Guest

Tools & Resources

SNMP Object Navigator


SNMPv2-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile SNMPv2-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. IANAifType-MIB Download  |  Download  |  View Dependencies
    4. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    5. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    6. RFC1213-MIB Not Required  |  Download  |  View Dependencies
    7. SNMPv2-SMI-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    9. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    10. SNMPv2-MIB Download  |  Download  | 

More Downloads

OID File: SNMPv2-MIB.oid

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- *****************************************************************
-- SNMPv2-MIB.my:  Management Information Base (MIB) for the
--                 Simple Network Management Protocol (SNMP)
--
-- March 2006,  Wen Xu
--
-- Copyright (c) 2006 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC 3418


SNMPv2-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
       TimeTicks, Counter32, snmpModules, mib-2
           FROM SNMPv2-SMI
       DisplayString, TestAndIncr, TimeStamp
           FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
           FROM SNMPv2-CONF;

   snmpMIB MODULE-IDENTITY
       LAST-UPDATED "200210160000Z"
       ORGANIZATION "IETF SNMPv3 Working Group"
       CONTACT-INFO
               "WG-EMail:   snmpv3@lists.tislabs.com
                Subscribe:  snmpv3-request@lists.tislabs.com

                Co-Chair:   Russ Mundy
                            Network Associates Laboratories
                postal:     15204 Omega Drive, Suite 300
                            Rockville, MD 20850-4601
                            USA
                EMail:      mundy@tislabs.com
                phone:      +1 301 947-7107

                Co-Chair:   David Harrington
                            Enterasys Networks
                postal:     35 Industrial Way
                            P. O. Box 5005
                            Rochester, NH 03866-5005
                            USA
                EMail:      dbh@enterasys.com
                phone:      +1 603 337-2614

                Editor:     Randy Presuhn
                            BMC Software, Inc.
                postal:     2141 North First Street
                            San Jose, CA 95131
                            USA
                EMail:      randy_presuhn@bmc.com
                phone:      +1 408 546-1006"
       DESCRIPTION               "The MIB module for SNMP entities.

                Copyright (C) The Internet Society (2002). This
                version of this MIB module is part of RFC 3418;
                see the RFC itself for full legal notices.
               
"
       REVISION      "200210160000Z"
       DESCRIPTION               "This revision of this MIB module was published as
                RFC 3418.
"
       REVISION      "199511090000Z"
       DESCRIPTION               "This revision of this MIB module was published as
                RFC 1907.
"
       REVISION      "199304010000Z"
       DESCRIPTION               "The initial revision of this MIB module was published
               as RFC 1450.
"
       ::= { snmpModules 1 }

   snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }

   --  ::= { snmpMIBObjects 1 }        this OID is obsolete
   --  ::= { snmpMIBObjects 2 }        this OID is obsolete
   --  ::= { snmpMIBObjects 3 }        this OID is obsolete

   -- the System group
   --
   -- a collection of objects common to all managed systems.

   system   OBJECT IDENTIFIER ::= { mib-2 1 }

   sysDescr OBJECT-TYPE
       SYNTAX      DisplayString (SIZE (0..255))
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION               "A textual description of the entity.  This value should
               include the full name and version identification of
               the system's hardware type, software operating-system,
               and networking software.
"
       ::= { system 1 }

   sysObjectID OBJECT-TYPE
       SYNTAX      OBJECT IDENTIFIER
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION               "The vendor's authoritative identification of the
               network management subsystem contained in the entity.
               This value is allocated within the SMI enterprises
               subtree (1.3.6.1.4.1) and provides an easy and
               unambiguous means for determining `what kind of box' is
               being managed.  For example, if vendor `Flintstones,
               Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
               it could assign the identifier 1.3.6.1.4.1.424242.1.1
               to its `Fred Router'.
"
       ::= { system 2 }

