View compiling dependencies for other MIBS by clearing the page and selecting another MIB.
Compile the MIB
Before you can compile OLD-CISCO-SYSTEM-MIB , you need to compile the MIBs listed below in the order listed.
Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.
If you are using Internet Explorer click here.
| MIB Name |
|
Version 1 |
|
Version 2 |
|
Dependencies |
| 1. SNMPv2-SMI |
|
Download | | | Download | | | View Dependencies |
| 2. SNMPv2-TC |
|
Download | | | Download | | | View Dependencies |
| 3. IANAifType-MIB |
|
Download | | | Download | | | View Dependencies |
| 4. RFC1155-SMI | Non-Cisco MIB | | | Non-Cisco MIB | | | - | |
| 5. RFC-1212 | Non-Cisco MIB | | | Non-Cisco MIB | | | - | |
| 6. RFC1213-MIB |
|
Not Required | | | Download | | | View Dependencies |
| 7. CISCO-SMI |
|
Download | | | Download | | | View Dependencies |
| 8. OLD-CISCO-SYSTEM-MIB |
|
Download | | | Not Required | | |
More Downloads
| None |
Extra Information
None
MIB Contents
This is the SMI version 1 of the MIB. There is no SMI version 2 of the MIB.
-- *****************************************************************
-- OLD-CISCO-SYSTEM-MIB.my: Old Cisco System MIB file
--
-- Copyright (c) 1994-1995 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--
OLD-CISCO-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
local
FROM CISCO-SMI;
lsystem OBJECT IDENTIFIER ::= { local 1 }
-- Local System Group
-- This group is present in all products.
romId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable contains a printable octet
string which contains the System Bootstrap
description and version identification.
"
::= { lsystem 1 }
whyReload OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable contains a printable octet
string which contains the reason why the
system was last restarted.
"
::= { lsystem 2 }
hostName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable represents the name of the
host in printable ascii characters.
"
::= { lsystem 3 }
domainName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable is the domain portion of the
domain name of the host.
"
::= { lsystem 4 }
authAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable contains the last SNMP
authorization failure IP address.
"
::= { lsystem 5 }
bootHost OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "Contains the IP address of the host that
supplied the currently running software.
"
::= { lsystem 6 }
netConfigAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the address of the host that supplied
the network-confg file.
"
::= { lsystem 48 }
netConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the name of the network configuration
file.
"
::= { lsystem 49 }
netConfigSet OBJECT-TYPE
SYNTAX DisplayString
ACCESS write-only
STATUS mandatory
DESCRIPTION "Cause the loading of a new network-confg
file using TFTP.
"
::= { lsystem 50 }
hostConfigAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION "Contains the address of the host that
provided the host-config file.
"
::= { lsystem 51 }
hostConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION "Contains the name of the last configured
host-confg file.
"
::= { lsystem 52 }
hostConfigSet OBJECT-TYPE
SYNTAX DisplayString
ACCESS write-only
STATUS obsolete
DESCRIPTION "Cause the loading of a new host-confg file
using TFTP.
"
::= { lsystem 53 }
writeMem OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION "Write configuration into non-volatile memory
/ erase config memory if 0.
"
::= { lsystem 54 }
writeNet OBJECT-TYPE
SYNTAX DisplayString
ACCESS write-only
STATUS mandatory
DESCRIPTION "Write configuration to host using TFTP.
"
::= { lsystem 55 }
ciscoContactInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "cisco's name and address
"
::= { lsystem 61 }
netConfigProto OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the protocol that supplied the
network-confg file.
"
::= { lsystem 70 }
hostConfigProto OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the protocol that supplied the host-
confg file.
"
::= { lsystem 71 }
sysConfigAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the address of the host that supplied
the system boot image.
"
::= { lsystem 72 }
sysConfigName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the name of the system boot image.
"
::= { lsystem 73 }
sysConfigProto OBJECT-TYPE
SYNTAX INTEGER {
-- other(0),
tftp(1),
rom(2),
flash(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Holds the protocol or media that supplied
the system boot image.
"
::= { lsystem 74 }
sysClearARP OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION "Perform a clearing of the entire ARP cache
and invalidation of route caches.
"
::= { lsystem 75 }
sysClearInt OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION "Clear interface given IfIndex as value.
"
::= { lsystem 76 }
END
|
|
Feedback