Guest

Tools & Resources

SNMP Object Navigator


CISCO-REPEATER-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-REPEATER-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. IANAifType-MIB Download  |  Download  |  View Dependencies
    4. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    5. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    6. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    7. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. CISCO-SMI Download  |  Download  |  View Dependencies
    9. SNMP-REPEATER-MIB Not Required  |  Download  |  View Dependencies
    10. SNMPv2-SMI-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    11. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    12. CISCO-REPEATER-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-REPEATER-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- *****************************************************************
-- CISCO-REPEATER-MIB.my:  Cisco Repeater MIB file
--
-- Jan 1995, Viet Nguyen
--
-- Copyright (c) 1995-1996 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-REPEATER-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	NOTIFICATION-TYPE,
	Counter32,
	Gauge32
		FROM SNMPv2-SMI
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
        TruthValue,
        TimeStamp                           
               FROM SNMPv2-TC
	ciscoMgmt
		FROM CISCO-SMI
        rptrPortEntry
                FROM SNMP-REPEATER-MIB;

ciscoRptrMIB MODULE-IDENTITY
	LAST-UPDATED	"9512050000Z"
	ORGANIZATION	"Cisco Systems, Inc."
	CONTACT-INFO
		"       Cisco Systems
			Customer Service

		Postal: 170 W Tasman Drive
			San Jose, CA  95134
			USA

		   Tel: +1 800 553-NETS

		E-mail: cs-snmp@cisco.com"
	DESCRIPTION		"
"
	REVISION        "9512050000Z"
	DESCRIPTION		"Correct minor syntax errors.
"
	REVISION	"9510170000Z"
	DESCRIPTION                "Added MAC security related objects to the initial version 
                 of this MIB module.
"
	REVISION	"9503090000Z"
	DESCRIPTION		"Correct the definition for ciscoRptrPortMDIStatus.
"
	REVISION	"9410260000Z"
	DESCRIPTION		"Initial version of this MIB module.
"
	::= { ciscoMgmt 22 }

ciscoRptrMIBObjects OBJECT IDENTIFIER ::= { ciscoRptrMIB 1 }

ciscoRptrPortTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF CiscoRptrPortEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION		"Table of descriptive and status information about
                 the ports.
"
	::= { ciscoRptrMIBObjects 1 }

ciscoRptrPortEntry OBJECT-TYPE
	SYNTAX     CiscoRptrPortEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION		"An entry in the table, containing information
                 about a single port.
"
        AUGMENTS { rptrPortEntry }
	::= { ciscoRptrPortTable 1 }

CiscoRptrPortEntry ::=
       SEQUENCE {
           ciscoRptrPortMDIStatus              INTEGER,
           ciscoRptrPortLinkTestEnabled        TruthValue,
           ciscoRptrPortLinkTestFailed         TruthValue,
           ciscoRptrPortAutoPolarityEnabled    TruthValue,
           ciscoRptrPortAutoPolarityCorrected  TruthValue,
           ciscoRptrPortSrcAddrCtrl            TruthValue,
           ciscoRptrPortAllowedSrcAddr         OCTET STRING,
           ciscoRptrPortAllowedSrcAddrStatus   INTEGER,
           ciscoRptrPortLastIllegalSrcAddr     OCTET STRING,
           ciscoRptrPortIllegalAddrTrapAcked   INTEGER,       
           ciscoRptrPortIllegalAddrTrapEnabled TruthValue,   
           ciscoRptrPortIllegalAddrFirstHeard  TimeStamp,    
           ciscoRptrPortIllegalAddrLastHeard   TimeStamp, 
           ciscoRptrPortLastIllegalAddrCount   Gauge32,    
           ciscoRptrPortIllegalAddrTotalCount  Counter32  
       }

ciscoRptrPortMDIStatus OBJECT-TYPE
       SYNTAX     INTEGER {
                      normal(1),
                      crossover(2),
                      notSwitchable(3)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This object indicates the port's MDI/MDI-X switching status.  
                The normal(1) status indicates the port is configured to be 
                standard MDI as defined by the 10BaseT Standard for hub port
                (allowing for connection to a chained hub).  The crossover(2) 
                status indicates the port is configured to be in MDI-X mode
                (allowing for connection to a 10BaseT end node).  The 
                notSwitchable(3) status indicates the port is not switchable 
                between MDI and MDI-X mode.
"
       ::= { ciscoRptrPortEntry 1 }

ciscoRptrPortLinkTestEnabled OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "Specifies whether or not Link Integrity Test Function is
                enabled for the port as specified by the 10BaseT Standard.  
                When the link test function is enabled, the absence of the 
                Link Test pulses and receive data on the port will cause the 
                port to go into a Link Fail state.  In this state, the data 
                transmission, data reception and collision detection functions
                are disabled until valid data or 4 consecutive Link Test 
                pulses appear on RXD+/- pair of the port.