   sysUpTime OBJECT-TYPE
       SYNTAX      TimeTicks
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION               "The time (in hundredths of a second) since the
               network management portion of the system was last
               re-initialized.
"
       ::= { system 3 }

   sysContact OBJECT-TYPE
       SYNTAX      DisplayString (SIZE (0..255))
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION               "The textual identification of the contact person for
               this managed node, together with information on how
               to contact this person.  If no contact information is
               known, the value is the zero-length string.
"
       ::= { system 4 }

   sysName OBJECT-TYPE
       SYNTAX      DisplayString (SIZE (0..255))
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION               "An administratively-assigned name for this managed
               node.  By convention, this is the node's fully-qualified
               domain name.  If the name is unknown, the value is
               the zero-length string.
"
       ::= { system 5 }

   sysLocation OBJECT-TYPE
       SYNTAX      DisplayString (SIZE (0..255))
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION               "The physical location of this node (e.g., 'telephone
               closet, 3rd floor').  If the location is unknown, the
               value is the zero-length string.
"
       ::= { system 6 }

   sysServices OBJECT-TYPE
       SYNTAX      INTEGER (0..127)
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION               "A value which indicates the set of services that this
               entity may potentially offer.  The value is a sum.
               This sum initially takes the value zero. Then, for
               each layer, L, in the range 1 through 7, that this node
               performs transactions for, 2 raised to (L - 1) is added
               to the sum.  For example, a node which performs only
               routing functions would have a value of 4 (2^(3-1)).
               In contrast, a node which is a host offering application
               services would have a value of 72 (2^(4-1) + 2^(7-1)).
               Note that in the context of the Internet suite of
               protocols, values should be calculated accordingly:

                    layer      functionality
                      1        physical (e.g., repeaters)
                      2        datalink/subnetwork (e.g., bridges)
                      3        internet (e.g., supports the IP)
                      4        end-to-end  (e.g., supports the TCP)
                      7        applications (e.g., supports the SMTP)

               For systems including OSI protocols, layers 5 and 6
               may also be counted.
"
       ::= { system 7 }

   -- object resource information
   --
   -- a collection of objects which describe the SNMP entity's
   -- (statically and dynamically configurable) support of
   -- various MIB modules.

   sysORLastChange OBJECT-TYPE
       SYNTAX     TimeStamp
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The value of sysUpTime at the time of the most recent
               change in state or value of any instance of sysORID.
"
       ::= { system 8 }

   sysORTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF SysOREntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION               "The (conceptual) table listing the capabilities of
               the local SNMP application acting as a command
               responder with respect to various MIB modules.
               SNMP entities having dynamically-configurable support
               of MIB modules will have a dynamically-varying number
               of conceptual rows.
"
       ::= { system 9 }

   sysOREntry OBJECT-TYPE
       SYNTAX     SysOREntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION               "An entry (conceptual row) in the sysORTable.
"
       INDEX      { sysORIndex }
       ::= { sysORTable 1 }

   SysOREntry ::= SEQUENCE {
       sysORIndex     INTEGER,
       sysORID        OBJECT IDENTIFIER,
       sysORDescr     DisplayString,
       sysORUpTime    TimeStamp
   }

   sysORIndex OBJECT-TYPE
       SYNTAX     INTEGER (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION               "The auxiliary variable used for identifying instances
               of the columnar objects in the sysORTable.
"
       ::= { sysOREntry 1 }

   sysORID OBJECT-TYPE
       SYNTAX     OBJECT IDENTIFIER
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "An authoritative identification of a capabilities
               statement with respect to various MIB modules supported
               by the local SNMP application acting as a command
               responder.
"
       ::= { sysOREntry 2 }

   sysORDescr OBJECT-TYPE
       SYNTAX     DisplayString
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "A textual description of the capabilities identified
               by the corresponding instance of sysORID.
"
       ::= { sysOREntry 3 }

   sysORUpTime OBJECT-TYPE
       SYNTAX     TimeStamp
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The value of sysUpTime at the time this conceptual
               row was last instantiated.
"
       ::= { sysOREntry 4 }

