Guest

Tools & Resources

SNMP Object Navigator


CISCO-VTP-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-VTP-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    4. SNMPv2-MIB Download  |  Download  |  View Dependencies
    5. CISCO-SMI Download  |  Download  |  View Dependencies
    6. IANAifType-MIB Download  |  Download  |  View Dependencies
    7. IF-MIB Download  |  Download  |  View Dependencies
    8. CISCO-TC Download  |  Download  |  View Dependencies
    9. INET-ADDRESS-MIB Download  |  Download  |  View Dependencies
    10. SNMP-FRAMEWORK-MIB Download  |  Download  |  View Dependencies
    11. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    12. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    13. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    14. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    15. RMON-MIB Download  |  Download  |  View Dependencies
    16. CISCO-VTP-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-VTP-MIB.oid
Capability File: CISCO-VTP-CAPABILITY

Extra Information

None

MIB Contents

This is the SMI version 2 of the MIB. Click here to see the SMI version 1
        
		
            
                
                    


-- *****************************************************************
-- Cisco VTP MIB
--   
-- February, 1997 Chris Young
-- April, 2003  Wen Xu
-- July, 2003  Wen Xu
-- August, 2003  Wen Xu
-- November, 2003  Wen Xu
-- February, 2004  Wen Xu
--   
-- Copyright (c) 1996-2002, 2003, 2004, 2006-2008, 2009-2010 by Cisco
-- Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--   

CISCO-VTP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Counter32,
    IpAddress,
    Gauge32,
    Integer32,
    Unsigned32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    RowStatus,
    DisplayString,
    DateAndTime,
    TruthValue,
    TestAndIncr,
    TimeStamp
        FROM SNMPv2-TC
    InterfaceIndex,
    ifIndex,
    InterfaceIndexOrZero
        FROM IF-MIB
    OwnerString
        FROM RMON-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    Cisco2KVlanList
        FROM CISCO-TC
    ciscoMgmt
        FROM CISCO-SMI;


ciscoVtpMIB MODULE-IDENTITY
    LAST-UPDATED    "201005120000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-wbu@cisco.com, 
                    cs-lan-switch-snmp@cisco.com"
    DESCRIPTION        "The MIB module for entities implementing the VTP
        protocol and Vlan management.
"
    REVISION        "201005120000Z"
    DESCRIPTION        "Added vlanTrunkPortActiveVlansGroup.
        Updated the description of vtpServerDisabled.
"
    REVISION        "200912030000Z"
    DESCRIPTION        "Added vtpTrunkPruningGroup3 and
        vtpConfigNotificationsGroup8. Modified the
        description of vtpNotificationsEnabled and
        managementDomainPruningState.
"
    REVISION        "200803070000Z"
    DESCRIPTION        "Added vlanStatsGroup. Deprecated
        vtpConfigNotificationsGroup5 and replaced
        it with vtpConfigNotificationsGroup6 and
        vtpConfigNotificationsGroup7.
"
    REVISION        "200710040000Z"
    DESCRIPTION        "Correct the descriptions of the object
        vtpConfigDigestErrors and the tables vtpVlanTable
        and vtpInternalVlanTable.
"
    REVISION        "200602170000Z"
    DESCRIPTION        "Removed the OwnerString TEXTUAL-CONVENTION and
        imported the same from RMON-MIB.
"
    REVISION        "200402110000Z"
    DESCRIPTION        "Added 'dynamicGvrp(4)' for the TC VlanTypeExt.
"
    REVISION        "200311210000Z"
    DESCRIPTION        "Add vtpInternalVlanGrp to configure internal
        VLANs' allocation policy and show the owner 
        application names.
"
    REVISION        "200308080000Z"
    DESCRIPTION        "Split vtpConfigNotificationsGroup into two groups:
        vtpConfigNotificationsGroupRev1 and 
        vtpConfigNotificationsGroup5. Write a new compliance
        statement to list vtpConfigNotificationsGroupRev1 in
        instead of vtpConfigNotificationsGroup in the 
        MANDATORY-GROUPS.
"
    REVISION        "200307110000Z"
    DESCRIPTION        "Modify the description of the TC VlanIndex.
"
    REVISION        "200304160000Z"
    DESCRIPTION        "Add support for VTP version 3 features.
        -- Add enumerators and modify the 'DESCRIPTION' of 6 
           existing objects: 
           vtpVersion, managementDomainLocalMode,
           managementDomainConfigRevNumber, 
           managementDomainLastUpdater,
           managementDomainLastChange,  
           managementDomainVersionInUse.
        -- Add 3 new groups: vtpAuthGroup, 
           vtpDiscoverGroup, vtpDatabaseGroup.
"
    REVISION        "200204100000Z"
    DESCRIPTION        "-- Add 4 new notifications/traps vtpLocalModeChanged,
        vtpVersionInUseChanged, vtpVlanCreated and 
        vtpVlanDeleted. 
        -- Add 2 new objects vtpVlanCreatedNotifEnabled and 
        vtpVlanDeletedNotifEnabled to control the
        generation of vtpVlanCreated and vtpVlanDeleted.
        -- Use vtpNotificationsEnabled to control the
        generation of vtpLocalModeChanged and
        vtpVersionInUseChanged by grouping them in a
        new group vtpConfigNotificationsGroup2.  
        -- Deprecate the object vlanTrunkPortsDot1qTag and
        its related group.
"
    REVISION        "200202280000Z"
    DESCRIPTION        "Deprecate the object, vlanTrunkPortDot1qTunnel.
"
    REVISION        "200108030000Z"
    DESCRIPTION        "Add a new off(4) mode to managementDomainLocalMode.
"
    REVISION        "200102260000Z"
    DESCRIPTION        "Deprecate read-only object vtpVlanEditTypeExt and
        add a new read-create object vtpVlanEditTypeExt2.
        Enable Notification groups.
"
    REVISION        "200102120000Z"
    DESCRIPTION        "Added Remote SPAN (RSPAN) VLAN feature, VLAN
        management features without supporting VTP protocol
        and a new object to handle one-VLAN-editing.
"
    REVISION        "200009190000Z"
    DESCRIPTION        "Added the mapping from VLAN ID to its corresponding
        ifIndex
"
    REVISION        "200004100000Z"
    DESCRIPTION        "Added 4k VLAN editing and Dot1qTunnel support
"
    REVISION        "200001060000Z"
    DESCRIPTION        "Added 4k VLAN support
"
    REVISION        "9902251130Z"
    DESCRIPTION        "Added import of NOTIFICATION-GROUP
"
    REVISION        "9901051130Z"
    DESCRIPTION        "Added support for encapsulation type notApplicable
"
    REVISION        "9805191130Z"
    DESCRIPTION        "Added support for encapsulation type negotiation
"
    REVISION        "9708081138Z"
    DESCRIPTION        "Added Backup CRF object
"
    REVISION        "9705091130Z"
    DESCRIPTION        "Added ARE and STE hop counts.
"
    REVISION        "9702241115Z"
    DESCRIPTION        "Added support for turning on VTP for Trunk cards.
"
    REVISION        "9701271730Z"
    DESCRIPTION        "Added support for version 2 features.
"
    REVISION        "9609161230Z"
    DESCRIPTION        "Updated the Token-Ring support.
"
    REVISION        "9607171230Z"
    DESCRIPTION        "Updated to include objects in support of VTP pruning.
"
    REVISION        "9601181820Z"
    DESCRIPTION        "Initial version of this MIB module.
"
    ::= { ciscoMgmt 46 }


vtpMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoVtpMIB 1 }


-- Textual Conventions

VlanIndex ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The VLAN-id of a VLAN on ISL or 802.1q trunks.

        Modification of default parameters is allowed.
        Implementations are allowed to restrict
        the range of VLANs.

        For entities support up to 1024 VLANS.
        VLANs above 1000 are reserved for default VLANs and
        future use. Modification of default parameters is
        allowed. Creation or deletion of VLANs above 1000 is not
        allowed.

        For a new object which needs the vlan-id of a VLAN as
        its SYNTAX, it is suggested to import VlanIndex from
        Q-BRIDGE-MIB instead of importing this TC here in 
        CISCO-VTP-MIB.
"
    SYNTAX          Integer32 (0..4095)

ManagementDomainIndex ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "An arbitrary integer-value to uniquely identify a
        management domain on the local system.
"
    SYNTAX          Integer32 (1..255)

VlanType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The type of a VLAN.

        Note that the 'ethernet' type, is used for any ethernet or
        802.3 VLAN, including an ATM Ethernet ELAN; and the
        'tokenRing' ('trCrf') type is used for each VLAN
        representing a single logical 802.5 ring including an ATM
        Token-Ring ELAN.

        The 'trCrf' type is used for token ring VLANs made up of
        (at most) one transparently bridged LAN segment.

        The 'trBrf' type is used for VLANs which represent the
        scope of many 'trCrf' VLANs all connected together via
        source route bridging.  The token ring 'trBrf' can be said
        to represent the bridged broadcast domain.
"
    SYNTAX          INTEGER  {
                        ethernet(1),
                        fddi(2),
                        tokenRing(3), -- also known as trCrf
                        fddiNet(4),
                        trNet(5), -- also known as trBrf
                        deprecated(6)
                    }

VlanTypeExt ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION        "The additional type information of VLAN.
        vtpmanageable(0)    An user defined VLAN which is 
                            manageable through VTP protocol.
                            The value of this bit cannot be 
                            changed.
        internal(1)         An internal VLAN created by the device.
                            Internal VLANs cannot be created or
                            deleted. The value of this bit cannot
                            be changed.
        reserved(2)         A VLAN reserved by the device.
                            Reserved VLANs cannot be created or
                            deleted. The value of this bit cannot
                            be changed.
        rspan(3)            A VLAN created to exclusively carry
                            the traffic for a Remote Switched
                            Port Analyzer (RSPAN). This bit can
                            only be set or cleared during the
                            VLAN creation. Once the VLAN is
                            created, the value of this bit cannot
                            be modified.
        dynamicGvrp(4)      A VLAN dynamically created by GVRP
                            (GARP VLAN Registration Protocol)
                            propagation. The value of this bit 
                            cannot be changed.
"

    REFERENCE       "RFC2674."
    SYNTAX          BITS {
                        vtpmanageable(0),
                        internal(1),
                        reserved(2),
                        rspan(3),
                        dynamicGvrp(4)
                    }
-- VTP status

vtpStatus  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 1 }


vtpVersion OBJECT-TYPE
    SYNTAX          INTEGER  {
                        one(1),
                        two(2),
                        none(3),
                        three(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The version of VTP in use on the local system.  A device
        will report its version capability and not any particular
        version in use on the device. If the device does not support
        vtp, the version is none(3).
" 
    ::= { vtpStatus 1 }

vtpMaxVlanStorage OBJECT-TYPE
    SYNTAX          Integer32 (-1..1023)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "An estimate of the maximum number of VLANs about which the
        local system can recover complete VTP information after a
        reboot.  If the number of defined VLANs is greater than this
        value, then the system can not act as a VTP Server. For a
        device which has no means to calculate the estimated number,
        this value is -1.
" 
    ::= { vtpStatus 2 }

vtpNotificationsEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "An indication of whether the notifications/traps defined by
        the vtpConfigNotificationsGroup, vtpConfigNotificationsGroup2,
        and vtpConfigNotificationsGroup8 are enabled.
" 
    ::= { vtpStatus 3 }

vtpVlanCreatedNotifEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "An indication of whether the notification should
        be generated when a VLAN is created. 

        If the value of this object is 'true' then the
        vtpVlanCreated notification will be generated.

        If the value of this object is 'false' then the
        vtpVlanCreated notification will not be generated.
" 
    ::= { vtpStatus 4 }

vtpVlanDeletedNotifEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "An indication of whether the notification should
        be generated when a VLAN is deleted.  

        If the value of this object is 'true' then the
        vtpVlanDeleted notification will be generated.

        If the value of this object is 'false' then the
        vtpVlanDeleted notification will not be generated.
" 
    ::= { vtpStatus 5 }
-- VTP Management Domains

vlanManagementDomains  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 2 }


managementDomainTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF ManagementDomainEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The table containing information on the management domains
        in which the local system is participating.  Devices which
        support only one management domain will support just one row
        in this table, and will not let it be deleted nor let other
        rows be created.  Devices which support multiple management
        domains will allow rows to be created and deleted, but will
        not allow the last row to be deleted. If the device does 
        not support VTP, the table is read-only.
"
    ::= { vlanManagementDomains 1 }

managementDomainEntry OBJECT-TYPE
    SYNTAX          ManagementDomainEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about the status of one management domain.
"
    INDEX           { managementDomainIndex } 
    ::= { managementDomainTable 1 }

ManagementDomainEntry ::= SEQUENCE {
        managementDomainIndex            ManagementDomainIndex,
        managementDomainName             DisplayString,
        managementDomainLocalMode        INTEGER,
        managementDomainConfigRevNumber  Gauge32,
        managementDomainLastUpdater      IpAddress,
        managementDomainLastChange       DateAndTime,
        managementDomainRowStatus        RowStatus,
        managementDomainTftpServer       IpAddress,
        managementDomainTftpPathname     DisplayString,
        managementDomainPruningState     INTEGER,
        managementDomainVersionInUse     INTEGER,
        managementDomainPruningStateOper INTEGER
}

managementDomainIndex OBJECT-TYPE
    SYNTAX          ManagementDomainIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "An arbitrary value to uniquely identify the management
        domain on the local system.
" 
    ::= { managementDomainEntry 1 }

managementDomainName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (0..32))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The management name of a domain in which the local system
        is participating.  The zero-length name corresponds to the
        'no management-domain' state which is the initial value at
        installation-time if not configured otherwise.  Note that
        the zero-length name does not correspond to an operational
        management domain, and a device does not send VTP
        advertisements while in the 'no management-domain' state.  A
        device leaves the 'no management-domain' state when it
        obtains a management-domain name, either through
        configuration or through inheriting the management-domain
        name from a received VTP advertisement.

