|
|
|
1 - 10 of
1,044 results for
Best Practices When Configuring Circuits on the ONS 15454
|
|
|
|
There are several best practices that Cisco recommends to follow when you configure circuits on the ONS 15454. This document uses a lab setup to demonstrate these best practices.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080093ead.shtml
27 Apr 2005
There are several common issues that arise when you configure timing on the Cisco ONS 15454. This document explains these issues and provides an example of a timing best practice that you can use in a four-node ONS 15454 network. This...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080094027.shtml
31 Jan 2006
You can encounter several common issues when you configure ONS 15454 nodes as a Bidirectional Line Switched Ring (BLSR). This document addresses such issues, and provides best practice examples to configure a BLSR ring. When you configure...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080093eac.shtml
19 May 2006
This document describes how to add and remove a 15454 node in a Unidirectional Path Switched Ring (UPSR). With the use of a fully documented lab setup with detailed explanations, the document walks the reader through the steps necessary to first add and then remove...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a00800944ef.shtml
12 Nov 2006
...Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide to install cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r8_0/ethernet/454/guide/r8rpr.html
18 Nov 2009
...Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide to install cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r9_0/ethernet/454/guide/45490a_configrpr.html
06 May 2010
...Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide to install cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r8_5/ethernet/454/guide/r85rpr.html
18 Nov 2009
...Cable" chapter of the Cisco ONS 15454 SDH Procedure Guide for procedures for installing cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r7_2/ethernet/guide/r72rpr.html
18 Nov 2009
...Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide to install cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r8_5_1/ethernet/454/guide/454a851_configrpr.html
07 Feb 2009
...Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide to install cards in ONS nodes. Step 24 Build an STS circuit with a circuit state of IS from the available POS port on Adjacent Node 1 to the available...building the circuit, see "Configuring CTC Circuits for Cisco Proprietary...RPR" section. Note A best practice is to configure SONET/SDH...
www.cisco.com/en/US/docs/optical/15000r8_5/ethernet/454/guide/r85rpr_external_docbase_0900e4b1806b8280_4container_external_docbase_0900e4b18179a66e.html
18 Nov 2009
|
|
|
|
