|
|
|
1 - 10 of
3,058 results for
Behavior of RIP and IGRP When Sending and Receiving Updates
|
|
|
|
This document explains the series of actions taken by both Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) when they send or receive the routing updates.
www.cisco.com/en/US/tech/tk364/technologies_tech_note09186a0080093fd8.shtml
10 Aug 2005
This document explains two common problems with redistributing routes between RIP and OSPF or IGRP and EIGRP. RIP and IGRP will not advertise routes out an interface if those routes are on the same major network, but have a different mask than that particular interface. For...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093fd9.shtml
10 Aug 2005
A discontiguous network comprises a major net that separates another major net. In Figure 1, a subnet of network 172.20.0.0 separates network 172.16.0.0. 172.16.0.0 is a discontiguous network. This document describes why RIPv1 and IGRP do not support discontiguous networks and explains...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093fd6.shtml
10 Aug 2005
...each router to send all or a portion...a routing-update message at regular...intervals to each of its neighboring...Introduction to IGRP Design ...TechNotes) Behavior of RIP and IGRP When Sending and Receiving Updates How...
www.cisco.com/en/US/tech/tk365/tk352/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
...its metric. RIP is widely used...TechNotes) Behavior of RIP and IGRP When Sending and Receiving Updates How Does Load...
www.cisco.com/en/US/tech/tk365/tk554/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
The ability to specify a different subnet mask for the same network number on different subnets is called Variable-Length Subnet Mask (VLSM). RIPv1 and IGRP are classful protocols and are incapable of carrying subnet mask information in their updates.
www.cisco.com/en/US/tech/tk364/technologies_tech_note09186a0080093f1e.shtml
12 Aug 2005
...Routing Protocol (IGRP) network timers...which updates are sent. This is the...times the value of the update argument...becomes invalid when there is an absence of updates that...state when an update packet is received that indicates...
www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfigrp.html
16 Oct 2007
...the no form of this command...keywords. The behavior of this command...applicable only to RIP and IGRP. The software...incoming routing updates is on the same...defined for the receiving interface...packets, but sends only Version...
www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfrip.html
16 Oct 2007
...the no form of this command...keywords. The behavior of this command...applicable only to RIP and IGRP. The software...incoming routing updates is on the same...defined for the receiving interface...packets, but sends only Version...
www.cisco.com/en/US/docs/ios/iproute_rip/command/reference/irr_rip.html
10 Oct 2007
...not work well when the network topology...changes. Because IGRP and RIP have...different amounts of time to propagate...updates, one part of the network will...accept and use RIP routes. Running...ICMP) will send a "TTL exceeded...discards the routing update. You might...and you want to receive its updates...
www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfrip.html
07 May 2001
|
|
|
|