        When the value of an existing instance of this object is
        modified by network management, the local system should re-
        initialize its VLAN information (for the given management
        domain) as if it had just been configured with a management
        domain name at installation time.
" 
    ::= { managementDomainEntry 2 }

managementDomainLocalMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3),
                        off(4)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The local VTP mode in this management domain when
        managementDomainVersionInUse is version1(1) or
        version2(2).

        If managementDomainVersionInUse is version3(4), this 
        object has the same value with vtpDatabaseLocalMode 
        of VLAN database type.

        - 'client' indicates that the local system is acting
          as a VTP client.

        - 'server' indicates that the local system is acting
          as a VTP server.

        - 'transparent' indicates that the local system does
          not generate or listen to VTP messages, but forwards
          messages. This mode can also be set by the device
          itself when the amount of VLAN information is too
          large for it to hold in DRAM.

        - 'off' indicates that the local system does not
          generate, listen to or forward any VTP messages.
" 
    ::= { managementDomainEntry 3 }

managementDomainConfigRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The current Configuration Revision Number as known by
        the local device for this management domain when 
        managementDomainVersionInUse is version1(1) or 
        version2(2).

        If managementDomainVersionInUse is version3(4), this 
        object has the same value with vtpDatabaseRevisionNumber 
        of VLAN database type.

        This value is updated (if necessary) whenever a VTP
        advertisement is received or generated. When in the
        'no management-domain' state, this value is 0.
" 
    ::= { managementDomainEntry 4 }

managementDomainLastUpdater OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The IP-address (or one of them) of the VTP Server which
        last updated the Configuration Revision Number, as indicated
        in the most recently received VTP advertisement for this
        management domain, when managementDomainVersionInUse is
        version1(1) or version2(2). 

        If managementDomainVersionInUse is version3(4), this object
        has the value of 0.0.0.0.

        Before an advertisement has been received, this value is
        0.0.0.0.
" 
    ::= { managementDomainEntry 5 }

managementDomainLastChange OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The time at which the Configuration Revision Number was
        (last) increased to its current value, as indicated in the
        most recently received VTP advertisement for this management
        domain when managementDomainVersionInUse is not version3(4)
        or in the most recently received VTP VLAN database 
        advertisement for this management domain when 
        managementDomainVersionInUse is version3(4).

        The value 0x0000010100000000 indicates that the device which
        last increased the Configuration Revision Number had no idea
        of the date/time, or that no advertisement has been
        received.
" 
    ::= { managementDomainEntry 6 }

managementDomainRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
   DESCRIPTION        "The status of this conceptual row.
"
    ::= { managementDomainEntry 7 }

managementDomainTftpServer OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The IP address of a TFTP Server in/from which VTP VLAN
        information for this management domain is to be
        stored/retrieved.  If the information is being locally
        stored in NVRAM, this object should take the value 0.0.0.0.
" 
    ::= { managementDomainEntry 8 }

managementDomainTftpPathname OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The complete pathname of the file at the TFTP Server
        identified by the value of managementDomainTftpServer
        in/from which VTP VLAN information for this management
        domain is to be stored/retrieved.  If the value of
        corresponding instance of managementDomainTftpServer is
        0.0.0.0, the value of this object is ignored.
" 
    ::= { managementDomainEntry 9 }

managementDomainPruningState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        enabled(1),
                        disabled(2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "An indication of whether VTP pruning is enabled or disabled
        in this managament domain. 

        This object can only be modified, either when the 
        corresponding instance value of managementDomainVersionInUse 
        is 'version1' or 'version2' and the corresponding instance 
        value of managementDomainLocalMode is 'server', or when the 
        corresponding instance value of managementDomainVersionInUse 
        is 'version3' and the corresponding instance value of 
        managementDomainLocalMode is 'server' or 'client'.
" 
    ::= { managementDomainEntry 10 }

managementDomainVersionInUse OBJECT-TYPE
    SYNTAX          INTEGER  {
                        version1(1),
                        version2(2),
                        none(3),
                        version3(4)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The current version of the VTP that is in use by the
        designated management domain. 

        This object can be set to none(3) only when 
        vtpVersion is none(3).
" 
    ::= { managementDomainEntry 11 }

managementDomainPruningStateOper OBJECT-TYPE
    SYNTAX          INTEGER  {
                        enabled(1),
                        disabled(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Indicates whether VTP pruning is operationally enabled or
        disabled in this managament domain.
" 
    ::= { managementDomainEntry 12 }
 

-- VLAN information

vlanInfo  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 3 }

-- Global information on current VLANs
--   
-- This information is maintained by VTP Clients and VTP Servers

vtpVlanTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpVlanEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table contains information on the VLANs which
        currently exist.
"
    ::= { vlanInfo 1 }

vtpVlanEntry OBJECT-TYPE
    SYNTAX          VtpVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about one current VLAN.  The
        managementDomainIndex value in the INDEX clause indicates
        which management domain the VLAN is in.
"
    INDEX           {
                        managementDomainIndex,
                        vtpVlanIndex
                    } 
    ::= { vtpVlanTable 1 }

VtpVlanEntry ::= SEQUENCE {
        vtpVlanIndex              VlanIndex,
        vtpVlanState              INTEGER,
        vtpVlanType               VlanType,
        vtpVlanName               DisplayString,
        vtpVlanMtu                Integer32,
        vtpVlanDot10Said          OCTET STRING,
        vtpVlanRingNumber         Integer32,
        vtpVlanBridgeNumber       Integer32,
        vtpVlanStpType            INTEGER,
        vtpVlanParentVlan         VlanIndex,
        vtpVlanTranslationalVlan1 VlanIndex,
        vtpVlanTranslationalVlan2 VlanIndex,
        vtpVlanBridgeType         INTEGER,
        vtpVlanAreHopCount        Integer32,
        vtpVlanSteHopCount        Integer32,
        vtpVlanIsCRFBackup        TruthValue,
        vtpVlanTypeExt            VlanTypeExt,
        vtpVlanIfIndex            InterfaceIndexOrZero
}

vtpVlanIndex OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
   DESCRIPTION        "The VLAN-id of this VLAN on ISL or 802.1q trunks.
"
    ::= { vtpVlanEntry 1 }

vtpVlanState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        operational(1),
                        suspended(2),
                        mtuTooBigForDevice(3),
                        mtuTooBigForTrunk(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The state of this VLAN.

        The state 'mtuTooBigForDevice' indicates that this device
        cannot participate in this VLAN because the VLAN's MTU is
        larger than the device can support.

        The state 'mtuTooBigForTrunk' indicates that while this
        VLAN's MTU is supported by this device, it is too large for
        one or more of the device's trunk ports.
" 
    ::= { vtpVlanEntry 2 }

vtpVlanType OBJECT-TYPE
    SYNTAX          VlanType
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The type of this VLAN.
"
    ::= { vtpVlanEntry 3 }

vtpVlanName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (1..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The name of this VLAN.  This name is used as the ELAN-name
        for an ATM LAN-Emulation segment of this VLAN.
" 
    ::= { vtpVlanEntry 4 }

vtpVlanMtu OBJECT-TYPE
    SYNTAX          Integer32 (1500..18190)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The MTU size on this VLAN, defined as the size of largest
        MAC-layer (information field portion of the) data frame
        which can be transmitted on the VLAN.
" 
    ::= { vtpVlanEntry 5 }

vtpVlanDot10Said OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (4))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The value of the 802.10 SAID field for this VLAN.
"
    ::= { vtpVlanEntry 6 }

vtpVlanRingNumber OBJECT-TYPE
    SYNTAX          Integer32 (0..4095)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The ring number of this VLAN.  This object is only
        instantiated when the value of the corresponding instance of
        vtpVlanType has a value of 'fddi' or 'tokenRing' and Source
        Routing is in use on this VLAN.
" 
    ::= { vtpVlanEntry 7 }

vtpVlanBridgeNumber OBJECT-TYPE
    SYNTAX          Integer32 (0..15)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The bridge number of the VTP-capable switches for this
        VLAN.  This object is only instantiated for VLANs that are
        involved with emulating token ring segments.
" 
    ::= { vtpVlanEntry 8 }

vtpVlanStpType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ieee(1),
                        ibm(2),
                        hybrid(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The type of the Spanning Tree Protocol (STP) running on
        this VLAN.  This object is only instanciated when the
        value of the corresponding instance of vtpVlanType has a
        value of 'fddiNet' or 'trNet'.

        The value returned by this object depends upon the value
        of the corresponding instance of vtpVlanEditStpType.

        - 'ieee' indicates IEEE STP is running exclusively.

        - 'ibm' indicates IBM STP is running exclusively.

        - 'hybrid' indicates a STP that allows a combination of
          IEEE and IBM is running.

        The 'hybrid' STP type results from tokenRing/fddi VLANs
        that are children of this trNet/fddiNet parent VLAN being
        configured in a combination of SRT and SRB
        vtpVlanBridgeTypes while the instance of
        vtpVlanEditStpType that corresponds to this object is set
        to 'auto'.
" 
    ::= { vtpVlanEntry 9 }

vtpVlanParentVlan OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The parent VLAN for this VLAN.  This object is only
        instantiated when the value of the corresponding instance of
        vtpVlanType has a value of 'fddi' or 'tokenRing' and Source
        Routing is in use on this VLAN.  The parent VLAN must have 
        a vtpVlanType value of fddiNet(4) or trNet(5), 
        respectively.
" 
    ::= { vtpVlanEntry 10 }

vtpVlanTranslationalVlan1 OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A VLAN to which this VLAN is being translational-bridged.
        If this value and the corresponding instance of
        vtpVlanTranslationalVlan2 are both zero, then this VLAN is
        not being translational-bridged.
" 
    ::= { vtpVlanEntry 11 }

vtpVlanTranslationalVlan2 OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Another VLAN, i.e., other than that indicated by
        vtpVlanTranslationalVlan1, to which this VLAN is being
        translational-bridged.  If this value and the corresponding
        instance of vtpVlanTranslationalVlan1 are both zero, then
        this VLAN is not being translational-bridged.
" 
    ::= { vtpVlanEntry 12 }

vtpVlanBridgeType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        srt(1),
                        srb(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The type of the Source Route bridging mode in use on this
        VLAN.  This object is only instantiated when the value of 
        the corresponding instance of vtpVlanType has a value of 
        fddi(2) or tokenRing(3) and Source Routing is in use on
        this VLAN.
" 
    ::= { vtpVlanEntry 13 }

vtpVlanAreHopCount OBJECT-TYPE
    SYNTAX          Integer32 (1..13)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The maximum number of bridge hops allowed in
        All Routes Explorer frames on this VLAN.  This
        object is only instantiated when the value of the
        corresponding instance of vtpVlanType has a value of fddi(2)
        or tokenRing(3) and Source Routing is in use on this VLAN.
" 
    ::= { vtpVlanEntry 14 }

vtpVlanSteHopCount OBJECT-TYPE
    SYNTAX          Integer32 (1..13)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The maximum number of bridge hops allowed in
        Spanning Tree Explorer frames on this VLAN.  This
        object is only instantiated when the value of the
        corresponding instance of vtpVlanType has a value of fddi(2)
        or tokenRing(3) and Source Routing is in use on this VLAN.
" 
    ::= { vtpVlanEntry 15 }

vtpVlanIsCRFBackup OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "True if this VLAN is of type trCrf and also is acting as
        a backup trCrf for the ISL distributed BRF
" 
    ::= { vtpVlanEntry 16 }

vtpVlanTypeExt OBJECT-TYPE
    SYNTAX          VlanTypeExt
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The additional type information of this VLAN.
"
    ::= { vtpVlanEntry 17 }

vtpVlanIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The value of the ifIndex corresponding to this VLAN ID.
        If the VLAN ID does not have its corresponding interface, 
        this object has the value of zero.
" 
    ::= { vtpVlanEntry 18 }
 

internalVlanInfo  OBJECT IDENTIFIER
    ::= { vlanInfo 2 }


vtpInternalVlanAllocPolicy OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ascending(1),
                        descending(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "The internal VLAN allocation policy.