   -- the SNMP group
   --
   -- a collection of objects providing basic instrumentation and
   -- control of an SNMP entity.

   snmp     OBJECT IDENTIFIER ::= { mib-2 11 }

   snmpInPkts OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The total number of messages delivered to the SNMP
               entity from the transport service.
"
       ::= { snmp 1 }

   snmpInBadVersions OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The total number of SNMP messages which were delivered
               to the SNMP entity and were for an unsupported SNMP
               version.
"
       ::= { snmp 3 }

   snmpInBadCommunityNames OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION              "The total number of community-based SNMP messages (for
              example,  SNMPv1) delivered to the SNMP entity which
              used an SNMP community name not known to said entity.
              Also, implementations which authenticate community-based
              SNMP messages using check(s) in addition to matching
              the community name (for example, by also checking
              whether the message originated from a transport address
              allowed to use a specified community name) MAY include
              in this value the number of messages which failed the
              additional check(s).  It is strongly RECOMMENDED that
              the documentation for any security model which is used
              to authenticate community-based SNMP messages specify
              the precise conditions that contribute to this value.
"
       ::= { snmp 4 }

   snmpInBadCommunityUses OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION              "The total number of community-based SNMP messages (for
              example, SNMPv1) delivered to the SNMP entity which
              represented an SNMP operation that was not allowed for
              the SNMP community named in the message.  The precise
              conditions under which this counter is incremented
              (if at all) depend on how the SNMP entity implements
              its access control mechanism and how its applications
              interact with that access control mechanism.  It is
              strongly RECOMMENDED that the documentation for any
              access control mechanism which is used to control access
              to and visibility of MIB instrumentation specify the
              precise conditions that contribute to this value.
"
       ::= { snmp 5 }

   snmpInASNParseErrs OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The total number of ASN.1 or BER errors encountered by
               the SNMP entity when decoding received SNMP messages.
"
       ::= { snmp 6 }

   snmpEnableAuthenTraps OBJECT-TYPE
       SYNTAX      INTEGER { enabled(1), disabled(2) }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION               "Indicates whether the SNMP entity is permitted to
               generate authenticationFailure traps.  The value of this
               object overrides any configuration information; as such,
               it provides a means whereby all authenticationFailure
               traps may be disabled.

               Note that it is strongly recommended that this object
               be stored in non-volatile memory so that it remains
               constant across re-initializations of the network
               management system.
"
       ::= { snmp 30 }

   snmpSilentDrops OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION              "The total number of Confirmed Class PDUs (such as
              GetRequest-PDUs, GetNextRequest-PDUs,
              GetBulkRequest-PDUs, SetRequest-PDUs, and
              InformRequest-PDUs) delivered to the SNMP entity which
              were silently dropped because the size of a reply
              containing an alternate Response Class PDU (such as a
              Response-PDU) with an empty variable-bindings field
              was greater than either a local constraint or the
              maximum message size associated with the originator of
              the request.
"
       ::= { snmp 31 }

   snmpProxyDrops OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION               "The total number of Confirmed Class PDUs
               (such as GetRequest-PDUs, GetNextRequest-PDUs,
               GetBulkRequest-PDUs, SetRequest-PDUs, and
               InformRequest-PDUs) delivered to the SNMP entity which
               were silently dropped because the transmission of
               the (possibly translated) message to a proxy target
               failed in a manner (other than a time-out) such that
               no Response Class PDU (such as a Response-PDU) could
               be returned.
"
       ::= { snmp 32 }

   -- information for notifications
   --
   -- a collection of objects which allow the SNMP entity, when
   -- supporting a notification originator application,
   -- to be configured to generate SNMPv2-Trap-PDUs.

