBJECT IDENTIFIER    
                   ::= {  crasFailures 2 }

   crasFailTableSize  OBJECT-TYPE
      SYNTAX Unsigned32 (0..4294967295)
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION         "The window size of the Remote Access Failure tables.

          The failure tables for session and group failures 
          maintain only the last  crasFailTableSize number of 
          failure records. A value of 0 for this MIB variable
          indicates that archiving of the failures is disabled.

          An implementation may choose suitable minimum and 
          maximum values for this element based on the local 
          policy and available resources. If an SNMP SET request 
          specifies a value outside this window for this element, 
          a BAD VALUE may be returned.
"

      ::= { crasFailGlobalCntl 1 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Remote Access Service failure history
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasSessFailures OBJECT IDENTIFIER 
                    ::= { crasFailures 3 }


   crasSessFailTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CrasSessFailEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION       "
         This table records the last 'N' session failures,
         where 'N' is the value of the MIB element 
         'crasFailTableSize' defined earlier. 
         
         A failure could be a failure to establish a session 
         ('setup' failure) or a failure of a session after it 
         was established ('operational' failure).
       "
      ::= { crasSessFailures 1 }

   crasSessFailEntry OBJECT-TYPE
      SYNTAX CrasSessFailEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "Each entry contains the attributes associated with
          a remote access session failure.
"
      INDEX { crasSessFailIndex }
      ::= { crasSessFailTable 1 }

   CrasSessFailEntry ::= SEQUENCE {
      crasSessFailIndex                FailureRecordIndex,
      crasSessFailUsername             SnmpAdminString,
      crasSessFailGroupname            SnmpAdminString,
      crasSessFailType                 INTEGER,
      crasSessFailReason               INTEGER,
      crasSessFailTime                 TimeStamp,
      crasSessFailSessionIndex         SessionIndex,
      crasSessFailISPAddrType          InetAddressType,
      crasSessFailISPAddr              InetAddress,
      crasSessFailLocalAddrType        InetAddressType,
      crasSessFailLocalAddr            InetAddress
   }

   crasSessFailIndex OBJECT-TYPE
      SYNTAX FailureRecordIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "The index of the session failure table. 
          The value of the index is a number which 
          begins at one and is incremented with each 
          session failure. The value of this object will 
          wrap at 4,294,967,295.
"
      ::= { crasSessFailEntry 1 }

   crasSessFailUsername OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The name of the user associated with this failed 
         remote access session.
"
      ::= { crasSessFailEntry 2 }

   crasSessFailGroupname OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The name of the user group to which this failed
          remote access session belongs.
"
      ::= { crasSessFailEntry 3 }

   crasSessFailType OBJECT-TYPE
      SYNTAX INTEGER{
               setupFailure(1),
               operationalFailure(2)
             }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the failure:
           1 = failure occurred during session setup
           2 = failed occurred after the session was setup 
               successfully.
         
"
      ::= { crasSessFailEntry 4 }

   crasSessFailReason OBJECT-TYPE
      SYNTAX INTEGER{
               other(1),
               internalError(2),
               authenticationFailure(3),
               authorizationFailure(4),
               sysCapExceeded(5),
               peerAbortRequest(6),
               peerLost(7),
               operRequest(8)
             }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The reason for the failure.  Possible reasons 
         include:
           1 = other (error which cannot be classified in 
               any of the types listed below).
           2 = internal error occurred
           3 = failed to authenticate the peer/user
           4 = failed to authorize the peer/user
           5 = system capacity exceeded (memory, cpu, max 
               users etc)
           6 = peer requested to abort the session or the 
               setup
           7 = lost peer's heartbeat
           8 = local management request.
"
      ::= { crasSessFailEntry 5 }

   crasSessFailTime OBJECT-TYPE
      SYNTAX TimeStamp
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The value of the MIB element 'sysUpTime' 
         at the time of the failure.
"
      ::= { crasSessFailEntry 6 }

   crasSessFailSessionIndex OBJECT-TYPE
      SYNTAX SessionIndex
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The index of the session which failed (in case 
       this was an operational failure). In case of setup 
       failures (where the value of 'crasSessFailType' of 
       this conceptual row is 'operationalFailure'), the 
       value of this object is undefined and should not be 
       processed.
"
      ::= { crasSessFailEntry 7 }

   crasSessFailISPAddrType OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
         'crasSessFailISPAddr'.
         
