|
|
|
1 - 10 of
2,135 results for
ATM to Frame-Relay Service Interworking Sample Configurations
|
|
|
|
This document presents a sample configuration of Frame Relay to ATM network interworking using FRF.5 on the LightStream 1010. This configuration also works on the Catalyst 8510 MSR or 8540 MSR.
www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a0080093d61.shtml
15 Nov 2007
The Frame Relay (FR) to ATM service interworking function allows communication between an FR end user and an ATM end user. It is based on the Frame Relay Forum (FRF.8) implementation agreement, which specifies that an FR end station may communicate...
www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a008009461d.shtml
15 Nov 2007
This document provides a sample configuration for Voice over IP using Multilink PPP over ATM and Frame Relay Interworking (VoIP using MLPoATM / MLPoFR). The central focus of the configuration examples is the provision of Quality of Service (QoS)...
www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a0080101210.shtml
02 Feb 2006
The Frame Relay Forum leavingcisco.com (FRF) defines the Frame Relay-to-ATM service interworking function in its FRF.8 implementation agreement. A typical configuration of FRF.8 consists of a Frame Relay endpoint, an ATM...
www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a00801747e3.shtml
15 Nov 2007
Consider proper traffic shaping throughout the construction of wide-area network links that connect ATM on one end and Frame Relay on the other. Without it, you can create a mismatched link. Any time that a network link transfers data from a fast link to a relatively slower...
www.cisco.com/en/US/tech/tk39/tk53/technologies_tech_note09186a00800c83b3.shtml
08 Aug 2006
This document describes permanent virtual circuit (PVC) management procedures over a FRF.8 service interworking (IWF) connection and provides a sample configuration using a router and a switch.
www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a00800945b3.shtml
15 Nov 2007
Multilink PPP over ATM and Multilink PPP over Frame Relay (MLPoATM and MLPoFR) was introduced in Cisco IOS® Software Release 12.1(5)T. This feature is targeted at customers with Frame Relay/ATM interworking (FR/ATM IW) that deploy Voice over IP...
www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800b6098.shtml
16 Aug 2007
This document provides configuration information for a service-interworking (SIW) connection over an inverse multiplexing for ATM (IMA) trunk group.
www.cisco.com/en/US/products/hw/switches/ps525/products_configuration_example09186a008009497f.shtml
23 Oct 2009
This document provides a technical overview of Link Fragmentation and Interleaving (LFI) over a Frame Relay to ATM Interworking (IWF) connection (as defined by the Frame Relay Forum or FRF.8 agreement),as well as a sample configuration for...
www.cisco.com/en/US/tech/tk39/tk51/technologies_tech_note09186a00801051b9.shtml
18 Dec 2007
This document provides configuration information for how to connect two BPX 8600 switches with narrowband trunks. Each BPX 8600 switch has an MGX 8220 Edge Concentrator connected as a feeder shelf. The customer premises equipment (CPE) is connected to the feeder shelf. A four T1...
www.cisco.com/en/US/products/hw/switches/ps525/products_configuration_example09186a008009484c.shtml
04 Oct 2005
|
|
|
|