   snmpTrap       OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }

   snmpTrapOID OBJECT-TYPE
       SYNTAX     OBJECT IDENTIFIER
       MAX-ACCESS accessible-for-notify
       STATUS     current
       DESCRIPTION               "The authoritative identification of the notification
               currently being sent.  This variable occurs as
               the second varbind in every SNMPv2-Trap-PDU and
               InformRequest-PDU.
"
       ::= { snmpTrap 1 }

   --  ::= { snmpTrap 2 }   this OID is obsolete

   snmpTrapEnterprise OBJECT-TYPE
       SYNTAX     OBJECT IDENTIFIER
       MAX-ACCESS accessible-for-notify
       STATUS     current
       DESCRIPTION               "The authoritative identification of the enterprise
               associated with the trap currently being sent.  When an
               SNMP proxy agent is mapping an RFC1157 Trap-PDU
               into a SNMPv2-Trap-PDU, this variable occurs as the
               last varbind.
"
       ::= { snmpTrap 3 }

   --  ::= { snmpTrap 4 }   this OID is obsolete

   -- well-known traps

   snmpTraps      OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }

   coldStart NOTIFICATION-TYPE
       STATUS  current
       DESCRIPTION               "A coldStart trap signifies that the SNMP entity,
               supporting a notification originator application, is
               reinitializing itself and that its configuration may
               have been altered.
"
       ::= { snmpTraps 1 }

   warmStart NOTIFICATION-TYPE
       STATUS  current
       DESCRIPTION               "A warmStart trap signifies that the SNMP entity,
               supporting a notification originator application,
               is reinitializing itself such that its configuration
               is unaltered.
"
       ::= { snmpTraps 2 }

   -- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
   -- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
   -- are defined in RFC 2863 [RFC2863]

   authenticationFailure NOTIFICATION-TYPE
       STATUS  current
       DESCRIPTION               "An authenticationFailure trap signifies that the SNMP
                entity has received a protocol message that is not
                properly authenticated.  While all implementations
                of SNMP entities MAY be capable of generating this
                trap, the snmpEnableAuthenTraps object indicates
                whether this trap will be generated.
"
       ::= { snmpTraps 5 }

   -- Note the egpNeighborLoss notification is defined
   -- as { snmpTraps 6 } in RFC 1213

   -- the set group
   --
   -- a collection of objects which allow several cooperating
   -- command generator applications to coordinate their use of the
   -- set operation.

   snmpSet        OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }

   snmpSetSerialNo OBJECT-TYPE
       SYNTAX     TestAndIncr
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION               "An advisory lock used to allow several cooperating
               command generator applications to coordinate their
               use of the SNMP set operation.

               This object is used for coarse-grain coordination.
               To achieve fine-grain coordination, one or more similar
               objects might be defined within each MIB group, as
               appropriate.
"
       ::= { snmpSet 1 }

   -- conformance information

   snmpMIBConformance
                  OBJECT IDENTIFIER ::= { snmpMIB 2 }

   snmpMIBCompliances
                  OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
   snmpMIBGroups  OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }

   -- compliance statements
   --    ::= { snmpMIBCompliances 1 }      this OID is obsolete
   snmpBasicCompliance MODULE-COMPLIANCE
       STATUS  deprecated
       DESCRIPTION               "The compliance statement for SNMPv2 entities which
               implement the SNMPv2 MIB.