"
      ::= { crasSessFailEntry 8 }

   crasSessFailISPAddr  OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The public address of the peer.
"
      ::= { crasSessFailEntry 9 }

   crasSessFailLocalAddrType OBJECT-TYPE
      SYNTAX InetAddressType
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The type of the address returned in 
         'crasSessFailLocalAddr'.
         
"
      ::= { crasSessFailEntry 10 }

   crasSessFailLocalAddr  OBJECT-TYPE
      SYNTAX InetAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The address assigned to the peer by the local
         address management mechanism. In case no address
         was assigned to the peer when the failure occurred,
         this MIB variable would contain the IPv4 address
         value 0.0.0.0
"
      ::= { crasSessFailEntry 11 }


   crasFailLastFailIndex  OBJECT-TYPE
      SYNTAX FailureRecordIndex
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The value of column 'crasSessFailIndex'
         corresponding to the last row added to the 
         crasSessFailTable.

         The value of this object is undefined and should 
         not be processed by the management entity if the 
         value of the object 'crasFailTableSize' is 0.
         
"
      ::= { crasSessFailures 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Remote Access session failure history, catalogued by 
-- user group
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

   crasGroupFailures       OBJECT IDENTIFIER 
                   ::= { crasFailures 4 }

   crasGrpFailTable OBJECT-TYPE
      SYNTAX SEQUENCE OF CrasGrpFailEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION       "This table records the last 'N' occurrences of 
       failures (setup or operational) per user group,
       where 'N' is the value of the MIB element 
       'crasFailTableSize' defined earlier.

       When 'N' entries have been created, the failure 
       information about a new user group must be created by 
       deleting the oldest entry in this table.
       
"
      ::= { crasGroupFailures 1 }

   crasGrpFailEntry OBJECT-TYPE
      SYNTAX CrasGrpFailEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION       "Each entry contains the summary of failures for a 
       specific user group.
"
      INDEX { crasGrpFailGroupname }
      ::= { crasGrpFailTable 1 }

   CrasGrpFailEntry ::= SEQUENCE {
      crasGrpFailGroupname            SnmpAdminString,
      crasGrpFailNumFailAuths         Counter64,
      crasGrpFailNumResourceFailures  Counter64,
      crasGrpFailNumDeclined          Counter64,
      crasGrpFailNumTerminatedMgmt    Counter64,
      crasGrpFailNumTerminatedOther   Counter64
   }

   crasGrpFailGroupname OBJECT-TYPE
      SYNTAX SnmpAdminString (SIZE(0..64))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION         "The name of the user group to which this failure 
         record corresponds.

         This is the index of the group failure table.
"
      ::= { crasGrpFailEntry 1 }

   crasGrpFailNumFailAuths OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The number of sessions belonging to this group which
          failed authentication; counted since last reboot.
"
      ::= { crasGrpFailEntry 2 }

   crasGrpFailNumResourceFailures OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The number of session setup attempts which failed due 
       to insufficient resources.
"
      ::= { crasGrpFailEntry 3 }

   crasGrpFailNumDeclined OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The number of session setup attempts which were declined
       by the managed entity due to local policy. These would 
       include sessions which were denied due to rate control
       settings.
"
      ::= { crasGrpFailEntry 4 }

   crasGrpFailNumTerminatedMgmt OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The number of established sessions which were terminated 
       by explicit management action. The termination may have 
       been triggered locally or based on a request from the peer.
"
      ::= { crasGrpFailEntry 5 }

   crasGrpFailNumTerminatedOther OBJECT-TYPE
      SYNTAX Counter64
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION        "The number of established sessions which were 
        terminated due to insufficient reasons, internal error 
        or other reasons not caused by management action.
"
      ::= { crasGrpFailEntry 6 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- RAS Security Group
--
-- This group consists of:
-- 1) RAS security global counters
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

   crasSecurityGlobals OBJECT IDENTIFIER 
                    ::= { crasSecurity 1 }

   crasNumDisabledAccounts OBJECT-TYPE
      SYNTAX Counter64
      UNITS "Users"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION         "The total number of user accounts which were 
         disabled due to repeated login failures.
"
      ::= { crasSecurityGlobals 1 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- RAS Thrshold Group
--
-- This group consists of threshold values for RAS parameters
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasThrMaxSessions OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Sessions"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION        "The maximum number of sessions which are successfully 
        setup after which the managed entity should alert the 
        network management entity using the notification
        'ciscoRasTooManySessions', if the notification has been
        enabled.