        'ascending'  - internal VLANs are allocated
                       starting from a lowwer VLAN ID and 
                       upwards.
        'descending' - internal VLANs are allocated
                       starting from a higher VLAN ID and
                       downwards.
" 
    ::= { internalVlanInfo 1 }

vtpInternalVlanTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpInternalVlanEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "A vtpInternalVlanTable entry contains
        information on an existing internal
        VLAN. It is internally created by the
        device for a specific application program 
        and hence owned by the application.  
        It cannot be modified or deleted by (local 
        or network) management.
"
    ::= { internalVlanInfo 2 }

vtpInternalVlanEntry OBJECT-TYPE
    SYNTAX          VtpInternalVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about one current internal
        VLAN.
"
    INDEX           {
                        managementDomainIndex,
                        vtpVlanIndex
                    } 
    ::= { vtpInternalVlanTable 1 }

VtpInternalVlanEntry ::= SEQUENCE {
        vtpInternalVlanOwner SnmpAdminString
}

vtpInternalVlanOwner OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The program name of the internal VLAN's
        owner application. This internal VLAN
        is allocated by the device specifically
        for this application and no one else
        could create, modify or delete this 
        VLAN.
" 
    ::= { vtpInternalVlanEntry 1 }
 

-- Modification of Global VLAN Information
--   
-- To change the global information on current VLANs, including
-- creating, modifying or deleting them,
-- . the current VLAN information is copied to the "Edit buffer",
-- . the information in the Edit buffer is modified as appropriate,
-- . an 'apply' is invoked to attempt to instanciate the modified
-- contents of the Edit Buffer as the new global VLAN information.
--   
-- Only one manager can edit the Edit Buffer at a time.  So, a
-- request to copy the current VLAN information into the Edit Buffer
-- must fail if the Edit Buffer is already in use (i.e., is not empty).
-- Thus, concurrent attempts by multiple managers to gain use of the
-- Edit Buffer are resolved according to whichever of them succeeds
-- in performing a successful copy.  An OwnerString object provides
-- information on which manager currently has access.
--   
-- Ownership of the Edit Buffer terminates when a NMS explicitly
-- releases it, or when a deadman-timer expires.  The deadman-timer
-- has a fixed expiry interval of 5 minutes.  The deadman-timer is
-- automatically started on a successful copy operation.  The
-- restartTimer operation allows an NMS to restart the deadman-timer
-- if it wishes to retain ownership of the Edit Buffer for longer
-- than 5 minutes.  The deadman-timer ceases when the apply operation
-- is invoked, and is restarted when the apply operation terminates.
-- Restarting the deadman-timer after termination of the apply
-- operation allows the results of the apply operation to be retained
-- until the requesting manager has retrieved them, but for only a
-- limited amount of time.
--   
-- When managementDomainVersionInUse is version1(1) or version2(2),
-- the local device with managementDomainLocalMode as server(2)
-- could change the global VLAN configuration by editing the VLAN
-- information in the edit buffer and then apply it. However,
-- when managementDomainVersionInUse is in version3(4), there
-- are two different VTP servers, the primary server and the
-- secondary server. The global VLAN configuration could only
-- be changed by a primary server for VLAN database. The
-- secondary server may still do the 'copy' operation and edit
-- the VLAN information in the edit buffer. But in order to make
-- a possibly successful 'apply' operation, the local device must
-- be a VLAN database primary server. Otherwise, the 'apply' will
-- fail and vtpVlanApplyStatus will be set to the error status
-- 'notPrimaryServer'.

vlanEdit  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 4 }


vtpEditControlTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpEditControlEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table provides the means to control the editing of the
        VLANs for a particular management domain.  Each and every
        entry in this table augments its corresponding entry in the
        managementDomainTable; thus, an entry in this table is
        created/deleted only as a by-product of creating/deleting an
        entry in the managementDomainTable.
"
    ::= { vlanEdit 1 }

vtpEditControlEntry OBJECT-TYPE
    SYNTAX          VtpEditControlEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Control information for editing the VLANs in one management
        domain.
"
    AUGMENTS           { managementDomainEntry  } 
    ::= { vtpEditControlTable 1 }

VtpEditControlEntry ::= SEQUENCE {
        vtpVlanEditOperation       INTEGER,
        vtpVlanApplyStatus         INTEGER,
        vtpVlanEditBufferOwner     OwnerString,
        vtpVlanEditConfigRevNumber Gauge32,
        vtpVlanEditModifiedVlan    VlanIndex
}

vtpVlanEditOperation OBJECT-TYPE
    SYNTAX          INTEGER  {
                        none(1),
                        copy(2),
                        apply(3),
                        release(4),
                        restartTimer(5)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "This object always has the value 'none' when read.  When
        written, each value causes the appropriate action:

         'copy' - causes the creation of rows in the
        vtpVlanEditTable exactly corresponding to the current global
        VLAN information for this management domain.  If the Edit
        Buffer (for this management domain) is not currently empty,
        a copy operation fails.  A successful copy operation starts
        the deadman-timer.

         'apply' - first performs a consistent check on the the
        modified information contained in the Edit Buffer, and if
        consistent, then tries to instanciate the modified
        information as the new global VLAN information.  Note that
        an empty Edit Buffer (for the management domain) would
        always result in an inconsistency since the default VLANs
        are required to be present.

         'release' - flushes the Edit Buffer (for this management
        domain), clears the Owner information, and aborts the
        deadman-timer.  A release is generated automatically if the
        deadman-timer ever expires.

         'restartTimer' - restarts the deadman-timer.

         'none' - no operation is performed.
" 
    ::= { vtpEditControlEntry 1 }

vtpVlanApplyStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        inProgress(1),
                        succeeded(2),
                        configNumberError(3),
                        inconsistentEdit(4),
                        tooBig(5),
                        localNVStoreFail(6),
                        remoteNVStoreFail(7),
                        editBufferEmpty(8),
                        someOtherError(9),
                        notPrimaryServer(10)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The current status of an 'apply' operation to instanciate
        the Edit Buffer as the new global VLAN information (for this
        management domain).  If no apply is currently active, the
        status represented is that of the most recently completed
        apply.  The possible values are:

           inProgress - 'apply' operation in progress;

           succeeded - the 'apply' was successful (this value is
                  also used when no apply has been invoked since the
                  last time the local system restarted);

           configNumberError - the apply failed because the value of
                  vtpVlanEditConfigRevNumber was less or equal to
                  the value of current value of 
                  managementDomainConfigRevNumber;

           inconsistentEdit - the apply failed because the modified
                  information was not self-consistent;

           tooBig - the apply failed because the modified
                  information was too large to fit in this VTP
                  Server's non-volatile storage location;

           localNVStoreFail - the apply failed in trying to store
                  the new information in a local non-volatile
                  storage location;

           remoteNVStoreFail - the apply failed in trying to store
                  the new information in a remote non-volatile
                  storage location;

           editBufferEmpty - the apply failed because the Edit
                  Buffer was empty (for this management domain).

           someOtherError - the apply failed for some other reason
                  (e.g., insufficient memory).

           notPrimaryServer - the apply failed because the local 
                  device is not a VTP primary server for VLAN 
                  database type when managementDomainVersionInUse
                  is version3(4).
" 
    ::= { vtpEditControlEntry 2 }

vtpVlanEditBufferOwner OBJECT-TYPE
    SYNTAX          OwnerString
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The management station which is currently using the Edit
        Buffer for this management domain.  When the Edit Buffer for
        a management domain is not currently in use, the value of
        this object is the zero-length string.  Note that it is also
        the zero-length string if a manager fails to set this object
        when invoking a copy operation.
" 
    ::= { vtpEditControlEntry 3 }

vtpVlanEditConfigRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The Configuration Revision Number to be used for the next
        apply operation.  This value is initialized (by the agent)
        on a copy operation to be one greater than the value of
        managementDomainConfigRevNumber. On an apply, if the 
        number is less or equal to the value of 
        managementDomainConfigRevNumber, then the apply fails.
        The value can be modified (increased) by network management
        before an apply to ensure that an apply does not fail for 
        this reason.

        This object is used to allow management control over whether
        a configuration revision received via a VTP advertisement
        after a copy operation but before the succeeding apply
        operation is lost by being overwritten by the (local) edit
        operation.  By default, the apply operation will fail in
        this situation.  By increasing this object's value after the
        copy but before the apply, management can control whether
        the apply is to succeed (with the update via VTP
        advertisement being lost).
" 
    ::= { vtpEditControlEntry 4 }

vtpVlanEditModifiedVlan OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The VLAN-id of the modified VLAN in the Edit Buffer.
        If the object has the value of zero, any VLAN can 
        be edited. If the value of the object is not zero,
        only this VLAN can be edited.

        The object's value is reset to zero after a successful
        'apply' operation or a 'release' operation. 

        This object is only supported for devices which allow 
        only one VLAN editing for each 'apply' operation. For
        devices which allow multiple VLAN editing for each
        'apply' operation, this object is not supported.
" 
    ::= { vtpEditControlEntry 5 }
 


vtpVlanEditTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpVlanEditEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The table which contains the information in the Edit
        Buffers, one Edit Buffer per management domain.  The
        information for a particular management domain is
        initialized, by a 'copy' operation, to be the current global
        VLAN information for that management domain.  After
        initialization, editing can be performed to add VLANs,
        delete VLANs, or modify their global parameters.  The
        information as modified through editing is local to this
        Edit Buffer.  An apply operation using the
        vtpVlanEditOperation object is necessary to instanciate the
        modified information as the new global VLAN information for
        that management domain.

        To use the Edit Buffer, a manager acts as follows:

        1. ensures the Edit Buffer for a management domain is empty,
        i.e., there are no rows in this table for this management
        domain.

        2. issues a SNMP set operation which sets
        vtpVlanEditOperation to 'copy', and vtpVlanEditBufferOwner
        to its own identifier (e.g., its own IP address).

        3. if this set operation is successful, proceeds to edit the
        information in the vtpVlanEditTable.

        4. if and when the edited information is to be instantiated,
        issues a SNMP set operation which sets vtpVlanEditOperation
        to 'apply'.

        5. issues retrieval requests to obtain the value of
        vtpVlanApplyStatus, until the result of the apply is
        determined.

        6. releases the Edit Buffer by issuing a SNMP set operation
        which sets vtpVlanEditOperation to 'release'.

        Note that the information contained in this table is not
        saved across agent reboots.
"
    ::= { vlanEdit 2 }

vtpVlanEditEntry OBJECT-TYPE
    SYNTAX          VtpVlanEditEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about one VLAN in the Edit Buffer for a
        particular management domain.
"
    INDEX           {
                        managementDomainIndex,
                        vtpVlanEditIndex
                    } 
    ::= { vtpVlanEditTable 1 }

VtpVlanEditEntry ::= SEQUENCE {
        vtpVlanEditIndex              VlanIndex,
        vtpVlanEditState              INTEGER,
        vtpVlanEditType               VlanType,
        vtpVlanEditName               DisplayString,
        vtpVlanEditMtu                Integer32,
        vtpVlanEditDot10Said          OCTET STRING,
        vtpVlanEditRingNumber         Integer32,
        vtpVlanEditBridgeNumber       Integer32,
        vtpVlanEditStpType            INTEGER,
        vtpVlanEditParentVlan         VlanIndex,
        vtpVlanEditRowStatus          RowStatus,
        vtpVlanEditTranslationalVlan1 VlanIndex,
        vtpVlanEditTranslationalVlan2 VlanIndex,
        vtpVlanEditBridgeType         INTEGER,
        vtpVlanEditAreHopCount        Integer32,
        vtpVlanEditSteHopCount        Integer32,
        vtpVlanEditIsCRFBackup        TruthValue,
        vtpVlanEditTypeExt            VlanTypeExt,
        vtpVlanEditTypeExt2           VlanTypeExt
}

vtpVlanEditIndex OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The VLAN-id which this VLAN would have on ISL or
        802.1q trunks.
" 
    ::= { vtpVlanEditEntry 1 }

vtpVlanEditState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        operational(1),
                        suspended(2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The state which this VLAN would have.
"
    DEFVAL          { operational } 
    ::= { vtpVlanEditEntry 2 }

vtpVlanEditType OBJECT-TYPE
    SYNTAX          VlanType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The type which this VLAN would have.
        An implementation may restrict access to this object.
"
    DEFVAL          { ethernet } 
    ::= { vtpVlanEditEntry 3 }

vtpVlanEditName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE  (1..32))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The name which this VLAN would have.  This name would be
        used as the ELAN-name for an ATM LAN-Emulation segment of
        this VLAN.

        An implementation may restrict access to this object.
" 
    ::= { vtpVlanEditEntry 4 }

vtpVlanEditMtu OBJECT-TYPE
    SYNTAX          Integer32 (1500..18190)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The MTU size which this VLAN would have, defined as the
        size of largest MAC-layer (information field portion of the)
        data frame which can be transmitted on the VLAN.

        An implementation may restrict access to this object.
"
    DEFVAL          { 1500 } 
    ::= { vtpVlanEditEntry 5 }

vtpVlanEditDot10Said OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (4))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The value of the 802.10 SAID field which would be used for
        this VLAN.

        An implementation may restrict access to this object.
" 
    ::= { vtpVlanEditEntry 6 }

vtpVlanEditRingNumber OBJECT-TYPE
    SYNTAX          Integer32 (0..4095)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The ring number which would be used for this VLAN.  This
        object is only instantiated when the value of the
        corresponding instance of vtpVlanEditType has a value of
        'fddi' or 'tokenRing' and Source Routing is in use on 
        this VLAN.
" 
    ::= { vtpVlanEditEntry 7 }

vtpVlanEditBridgeNumber OBJECT-TYPE
    SYNTAX          Integer32 (0..15)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The bridge number of the VTP-capable switches which would
        be used for this VLAN.  This object is only instantiated
        when the value of the corresponding instance of
        vtpVlanEditType has a value of fddiNet(4) or trNet(5).
" 
    ::= { vtpVlanEditEntry 8 }

vtpVlanEditStpType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ieee(1),
                        ibm(2),
                        auto(3)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The type of the Spanning Tree Protocol which would be
        running on this VLAN.  This object is only instantiated
        when the value of the corresponding instance of
        vtpVlanEditType has a value of fddiNet(4) or trNet(5).

        If 'ieee' is selected, the STP that runs will be IEEE.

        If 'ibm' is selected, the STP that runs will be IBM.

        If 'auto' is selected, the STP that runs will be
        dependant on the values of vtpVlanEditBridgeType for all
        children tokenRing/fddi type VLANs.  This will result in
        a 'hybrid' STP (see vtpVlanStpType).
" 
    ::= { vtpVlanEditEntry 9 }

vtpVlanEditParentVlan OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The VLAN index of the VLAN which would be the parent for
        this VLAN.  This object is only instantiated when the value
        of the corresponding instance of vtpVlanEditType has a value
        of 'fddi' or 'tokenRing' and Source Routing is in use on
        this VLAN.  The parent VLAN must have a vtpVlanEditType 
        value of fddiNet(4) or trNet(5), respectively.
" 
    ::= { vtpVlanEditEntry 10 }

vtpVlanEditRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The status of this row.  Any and all columnar objects in an
        existing row can be modified irrespective of the status of
        the row.

