Guest

Tools & Resources

SNMP Object Navigator


CISCO-MEMORY-POOL-MIB

View compiling dependencies for other MIBS by clearing the page and selecting another MIB.

Compile the MIB

Before you can compile CISCO-MEMORY-POOL-MIB , you need to compile the MIBs listed below in the order listed.

Download all of these MIBs (Warning: does not include non-Cisco MIBs) or view details about each MIB below.

If you are using Internet Explorer click here.

      MIB Name   Version 1   Version 2   Dependencies
    1. SNMPv2-SMI Download  |  Download  |  View Dependencies
    2. SNMPv2-TC Download  |  Download  |  View Dependencies
    3. CISCO-SMI Download  |  Download  |  View Dependencies
    4. SNMPv2-CONF Not Required  |  Download  |  View Dependencies
    5. CISCO-QOS-PIB-MIB Download  |  Download  |  View Dependencies
    6. RFC1155-SMI   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    7. RFC-1212   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    8. RFC-1215   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    9. SNMPv2-TC-v1   Non-Cisco MIB   |  Non-Cisco MIB   |  -
    10. CISCO-MEMORY-POOL-MIB Download  |  Download  | 

More Downloads

OID File: CISCO-MEMORY-POOL-MIB.oid
Capability File: CISCO-MEMORY-POOL-CAPABILITY

Extra Information

  • How to Get Free and Largest Block of Contiguous Memory Using SNMP

    MIB Contents

    This is the SMI version 2 of the MIB. Click here to see the SMI version 1
            
    		
                
                    
                        
    
    
    -- *****************************************************************
    -- CISCO-MEMORY-POOL-MIB
    --
    -- February 1996, Jeffrey T. Johnson
    --
    -- July 2001, Seth Wang
    --
    -- Copyright (c) 2001 by cisco Systems, Inc.
    -- All rights reserved.
    -- *****************************************************************
    
    CISCO-MEMORY-POOL-MIB DEFINITIONS ::= BEGIN
    
    IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Integer32,
        Gauge32
            FROM SNMPv2-SMI
        TEXTUAL-CONVENTION,
        DisplayString,
        TruthValue
            FROM SNMPv2-TC
        MODULE-COMPLIANCE,
        OBJECT-GROUP
            FROM SNMPv2-CONF
        ciscoMgmt
            FROM CISCO-SMI
        Percent
            FROM CISCO-QOS-PIB-MIB;
    
    ciscoMemoryPoolMIB MODULE-IDENTITY
        LAST-UPDATED    "200107310000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
            "Postal: Cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, CA 95134-1706
            USA
    
            Tel: +1 408 526 4000
    
            E-mail: cs-snmp@cisco.com"
        DESCRIPTION        "MIB module for monitoring memory pools
    "
        REVISION  "200107310000Z"
        DESCRIPTION        "Added a new table, ciscoMemoryPoolUtilizationTable, which
             provides information about memory utilization.
    "
        REVISION  "199602010000Z"
        DESCRIPTION        "Initial version of this MIB module.
    "
        ::= { ciscoMgmt 48 }
    
    CiscoMemoryPoolTypes ::= TEXTUAL-CONVENTION
        STATUS        current
        DESCRIPTION        "Represents the different types of memory pools that
            may be present in a managed device.  Memory pools can
            be roughly categorized into two groups, predefined
            pools and dynamic pools.  The following pool types
            are currently predefined:
                1:  processor memory
                2:  i/o memory
                3:  pci memory
                4:  fast memory
                5:  multibus memory
    
            Dynamic pools will have a pool type value greater than
            any of the predefined types listed above.
    