        A value of 0 indicates that the threshold has not been 
        set.
"
      DEFVAL { 0 }
      ::= { crasThresholds 1 }

   crasThrMaxFailedAuths OBJECT-TYPE
      SYNTAX Unsigned32 (0..4294967295)
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The value of object 'crasNumDeclinedSessions' at
       which the managed entity should alert the network 
       management entity using the notification 
       'ciscoRasTooManyFailedAuths', if the notification 
       has been enabled.

        A value of 0 indicates that the threshold has not been 
        set.
"
      DEFVAL { 4294967295 }
      ::= { crasThresholds 2 }

   crasThrMaxThroughput OBJECT-TYPE
      SYNTAX Integer32 (0..2147483647)
      UNITS "Octets Per Second"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION       "The highest throughput of the Remote Access Service at 
       which the managed entity should alert the network management 
       entity using the notification 'ciscoRasTooHighThroughput', 
       if the notification has been enabled. 
       
       The notification is disabled till the value of the 
       aggregate throughput of the managed entity drops below 
       the value of this object.

       A value of 0 indicates that the threshold has not been 
       set.
"
      DEFVAL { 0 }
      ::= { crasThresholds 3 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notification Control Group
--
-- This group of objects controls the sending of 
-- Remote Access MIB TRAPs.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   crasCntlTooManySessions OBJECT-TYPE
      SYNTAX TruthValue
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION         "This object defines the administrative state of 
         sending the trap to signal the violation of the 
         Max session threshold.
"
      DEFVAL { false }
      ::= { crasNotifCntl 1 }

   crasCntlTooManyFailedAuths OBJECT-TYPE
      SYNTAX TruthValue
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION         "This object defines the administrative state of 
         sending the trap to signal the violation of the 
         Max authentication failure count threshold.
"
      DEFVAL { false }
      ::= { crasNotifCntl 2 }

   crasCntlTooHighThroughput OBJECT-TYPE
      SYNTAX TruthValue
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION         "This object defines the administrative state of 
         sending the trap to signal the violation of the 
         Max throughput threshold.
"
      DEFVAL { false }
      ::= { crasNotifCntl 3 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Cisco Remote Access Notifications - TRAPs
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   ciscoRasTooManySessions NOTIFICATION-TYPE
      OBJECTS {
                crasNumSessions,
                crasNumUsers,
                crasMaxSessionsSupportable,
                crasMaxUsersSupportable,
                crasThrMaxSessions
              }
      STATUS  current
      DESCRIPTION         "This notification is generated when the managed entity
          detects that the number of sessions established exceeds 
          the set threshold crasThrMaxSessions.

          Once the notification has been issued, further 
          notifications are suppressed till the value returns 
          below the specified threshold.
"
      ::= { ciscoRasMonitorMIBNotifs 1 }

   ciscoRasTooManyFailedAuths NOTIFICATION-TYPE
      OBJECTS {
                crasNumDeclinedSessions,
                crasThrMaxFailedAuths
              }
      STATUS  current
      DESCRIPTION         "This notification is generated when the managed entity
          detects that the number of login attempts (over all 
          users) exceeds the set threshold for throughput 
          (crasThrMaxFailedAuths).

          Once the notification has been issued, further 
          notifications are suppressed till the value returns 
          below the specified threshold.
"
      ::= { ciscoRasMonitorMIBNotifs 2 }

   ciscoRasTooHighThroughput NOTIFICATION-TYPE
      OBJECTS {
                crasGlobalInOctets,
                crasGlobalOutOctets,
                crasThrMaxThroughput
              }
      STATUS  current
      DESCRIPTION       "This notification is generated when the managed entity
       detects that the current throughput of the device exceeds
       the set threshold for throughput (crasThrMaxThroughput).