                With the Link Integrity Test Function disabled, the data 
                driver, receiver and collision detection remain enabled 
                irrespective of the presence or absence of data or Link Test 
                pulses on the port.
"
       DEFVAL { true }
       ::= { ciscoRptrPortEntry 2 }

ciscoRptrPortLinkTestFailed OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This object indicates the status of the Link Test function
                for the port.  Set to false indicates valid data or 4 
                consecutive Link Test pulses have been detected on the
                port.  Set to true indicates the failure of the Link Test 
                function for the port.  In the Link Test Fail state, data 
                transmission, data reception and collision detection functions
                are disabled until valid data or 4 consecutive Link Test pulses
                appear on the RXD+/- pair of the port.
"
       ::= { ciscoRptrPortEntry 3 }

ciscoRptrPortAutoPolarityEnabled OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "Specifies whether or not the Automatic Receiver Polarity 
                Reversal is enabled for the port.  This feature provides the 
                ability to invert the polarity of the signals appearing at the 
                RXD+/- pair of the port prior to re-transmission if the 
                polarity of the received signal is reversed (such as in the 
                case of wiring error).
"
       DEFVAL { true }
       ::= { ciscoRptrPortEntry 4 }

ciscoRptrPortAutoPolarityCorrected OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This object indicates the status of the Automatic Receiver
                Polarity Reversal for the port.  Set to true indicates the
                polarity of the port has been detected as reversed and is
                corrected.  Set to false indicates the polarity for the port
                as having correct polarity.
"
       ::= { ciscoRptrPortEntry 5 }

ciscoRptrPortSrcAddrCtrl OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "Specifies whether or not the Source Address Control feature is 
                enabled for the port.  This feature provides the ability to 
                control which device's specific MAC address is allowed access 
                to the network.  If the management entity specified an address
                via ciscoRptrPortAllowedSrcAddr, only the device with the 
                configured MAC address is allowed access to the network.  If 
                the management entity does not specified an address, the 
                allowed source address is learned from the last source address 
                if valid; otherwise, the allowed source address is learned from
                the MAC address of the first valid packet detected on the port.
                When another MAC address other than the allowed source address
                is detected on the port, the port is partitioned.

                WARNING: Configuring Source Address Control feature on the
                port which is used for management can cause the management
                entity to lose access to the agent if the management's source 
                address does not match the allowed source address.
"
       DEFVAL { false }
       ::= { ciscoRptrPortEntry 6 }

ciscoRptrPortAllowedSrcAddr OBJECT-TYPE
       SYNTAX     OCTET STRING (SIZE(0 | 6))
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "For write access, this object is the allowed source address
                that is to be configured for source address control feature 
                for the port. 

                For read access, if no allowed source address was specifically 
                specified by the manager, the agent shall return the learned 
                address to control.  Otherwise, the specified allowed source 
                address is returned if configured by management entity.
"
       ::= { ciscoRptrPortEntry 7 }

ciscoRptrPortAllowedSrcAddrStatus OBJECT-TYPE
       SYNTAX     INTEGER {
                      allowedSrcAddrConfig(1),
                      allowedSrcAddrLearn(2),
                      allowedSrcAddrUndefined(3)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This object indicates the status of ciscoRptrPortAllowedSrcAddr
                for the port.  allowedSrcAddrConfig(1) status indicates that 
                the allowed source address was explicitly configured by 
                management entity.  The allowedSrcAddrLearn(2) status indicates
                that the allowed source address was learned for the port.  
                The allowedSrcAddrUndefined(3) status indicates that currently
                there is no restriction on the source address for the port.
"
       ::= { ciscoRptrPortEntry 8 }

ciscoRptrPortLastIllegalSrcAddr OBJECT-TYPE
       SYNTAX     OCTET STRING (SIZE(0 | 6))
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This object is the last illegal source address which caused 
                this port to be partitioned.  If the port is never partitioned
                due to Source Address Control, the agent shall return a string
                of length zero.
"
       ::= { ciscoRptrPortEntry 9 }


ciscoRptrPortIllegalAddrTrapAcked OBJECT-TYPE
       SYNTAX     INTEGER {
                            acked(1),
                            no-acked-sending(2),
                            no-acked-no-sending(3)
                          }

