|
|
Recommended Content
Support Toolbox
|
1 - 10 of
88 results for
Best Practices for Catalyst 4500/4000, 5500/5000, and 6500/6000 Series Switches Running CatOS Configuration and Management
|
|
|
|
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a0080094713.shtml
29 Nov 2007
This document describes how to configure a management IP address on Catalyst 4500/4000, 5500/5000, and 6500/6000 series switches that run Catalyst OS (CatOS) and Cisco IOS® Software. This document also includes...
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008010e9ca.shtml
15 Mar 2006
This document introduces the concept of trunking between two Ethernet switches and focuses on the IEEE 802.1Q trunking standard. After a brief description of the 802.1Q trunking mechanism, the document describes the implementation on the Catalyst 4500/4000, 5500/5000,...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008012ecf3.shtml
26 May 2006
This document provides best practices for Catalyst 6500/6000 and 4500/4000 series switches that run Cisco IOS® Software on the Supervisor Engine.
References:
18
TAC
www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00801b49a4.shtml
03 Sep 2006
This document discusses the setup of an EtherChannel between a Cisco Catalyst 5500 switch and a Catalyst 6500 switch,both running Catalyst OS (CatOS). Any Catalyst 4500/4000,5500/5000,or 6500/6000 series...
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094790.shtml
16 Nov 2007
This document will show the basic configuration needed to set up an 802.3ad link aggregate between a Catalyst 6500/6000 (running Catalyst OS [CatOS] system software) and a Catalyst 4500/4000 switch. 802.3ad is a new specification from...
References:
21
TAC
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094470.shtml
14 Dec 2005
The Cisco Catalyst 4500/4000 series switches that run Catalyst OS (CatOS) software support web-based administration. The Catalyst Web Interface (CWI) is a web browser-based tool that enables this type of administration. The tool is available...
www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094156.shtml
06 Jul 2007
This document provides sample configurations for IEEE 802.1Q trunking between Catalyst switches running Catalyst OS (CatOS) system software and modular Layer 3 (L3) switches running Cisco IOS® System Software. Switches running...
www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a0080094784.shtml
17 Nov 2007
This document provides basic information on how to configure interVLAN routing on a Catalyst switch (running Catalyst OS [CatOS] system software) using an internal router (Layer 3 [L3] card/module). The term internal router refers to these L3 cards/modules on the Catalyst...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bf9a.shtml
30 Aug 2005
This document provides information on how to troubleshoot common issues on the Cisco Catalyst 6500/6000 Series Switches that run Catalyst OS (CatOS) system software (CatOS on the Supervisor Engine and Cisco IOS® Software on the Multilayer...
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015504b.shtml
29 Jun 2007
|
|
|
|