        A row is not qualified for activation until instances of at
        least its vtpVlanEditType, vtpVlanEditName and
        vtpVlanEditDot10Said columns have appropriate values.

        The management station should endeavor to make all rows
        consistent in the table before 'apply'ing the buffer.  An
        inconsistent entry in the table will cause the entire
        buffer to be rejected with the vtpVlanApplyStatus object
        set to the appropriate error value.
" 
    ::= { vtpVlanEditEntry 11 }

vtpVlanEditTranslationalVlan1 OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A VLAN to which this VLAN would be translational-bridged.
        If this value and the corresponding instance of
        vtpVlanTranslationalVlan2 are both zero, then this VLAN
        would not be translational-bridged.

        An implementation may restrict access to this object.
"
    DEFVAL          { 0 } 
    ::= { vtpVlanEditEntry 12 }

vtpVlanEditTranslationalVlan2 OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "Another VLAN, i.e., other than that indicated by
        vtpVlanEditTranslationalVlan1, to which this VLAN would be
        translational-bridged.  If this value and the corresponding
        instance of vtpVlanTranslationalVlan1 are both zero, then
        this VLAN would not be translational-bridged.

        An implementation may restrict access to this object.
"
    DEFVAL          { 0 } 
    ::= { vtpVlanEditEntry 13 }

vtpVlanEditBridgeType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        srt(1),
                        srb(2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The type of Source Route bridging mode which would be in
        use on this VLAN.  This object is only instantiated when 
        the value of  the corresponding instance of vtpVlanEditType
        has a value of fddi(2) or tokenRing(3) and Source Routing 
        is in use on this VLAN.
" 
    ::= { vtpVlanEditEntry 14 }

vtpVlanEditAreHopCount OBJECT-TYPE
    SYNTAX          Integer32 (1..13)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The maximum number of bridge hops allowed in
        All Routes Explorer frames on this VLAN.  This
        object is only instantiated when the value of the
        corresponding instance of vtpVlanType has a value of fddi(2)
        or tokenRing(3) and Source Routing is in use on this VLAN.
" 
    ::= { vtpVlanEditEntry 15 }

vtpVlanEditSteHopCount OBJECT-TYPE
    SYNTAX          Integer32 (1..13)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The maximum number of bridge hops allowed in
        Spanning Tree Explorer frames on this VLAN.  This
        object is only instantiated when the value of the
        corresponding instance of vtpVlanType has a value of fddi(2)
        or tokenRing(3) and Source Routing is in use on this VLAN.
" 
    ::= { vtpVlanEditEntry 16 }

vtpVlanEditIsCRFBackup OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "True if this VLAN is of type trCrf and also is acting as
        a backup trCrf for the ISL distributed BRF.  This object is
        only instantiated when the value of the corresponding
        instance of vtpVlanEditType has a value of tokenRing(3).
" 
    ::= { vtpVlanEditEntry 17 }

vtpVlanEditTypeExt OBJECT-TYPE
    SYNTAX          VlanTypeExt
    MAX-ACCESS      read-only
    STATUS          deprecated
   DESCRIPTION        "The additional type information of this VLAN.
"
    ::= { vtpVlanEditEntry 18 }

vtpVlanEditTypeExt2 OBJECT-TYPE
    SYNTAX          VlanTypeExt
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The additional type information of this VLAN.
        The VlanTypeExt TC specifies which bits may
        be written by a management application.
        The agent should provide a default value.
" 
    ::= { vtpVlanEditEntry 19 }
 

-- VTP Statistics

vtpStats  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 5 }


vtpStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "A table of VTP statistics.
"
    ::= { vtpStats 1 }

vtpStatsEntry OBJECT-TYPE
    SYNTAX          VtpStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "VTP statistics for one management domain.
"
    AUGMENTS           { managementDomainEntry  } 
    ::= { vtpStatsTable 1 }

VtpStatsEntry ::= SEQUENCE {
        vtpInSummaryAdverts      Counter32,
        vtpInSubsetAdverts       Counter32,
        vtpInAdvertRequests      Counter32,
        vtpOutSummaryAdverts     Counter32,
        vtpOutSubsetAdverts      Counter32,
        vtpOutAdvertRequests     Counter32,
        vtpConfigRevNumberErrors Counter32,
        vtpConfigDigestErrors    Counter32
}

vtpInSummaryAdverts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Summary Adverts received for this
        management domain.
" 
    ::= { vtpStatsEntry 1 }

vtpInSubsetAdverts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Subset Adverts received for this
        management domain.
" 
    ::= { vtpStatsEntry 2 }

vtpInAdvertRequests OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Advert Requests received for this
        management domain.
" 
    ::= { vtpStatsEntry 3 }

vtpOutSummaryAdverts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Summary Adverts sent for this
        management domain.
" 
    ::= { vtpStatsEntry 4 }

vtpOutSubsetAdverts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Subset Adverts sent for this
        management domain.
" 
    ::= { vtpStatsEntry 5 }

vtpOutAdvertRequests OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The total number of VTP Advert Requests sent for this
        management domain.
" 
    ::= { vtpStatsEntry 6 }

vtpConfigRevNumberErrors OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of occurrences of configuration revision number
        errors for this management domain.  A configuration revision
        number error occurs when a device receives a VTP
        advertisement for which:

        - the advertisement's Configuration Revision Number is the
          same as the current locally-held value, and

        - the advertisement's digest value is different from the
          current locally-held value.
" 
    ::= { vtpStatsEntry 7 }

vtpConfigDigestErrors OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of occurrences of configuration digest errors
        for this management domain.  A configuration digest error
        occurs when a device receives a VTP advertisement for which:

        - the advertisement's Configuration Revision Number is
          greater than the current locally-held value, and

        -  the advertisement's digest value computed by the
         receiving device does not match the checksum in the
         summary advertisement that was received earlier. This
         can happen, for example, if there is a mismatch in VTP
         passwords between the VTP devices.
" 
    ::= { vtpStatsEntry 8 }
 

-- Trunk Ports

vlanTrunkPorts  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 6 }


vlanTrunkPortTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VlanTrunkPortEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The table containing information on the local system's VLAN
        trunk ports.
"
    ::= { vlanTrunkPorts 1 }

vlanTrunkPortEntry OBJECT-TYPE
    SYNTAX          VlanTrunkPortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about one trunk port.
"
    INDEX           { vlanTrunkPortIfIndex } 
    ::= { vlanTrunkPortTable 1 }

VlanTrunkPortEntry ::= SEQUENCE {
        vlanTrunkPortIfIndex               InterfaceIndex,
        vlanTrunkPortManagementDomain      ManagementDomainIndex,
        vlanTrunkPortEncapsulationType     INTEGER,
        vlanTrunkPortVlansEnabled          OCTET STRING,
        vlanTrunkPortNativeVlan            VlanIndex,
        vlanTrunkPortRowStatus             RowStatus,
        vlanTrunkPortInJoins               Counter32,
        vlanTrunkPortOutJoins              Counter32,
        vlanTrunkPortOldAdverts            Counter32,
        vlanTrunkPortVlansPruningEligible  OCTET STRING,
        vlanTrunkPortVlansXmitJoined       OCTET STRING,
        vlanTrunkPortVlansRcvJoined        OCTET STRING,
        vlanTrunkPortDynamicState          INTEGER,
        vlanTrunkPortDynamicStatus         INTEGER,
        vlanTrunkPortVtpEnabled            TruthValue,
        vlanTrunkPortEncapsulationOperType INTEGER,
        vlanTrunkPortVlansEnabled2k        OCTET STRING,
        vlanTrunkPortVlansEnabled3k        OCTET STRING,
        vlanTrunkPortVlansEnabled4k        OCTET STRING,
        vtpVlansPruningEligible2k          OCTET STRING,
        vtpVlansPruningEligible3k          OCTET STRING,
        vtpVlansPruningEligible4k          OCTET STRING,
        vlanTrunkPortVlansXmitJoined2k     OCTET STRING,
        vlanTrunkPortVlansXmitJoined3k     OCTET STRING,
        vlanTrunkPortVlansXmitJoined4k     OCTET STRING,
        vlanTrunkPortVlansRcvJoined2k      OCTET STRING,
        vlanTrunkPortVlansRcvJoined3k      OCTET STRING,
        vlanTrunkPortVlansRcvJoined4k      OCTET STRING,
        vlanTrunkPortDot1qTunnel           INTEGER,
        vlanTrunkPortVlansActiveFirst2k    Cisco2KVlanList,
        vlanTrunkPortVlansActiveSecond2k   Cisco2KVlanList
}

vlanTrunkPortIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The value of ifIndex for the interface corresponding to
        this trunk port.
" 
    ::= { vlanTrunkPortEntry 1 }

vlanTrunkPortManagementDomain OBJECT-TYPE
    SYNTAX          ManagementDomainIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The value of managementDomainIndex for the management
        domain on this trunk port.  Devices which support only one
        management domain will support this object read-only.
" 
    ::= { vlanTrunkPortEntry 2 }

vlanTrunkPortEncapsulationType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        isl(1),
                        dot10(2),
                        lane(3),
                        dot1Q(4),
                        negotiate(5)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The type of VLAN encapsulation desired to be used on this
        trunk port. It is either a particular type, or 'negotiate'
        meaning whatever type results from the negotiation.
        negotiate(5) is not allowed if the port does not support
        negotiation or if its vlanTrunkPortDynamicState is set to
        on(1) or onNoNegotiate(5). Whether writing to this object
        in order to modify the encapsulation is supported is both
        device and interface specific.
" 
    ::= { vlanTrunkPortEntry 3 }

vlanTrunkPortVlansEnabled OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN in the
        management domain on this trunk port.  The first octet
        corresponds to VLANs with VlanIndex values of 0 through 7;
        the second octet to VLANs 8 through 15; etc.  The most
        significant bit of each octet corresponds to the lowest
        value VlanIndex in that octet.  If the bit corresponding to
        a VLAN is set to '1', then the local system is enabled for
        sending and receiving frames on that VLAN; if the bit is set
        to '0', then the system is disabled from sending and
        receiving frames on that VLAN.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 4 }

vlanTrunkPortNativeVlan OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The VlanIndex of the VLAN which is represented by native
        frames on this trunk port.  For trunk ports not supporting
        the sending and receiving of native frames, this value
        should be set to zero.
" 
    ::= { vlanTrunkPortEntry 5 }

vlanTrunkPortRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "The status of this row.  In some circumstances, the
        creation of a row in this table is needed to enable the
        appropriate trunking/tagging protocol on the port, to enable
        the use of VTP on the port, and to assign the port to the
        appropriate management domain.  In other circumstances, rows
        in this table will be created as a by-product of other
        operations.
" 
    ::= { vlanTrunkPortEntry 6 }

vlanTrunkPortInJoins OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of VTP Join messages received on this trunk
        port.
" 
    ::= { vlanTrunkPortEntry 7 }

vlanTrunkPortOutJoins OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The number of VTP Join messages sent on this trunk port.
"
    ::= { vlanTrunkPortEntry 8 }

vlanTrunkPortOldAdverts OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The number of VTP Advertisement messages which indicated
        the sender does not support VLAN-pruning received on this
        trunk port.
" 
    ::= { vlanTrunkPortEntry 9 }

vlanTrunkPortVlansPruningEligible OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN in the
        management domain on this trunk port.  The first octet
        corresponds to VLANs with VlanIndex values of 0 through 7;
        the second octet to VLANs 8 through 15; etc.  The most
        significant bit of each octet corresponds to the lowest
        value VlanIndex in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local system is permitted to prune that VLAN on this trunk
        port; if the bit is set to '0', then the system must not
        prune that VLAN on this trunk port.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 10 }

vlanTrunkPortVlansXmitJoined OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN in the
        management domain on this trunk port.  The first octet
        corresponds to VLANs with VlanIndex values of 0 through 7;
        the second octet to VLANs 8 through 15; etc.  The most
        significant bit of each octet corresponds to the lowest
        value VlanIndex in that octet.

        If the bit corresponding to a VLAN is set to '1', then this
        VLAN is presently being forwarded on this trunk port, i.e.,
        it is not pruned; if the bit is set to '0', then this VLAN
        is presently not being forwarded on this trunk port, either
        because it is pruned or for some other reason.
" 
    ::= { vlanTrunkPortEntry 11 }

vlanTrunkPortVlansRcvJoined OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN in the
        management domain on this trunk port.  The first octet
        corresponds to VLANs with VlanIndex values of 0 through 7;
        the second octet to VLANs 8 through 15; etc.  The most
        significant bit of each octet corresponds to the lowest
        value VlanIndex in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local switch is currently sending joins for this VLAN on
        this trunk port, i.e., it is asking to receive frames for
        this VLAN; if the bit is set to '0', then the local switch
        is not currently sending joins for this VLAN on this trunk
        port.
" 
    ::= { vlanTrunkPortEntry 12 }

vlanTrunkPortDynamicState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        on(1),
                        off(2),
                        desirable(3),
                        auto(4),
                        onNoNegotiate(5)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "For devices that allows dynamic determination of whether
        a link between two switches should be a trunk or not, this
        object allows the operator to mandate the behavior of that
        dynamic mechanism.

        on(1) dictates that the interface will always be a
        trunk. This is the value for static entries (those that
        show no dynamic behavior). If the negotiation is supported
        on this port, negotiation will take place with the far end
        to attempt to bring the far end into trunking state.

        off(2) allows an operator to specify that the specified
        interface is never to be trunk, regardless of any dynamic
        mechanisms to the contrary.  This value is useful for
        overriding the default behavior of some switches. If the
        negotiation is supported on this port, negotiation will take
        place with the far end to attempt on the link to bring the
        far end into non-trunking state.

        desirable(3) is used to indicate that it is desirable for
        the interface to become a trunk.  The device will initiate
        any negotiation necessary to become a trunk but will not
        become a trunk unless it receives confirmation from the far
        end on the link.

        auto(4) is used to indicate that the interface is capable
        and willing to become a trunk but will not initiate
        trunking negotiations.  The far end on the link are
        required to either start negotiations or start sending
        encapsulated packets, on which event the specified
        interface will become a trunk.

        onNoNegotiate(5) is used to indicate that the interface is
        permanently set to be a trunk, and no negotiation takes
        place with the far end on the link to ensure consistent
        operation. This is similar to on(1) except no negotiation
        takes place with the far end.