            Note that only the processor pool is required to be
            supported by all devices.  Support for other pool types
            is dependent on the device being managed.
    "
        SYNTAX        Integer32 (1..65535)
    
    ciscoMemoryPoolObjects
        OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 1 }
    
    ciscoMemoryPoolTable OBJECT-TYPE
        SYNTAX        SEQUENCE OF CiscoMemoryPoolEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION        "A table of memory pool monitoring entries.
    "
        ::= { ciscoMemoryPoolObjects 1 }
    
    ciscoMemoryPoolEntry OBJECT-TYPE
        SYNTAX        CiscoMemoryPoolEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION        "An entry in the memory pool monitoring table.
    "
        INDEX        { ciscoMemoryPoolType }
        ::= { ciscoMemoryPoolTable 1 }
    
    CiscoMemoryPoolEntry ::=
        SEQUENCE {
            ciscoMemoryPoolType               CiscoMemoryPoolTypes,
            ciscoMemoryPoolName               DisplayString,
            ciscoMemoryPoolAlternate          Integer32,
            ciscoMemoryPoolValid              TruthValue,
            ciscoMemoryPoolUsed               Gauge32,
            ciscoMemoryPoolFree               Gauge32,
            ciscoMemoryPoolLargestFree        Gauge32
        }
    
    ciscoMemoryPoolType OBJECT-TYPE
        SYNTAX        CiscoMemoryPoolTypes
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION        "The type of memory pool for which this entry
            contains information.
    "
        ::= { ciscoMemoryPoolEntry 1 }
    
    ciscoMemoryPoolName OBJECT-TYPE
        SYNTAX        DisplayString
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "A textual name assigned to the memory pool.  This
            object is suitable for output to a human operator,
            and may also be used to distinguish among the various
            pool types, especially among dynamic pools.
    "
        ::= { ciscoMemoryPoolEntry 2 }
    
    ciscoMemoryPoolAlternate OBJECT-TYPE
        SYNTAX        Integer32 (0..65535)
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Indicates whether or not this memory pool has an
            alternate pool configured.  Alternate pools are
            used for fallback when the current pool runs out
            of memory.
    
            If an instance of this object has a value of zero,
            then this pool does not have an alternate.  Otherwise
            the value of this object is the same as the value of
            ciscoMemoryPoolType of the alternate pool.
    "
        ::= { ciscoMemoryPoolEntry 3 }
    
    ciscoMemoryPoolValid OBJECT-TYPE
        SYNTAX        TruthValue
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Indicates whether or not the remaining objects in
            this entry contain accurate data.  If an instance
            of this object has the value false (which in and of
            itself indicates an internal error condition), the
            values of the remaining objects in the conceptual row
            may contain inaccurate information (specifically, the
            reported values may be less than the actual values).
    "
        ::= { ciscoMemoryPoolEntry 4 }
    
    ciscoMemoryPoolUsed OBJECT-TYPE
        SYNTAX        Gauge32
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Indicates the number of bytes from the memory pool
            that are currently in use by applications on the
            managed device.
    "
        ::= { ciscoMemoryPoolEntry 5 }
    
    ciscoMemoryPoolFree OBJECT-TYPE
        SYNTAX        Gauge32
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Indicates the number of bytes from the memory pool
            that are currently unused on the managed device.
    
            Note that the sum of ciscoMemoryPoolUsed and
            ciscoMemoryPoolFree is the total amount of memory
            in the pool
    "
        ::= { ciscoMemoryPoolEntry 6 }
    
    ciscoMemoryPoolLargestFree OBJECT-TYPE
        SYNTAX        Gauge32
        UNITS         "bytes"
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "Indicates the largest number of contiguous bytes
            from the memory pool that are currently unused on
            the managed device.
    "
        ::= { ciscoMemoryPoolEntry 7 }
    
    ciscoMemoryPoolUtilizationTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF CiscoMemoryPoolUtilizationEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION    "A table of memory pool utilization entries. Each of the
         objects provides a general idea of how much of the memory
         pool has been used over a given period of time. It is
         determined as a weighted decaying average.
    "
      ::= { ciscoMemoryPoolObjects 2 }
    
    ciscoMemoryPoolUtilizationEntry OBJECT-TYPE
      SYNTAX      CiscoMemoryPoolUtilizationEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION    "An entry in the memory pool utilization table.
    "
      AUGMENTS { ciscoMemoryPoolEntry }
      ::= { ciscoMemoryPoolUtilizationTable 1 }
    
