|
|
|
1 - 10 of
992 results for
CallManager: Dialed Number Does not Display on Calling Phone
|
|
|
|
Traditional PBXs typically allow the configuration of multiple appearances of the same Dialed Number (DN) on different lines of a single phone. For example, if a user extension is 1002, they might have three or four buttons on their phone that all correspond...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009409c.shtml
16 Feb 2006
Cisco CallManager installations in North America are able to use the '@' macro in the route patterns to allow the use of variable length dial plans. If a caller dials a seven digit local number, or a ten/eleven digit long distance number, the call will be sent...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800945b9.shtml
10 Jan 2006
Since Cisco CallManager 3.3, there is a new feature called Cisco Call Back. The Cisco Call Back feature allows you to receive call back notification on your Cisco IP phone when a called party line becomes available. IP phone user A calls...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a0080191057.shtml
25 Feb 2009
This document describes how to add a prefix to the missed call number in a Cisco CallManager environment. In reality, this procedure adds prefixes to all inbound calling numbers regardless of whether the recipient answers the call.
References:
6
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml
07 May 2007
Call Pickup and Group Call Pickup are features that allow a user to answer an incoming call that rings on a telephone other than the user's own. This document explains how to configure and use the Call Pickup and Group Call Pickup features.
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094380.shtml
24 Feb 2012
Architecture for Voice, Video, and Integrated Data (AVVID) designs generally recommend that you have a primary and secondary Cisco CallManager server for redundancy. If the primary Cisco CallManager server fails, the secondary Cisco CallManager server takes over and the IP phones...
References:
3
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080094852.shtml
03 Feb 2006
This document provides information about how to install and configure the United Kingdom Numbering Plan (UKNP).
References:
5
TAC
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008028af3a.shtml
05 Jan 2012
This document describes one reason why an external-to-internal call cannot be forwarded to external sites and provides a solution in a Cisco CallManager environment.
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080618a74.shtml
28 Feb 2006
The Tool for Auto-Registered Phones Support (TAPS) works in conjunction with the Bulk Administration Tool (BAT). After the BAT is used to bulk add phones with dummy MAC addresses to Cisco CallManager Administration, you can plug the phones into the network. The administrator...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008021feae.shtml
04 May 2007
This document describes how to resolve the fast busy problem in a Cisco IP Phone when a caller gets a fast busy from the call forwarded number and the forwarded call fails.
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00809b3b06.shtml
30 May 2008
|
|
|
|