        If the port does not support negotiation or its
        vlanTrunkPortEncapsulationType is set to negotiate(5),
        onNoNegotiate(5) is not allowed.

        Devices that do no support dynamic determination (for just
        a particular interface, encapsulation or for the whole
        device) need only support the 'on', and 'off' values.
" 
    ::= { vlanTrunkPortEntry 13 }

vlanTrunkPortDynamicStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        trunking(1),
                        notTrunking(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Indicates whether the specified interface is either
        acting as a trunk or not. This is a result of the
        vlanTrunkPortDynamicState and the ifOperStatus of the
        trunk port itself.
" 
    ::= { vlanTrunkPortEntry 14 }

vlanTrunkPortVtpEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "Some trunk interface modules allow VTP to be
        enabled/disabled seperately from that of the central
        device.  In such a case this object provides management a
        way to remotely enable VTP on that module.  If a module
        does not support a seperate VTP enabled state then this
        object shall always return 'true' and will accept no other
        value during a SET operation.
" 
    ::= { vlanTrunkPortEntry 15 }

vlanTrunkPortEncapsulationOperType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        isl(1),
                        dot10(2),
                        lane(3),
                        dot1Q(4),
                        negotiating(5),
                        notApplicable(6)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The type of VLAN encapsulation in use on this trunk port.
        For intefaces with vlanTrunkPortDynamicStatus of
        notTrunking(2) the vlanTrunkPortEncapsulationOperType shall
        be notApplicable(6).
" 
    ::= { vlanTrunkPortEntry 16 }

vlanTrunkPortVlansEnabled2k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 1024 through 2047 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 1024 through 1031; the second
        octet to VLANs 1032 through 1039; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet. If the bit corresponding to a VLAN is set to
        '1', then the local system is enabled for sending and
        receiving frames on that VLAN; if the bit is set to '0',
        then the system is disabled from sending and receiving
        frames on that VLAN. The default value is zero length
        string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 17 }

vlanTrunkPortVlansEnabled3k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 2048 through 3071 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 2048 through 2055; the second
        octet to VLANs 2056 through 2063; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet. If the bit corresponding to a VLAN is set to
        '1', then the local system is enabled for sending and
        receiving frames on that VLAN; if the bit is set to '0',
        then the system is disabled from sending and receiving
        frames on that VLAN. The default value is zero length
        string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 18 }

vlanTrunkPortVlansEnabled4k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 3072 through 4095 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 3072 through 3079; the second
        octet to VLANs 3080 through 3087; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet. If the bit corresponding to a VLAN is set to
        '1', then the local system is enabled for sending and
        receiving frames on that VLAN; if the bit is set to '0',
        then the system is disabled from sending and receiving
        frames on that VLAN. The default value is zero length
        string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 19 }

vtpVlansPruningEligible2k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 1024 through 2047 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 1024 through 1031; the second
        octet to VLANs 1032 through 1039; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local system is permitted to prune that VLAN on this trunk
        port; if the bit is set to '0', then the system must not
        prune that VLAN on this trunk port.
        The default value is zero length string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 20 }

vtpVlansPruningEligible3k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 2048 through 3071 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 2048 through 2055; the second
        octet to VLANs 2056 through 2063; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local system is permitted to prune that VLAN on this trunk
        port; if the bit is set to '0', then the system must not
        prune that VLAN on this trunk port.
        The default value is zero length string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 21 }

vtpVlansPruningEligible4k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 3072 through 4095 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 3072 through 3079; the second
        octet to VLANs 3080 through 3087; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local system is permitted to prune that VLAN on this trunk
        port; if the bit is set to '0', then the system must not
        prune that VLAN on this trunk port.
        The default value is zero length string.

        To avoid conflicts between overlapping partial updates by
        multiple managers, i.e., updates which modify only a portion
        of an instance of this object (e.g., enable/disable a single
        VLAN on the trunk port), any SNMP Set operation accessing an
        instance of this object should also write the value of
        vlanTrunkPortSetSerialNo.
" 
    ::= { vlanTrunkPortEntry 22 }

vlanTrunkPortVlansXmitJoined2k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 1024 through 2047 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 1024 through 1031; the second
        octet to VLANs 1032 through 1039; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then this
        VLAN is presently being forwarded on this trunk port, i.e.,
        it is not pruned; if the bit is set to '0', then this VLAN
        is presently not being forwarded on this trunk port, either
        because it is pruned or for some other reason.
" 
    ::= { vlanTrunkPortEntry 23 }

vlanTrunkPortVlansXmitJoined3k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 2048 through 3071 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 2048 through 2055; the second
        octet to VLANs 2056 through 2063; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then this
        VLAN is presently being forwarded on this trunk port, i.e.,
        it is not pruned; if the bit is set to '0', then this VLAN
        is presently not being forwarded on this trunk port, either
        because it is pruned or for some other reason.
" 
    ::= { vlanTrunkPortEntry 24 }

vlanTrunkPortVlansXmitJoined4k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 3072 through 4095 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 3072 through 3079; the second
        octet to VLANs 3080 through 3087; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then this
        VLAN is presently being forwarded on this trunk port, i.e.,
        it is not pruned; if the bit is set to '0', then this VLAN
        is presently not being forwarded on this trunk port, either
        because it is pruned or for some other reason.
" 
    ::= { vlanTrunkPortEntry 25 }

vlanTrunkPortVlansRcvJoined2k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 1024 through 2047 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 1024 through 1031; the second
        octet to VLANs 1032 through 1039; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local switch is currently sending joins for this VLAN on
        this trunk port, i.e., it is asking to receive frames for
        this VLAN; if the bit is set to '0', then the local switch
        is not currently sending joins for this VLAN on this trunk
        port.
" 
    ::= { vlanTrunkPortEntry 26 }

vlanTrunkPortVlansRcvJoined3k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 2048 through 3071 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 2048 through 2055; the second
        octet to VLANs 2056 through 2063; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local switch is currently sending joins for this VLAN on
        this trunk port, i.e., it is asking to receive frames for
        this VLAN; if the bit is set to '0', then the local switch
        is not currently sending joins for this VLAN on this trunk
        port.
" 
    ::= { vlanTrunkPortEntry 27 }

vlanTrunkPortVlansRcvJoined4k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN for VLANS
        with VlanIndex values of 3072 through 4095 in the management
        domain on this trunk port.  The first octet corresponds to
        VLANs with VlanIndex values of 3072 through 3079; the second
        octet to VLANs 3080 through 3087; etc.  The most significant
        bit of each octet corresponds to the lowest value VlanIndex
        in that octet.

        If the bit corresponding to a VLAN is set to '1', then the
        local switch is currently sending joins for this VLAN on
        this trunk port, i.e., it is asking to receive frames for
        this VLAN; if the bit is set to '0', then the local switch
        is not currently sending joins for this VLAN on this trunk
        port.
" 
    ::= { vlanTrunkPortEntry 28 }

vlanTrunkPortDot1qTunnel OBJECT-TYPE
    SYNTAX          INTEGER  {
                        trunk(1),
                        access(2),
                        disabled(3)
                    }
    MAX-ACCESS      read-create
    STATUS          deprecated
    DESCRIPTION        "Indicates dot1qtunnel mode of the port.

        If the portDot1qTunnel  is set to 'trunk' mode, the port's
        vlanTrunkPortDynamicState will be changed to 'onNoNegotiate'
        and the vlanTrunkPortEncapsulationType will be set to
        'dot1Q'. These values cannot be changed unless dot1q tunnel
        is disabled on this port.

        If the portDot1qTunnel mode is set to 'access' mode, the
        port's vlanTrunkPortDynamicState will be set to 'off'.And
        the value of vlanTrunkPortDynamicState cannot be changed
        unless dot1q tunnel is disabled on this port. 1Q packets
        received on this access port will remain.

        Setting the port to dot1q tunnel 'disabled' mode causes the
        dot1q tunnel feature to be disabled on this port.  This
        object can't be set to 'trunk' or 'access' mode, when
        vlanTrunkPortsDot1qTag  object is set to 'false'.

        This object has been deprecated and is replaced by the
        object 'cltcDot1qTunnelMode' in the
        CISCO-L2-TUNNEL-CONFIG-MIB
"
    DEFVAL          { disabled } 
    ::= { vlanTrunkPortEntry 29 }

vlanTrunkPortVlansActiveFirst2k OBJECT-TYPE
    SYNTAX          Cisco2KVlanList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN
        with VlanIndex values of 0 through 2047.

        If the bit corresponding to a VLAN is set to 1,
        it indicates that vlan is allowed and active in
        management domain.

        If the bit corresponding to a VLAN is set to 0,
        it indicates that vlan is not allowed or not active
        in management domain.
" 
    ::= { vlanTrunkPortEntry 30 }

vlanTrunkPortVlansActiveSecond2k OBJECT-TYPE
    SYNTAX          Cisco2KVlanList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A string of octets containing one bit per VLAN
        with VlanIndex values of 2048 through 4095.

        If the bit corresponding to a VLAN is set to 1,
        it indicates that vlan is allowed and active in
        management domain.

        If the bit corresponding to a VLAN is set to 0,
        it indicates that vlan is not allowed or not active
        in management domain.
" 
    ::= { vlanTrunkPortEntry 31 }
 


vlanTrunkPortSetSerialNo OBJECT-TYPE
    SYNTAX          TestAndIncr
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "An advisory lock used to allow several cooperating SNMPv2
        managers to coordinate their use of the SNMPv2 set operation
        acting upon any instance of vlanTrunkPortVlansEnabled.
" 
    ::= { vlanTrunkPorts 2 }

vlanTrunkPortsDot1qTag OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          deprecated
    DESCRIPTION        "An indication of whether the tagging on all VLANs including
        native VLAN for all 802.1q trunks is enabled.

        If this object has a value of true(1) then all VLANs
        including native VLAN are tagged.  If the value is false(2)
        then all VLANs excluding native VLAN are tagged.

        This object has been deprecated and is replaced by the
        object 'cltcDot1qAllTaggedEnabled' in the
        CISCO-L2-TUNNEL-CONFIG-MIB
"
    DEFVAL          { false } 
    ::= { vlanTrunkPorts 3 }
vtpDiscover  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 7 }


vtpDiscoverTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpDiscoverEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table contains information related to the discovery
        of the VTP members in the designated management
        domain. This table is not instantiated when 
        managementDomainVersionInUse is version1(1), version2(3)
        or none(3).
"
    ::= { vtpDiscover 1 }

vtpDiscoverEntry OBJECT-TYPE
    SYNTAX          VtpDiscoverEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information related to the discovery of the
        VTP members in one management domain.
"
    INDEX           { managementDomainIndex } 
    ::= { vtpDiscoverTable 1 }

VtpDiscoverEntry ::= SEQUENCE {
        vtpDiscoverAction   INTEGER,
        vtpDiscoverStatus   INTEGER,
        vtpLastDiscoverTime TimeStamp
}

vtpDiscoverAction OBJECT-TYPE
    SYNTAX          INTEGER  {
                        discover(1),
                        noOperation(2),
                        purgeResult(3)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "When this object is set to discover(1), all the
        entries in vtpDiscoverResultTable for the
        corresponding management domain will be removed 
        and the local device will begin to discover all
        VTP members in the management domain. Upon the
        successful completion of discovery, the discovered
        result will be stored in the vtpDiscoverResultTable.

        If vtpDiscoverStatus is inProgress(1), setting 
        vtpDiscoverAction to discover(1) will fail. 

        When this object is set to purgeResult(3), 
        all the entries of vtpDiscoverResultTable for 
        the corresponding management domain will be
        removed from vtpDiscoverResultTable.

        When this object is set to noOperation(2), no
        action will be taken. When read, this object
        always returns noOperation(2).
" 
    ::= { vtpDiscoverEntry 1 }

vtpDiscoverStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        inProgress(1),
                        succeeded(2),
                        resourceUnavailable(3),
                        someOtherError(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The current status of VTP discovery.

        inProgress - a discovery is in progress;

        succeeded - the discovery was completed successfully
                    (this value is also used when 
                    no discover has been invoked since the
                    last time the local system restarted);

        resourceUnavailable - the discovery failed because
                    the required allocation of a resource is
                    presently unavailable.

        someOtherError - 'the discovery failed due to a
                    reason no listed.
" 
    ::= { vtpDiscoverEntry 2 }

vtpLastDiscoverTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The value of sysUpTime at which the last discovery
        was completed.