       Once the notification has been issued, further 
       notiifcations are suppressed till the value returns 
       below the specified threshold.
"
      ::= { ciscoRasMonitorMIBNotifs 3 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance Information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   ciscoRasMonitorMIBCompliances   OBJECT IDENTIFIER 
                   ::= { ciscoRasMonitorMIBConform 1 }

   ciscoRasMonitorMIBGroups        OBJECT IDENTIFIER 
                   ::= { ciscoRasMonitorMIBConform 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Compliance Statements
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   ciscoRasMonitorMIBCompliance       MODULE-COMPLIANCE
      STATUS      deprecated
      DESCRIPTION        "The compliance statement for SNMP entities
         the Cisco Remote Access Monitoring MIB.
"

      MODULE -- this module
        MANDATORY-GROUPS  { 
                     ciscoRasCapacityGroup,
                     ciscoRasResourceUsageGroup,
                     ciscoRasActivityGroup,
                     ciscoRasMandatoryFailureGroup
                     }

        GROUP  ciscoRasGrpActivityGroup
        DESCRIPTION               "This group is optional.
"

        GROUP  ciscoRasOptionalFailureGroup
        DESCRIPTION               "This group is optional.
"

        GROUP  ciscoRasSecurityGroup
        DESCRIPTION               "This group is optional.
"

        GROUP  ciscoRasThresholdsGroup
        DESCRIPTION               "This group is optional.
"

        GROUP  ciscoRasNotificationsGroup
        DESCRIPTION               "This group is mandatory if and only if 
               the SNMP agent on the managed entity 
               implements the group 
               'ciscoRasThresholdsGroup'.
"

        GROUP  ciscoRasNotificationCntlGroup
        DESCRIPTION               "This group is mandatory if and only if 
               the SNMP agent on the managed entity 
               implements the group 
               'ciscoRasNotificationsGroup'.
"

        OBJECT   crasSessionState
        MIN-ACCESS read-only
        DESCRIPTION          "Write access is not required.
"


        OBJECT   crasCntlTooManySessions
        MIN-ACCESS read-only
        DESCRIPTION          "Write access is not required.
"

        OBJECT   crasCntlTooManyFailedAuths
        MIN-ACCESS read-only
        DESCRIPTION          "Write access is not required.
"

        OBJECT   crasCntlTooHighThroughput
        MIN-ACCESS read-only
        DESCRIPTION          "Write access is not required.
"

        ::= { ciscoRasMonitorMIBCompliances 1 }

   ciscoRasMonitorMIBComplianceRev1	      MODULE-COMPLIANCE
      STATUS	  current
      DESCRIPTION	"The compliance	statement for SNMP entities
	 the Cisco Remote Access Monitoring MIB.
"

      MODULE --	this module
	MANDATORY-GROUPS  {
		     ciscoRasCapacityGroup,
		     ciscoRasResourceUsageGroup,
		     ciscoRasActivityGroup,
	             ciscoRasActivityGroupRev1, 
		     ciscoRasMandatoryFailureGroup
		     }

	GROUP  ciscoRasGrpActivityGroup
	DESCRIPTION	       "This group is optional.
"

	GROUP  ciscoRasOptionalFailureGroup
	DESCRIPTION	       "This group is optional.
"

	GROUP  ciscoRasSecurityGroup
	DESCRIPTION	       "This group is optional.
"

	GROUP  ciscoRasThresholdsGroup
	DESCRIPTION	       "This group is optional.
"

	GROUP  ciscoRasNotificationsGroup
	DESCRIPTION	       "This group is mandatory	if and only if
	       the SNMP	agent on the managed entity
	       implements the group
	       'ciscoRasThresholdsGroup'.
"

	GROUP  ciscoRasNotificationCntlGroup
	DESCRIPTION	       "This group is mandatory	if and only if
	       the SNMP	agent on the managed entity
	       implements the group
	       'ciscoRasNotificationsGroup'.
"

	OBJECT	 crasSessionState
	MIN-ACCESS read-only
	DESCRIPTION	  "Write access	is not required.
"


	OBJECT	 crasCntlTooManySessions
	MIN-ACCESS read-only
	DESCRIPTION	  "Write access	is not required.
"

