|
|
|
1 - 10 of
166 results for
BTM Out of Frame Errors
|
|
|
|
This document discusses the UXM/BTM BIP-8 code errors.
www.cisco.com/en/US/products/hw/modules/ps3909/products_tech_note09186a0080093d09.shtml
17 Apr 2009
This document discusses the Broadband Trunk Module (BTM) Remote E3 FarEnd Receiver Failure (T3 Remote Out Of Frame) error.
www.cisco.com/en/US/products/hw/modules/ps3909/products_tech_note09186a0080094168.shtml
17 Apr 2009
This error applies to the IGX Broadband Trunk Module (BTM) with a T3backcard.
www.cisco.com/en/US/products/hw/modules/ps3909/products_tech_note09186a0080093d0a.shtml
17 Apr 2009
...pix.shtml. Reset the AIT or BTM trunk card. This can be done by...recommended to first upgrade the AIT or BTM firmware, as this is the quickest...during which time the card will be out of operation. After the firmware...processor switch results in the trunk errors and frame drops, the software should be...
www.cisco.com/en/US/ts/fn/misc/fn971223.html
04 Apr 2005
...oof_criteria smallint Line out of frame (OOF) criteria (DSX3). • 1 = 3 of 8 framing bits in error • 2 = 3 of 16 framing bits...cyclic redundancy check (CRC) errors. Range: 0 to (2 32 –1) 6 Out of Multi-Frames — — Provides a count of the...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/database_interface/guide/dbase.pdf
11649KB
...table includes the description of each statistic and the point...point in Figure 4-1. Front Card BTM Back Cards AIT-E2, AIT-E3...ID IPX ATM Statistics Subset of Other Stats Ingress/Egress Measurement Point Description 2 Out of Frames No Ingress–1 Provides a count...to (2 32 –1) 9 Packet CRC Errors No Ingress–1 Provides a count...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.0.00/database_interface/guide/dbase.pdf
10632KB
...atm-cell-header-hec-errs 31 = frame-sync-errors 32 = rx-spacer-pkts-drpd...detailed information on the cause of the trap. This field is SET...37 = remote-cga 38 = remote-framing 39 = rmt-oom 40 = remote-alarm...46 = frame-sync-alarm 47 = out-of-mfm 48 = loss-of-cell...ftc-missing 76 = bxm-missing 77 = btm-hp-missing...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.0.00/user_snmp/guide/snmp.pdf
11471KB
...atm-cell-header-hec-errs 31 = frame-sync-errors 32 = rx-spacer-pkts-drpd...detailed information on the cause of the trap. This field is SET...37 = remote-cga 38 = remote-framing 39 = rmt-oom 40 = remote-alarm...46 = frame-sync-alarm 47 = out-of-mfm 48 = loss-of-cell...ftc-missing 76 = bxm-missing 77 = btm-hp-missing...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.3.00/user_snmp/guide/snmp.pdf
11281KB
...Narrowband ATM Statistics Subset of Other Stats Measurement Point...Description Attribute Value Front card BTM Back cards AIT-E2, AIT-E3...Stat ID IPX ATM Statistics Subset of Other Stats Measurement Point Description 2 Out of Frames No Ingress–1 Number of OOFs detected...232 –1) cells. 9 Packet CRC Errors No Ingress–1 Packets received...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.4.00/database_interface/guide/dbase.pdf
14783KB
...atm-cell-header-hec-errs 31 = frame-sync-errors 32 = rx-spacer-pkts-drpd...detailed information on the cause of the trap. This field is SET...37 = remote-cga 38 = remote-framing 39 = rmt-oom 40 = remote-alarm...46 = frame-sync-alarm 47 = out-of-mfm 48 = loss-of-cell...ftc-missing 76 = bxm-missing 77 = btm-hp-missing 78 = path-trace-failure...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/user_snmp/guide/snmp.pdf
11510KB
|
|
|
|