        A value of zero indicates that no discovery has been
        invoked since last time the local system restarted.
" 
    ::= { vtpDiscoverEntry 3 }
 


vtpDiscoverResultTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpDiscoverResultEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The table containing information of discovered VTP members
        in the management domain in which the local system is
        participating. This table is not instantiated when 
        managementDomainVersionInUse is version1(1), version2(2) or
        none(3).
"
    ::= { vtpDiscover 2 }

vtpDiscoverResultEntry OBJECT-TYPE
    SYNTAX          VtpDiscoverResultEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "A conceptual row is created for each VTP member which
        is found through successful discovery.
"
    INDEX           {
                        managementDomainIndex,
                        vtpDiscoverResultIndex
                    } 
    ::= { vtpDiscoverResultTable 1 }

VtpDiscoverResultEntry ::= SEQUENCE {
        vtpDiscoverResultIndex         Unsigned32,
        vtpDiscoverResultDatabaseName  SnmpAdminString,
        vtpDiscoverResultConflicting   TruthValue,
        vtpDiscoverResultDeviceId      SnmpAdminString,
        vtpDiscoverResultPrimaryServer SnmpAdminString,
        vtpDiscoverResultRevNumber     Gauge32,
        vtpDiscoverResultSystemName    SnmpAdminString
}

vtpDiscoverResultIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "A value assigned by the system which identifies
        a VTP member and the associated database in the 
        management domain.
" 
    ::= { vtpDiscoverResultEntry 1 }

vtpDiscoverResultDatabaseName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The database name associated with the
        discovered VTP member.
" 
    ::= { vtpDiscoverResultEntry 2 }

vtpDiscoverResultConflicting OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "Indicates whether this VTP member contains
        conflicting information.

        true(1) indicates that this member has conflicting 
        information of the database type in the management domain.

        false(2) indicates that there is no conflicting information
        of the database type in the management domain.
" 
    ::= { vtpDiscoverResultEntry 3 }

vtpDiscoverResultDeviceId OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The unique identifier of the device for this VTP member.
"
    ::= { vtpDiscoverResultEntry 4 }

vtpDiscoverResultPrimaryServer OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The unique identifier of the primary server for this VTP
        member and the associated database type.

        There are two different VTP servers, the primary server
        and the secondary server.  When a local device is
        configured as a server for a certain database type,
        it becomes secondary server by default. 
        Primary server is an operational role under which a
        server can initiate or change the VTP configuration of the
        database type.

        If this VTP member itself is the primary server, the   
        value of this object is the same as the value of 
        vtpDiscoverResultDeviceId of the instance.
" 
    ::= { vtpDiscoverResultEntry 5 }

vtpDiscoverResultRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The current configuration revision number as known by the
        VTP member. When the database type is unknown for
        the VTP member, this value is 0.
" 
    ::= { vtpDiscoverResultEntry 6 }

vtpDiscoverResultSystemName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "sysName of the VTP member.
"
    ::= { vtpDiscoverResultEntry 7 }
 

vtpDatabase  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 8 }


vtpDatabaseTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpDatabaseEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "This table contains information of the VTP
        databases. It is not instantiated when
        managementDomainVersionInUse is version1(1), 
        version2(3) or none(3).
"
    ::= { vtpDatabase 1 }

vtpDatabaseEntry OBJECT-TYPE
    SYNTAX          VtpDatabaseEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about the status of the VTP database
        in the domain.  Each VTP database type known to the
        local device type has an entry in this table.
        An entry is also created for unknown database which is
        notified through VTP advertisements from other VTP
        servers.
"
    INDEX           {
                        managementDomainIndex,
                        vtpDatabaseIndex
                    } 
    ::= { vtpDatabaseTable 1 }

VtpDatabaseEntry ::= SEQUENCE {
        vtpDatabaseIndex            Unsigned32,
        vtpDatabaseName             SnmpAdminString,
        vtpDatabaseLocalMode        INTEGER,
        vtpDatabaseRevNumber        Gauge32,
        vtpDatabasePrimaryServer    TruthValue,
        vtpDatabasePrimaryServerId  SnmpAdminString,
        vtpDatabaseTakeOverPrimary  TruthValue,
        vtpDatabaseTakeOverPassword SnmpAdminString
}

vtpDatabaseIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "A value assigned by the system which uniquely identifies
        a VTP database in the local system.
" 
    ::= { vtpDatabaseEntry 1 }

vtpDatabaseName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
   DESCRIPTION        "The name of the database.
"
    ::= { vtpDatabaseEntry 2 }

vtpDatabaseLocalMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3),
                        off(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "The local VTP mode for a particular database type
        in this administrative domain.

        - 'client' indicates that the local system is acting
          as a VTP client of the database type.

        - 'server' indicates that the local system is acting
          as a VTP server of the database type.

        - 'transparent' indicates that the local system does
          not generate or listen to VTP messages of this 
          database type, but forwards
          messages. This mode can also be set by the device
          itself when the size of database is too large for it
          to hold in DRAM.

        - 'off' indicates that the local system does not
          generate, listen to or forward any VTP messages
          of this database type.

        The default mode is 'client' for the database type 
        known to the local device and 'transparent' for the
        unknown database type.
" 
    ::= { vtpDatabaseEntry 3 }

vtpDatabaseRevNumber OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The current configuration revision number as known by the
        local device for this VTP 3 database type in the management
        domain.  This value is updated (if necessary) whenever a 
        VTP advertisement for the database type is received 
        or generated. When the database type is unknown to the 
        local device or no VTP advertisement for the database
        type is received or generated, its value is 0.
" 
    ::= { vtpDatabaseEntry 4 }

vtpDatabasePrimaryServer OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "There are two kinds of VTP version 3 servers for a certain
        database type - the primary server and the secondary server.
        When a local device is configured as a server for a certain
        database type, it becomes secondary server by default.
        Primary server is an operational role under which a
        server can initiate or change the VTP configuration of the
        database type.

        A true(1) value indicates that the local device is the 
        primary server of the database type in the management
        domain. A false(2) value indicates that the local device
        is not the primary server, or the database type is unknown
        to the local device.
" 
    ::= { vtpDatabaseEntry 5 }

vtpDatabasePrimaryServerId OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "The unique identifier of the primary server in the
        management domain for the database type. 

        If no primary server is discovered for the database
        type, the object has a value of zero length string.
" 
    ::= { vtpDatabaseEntry 6 }

vtpDatabaseTakeOverPrimary OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "There are two kinds of VTP version 3 servers for a certain
        database type - the primary server and the secondary server.
        When a local device is configured as a server for a certain
        database type, it becomes secondary server by default.
        Primary server is an operational role under which a
        server can initiate or change the VTP configuration of the
        database type.

        Setting this object to a true(1) value will advertise the
        configuration of this database type to the whole domain.

        In order to successfully setting this object to true(1),
        the value of vtpDatabaseLocalMode must be server(2). Besides
        that, when the VTP password is hidden from the configuration
        file, the password (vtpDatabaseTakeOverPassword) which 
        matches  the secret key (vtpAuthSecretKey) must be provided
        in the same data packet. 

        When read, the object always returns false(2).
" 
    ::= { vtpDatabaseEntry 7 }

vtpDatabaseTakeOverPassword OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "When read, this object always returns the value of a
        zero-length octet string.

        In the case that the VTP password is hidden from the 
        configuration and the local device intends
        to take over the whole domain, this object must be 
        set to the matching password with the secret key 
        (vtpAuthSecretKey) in the same data packet as which 
        the vtpDatabaseTakeOverPrimary is in. In all the 
        other situations, setting a valid value to this object 
        has no impact on the system.
" 
    ::= { vtpDatabaseEntry 8 }
 

vtpAuthentication  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 9 }


vtpAuthenticationTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VtpAuthEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "The table contains the authentication information of VTP
        in which the local system participates.

        The security mechanism of VTP relies on a secret key
        that is used to alter the MD5 digest of the packets
        transmitted on the wire.  The secret value is
        created from a password that may be saved in plain text
        in the configuration or hidden from the configuration.

        The device creating or modifying the VTP configuration
        signs it using the MD5 digest generated from the secret
        key before advertising it. Other devices in the domain
        receive this configuration use the same secret key
        to accept it if correctly signed or drop it otherwise.

        The user has the option to hide the password from the
        configuration. Once the password is hidden, the secret
        key generated from the password is shown in the 
        configuration instead, and there is no other way to 
        show the password in plain text again but clearing 
        it or resetting it. 

        In an un-trusted area, the password on a device can 
        be configured without being unveiled. After that,
        it has to be provided again by setting the same 
        value to vtpDatabaseTakeOverPassword if the user 
        wants to take over the whole VTP management domain
        of the database type.

        When managementDomainVersionInUse is version3(4), the 
        authentication mechanism is common to all VTP
        database type.
"
    ::= { vtpAuthentication 1 }

vtpAuthEntry OBJECT-TYPE
    SYNTAX          VtpAuthEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION        "Information about the status of the VTP
        authentication information in one domain.
"
    INDEX           { managementDomainIndex } 
    ::= { vtpAuthenticationTable 1 }

VtpAuthEntry ::= SEQUENCE {
        vtpAuthPassword     SnmpAdminString,
        vtpAuthPasswordType INTEGER,
        vtpAuthSecretKey    OCTET STRING
}

vtpAuthPassword OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "By default, this object has a value of a zero-length
        character string and is considered to be not
        configured.

        The device uses the password to generate the 
        secret key. It can be stored in the configuration in 
        plain text or hidden from the configuration. If a VTP 
        server intends to modify the database's configuration
        in the domain but the password was hidden from the
        configuration, the same password
        (vtpDatabaseTakeOverPassword) as the hidden one
        has to be provided.

        When this object is set alone, vtpAuthPasswordType is
        set to plaintext(1) automatically by the system.
        Setting this object to a zero length character string
        resets the password to its default value and the
        password is considered as not configured.

        This object is not allowed to be set at the same time
        when  vtpAuthSecretKey is set.

        When the vtpAuthPasswordType is hidden(2), this object 
        will return a zero-length character string when read.
" 
    ::= { vtpAuthEntry 1 }

vtpAuthPasswordType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        plaintext(1),
                        hidden(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "By default this object has the value as plaintext(1)
        and the VTP password is stored in the configuration
        file in plain text.

        Setting this object to hidden(2) will hide the
        password from the configuration.

        Once this object is set to hidden(2), it cannot
        be set to plaintext(1) alone. However, it may
        be set to plaintext(1) at the same time the
        password is set.
" 
    ::= { vtpAuthEntry 2 }

vtpAuthSecretKey OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0 | 16))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION        "The device creating or modifying the VTP configuration
        signs it using the MD5 digest generated from the secret
        key before advertising it. Other devices in the domain
        receiving this configuration use the same secret key
        to accept it if it was correctly signed or drop it 
        otherwise.

        By default, the object has the value as a zero-length
        string and this value is read only. It is set 
        to this value automatically when the password 
        (vtpAuthPassword) is set to a zero-length octet string.

        The secret key can be either generated using
        the password or configured by the user. Once
        the secret key is configured by the user, it is
        stored as a hexadecimal string in the device's
        configuration and the password is considered to be
        the secret key's matching password and hidden
        from the configuration automatically.

        This object is not allowed to be set at the same
        time when vtpAuthPassword is set.

        The secret key is overwritten by a newly generated
        secret key when the password is re-configured.
" 
    ::= { vtpAuthEntry 3 }
 

vlanStatistics  OBJECT IDENTIFIER
    ::= { vtpMIBObjects 10 }


vlanStatsVlans OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the number of the existing
        manageable VLANs with VLAN indices from 1 to
        1024 in the system.
" 
    ::= { vlanStatistics 1 }

vlanStatsExtendedVlans OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the number of the
        existing manageable VLANs with VLAN indices
        greater than 1024 in the system.
" 
    ::= { vlanStatistics 2 }

vlanStatsInternalVlans OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the number of the
        internal VLANs existing in the system.
" 
    ::= { vlanStatistics 3 }

vlanStatsFreeVlans OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION        "This object indicates the number of the
        free or unused VLANs in the system.
" 
    ::= { vlanStatistics 4 }
-- VTP notifications

vtpNotifications  OBJECT IDENTIFIER
    ::= { ciscoVtpMIB 2 }

vtpNotificationsPrefix  OBJECT IDENTIFIER
    ::= { vtpNotifications 0 }

vtpNotificationsObjects  OBJECT IDENTIFIER
    ::= { vtpNotifications 1 }


vtpConfigRevNumberError NOTIFICATION-TYPE
    OBJECTS         { managementDomainConfigRevNumber }
    STATUS          current
    DESCRIPTION        "A configuration revision number error notification
        signifies that a device has incremented its
        vtpConfigRevNumberErrors counter.

        Generation of this notification is suppressed if the
        vtpNotificationsEnabled has the value 'false'.

        The device must throttle the generation of consecutive
        vtpConfigRevNumberError notifications so that there is at
        least a five-second gap between notification of this type.
        When notification are throttled, they are dropped, not
        queued for sending at a future time.  (Note that
        'generating' a notification means sending to all configured
        recipients.)
"
   ::= { vtpNotificationsPrefix 1 }

vtpConfigDigestError NOTIFICATION-TYPE
    OBJECTS         { managementDomainConfigRevNumber }
    STATUS          current
    DESCRIPTION        "A configuration digest error notification signifies that a
        device has incremented its vtpConfigDigestErrors counter.

        Generation of this notification is suppressed if the
        vtpNotificationsEnabled has the value 'false'.

        The device must throttle the generation of consecutive
        vtpConfigDigestError notifications so that there is at least
        a five-second gap between notification of this type.  When
        notification are throttled, they are dropped, not queued for
        sending at a future time.  (Note that 'generating' a
        notification means sending to all configured recipients.)
"
   ::= { vtpNotificationsPrefix 2 }

vtpServerDisabled NOTIFICATION-TYPE
    OBJECTS         {
                        managementDomainConfigRevNumber,
                        vtpMaxVlanStorage
                    }
    STATUS          current
    DESCRIPTION        "A VTP Server disabled notification is generated when the
        local system is no longer able to function as a VTP Server
        because the number of defined VLANs is greater than
        vtpMaxVlanStorage or the local system is not able to
        recover complete VTP information after a reboot.