               This compliance statement is replaced by
               snmpBasicComplianceRev2.
"
       MODULE  -- this module
           MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                              snmpBasicNotificationsGroup }

           GROUP   snmpCommunityGroup1
           DESCRIPTION               "This group is mandatory for SNMPv2 entities which
               support community-based authentication.
"

       ::= { snmpMIBCompliances 2 }

   snmpBasicComplianceRev2 MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION               "The compliance statement for SNMP entities which
               implement this MIB module.
"
       MODULE  -- this module
           MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                              snmpBasicNotificationsGroup }

           GROUP   snmpCommunityGroup1
           DESCRIPTION               "This group is mandatory for SNMP entities which
               support community-based authentication.
"

           GROUP   snmpWarmStartNotificationGroup
           DESCRIPTION               "This group is mandatory for an SNMP entity which
               supports command responder applications, and is
               able to reinitialize itself such that its
               configuration is unaltered.
"

       ::= { snmpMIBCompliances 3 }

   -- units of conformance

   --  ::= { snmpMIBGroups 1 }           this OID is obsolete
   --  ::= { snmpMIBGroups 2 }           this OID is obsolete
   --  ::= { snmpMIBGroups 3 }           this OID is obsolete
   --  ::= { snmpMIBGroups 4 }           this OID is obsolete

   snmpGroup OBJECT-GROUP
       OBJECTS { snmpInPkts,
                 snmpInBadVersions,
                 snmpInASNParseErrs,
                 snmpSilentDrops,
                 snmpProxyDrops,
                 snmpEnableAuthenTraps }
       STATUS  current
       DESCRIPTION               "A collection of objects providing basic instrumentation
               and control of an SNMP entity.
"
       ::= { snmpMIBGroups 8 }

   snmpCommunityGroup1 OBJECT-GROUP
       OBJECTS { snmpInBadCommunityNames,
                 snmpInBadCommunityUses }
       STATUS  current
       DESCRIPTION               "A collection of objects providing basic instrumentation
               of a SNMP entity which supports community-based
               authentication.
"
       ::= { snmpMIBGroups 9 }

   snmpSetGroup OBJECT-GROUP
       OBJECTS { snmpSetSerialNo }
       STATUS  current
       DESCRIPTION               "A collection of objects which allow several cooperating
               command generator applications to coordinate their
               use of the set operation.
"
       ::= { snmpMIBGroups 5 }

   systemGroup OBJECT-GROUP
       OBJECTS { sysDescr, sysObjectID, sysUpTime,
                 sysContact, sysName, sysLocation,
                 sysServices,
                 sysORLastChange, sysORID,
                 sysORUpTime, sysORDescr }
       STATUS  current
       DESCRIPTION               "The system group defines objects which are common to all
               managed systems.
"
       ::= { snmpMIBGroups 6 }

   snmpBasicNotificationsGroup NOTIFICATION-GROUP
       NOTIFICATIONS { coldStart, authenticationFailure }
       STATUS        current
       DESCRIPTION          "The basic notifications implemented by an SNMP entity
           supporting command responder applications.
"
       ::= { snmpMIBGroups 7 }

   snmpWarmStartNotificationGroup NOTIFICATION-GROUP
      NOTIFICATIONS { warmStart }
      STATUS        current
      DESCRIPTION        "An additional notification for an SNMP entity supporting
        command responder applications, if it is able to reinitialize
        itself such that its configuration is unaltered.
"
     ::= { snmpMIBGroups 11 }

   snmpNotificationGroup OBJECT-GROUP
       OBJECTS { snmpTrapOID, snmpTrapEnterprise }
       STATUS  current
       DESCRIPTION               "These objects are required for entities
               which support notification originator applications.
"
       ::= { snmpMIBGroups 12 }

   -- definitions in RFC 1213 made obsolete by the inclusion of a
   -- subset of the snmp group in this MIB

   snmpOutPkts OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Messages which were
               passed from the SNMP protocol entity to the
               transport service.
"
       ::= { snmp 2 }

