1 - 10 of
7,010 results for
Bridging Wireless Bandwidth
Wireless bridging provides a simple method for connecting building sites without cabling or can be used as a backup to existing wired links. If you have hundreds of nodes or bandwidth-hungry applications and data transmitting between sites, bridging your networks will require...
05 Jan 2010
...facilities. Cisco Aironet wireless bridges were installed at each county...The resulting increase in bandwidth allowed remote users to...And because Cisco Aironet wireless bridges include advanced QoS, educators...distance learning, and other bandwidth-intensive applications...
06 May 2005
...Bridge Security with the Cisco Wireless Security Suite Intelligent...The Cisco Aironet 1400 Series Wireless Bridge utilizes Cisco IOS® Software...point-to-point links is also possible. Bandwidth can be increased between bridged...
04 Jan 2005
...Point-to-Point Bridge Configuration ...provide increased bandwidth or backup redundancy...aggregation or increased bandwidth occurs when both wireless links are used to...when one wireless bridge link is used only...
29 Jun 2007
...its default setting, then the bridge sends a beacon containing a DTIM...The factory setting for Cisco wireless LAN systems is Radio Channel...Each channel covers 22 MHz. The bandwidth for channels 1, 6, and 11 does...so you can set up multiple bridges in the same vicinity without...
05 May 2007
This document provides information on the most frequently asked questions about Cisco Aironet Wireless Bridges.
19 Oct 2009
...of service (QoS) when the wireless LAN is experiencing congestion...sufficient QoS as long as the wireless LAN is not congested. However...types of CAC are available: bandwidth-based CAC and load-based...See the "Configuring 802.3 Bridging" section for QoS and WMM configuration...
01 Aug 2011
Cisco WAP121 Wireless-N Access Point with Single Point Setup with support for IPv6 and high-bandwidth Wireless-N technology is ideal for small businesses.
07 Feb 2013
...LEAP) client. The Workgroup Bridge authenticates to an Access Control...factors, such as the data rate (bandwidth) desired, the antenna type...A. The Ethernet port of the bridge supports 10 Mbps over a 10baseT...shielded microwave ovens, and wireless equipment manufactured by other...
31 Jul 2007
...has added support for workgroup bridge (WGB) functionality. Before...need to use Universal Work Group Bridge (UWGB) mode to connect to a Cisco Unified Wireless network. By use of WGB...services because they offer the most bandwidth; however, when a WLAN connection...
06 May 2008