        Generation of this notification is suppressed if the
        vtpNotificationsEnabled has the value 'false'.
"
   ::= { vtpNotificationsPrefix 3 }

vtpMtuTooBig NOTIFICATION-TYPE
    OBJECTS         {
                        vlanTrunkPortManagementDomain,
                        vtpVlanState
                    }
    STATUS          current
    DESCRIPTION        "A VTP MTU tooBig notification is generated when a VLAN's
        MTU size is larger than can be supported either:

        - by one or more of its trunk ports:
          the included vtpVlanState has the value
          'mtuTooBigForTrunk' and the included
          vlanTrunkPortManagementDomain is for the first (or only)
          trunk port,
          or

        - by the device itself:
          vtpVlanState has the value 'mtuTooBigForDevice' and any
          instance of vlanTrunkPortManagementDomain is included.

        Devices which have no trunk ports do not send vtpMtuTooBig
        notifications.

        Generation of this notification is suppressed if the
        vtpNotificationsEnabled has the value 'false'.
"
   ::= { vtpNotificationsPrefix 4 }

vtpVersionOneDeviceDetected NOTIFICATION-TYPE
    OBJECTS         { vlanTrunkPortManagementDomain }
    STATUS          current
    DESCRIPTION        "A VTP version one device detected notification is
        generated by a device when:

        a) a management domain has been put into version 2 mode
           (as accessed by managementDomainVersionInUse).
        b) 15 minutes has passed since a).
        c) a version 1 PDU is detected on a trunk on the device
           that is in that management domain which has a lower
           revision number than the current configuration.
"
   ::= { vtpNotificationsPrefix 6 }

vlanTrunkPortDynamicStatusChange NOTIFICATION-TYPE
    OBJECTS         { vlanTrunkPortDynamicStatus }
    STATUS          current
    DESCRIPTION        "A vlanTrunkPortDynamicStatusChange notification is
        generated by a device when the value of
        vlanTrunkPortDynamicStatus object has been changed.
"
   ::= { vtpNotificationsPrefix 7 }

vtpLocalModeChanged NOTIFICATION-TYPE
    OBJECTS         { managementDomainLocalMode }
    STATUS          current
    DESCRIPTION        "A vtpLocalModeChanged notification is generated
        by a device when the value of the object 
        managementDomainLocalMode is changed.
"
   ::= { vtpNotificationsPrefix 8 }

vtpVersionInUseChanged NOTIFICATION-TYPE
    OBJECTS         { managementDomainVersionInUse }
    STATUS          current
    DESCRIPTION        "A vtpVersionInUseChanged notification is
        generated by a device when the value of the  
        object managementDomainVersionInUse is 
        changed.
"
   ::= { vtpNotificationsPrefix 9 }

vtpVlanCreated NOTIFICATION-TYPE
    OBJECTS         { vtpVlanName }
    STATUS          current
    DESCRIPTION        "A vtpVlanCreated notification is generated by a
        device when a VLAN is created.
"
   ::= { vtpNotificationsPrefix 10 }

vtpVlanDeleted NOTIFICATION-TYPE
    OBJECTS         { vtpVlanName }
    STATUS          current
    DESCRIPTION        "A vtpVlanDeleted notification is generated by a
        device when a VLAN is deleted.
"
   ::= { vtpNotificationsPrefix 11 }

vtpVlanRingNumberConflict NOTIFICATION-TYPE
    OBJECTS         {
                        vtpVlanRingNumber,
                        ifIndex,
                        vtpVlanPortLocalSegment
                    }
    STATUS          current
    DESCRIPTION        "A VTP ring number configuration conflict notification is
        generated if, and only at the time when, a device learns of
        a conflict between:

        a) the ring number (vtpVlanPortLocalSegment) being used on a
           token ring segment attached to the port identified by
           ifIndex, and

        b) the VTP-obtained ring number (vtpVlanRingNumber) for the
           VLAN identified by vtpVlanIndex.

        When such a conflict occurs, the bridge port is put into an
        administrative down position until the conflict is resolved
        through local/network management intervention.

        This notification is only applicable to VLANs of type
        'tokenRing'.
"
   ::= { vtpNotificationsPrefix 12 }

vtpPruningStateOperChange NOTIFICATION-TYPE
    OBJECTS         { managementDomainPruningStateOper }
    STATUS          current
    DESCRIPTION        "A vtpPruningStateOperChange notification is generated
        by the device when the instance value of
        managementDomainPruningStateOper is changed.
"
   ::= { vtpNotificationsPrefix 13 }

vtpVlanPortLocalSegment OBJECT-TYPE
    SYNTAX          Integer32 (0..65535)
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION        "The ring (segment) number in use on a 802.5 ring.  For
        bridges supporting RFC 1525, this value is the same as given
        by dot1dSrPortLocalSegment for the bridge port attached to
        that ring.  When tokenRing VLANs are in use, each 'trNet'
        VLAN can/does have a different instance of
        dot1dSrPortLocalSegment for each physical port.  Note that
        access to the particuler instance of dot1dSrPortLocalSegment
        requires knowledge of how the agent supports the multiple
        'contexts' required to implement RFC 1525 for multiple
        VLANs; also note that the assignment of ifIndex values may
        be different in different 'contexts'.
" 
    ::= { vtpNotificationsObjects 1 }
-- Conformance Information

vtpMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoVtpMIB 3 }

vtpMIBCompliances  OBJECT IDENTIFIER
    ::= { vtpMIBConformance 1 }

vtpMIBGroups  OBJECT IDENTIFIER
    ::= { vtpMIBConformance 2 }


-- compliance statements

vtpMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 1 }

vtpMIBCompliance2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroup
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 2 }

vtpMIBCompliance3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroup
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDot1qTunnel
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only for interface which doesn't
        support dot1q tunnel feature.
"
    ::= { vtpMIBCompliances 3 }

vtpMIBCompliance4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroup
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDot1qTunnel
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only for interface which doesn't
        support dot1q tunnel feature.
"
    ::= { vtpMIBCompliances 4 }

vtpMIBCompliance5 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroup
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDot1qTunnel
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only for interface which doesn't
        support dot1q tunnel feature.
"
    ::= { vtpMIBCompliances 5 }

vtpMIBCompliance6 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDot1qTunnel
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only for interface which doesn't
        support dot1q tunnel feature.
"
    ::= { vtpMIBCompliances 6 }

vtpMIBCompliance7 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3). Write access for transparent(3)
        is not required.
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDot1qTunnel
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only for interface which doesn't
        support dot1q tunnel feature.
"
    ::= { vtpMIBCompliances 7 }

vtpMIBCompliance8 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpDot1qTunnelGroup2
    DESCRIPTION        "This group is mandatory for all the ports which
        implement dot1qtunnel feature.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3). Write access for transparent(3)
        is not required.
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 8 }

vtpMIBCompliance9 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3). Write access for transparent(3)
        is not required.
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 9 }

vtpMIBCompliance10 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroup,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 10 }

vtpMIBCompliance11 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroupRev1,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 11 }

vtpMIBCompliance12 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroupRev1,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    GROUP           vtpInternalVlanGrp
    DESCRIPTION        "Implementation of this group is optional.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 12 }

vtpMIBCompliance13 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroupRev1,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    GROUP           vtpInternalVlanGrp
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vlanStatsGroup
    DESCRIPTION        "This group is mandatory for agents capable of
        providing VLAN statistics information.
"

    GROUP           vtpConfigNotificationsGroup6
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup7
    DESCRIPTION        "Implementation of this group is optional.
"

    OBJECT          managementDomainRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          vlanTrunkPortRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required, and only one
        of the six enumerated values for the
        RowStatus textual convention need be
        supported, specifically: active(1).
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainLocalMode
    SYNTAX          INTEGER  {
                        client(1),
                        server(2),
                        transparent(3)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "This object is read-only if vtpVersion
        is none(3).
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 13 }

vtpMIBCompliance14 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroupRev1,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpTrunkPruningGroup
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPruningGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPortGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtpTrunkPortGroup3
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpConfigNotificationsGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup3
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup4
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    GROUP           vtpInternalVlanGrp
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vlanStatsGroup
    DESCRIPTION        "This group is mandatory for agents capable of
        providing VLAN statistics information.
"

    GROUP           vtpConfigNotificationsGroup6
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup7
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPruningGroup3
    DESCRIPTION        "This group is mandatory for devices which
        support operational VTP pruning state.
"

    GROUP           vtpConfigNotificationsGroup8
    DESCRIPTION        "This group is mandatory for devices which
        support the notification generation on operational 
        VTP pruning state change.
"

    OBJECT          vtpNotificationsEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanCreatedNotifEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanDeletedNotifEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainPruningState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpInternalVlanAllocPolicy
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditOperation
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBufferOwner
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditConfigRevNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditName
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditMtu
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditDot10Said
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditRingNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBridgeNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditStpType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditParentVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    WRITE-SYNTAX    INTEGER  {
                        createAndGo(4),
                        destroy(6)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.

        Support for createAndWait and notInService is not required.
"

    OBJECT          vtpVlanEditTranslationalVlan1
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTranslationalVlan2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBridgeType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditAreHopCount
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditSteHopCount
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditIsCRFBackup
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansPruningEligible
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDynamicState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVtpEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled2k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled3k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled4k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible2k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible3k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible4k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortSetSerialNo
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDiscoverAction
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseTakeOverPrimary
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseTakeOverPassword
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthPassword
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthPasswordType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthSecretKey
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 14 }

vtpMIBCompliance15 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION        "The compliance statement for VTP implementations.
"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        vtpBasicGroup,
                        vtpVlanInfoGroup,
                        vtpConfigNotificationsGroupRev1,
                        vtpStatsGroup,
                        vtpTrunkPortGroup,
                        vtpVersion2BasicGroup,
                        vtpNotificationObjectsGroup
                    }

    GROUP           vtpTrunkPruningGroup
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPruningGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPortGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpVlanInfoEditGroup
    DESCRIPTION        "This group must be implemented by VTP Servers.
        VTP Clients need not implement these objects, and
        must not allow VLANs to be created, modified, or
        destroyed using these objects.
"

    GROUP           vtpTrunkPortGroup3
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtp4kVlanGroupRev1
    DESCRIPTION        "This group must be implemented by the VTP Servers
        which support the range of VlanIndex between 1024
        and 4095.
"

    GROUP           vtpVlanIfIndexGroup
    DESCRIPTION        "This group is an optional group containing
        objects providing information about the mapping
        of VLAN ID to its corresponding IfIndex.
"

    GROUP           vtpVlanInfoEditGroup2
    DESCRIPTION        "This group is mandatory for devices which only support
        one VLAN editing for each 'apply' operation.
"

    GROUP           vtpVlanNotifEnabledGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        notifications/traps in vtpConfigNotificationsGroup3.
"

    GROUP           vtpConfigNotificationsGroup2
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup3
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup4
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpDiscoverGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP discovery.
"

    GROUP           vtpDatabaseGroup
    DESCRIPTION        "This group is mandatory for devices which support the
        VTP distribution of different database types.
"

    GROUP           vtpAuthGroup
    DESCRIPTION        "This group is mandatory for devices which support
        asymmetric keys authentication mechanism for VTP.
"

    GROUP           vtpInternalVlanGrp
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vlanStatsGroup
    DESCRIPTION        "This group is mandatory for agents capable of
        providing VLAN statistics information.
"

    GROUP           vtpConfigNotificationsGroup6
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpConfigNotificationsGroup7
    DESCRIPTION        "Implementation of this group is optional.
"

    GROUP           vtpTrunkPruningGroup3
    DESCRIPTION        "This group is mandatory for devices which
        support operational VTP pruning state.
"

    GROUP           vtpConfigNotificationsGroup8
    DESCRIPTION        "This group is mandatory for devices which
        support the notification generation on operational 
        VTP pruning state change.
"

    GROUP           vlanTrunkPortActiveVlansGroup
    DESCRIPTION        "This group is mandatory for devices capable of
        providing active vlans information for trunk
        capable ports.
"

    OBJECT          vtpNotificationsEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanCreatedNotifEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanDeletedNotifEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainName
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainTftpServer
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainTftpPathname
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainPruningState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          managementDomainVersionInUse
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpInternalVlanAllocPolicy
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditOperation
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBufferOwner
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditConfigRevNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditName
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditMtu
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditDot10Said
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditRingNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBridgeNumber
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditStpType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditParentVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditRowStatus
    SYNTAX          INTEGER  {
                        active(1)
                    }
    WRITE-SYNTAX    INTEGER  {
                        createAndGo(4),
                        destroy(6)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.