       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "Specifies whether an acknowledgment is sent by an NMS to
                indicate that an illegal source address trap was 
                received.
                acked :
                           Set by a NMS to acknowledge reception of an 
                           illegal source address.  When this flag is 
                           set, no more trap will be sent for the port.
                           
                no-acked-sending: 
                           Set by the SNMP agent to indicate that it is
                           sending a trap to one or more NMSs. 
                           The trap is sent based upon the trap
                           algorithm specified by ciscoRptrTrapAlgorithm. 

                no-acked-no-sending: 
                           Set by the SNMP agent when there is no trap 
                           to be sent or the trap was already sent out.
"

	DEFVAL  { no-acked-no-sending  }
       ::= { ciscoRptrPortEntry 10 }


ciscoRptrPortIllegalAddrTrapEnabled OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "Specifies whether or not to send the illegal source 
                address trap for the port.

                When it is enabled, one or more illegal source address 
                traps will be generated if there is a mismatch of 
                source address.  Traps are sent based on the algorithm 
                specified by ciscoRptrTrapAlgorithm defined in the
                GLOBAL section.

                When it is disabled, no traps are sent. 
"
       DEFVAL { false }
       ::= { ciscoRptrPortEntry 11 }


ciscoRptrPortIllegalAddrFirstHeard  OBJECT-TYPE
       SYNTAX     TimeStamp
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This is the time stamp for the very first time when
                the current illegal source address was detected on the 
                port.  The time stamp is given by the value of MIB-II's
                sysUpTime at which this occurrence happens.  If no illegal 
                source address is heard on the port, this value is set 
                to 0.
"
       ::= { ciscoRptrPortEntry 12 }

ciscoRptrPortIllegalAddrLastHeard   OBJECT-TYPE
       SYNTAX     TimeStamp
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "This is the time stamp for the last time when the 
                current illegal source address was detected on the 
                port.  The time stamp is given by the value of MIB-II's
                sysUpTime at which occurrence happens.  If no illegal
                source address was never occurred, this value is set
                to 0.
"

       ::= { ciscoRptrPortEntry 13 }

ciscoRptrPortLastIllegalAddrCount   OBJECT-TYPE
       SYNTAX     Gauge32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION                "This is the count of consecutive occurrences of
                the last illegal source address on the port.
                When illegal address is detected, this count
                will be incremented about every minute.
"

       ::= { ciscoRptrPortEntry 14 }

ciscoRptrPortIllegalAddrTotalCount  OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION                "This is the total count of all cccurences of any
                illegal source addresses heard on the port since start-up.
                
                Note: Illegal source addresses may be different, may be 
                      the same. This counter is a *total* count from this port.
"

       ::= { ciscoRptrPortEntry 15 }

 
-- Global 
-- The following parameters apply for all the repeater ports.

ciscoRptrMIBglobal OBJECT IDENTIFIER ::= { ciscoRptrMIBObjects 2 }

ciscoRptrTrapAlgorithm OBJECT-TYPE
	SYNTAX     INTEGER
                     { once (1),
                       decay (2)
                     }
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION		"Specifies how often trap(s) will be sent by the SNMP agent.
                 once  - The trap is only sent once.
                 decay - The same trap is sent multiple times at 
                         approximately exponential decaying rate.
                         e.g. 1st trap is sent immediately, 
                              2nd trap is at  1 minute, 
                              3rd trap is at 2 minutes, 
                              4th trap is at 4 minutes, 
                              and so on. 
                         The rate is capped at about 32 minutes.