   -- { snmp 7 } is not used

   snmpInTooBigs OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were
               delivered to the SNMP protocol entity and for
               which the value of the error-status field was
               `tooBig'.
"
       ::= { snmp 8 }

   snmpInNoSuchNames OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were
               delivered to the SNMP protocol entity and for
               which the value of the error-status field was
               `noSuchName'.
"
       ::= { snmp 9 }

   snmpInBadValues OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were
               delivered to the SNMP protocol entity and for
               which the value of the error-status field was
               `badValue'.
"
       ::= { snmp 10 }

   snmpInReadOnlys OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number valid SNMP PDUs which were delivered
               to the SNMP protocol entity and for which the value
               of the error-status field was `readOnly'.  It should
               be noted that it is a protocol error to generate an
               SNMP PDU which contains the value `readOnly' in the
               error-status field, as such this object is provided
               as a means of detecting incorrect implementations of
               the SNMP.
"
       ::= { snmp 11 }

   snmpInGenErrs OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were delivered
               to the SNMP protocol entity and for which the value
               of the error-status field was `genErr'.
"
       ::= { snmp 12 }

   snmpInTotalReqVars OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of MIB objects which have been
               retrieved successfully by the SNMP protocol entity
               as the result of receiving valid SNMP Get-Request
               and Get-Next PDUs.
"
       ::= { snmp 13 }

   snmpInTotalSetVars OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of MIB objects which have been
               altered successfully by the SNMP protocol entity as
               the result of receiving valid SNMP Set-Request PDUs.
"
       ::= { snmp 14 }

   snmpInGetRequests OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Request PDUs which
               have been accepted and processed by the SNMP
               protocol entity.
"
       ::= { snmp 15 }

   snmpInGetNexts OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Next PDUs which have been
               accepted and processed by the SNMP protocol entity.
"
       ::= { snmp 16 }

   snmpInSetRequests OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Set-Request PDUs which
               have been accepted and processed by the SNMP protocol
               entity.
"
       ::= { snmp 17 }

   snmpInGetResponses OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Response PDUs which
               have been accepted and processed by the SNMP protocol
               entity.
"
       ::= { snmp 18 }

   snmpInTraps OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Trap PDUs which have been
               accepted and processed by the SNMP protocol entity.
"
       ::= { snmp 19 }

   snmpOutTooBigs OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were generated
               by the SNMP protocol entity and for which the value
               of the error-status field was `tooBig.'
"
       ::= { snmp 20 }

   snmpOutNoSuchNames OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were generated
               by the SNMP protocol entity and for which the value
               of the error-status was `noSuchName'.
"
       ::= { snmp 21 }

   snmpOutBadValues OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were generated
               by the SNMP protocol entity and for which the value
               of the error-status field was `badValue'.
"
       ::= { snmp 22 }

   -- { snmp 23 } is not used

   snmpOutGenErrs OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP PDUs which were generated
               by the SNMP protocol entity and for which the value
               of the error-status field was `genErr'.
"
       ::= { snmp 24 }

   snmpOutGetRequests OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Request PDUs which
               have been generated by the SNMP protocol entity.
"
       ::= { snmp 25 }

   snmpOutGetNexts OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Next PDUs which have
               been generated by the SNMP protocol entity.
"
       ::= { snmp 26 }

   snmpOutSetRequests OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Set-Request PDUs which
               have been generated by the SNMP protocol entity.
"
       ::= { snmp 27 }

   snmpOutGetResponses OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Get-Response PDUs which
               have been generated by the SNMP protocol entity.
"
       ::= { snmp 28 }

   snmpOutTraps OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      obsolete
       DESCRIPTION               "The total number of SNMP Trap PDUs which have
               been generated by the SNMP protocol entity.
"
       ::= { snmp 29 }

   snmpObsoleteGroup OBJECT-GROUP
       OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
                 snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
                 snmpInTotalReqVars, snmpInTotalSetVars,
                 snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
                 snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
                 snmpOutNoSuchNames, snmpOutBadValues,
                 snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
                 snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
                 }
       STATUS  obsolete
       DESCRIPTION               "A collection of objects from RFC 1213 made obsolete
               by this MIB module.
"
       ::= { snmpMIBGroups 10 }

END





                
                
            
			
        
   
Help  |  Feedback