|
|
|
1 - 10 of
534 results for
Busy Signal after Last Digit Dialed on H323 Incoming Call to Cisco CallManager with Missing Codec Statement
|
|
|
|
This problem can be caused by the failure to configure a codec on the dial-peer for a device that places calls over the dial peer. In the example in this document, a device that requires g711ulaw attempts to make a call over a dial peer....
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800945d6.shtml
20 Jan 2006
This document assists with the initial configuration of a basic H.323 gateway between Cisco CallManager and an H.323-capable device such as a Cisco 2620 router. The configuration of both the Cisco CallManager and the H.323 gateway is shown.
References:
16
TAC
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml
19 Jun 2008
...Upgrade Fails Due to Potential Critical...Integration Busy Signal after Last Digit Dialed on H323 Incoming Call to Cisco CallManager with Missing Codec Statement 20/Jan...
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_tech_notes_list.html
25 Apr 2005
Cisco Unified Communications Manager Version 7.1
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_71.html
19 Apr 2013
Cisco Unified Communications Manager Version 8.5
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_85.html
19 Apr 2013
Cisco Unified Communications Manager Version 8.0
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_80.html
19 Apr 2013
Cisco Unified Communications Manager Version 7.0
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_70.html
19 Apr 2013
...Dial Peers on Cisco IOS Platforms...Oct/2006 Busy Signal after Last Digit Dialed on H323 Incoming Call to Cisco CallManager with Missing Codec Statement 20/Jan...
www.cisco.com/en/US/tech/tk652/tk701/tsd_technology_support_troubleshooting_technotes_list.html
25 Apr 2005
...only H.323 to H.323 calls. The interwork keyword is only used with IP-to-IP gateways connecting...one side to slow connect on the other for basic audio calls. Configure the interwork...configuration mode or on both the incoming and outgoing dial peers. Codecs must be...both dial-peers and the codec transparent command should...selected: voice service class h323 1000 call start slow...RSVP and the H.323 voice signaling protocol. call rsvp-sync...between endpoints in a Cisco IPIPGW. debug call rsvp-sync...
www.cisco.com/en/US/docs/ios/voice/command/reference/vr_cr.pdf
19128KB
...privacy-on-hold 827 refer target dial-peer 834 register-id...ringing 1091 speed-dial (voice rlogout-profile...transfer-recall 1140 transfer-digit-collect 1149 New...Removed Commands for Cisco Unified CME 4.0 and... Modified Commands codec (ephone) 209 codec...523 param max-time-call-retry 718 user-locale...pool) 825 privacy-on-hold (voice register...198 Modified Commands busy-trigger-per-button...New Commands accept 30 after-hour login http 38...550 lpcor type 553 lpor incoming 548 mlpp service-domain...chapter contains commands to configure and maintain...known as Cisco Unified CallManager Express). The commands...
www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cmeallht.pdf
9184KB
|
|
|
|