                         NOTE : Decaying rate is used to avoid
                                overflood the NMS.
" 
       DEFVAL {decay }
       ::= { ciscoRptrMIBglobal 1 }

-- Repeater Trap

ciscoRptrMIBTrapPrefix OBJECT IDENTIFIER ::= { ciscoRptrMIB 3 }
ciscoRptrMIBTraps OBJECT IDENTIFIER ::= { ciscoRptrMIBTrapPrefix 0 }

ciscoRptrIllegalSrcAddrTrap  NOTIFICATION-TYPE 
             OBJECTS    { 
                        ciscoRptrPortLastIllegalSrcAddr
                        }
             STATUS     current
             DESCRIPTION                "When the illegal MAC source address violation is 
                 detected, the port is partitioned for one minute.  
                 In addition, this trap notification is generated.
                 Note: rptrPortGroupIndex, and rptrPortIndex are
                    the instances of ciscoRptrPortLastIllegalSrcAddr.
"  
             ::= { ciscoRptrMIBTraps 1 }

-- conformance information

ciscoRptrMIBConformance OBJECT IDENTIFIER ::= { ciscoRptrMIB 2 }
ciscoRptrMIBCompliances OBJECT IDENTIFIER ::= { ciscoRptrMIBConformance 1 }
ciscoRptrMIBGroups      OBJECT IDENTIFIER ::= { ciscoRptrMIBConformance 2 }


-- compliance statements

ciscoRptrMIBCompliance MODULE-COMPLIANCE
        STATUS  obsolete -- superseded by ciscoRptrMIBComplianceV11R01
        DESCRIPTION                "The compliance statement for entities which implement
                 the cisco Repeater MIB
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoRptrMIBGroup }
        ::= { ciscoRptrMIBCompliances 1 }

ciscoRptrMIBComplianceV11R01 MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION                "The compliance statement for entities which implement
                 the cisco Repeater MIB
"
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoRptrMIBPortGroupV11R01,
                                   ciscoRptrMIBGlobalsGroup }
        ::= { ciscoRptrMIBCompliances 2 }

-- units of conformance

ciscoRptrMIBGroup OBJECT-GROUP
        OBJECTS {
           ciscoRptrPortMDIStatus,
           ciscoRptrPortLinkTestEnabled,
           ciscoRptrPortLinkTestFailed,
           ciscoRptrPortAutoPolarityEnabled,
           ciscoRptrPortAutoPolarityCorrected,
           ciscoRptrPortSrcAddrCtrl,
           ciscoRptrPortAllowedSrcAddr,
           ciscoRptrPortAllowedSrcAddrStatus,
           ciscoRptrPortLastIllegalSrcAddr
        }
        STATUS  obsolete -- superseded by ciscoRptrMIBPortGroupV11R01
       DESCRIPTION                "A collection of objects providing repeater ability.
"
        ::= { ciscoRptrMIBGroups 1 }

ciscoRptrMIBPortGroupV11R01 OBJECT-GROUP
        OBJECTS {
           ciscoRptrPortMDIStatus,
           ciscoRptrPortLinkTestEnabled,
           ciscoRptrPortLinkTestFailed,
           ciscoRptrPortAutoPolarityEnabled,
           ciscoRptrPortAutoPolarityCorrected,
           ciscoRptrPortSrcAddrCtrl,
           ciscoRptrPortAllowedSrcAddr,
           ciscoRptrPortAllowedSrcAddrStatus,
           ciscoRptrPortLastIllegalSrcAddr,
           ciscoRptrPortIllegalAddrTrapAcked,  
           ciscoRptrPortIllegalAddrTrapEnabled,
           ciscoRptrPortIllegalAddrFirstHeard,
           ciscoRptrPortIllegalAddrLastHeard,
           ciscoRptrPortLastIllegalAddrCount,
           ciscoRptrPortIllegalAddrTotalCount
        }
        STATUS  current
       DESCRIPTION                "A collection of objects for managing a repeater port.
"
        ::= { ciscoRptrMIBGroups 2 }

ciscoRptrMIBGlobalsGroup OBJECT-GROUP
        OBJECTS {
           ciscoRptrTrapAlgorithm
        }
        STATUS  current
       DESCRIPTION                "A collection of objects apply to all repeater ports.
"
        ::= { ciscoRptrMIBGroups 3 }

END





                
                
            
			
        
   
Help  |  Feedback