|
|
Recommended Content
Support Toolbox
|
1 - 10 of
151 results for
ASA/PIX: Configure Active/Standby Failover in Transparent Mode
|
|
|
|
The failover configuration requires two identical security appliances connected to each other through a dedicated failover link and, optionally, a stateful failover link. The health of the active interfaces and units is monitored to determine if specific failover conditions...
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080aefd11.shtml
11 Aug 2009
The failover configuration requires two identical security appliances connected to each other through a dedicated failover link and, optionally, a stateful failover link. The health of the active interfaces and units is monitored to determine if specific failover conditions...
References:
237
TAC
|
8
Support Community
-
View All
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml
04 Nov 2009
The failover configuration requires two identical security appliances connected to each other through a dedicated failover link and, optionally, a stateful failover link. The health of the active interfaces and units is monitored to determine if specific failover conditions...
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080af750f.shtml
16 Sep 2009
This document describes how to configure transparent firewall for PIX/ASA.
References:
14
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml
26 Sep 2008
...address. Use the Failover page to configure basic failover settings for ASA and...system version, firewall mode (routed or transparent), and security contexts...the elements described in the following table may...Additional Steps for an Active/Standby Failover Configuration...49-6 Failover Page (ASA/PIX 7.0+) Element...
www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.4/user/guide/pxfailover.html
14 Jun 2012
...address. Use the Failover page to configure basic failover settings for ASA and...system version, firewall mode (routed or transparent), and security contexts...the elements described in the following table may...Additional Steps for an Active/Standby Failover Configuration...48-6 Failover Page (ASA/PIX 7.0+) Element...
www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.3/user/guide/pxfailover.html
14 Jun 2012
...address. Use the Failover page to configure basic failover settings for ASA and...system version, firewall mode (routed or transparent), and security contexts...the elements described in the following table may...Additional Steps for an Active/Standby Failover Configuration...48-6 Failover Page (ASA/PIX 7.0+) Element...
www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.2/user/guide/pxfailover.html
08 Sep 2011
...address. Use the Failover page to configure basic failover settings for ASA and...system version, firewall mode (routed or transparent), and security contexts...the elements described in the following table may...Additional Steps for an Active/Standby Failover Configuration...46-6 Failover Page (ASA/PIX 7.0+) Element...
www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.1/user/guide/pxfailover.html
16 Mar 2011
...section, select the failover mode: Active/Active or Active/Standby. Step 8...it is operating in single or multiple mode—some options...Settings Dialog Box (ASA/PIX 7+) •Advanced...these steps to configure an interface for LAN Failover communications...
www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.0/user/guide/pxfailover.html
18 Jun 2010
...Active Failover in Transparent Mode 16/Sep/2009 ASA/PIX: Configure Active/Standby Failover in Transparent Mode 11/Aug...
References:
145
TAC
www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
25 Apr 2005
|
|
|
|