	OBJECT	 crasCntlTooManyFailedAuths
	MIN-ACCESS read-only
	DESCRIPTION	  "Write access	is not required.
"

	OBJECT	 crasCntlTooHighThroughput
	MIN-ACCESS read-only
	DESCRIPTION	  "Write access	is not required.
"

	::= { ciscoRasMonitorMIBCompliances 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Units of Conformance
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
   ciscoRasCapacityGroup OBJECT-GROUP
      OBJECTS {
                -- The RAS capacity group
          crasMaxSessionsSupportable ,
          crasMaxUsersSupportable ,
          crasMaxGroupsSupportable ,
          crasNumCryptoAccelerators
      }
      STATUS current
      DESCRIPTION        "This group consists of the MIB objects pertaining 
        to Remote Access Service capacity parameters defined
        in the Cisco Remote Access MIB.
"
      ::= { ciscoRasMonitorMIBGroups 1 }

   ciscoRasResourceUsageGroup OBJECT-GROUP
      OBJECTS {
          crasGlobalBwUsage
      }
      STATUS current
      DESCRIPTION        "This group consists of the MIB objects pertaining 
        to Remote Access Service resource usage parameters 
        defined in the Cisco Remote Access MIB.
"
      ::= { ciscoRasMonitorMIBGroups 2 }

   ciscoRasActivityGroup OBJECT-GROUP
      OBJECTS {
          crasNumSessions ,
          crasNumPrevSessions ,
          crasNumUsers ,
          crasGlobalInPkts ,
          crasGlobalOutPkts ,
          crasGlobalInOctets ,
          crasGlobalOutOctets ,
          crasGlobalInDecompOctets,
          crasGlobalOutUncompOctets,
          crasGlobalInDropPkts ,
          crasGlobalOutDropPkts ,
          crasGroup                        ,
             crasAuthenMethod                 ,
             crasAuthorMethod                 ,
             crasSessionDuration              ,
             crasLocalAddressType,
             crasLocalAddress                 ,
             crasISPAddressType               ,
             crasISPAddress                   ,
             crasSessionProtocol              ,
          crasProtocolElement,
             crasSessionEncryptionAlgo ,
             crasSessionPktAuthenAlgo ,
             crasSessionCompressionAlgo ,
             crasHeartbeatInterval            ,
             crasClientVendorString           ,
             crasClientVersionString          ,
             crasClientOSVendorString         ,
             crasClientOSVersionString        ,
      --
             crasPrimWINSServerAddrType    ,
             crasPrimWINSServer                   ,
             crasSecWINSServerAddrType     ,
             crasSecWINSServer                   ,
             crasPrimDNSServerAddrType,
             crasPrimDNSServer ,
             crasSecDNSServerAddrType         ,
             crasSecDNSServer ,
             crasDHCPServerAddrType           ,
             crasDHCPServer                   ,
             --
             crasSessionInPkts                ,
             crasSessionOutPkts               ,
             crasSessionInDropPkts            ,
             crasSessionOutDropPkts           ,
             crasSessionInOctets               ,
             crasSessionOutOctets,
             crasSessionState
             --
          }
      STATUS current
      DESCRIPTION         "This group consists of the MIB objects pertaining 
          to the Cisco Remote Access MIB Activity group.

          Following are definitions of some terms used in
          this compliance group:

          User:
             A remote access user.

          Group: 
             A collection of remote access users grouped
             and managed together as a single entity for
             administrative convenience.

          ISP:
             Internet Service Provider.

          Crypto Accelerator
             'Crypto Accelerator' denotes a device which 
             the managed entity uses to offload some or all 
             computations pertaining to cryptographic 
             operations.

          Session
             A connection terminating on the managed device 
             which has been established to provide remote access 
             connectivity to a user.
         
"
      ::= { ciscoRasMonitorMIBGroups 3 }

   ciscoRasGrpActivityGroup OBJECT-GROUP
      OBJECTS {
            crasNumGroups,
            crasActGrNumUsers,
            crasActGrpInPkts,
            crasActGrpOutPkts,
            crasActGrpInDropPkts,
            crasActGrpOutDropPkts,
            crasActGrpInOctets,
            crasActGrpOutOctets
          }
      STATUS current
      DESCRIPTION         "This group consists of the MIB objects pertaining 
          to activity of user groups.
         
