|
|
|
1 - 10 of
533 results for
Build a Resilient Packet Ring with Four Nodes Through ML Card on Cisco ONS 15454
|
|
|
|
This document describes the configuration to build a Resilient Packet Ring (RPR) with four nodes through Multi-Layer (ML) cards on Cisco ONS 15454.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080429651.shtml
28 Sep 2005
This documentdescribes the procedure to configure EtherChannel and 802.1Q tunneling using a Cisco Catalyst 3500XL switch and the ML-Series card across the Resilient Packet Ring (RPR) in an Cisco ONS 15454 environment.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a008065990b.shtml
10 Apr 2006
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r9_1/ethernet/310/guide/31091_configrespath.html
03 Nov 2009
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r8_5_1/ethernet/310/guide/310a851_configrespath.html
14 Feb 2011
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r8_0/ethernet/310/guide/3108rpr.html
05 Feb 2009
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r8_5/ethernet/310/guide/385rpr.html
05 Feb 2009
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r9_0/ethernet/310/guide/31090_configrespath.html
14 Feb 2011
...ring topology, add the node to the ring. Refer to the "Add and Remove Nodes" chapter of the Cisco ONS 15454 Procedure Guide. Step 15 If the ML-Series card in the new node is not...card. If you do not have a prepared startup configuration...new node is configured with RPR before its POS ports...manually enabled or enabled through the configuration file. Step 17 Build an STS circuit with a circuit...the available POS port on Adjacent Node 1 to the...
www.cisco.com/en/US/docs/optical/15000r8_5/ethernet/310/guide/385rpr_external_docbase_0900e4b1806b9828_4container_external_docbase_0900e4b181772a36.html
05 Feb 2009
...This chapter covers Cisco proprietary RPR. Chapter...Configuring IEEE 802.17b Resilient Packet Ring on the ML-MR-10 Card" covers IEEE 802.17b...directly or indirectly through point-to-point STS...are configured on the ONS node and are transported over...node's SONET/SDH topology with either protected or unprotected...SONET/SDH mechanism, Cisco proprietary RPR provides...redundant protection path that a SONET/SDH protected...
www.cisco.com/en/US/docs/optical/15000r9_0/ethernet/454/guide/45490a_configrpr.html
06 May 2010
...This chapter covers Cisco proprietary RPR. Chapter...Configuring IEEE 802.17b Resilient Packet Ring" covers IEEE 802.17b based RPR. The ML-Series cards in an SPR must connect directly or indirectly through point-to-point STS...circuits are configured on the ONS node and are transported over...node's SONET/SDH topology with either protected or unprotected...SONET/SDH mechanism, Cisco proprietary RPR provides...redundant protection path that a SONET/SDH protected...
www.cisco.com/en/US/docs/optical/15000r8_0/ethernet/454/guide/r8rpr.html
18 Nov 2009
|
|
|
|