    CiscoMemoryPoolUtilizationEntry ::=
      SEQUENCE {
        ciscoMemoryPoolUtilization1Min  Percent,
        ciscoMemoryPoolUtilization5Min  Percent,
        ciscoMemoryPoolUtilization10Min Percent
      }
    
    ciscoMemoryPoolUtilization1Min OBJECT-TYPE
        SYNTAX        Percent
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "This is the memory pool utilization for 1 minute.
    "
        ::= { ciscoMemoryPoolUtilizationEntry 1 }
    
    ciscoMemoryPoolUtilization5Min OBJECT-TYPE
        SYNTAX        Percent
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "This is the memory pool utilization for 5 minutes.
    "
        ::= { ciscoMemoryPoolUtilizationEntry 2 }
    
    ciscoMemoryPoolUtilization10Min OBJECT-TYPE
        SYNTAX        Percent
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION        "This is the memory pool utilization for 10 minutes.
    "
        ::= { ciscoMemoryPoolUtilizationEntry 3 }
    
    -- notifications
    
    ciscoMemoryPoolNotifications
        OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 2 }
    
    -- (no notifications are currently defined)
    
    
    -- conformance information
    
    ciscoMemoryPoolConformance
        OBJECT IDENTIFIER ::= { ciscoMemoryPoolMIB 3 }
    ciscoMemoryPoolCompliances
        OBJECT IDENTIFIER ::= { ciscoMemoryPoolConformance 1 }
    ciscoMemoryPoolGroups
        OBJECT IDENTIFIER ::= { ciscoMemoryPoolConformance 2 }
    
    
    -- compliance statements
    
    ciscoMemoryPoolCompliance MODULE-COMPLIANCE
        STATUS    deprecated -- superceded by ciscoMemoryPoolComplianceRev1
        DESCRIPTION        "The compliance statement for entities which implement
            the Cisco Memory Pool MIB
    "
        MODULE    -- this module
            MANDATORY-GROUPS { ciscoMemoryPoolGroup }
        ::= { ciscoMemoryPoolCompliances 1 }
    
    ciscoMemoryPoolComplianceRev1 MODULE-COMPLIANCE
        STATUS        current
        DESCRIPTION        "The compliance statement for entities which implement
            the Cisco Memory Pool MIB
    "
        MODULE    -- this module
            MANDATORY-GROUPS { ciscoMemoryPoolGroup }
    
            GROUP ciscoMemoryPoolUtilizationGroup
            DESCRIPTION            "Per memory pool utilization statistics is mandatory for
                the managed system that supports memory pool utilization.
    "
        ::= { ciscoMemoryPoolCompliances 2 }
    
    
    -- units of conformance
    
    ciscoMemoryPoolGroup OBJECT-GROUP
        OBJECTS {
            ciscoMemoryPoolName,
            ciscoMemoryPoolAlternate,
            ciscoMemoryPoolValid,
            ciscoMemoryPoolUsed,
            ciscoMemoryPoolFree,
            ciscoMemoryPoolLargestFree
        }
        STATUS        current
        DESCRIPTION        "A collection of objects providing memory pool monitoring.
    "
        ::= { ciscoMemoryPoolGroups 1 }
    
    ciscoMemoryPoolUtilizationGroup OBJECT-GROUP
        OBJECTS {
            ciscoMemoryPoolUtilization1Min,
            ciscoMemoryPoolUtilization5Min,
            ciscoMemoryPoolUtilization10Min
        }
        STATUS        current
        DESCRIPTION        "An optional group providing a collection of memory pool
            utilization objects.
    "
        ::= { ciscoMemoryPoolGroups 2 }
    
    
    END
    
    
    
    
    
                    
                    
                
    			
            
       
  • Help  |  Feedback