|
|
|
1 - 10 of
2,357 results for
A Guideline to Provision Timing on ONS 15454
|
|
|
|
This document describes how you can provision timing on ONS 15454 through Cisco Transport Controller (CTC). CTC provides two methods for you to provision timing and modify the settings:
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080482baf.shtml
02 Dec 2005
This document provides guidelines to plan the timing and synchronization on Cisco ONS 15454.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a008047faaf.shtml
02 Jan 2006
This document explains how you can monitor synchronization performance, and troubleshoot timing alarms on Cisco ONS 15454.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a00804e1c44.shtml
06 Jan 2006
...the cards. This link is used to transmit protection switching messages and data. For information on how to provision ILK or internal patchcords, refer Cisco ONS 15454 DWDM Procedure Guide. Note With...protection mechanisms, the switch time of a copper SFP is 1 second. With...
www.cisco.com/en/US/docs/optical/15000r9_0/dwdm/reference/guide/454d90_txpmxpcard.html
03 Jul 2012
This document describes the total power consumption and the maximum thermal load of the ONS 15454 SONET Multiservice Provisioning Platform (MSPP). This document also explains the power consumption levels of the equipment and provides information to plan for possible power...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080094ae4.shtml
02 Feb 2006
...Timing wires are necessary to provision external timing. Step 3 Complete the "DLP-A21 Install LAN Wires on the Backplane" task as needed...TCC2/TCC2P) are necessary to create an external LAN connection...ESD wristband when working with a powered ONS 15454. For detailed instructions on...
www.cisco.com/en/US/docs/optical/15000r9_1/15454/sonet/procedure/guide/454a91_insshelfbc.html
29 Aug 2012
You encounter several common issues when you configure IP addresses and static routes you require on a network that runs ONS 15454 optical switches. This document uses a documented lab setup to guide you through a typical network configuration, and explains...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080094b1d.shtml
25 Jul 2007
...reversion process. There is a variable time period for the lag between...which you can set using the ONS 15454 software, CTC. To set the revertive delay...Procedure Guide. All cards in a protection group share the...reversion. 1:N Protection Guidelines The following rules apply... Working cards may sit on either or both sides of the...protection group must be manually provisioned as a protect slot because...
www.cisco.com/en/US/docs/optical/15000r4_0/planning/guide/OL455601.pdf
06 Dec 2007
5967KB
...Provisioning > Line> Ethernet Tab. To see the various parameters that can be configured on the ethernet ports, see the "CTC Display of ethernet Port Provisioning Status" section in the Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet...framing type, CRC, MTU and soak time for a port can be configured. It is possible to create an end-to-end circuit...
www.cisco.com/en/US/docs/optical/15000r9_6/dwdm/configuration/guide/454d96_provisiontmxpcards.html
05 Mar 2013
...Provisioning > Line> Ethernet Tab. To see the various parameters that can be configured on the ethernet ports, see the "CTC Display of ethernet Port Provisioning Status" section in the Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet...framing type, CRC, MTU and soak time for a port can be configured. It is possible to create an end-to-end circuit...
www.cisco.com/en/US/docs/optical/15000r9_3/dwdm/configuration/guide/454d93_provisiontmxpcards.html
05 Mar 2013
|
|
|
|