"
      ::= { ciscoRasMonitorMIBGroups 4 }


   ciscoRasMandatoryFailureGroup OBJECT-GROUP
      OBJECTS {
               crasNumTotalFailures,
               crasNumDeclinedSessions,
               crasNumAbortedSessions,
               crasFailTableSize
              }
      STATUS current
      DESCRIPTION       "This group categorizes objects pertaining to
       failures in the Remote Access Service which are
       essential for successful monitoring of the
       service.
       
"
      ::= { ciscoRasMonitorMIBGroups 5 }

   ciscoRasOptionalFailureGroup OBJECT-GROUP
      OBJECTS {
               crasNumSetupFailInsufResources,
               crasSessFailUsername,
               crasSessFailGroupname,
               crasSessFailType,
               crasSessFailReason,
               crasSessFailTime,
               crasSessFailSessionIndex,
               crasSessFailISPAddr,
               crasSessFailLocalAddr,
               crasSessFailISPAddrType,
               crasSessFailLocalAddrType,
               crasFailLastFailIndex,
               crasGrpFailNumFailAuths,
               crasGrpFailNumResourceFailures,
               crasGrpFailNumDeclined,
               crasGrpFailNumTerminatedMgmt,
               crasGrpFailNumTerminatedOther
              }
      STATUS current
      DESCRIPTION       "This group categorizes optional objects pertaining 
       to failures in the Remote Access Service.
"
      ::= { ciscoRasMonitorMIBGroups 6 }

   ciscoRasSecurityGroup OBJECT-GROUP
      OBJECTS {
               crasNumDisabledAccounts
              }
      STATUS current
      DESCRIPTION       "This group categorizes objects pertaining to the 
       monitoring state of security in the Remote Access
       Service.
"
      ::= { ciscoRasMonitorMIBGroups 7 }

   ciscoRasThresholdsGroup OBJECT-GROUP
      OBJECTS {
               crasThrMaxSessions,
               crasThrMaxFailedAuths,
               crasThrMaxThroughput 
              }
      STATUS current
      DESCRIPTION         "This group categorizes objects which are used to 
         establish baseline values of metrics instrumenting
         the Remote Access Service.
"
      ::= { ciscoRasMonitorMIBGroups 8 }

   ciscoRasNotificationCntlGroup OBJECT-GROUP
      OBJECTS {
               crasCntlTooManySessions,
               crasCntlTooManyFailedAuths,
               crasCntlTooHighThroughput
              }
      STATUS current
      DESCRIPTION       "This group of objects controls the sending of 
       notifications defined in this MIB module.
"
      ::= { ciscoRasMonitorMIBGroups 9 }

   ciscoRasNotificationsGroup    NOTIFICATION-GROUP
      NOTIFICATIONS {
               ciscoRasTooHighThroughput,
               ciscoRasTooManyFailedAuths,
               ciscoRasTooManySessions
                    }
      STATUS current
      DESCRIPTION         "This group contains the notifications for the 
         Remote Access MIB.
"
      ::= { ciscoRasMonitorMIBGroups 10 }

   ciscoRasActivityGroupRev1 OBJECT-GROUP
      OBJECTS { 
	       crasEmailNumSessions,
	       crasEmailCumulateSessions,
               crasEmailPeakConcurrentSessions,
               crasIPSecNumSessions,
               crasIPSecCumulateSessions,
               crasIPSecPeakConcurrentSessions,
               crasL2LNumSessions,
               crasL2LCumulateSessions,
               crasL2LPeakConcurrentSessions,
               crasLBNumSessions,
               crasLBCumulateSessions,
               crasLBPeakConcurrentSessions,
               crasSVCNumSessions,
               crasSVCCumulateSessions,
               crasSVCPeakConcurrentSessions,
               crasWebvpnNumSessions,
               crasWebvpnCumulateSessions,
               crasWebvpnPeakConcurrentSessions
              }
      STATUS current
      DESCRIPTION       "This group contains activity information related
        to sessions.
"
      ::= { ciscoRasMonitorMIBGroups 11 }

END





                
                
            
			
        
   
Help  |  Feedback