        Support for createAndWait and notInService is not required.
"

    OBJECT          vtpVlanEditTranslationalVlan1
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTranslationalVlan2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditBridgeType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditAreHopCount
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditSteHopCount
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditIsCRFBackup
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlanEditTypeExt2
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortManagementDomain
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortEncapsulationType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortNativeVlan
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortRowStatus
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansPruningEligible
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortDynamicState
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVtpEnabled
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled2k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled3k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortVlansEnabled4k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible2k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible3k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpVlansPruningEligible4k
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vlanTrunkPortSetSerialNo
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDiscoverAction
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseLocalMode
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseTakeOverPrimary
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpDatabaseTakeOverPassword
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthPassword
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthPasswordType
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"

    OBJECT          vtpAuthSecretKey
    MIN-ACCESS      read-only
    DESCRIPTION        "Write access is not required.
"
    ::= { vtpMIBCompliances 15 }

-- units of conformance

vtpBasicGroup OBJECT-GROUP
    OBJECTS         {
                        vtpVersion,
                        vtpMaxVlanStorage,
                        vtpNotificationsEnabled,
                        managementDomainName,
                        managementDomainLocalMode,
                        managementDomainConfigRevNumber,
                        managementDomainLastUpdater,
                        managementDomainLastChange,
                        managementDomainTftpServer,
                        managementDomainTftpPathname,
                        managementDomainRowStatus
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing basic status and control
        of a VTP implementation.
"
    ::= { vtpMIBGroups 1 }

vtpVlanInfoGroup OBJECT-GROUP
    OBJECTS         {
                        vtpVlanState,
                        vtpVlanType,
                        vtpVlanName,
                        vtpVlanMtu,
                        vtpVlanDot10Said,
                        vtpVlanRingNumber,
                        vtpVlanBridgeNumber,
                        vtpVlanStpType,
                        vtpVlanParentVlan,
                        vtpVlanTranslationalVlan1,
                        vtpVlanTranslationalVlan2,
                        vtpVlanBridgeType,
                        vtpVlanAreHopCount,
                        vtpVlanSteHopCount,
                        vtpVlanIsCRFBackup
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects for monitoring VLAN information.
"
    ::= { vtpMIBGroups 13 }

vtpVlanInfoEditGroup OBJECT-GROUP
    OBJECTS         {
                        vtpVlanEditOperation,
                        vtpVlanApplyStatus,
                        vtpVlanEditBufferOwner,
                        vtpVlanEditConfigRevNumber,
                        vtpVlanEditState,
                        vtpVlanEditType,
                        vtpVlanEditName,
                        vtpVlanEditMtu,
                        vtpVlanEditDot10Said,
                        vtpVlanEditRingNumber,
                        vtpVlanEditBridgeNumber,
                        vtpVlanEditStpType,
                        vtpVlanEditParentVlan,
                        vtpVlanEditRowStatus,
                        vtpVlanEditTranslationalVlan1,
                        vtpVlanEditTranslationalVlan2,
                        vtpVlanEditBridgeType,
                        vtpVlanEditAreHopCount,
                        vtpVlanEditSteHopCount,
                        vtpVlanEditIsCRFBackup
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects for editing VLAN information in VTP
        Servers.
"
    ::= { vtpMIBGroups 14 }

vtpStatsGroup OBJECT-GROUP
    OBJECTS         {
                        vtpInSummaryAdverts,
                        vtpInSubsetAdverts,
                        vtpInAdvertRequests,
                        vtpOutSummaryAdverts,
                        vtpOutSubsetAdverts,
                        vtpOutAdvertRequests,
                        vtpConfigRevNumberErrors,
                        vtpConfigDigestErrors
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing VTP statistics.
"
    ::= { vtpMIBGroups 4 }

vtpTrunkPortGroup OBJECT-GROUP
    OBJECTS         {
                        vlanTrunkPortManagementDomain,
                        vlanTrunkPortEncapsulationType,
                        vlanTrunkPortVlansEnabled,
                        vlanTrunkPortNativeVlan,
                        vlanTrunkPortRowStatus,
                        vlanTrunkPortSetSerialNo
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information on trunk
        ports.
"
    ::= { vtpMIBGroups 5 }

vtpTrunkPortGroup2 OBJECT-GROUP
    OBJECTS         {
                        vlanTrunkPortDynamicState,
                        vlanTrunkPortDynamicStatus,
                        vlanTrunkPortVtpEnabled
                    }
    STATUS          current
    DESCRIPTION        "Additional functionality added to the
        vlanTrunkPortTable.
"
    ::= { vtpMIBGroups 11 }

vtpTrunkPortGroup3 OBJECT-GROUP
    OBJECTS         { vlanTrunkPortEncapsulationOperType }
    STATUS          current
    DESCRIPTION        "Additional functionality added to the
        vlanTrunkPortTable.
"
    ::= { vtpMIBGroups 15 }

vtpTrunkPruningGroup OBJECT-GROUP
    OBJECTS         {
                        vlanTrunkPortInJoins,
                        vlanTrunkPortOutJoins,
                        vlanTrunkPortOldAdverts,
                        vlanTrunkPortVlansPruningEligible,
                        vlanTrunkPortVlansXmitJoined,
                        vlanTrunkPortVlansRcvJoined
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information on VLAN
        pruning.
"
    ::= { vtpMIBGroups 7 }

vtpTrunkPruningGroup2 OBJECT-GROUP
    OBJECTS         { managementDomainPruningState }
    STATUS          current
    DESCRIPTION        "A collection of object providing information on whether
        VLAN pruning is enabled.
"
    ::= { vtpMIBGroups 10 }

vtpVersion2BasicGroup OBJECT-GROUP
    OBJECTS         { managementDomainVersionInUse }
    STATUS          current
    DESCRIPTION        "The object required to indicate the version of VTP in
        use by a management domain.
"
    ::= { vtpMIBGroups 12 }

vtpConfigNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        vtpConfigDigestError,
                        vtpConfigRevNumberError,
                        vtpServerDisabled,
                        vtpMtuTooBig,
                        vtpVersionOneDeviceDetected,
                        vlanTrunkPortDynamicStatusChange
                    }
    STATUS          deprecated
    DESCRIPTION        "The notifications which a VTP implementation is
        required to implement.
"
    ::= { vtpMIBGroups 6 }

vtp4kVlanGroup OBJECT-GROUP
    OBJECTS         {
                        vtpVlanTypeExt,
                        vtpVlanEditTypeExt,
                        vlanTrunkPortVlansEnabled2k,
                        vlanTrunkPortVlansEnabled3k,
                        vlanTrunkPortVlansEnabled4k,
                        vtpVlansPruningEligible2k,
                        vtpVlansPruningEligible3k,
                        vtpVlansPruningEligible4k,
                        vlanTrunkPortVlansXmitJoined2k,
                        vlanTrunkPortVlansXmitJoined3k,
                        vlanTrunkPortVlansXmitJoined4k,
                        vlanTrunkPortVlansRcvJoined2k,
                        vlanTrunkPortVlansRcvJoined3k,
                        vlanTrunkPortVlansRcvJoined4k
                    }
    STATUS          deprecated
    DESCRIPTION        "A collection of objects providing information
        for VLANS with VlanIndex from 1024 to 4095.
"
    ::= { vtpMIBGroups 16 }

vtpDot1qTunnelGroup OBJECT-GROUP
    OBJECTS         {
                        vlanTrunkPortsDot1qTag,
                        vlanTrunkPortDot1qTunnel
                    }
    STATUS          deprecated
    DESCRIPTION        "A collection of objects providing information
        for dot1qtunnel feature.
"
    ::= { vtpMIBGroups 17 }

vtpVlanIfIndexGroup OBJECT-GROUP
    OBJECTS         { vtpVlanIfIndex }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information
        for mapping of VLAN ID to its corresponding
        ifIndex.
"
    ::= { vtpMIBGroups 18 }

vtpVlanInfoEditGroup2 OBJECT-GROUP
    OBJECTS         { vtpVlanEditModifiedVlan }
    STATUS          current
    DESCRIPTION        "A collection of objects for editing VLAN information when
        only one VLAN is allowed to be edited for each 'apply'
        operation.
"
    ::= { vtpMIBGroups 19 }

vtp4kVlanGroupRev1 OBJECT-GROUP
    OBJECTS         {
                        vtpVlanTypeExt,
                        vtpVlanEditTypeExt2,
                        vlanTrunkPortVlansEnabled2k,
                        vlanTrunkPortVlansEnabled3k,
                        vlanTrunkPortVlansEnabled4k,
                        vtpVlansPruningEligible2k,
                        vtpVlansPruningEligible3k,
                        vtpVlansPruningEligible4k,
                        vlanTrunkPortVlansXmitJoined2k,
                        vlanTrunkPortVlansXmitJoined3k,
                        vlanTrunkPortVlansXmitJoined4k,
                        vlanTrunkPortVlansRcvJoined2k,
                        vlanTrunkPortVlansRcvJoined3k,
                        vlanTrunkPortVlansRcvJoined4k
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information
        for VLANS with VlanIndex from 1024 to 4095.
"
    ::= { vtpMIBGroups 20 }

vtpNotificationObjectsGroup OBJECT-GROUP
    OBJECTS         { vtpVlanPortLocalSegment }
    STATUS          current
    DESCRIPTION        "A collection of objects included in VTP notifications.
"
    ::= { vtpMIBGroups 21 }

vtpDot1qTunnelGroup2 OBJECT-GROUP
    OBJECTS         { vlanTrunkPortsDot1qTag }
    STATUS          deprecated
    DESCRIPTION        "A collection of objects providing information
        for dot1qtunnel feature.
"
    ::= { vtpMIBGroups 22 }

vtpConfigNotificationsGroup2 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        vtpLocalModeChanged,
                        vtpVersionInUseChanged
                    }
    STATUS          current
    DESCRIPTION        "The notifications which a VTP implementation is
        required to implement.
"
    ::= { vtpMIBGroups 23 }

vtpVlanNotifEnabledGroup OBJECT-GROUP
    OBJECTS         {
                        vtpVlanCreatedNotifEnabled,
                        vtpVlanDeletedNotifEnabled
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects to indicate whether a
        certain group of notifications are enabled.
"
    ::= { vtpMIBGroups 24 }

vtpConfigNotificationsGroup3 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        vtpVlanCreated,
                        vtpVlanDeleted
                    }
    STATUS          current
    DESCRIPTION        "The notifications implemented by a device which
        supports these features.
"
    ::= { vtpMIBGroups 25 }

vtpConfigNotificationsGroup4 NOTIFICATION-GROUP
   NOTIFICATIONS    { vtpVlanRingNumberConflict }
    STATUS          current
    DESCRIPTION        "The notifications implemented by a device which
        supports these features.
"
    ::= { vtpMIBGroups 26 }

vtpDiscoverGroup OBJECT-GROUP
    OBJECTS         {
                        vtpDiscoverAction,
                        vtpDiscoverStatus,
                        vtpLastDiscoverTime,
                        vtpDiscoverResultIndex,
                        vtpDiscoverResultDatabaseName,
                        vtpDiscoverResultConflicting,
                        vtpDiscoverResultDeviceId,
                        vtpDiscoverResultPrimaryServer,
                        vtpDiscoverResultRevNumber,
                        vtpDiscoverResultSystemName
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information of
        VTP discovery.
"
    ::= { vtpMIBGroups 27 }

vtpDatabaseGroup OBJECT-GROUP
    OBJECTS         {
                        vtpDatabaseName,
                        vtpDatabaseLocalMode,
                        vtpDatabaseRevNumber,
                        vtpDatabasePrimaryServer,
                        vtpDatabasePrimaryServerId,
                        vtpDatabaseTakeOverPrimary,
                        vtpDatabaseTakeOverPassword
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information of
        VTP databases.
"
    ::= { vtpMIBGroups 28 }

vtpAuthGroup OBJECT-GROUP
    OBJECTS         {
                        vtpAuthPassword,
                        vtpAuthPasswordType,
                        vtpAuthSecretKey
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information of
        VTP authentication mechanism.
"
    ::= { vtpMIBGroups 29 }

vtpConfigNotificationsGroupRev1 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        vtpConfigDigestError,
                        vtpConfigRevNumberError,
                        vtpVersionOneDeviceDetected,
                        vlanTrunkPortDynamicStatusChange
                    }
    STATUS          current
    DESCRIPTION        "The notifications which a VTP implementation is
        required to implement.
"
    ::= { vtpMIBGroups 30 }

vtpConfigNotificationsGroup5 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        vtpServerDisabled,
                        vtpMtuTooBig
                    }
    STATUS          deprecated
    DESCRIPTION        "The additional notifications that may be
        related to a VTP implementation.
"
    ::= { vtpMIBGroups 31 }

vtpInternalVlanGrp OBJECT-GROUP
    OBJECTS         {
                        vtpInternalVlanAllocPolicy,
                        vtpInternalVlanOwner
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information of
        internal VLANs.
"
    ::= { vtpMIBGroups 32 }

vlanStatsGroup OBJECT-GROUP
    OBJECTS         {
                        vlanStatsVlans,
                        vlanStatsExtendedVlans,
                        vlanStatsInternalVlans,
                        vlanStatsFreeVlans
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing VLAN statistics
        information in the system.
"
    ::= { vtpMIBGroups 33 }

vtpConfigNotificationsGroup6 NOTIFICATION-GROUP
   NOTIFICATIONS    { vtpServerDisabled }
    STATUS          current
    DESCRIPTION        "The additional notifications that may be
        related to a VTP implementation.
"
    ::= { vtpMIBGroups 34 }

vtpConfigNotificationsGroup7 NOTIFICATION-GROUP
   NOTIFICATIONS    { vtpMtuTooBig }
    STATUS          current
    DESCRIPTION        "The additional notifications that may be
        related to a VTP implementation.
"
    ::= { vtpMIBGroups 35 }

vtpTrunkPruningGroup3 OBJECT-GROUP
    OBJECTS         { managementDomainPruningStateOper }
    STATUS          current
    DESCRIPTION        "A collection of objects providing information on
        operational VTP pruning state in a manamgement domain.
"
    ::= { vtpMIBGroups 36 }

vtpConfigNotificationsGroup8 NOTIFICATION-GROUP
   NOTIFICATIONS    { vtpPruningStateOperChange }
    STATUS          current
    DESCRIPTION        "The additional notifications for operational
        VTP pruning state change in a management domain.
"
    ::= { vtpMIBGroups 37 }

vlanTrunkPortActiveVlansGroup OBJECT-GROUP
    OBJECTS         {
                        vlanTrunkPortVlansActiveFirst2k,
                        vlanTrunkPortVlansActiveSecond2k
                    }
    STATUS          current
    DESCRIPTION        "A collection of objects providing active vlan
        information for a trunking port in a management
        domain.
"
    ::= { vtpMIBGroups 38 }

END







                
                
            
			
        
   
Help  |  Feedback