|
|
|
1 - 10 of
57 results for
Catalyst 2948G-L3 Sample Configurations - Full Device Configurations
|
|
|
|
This document provides three sample configurations for the Catalyst 2948G-L3. The configurations are a single-VLAN network, a multi-VLAN network, and a multi-VLAN distribution layer connection to a network core. Each configuration section contains an example...
www.cisco.com/en/US/products/hw/switches/ps672/products_tech_note09186a0080093f8f.shtml
30 Aug 2005
This document provides a sample configuration for a IEEE 802.1Q trunk between a Catalyst 6500 Series Switch that runs Catalyst OS (CatOS), and the Catalyst 2948G-L3 Switch. This document contains a sample network that has Catalyst 2948G-L3...
www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00806e1f70.shtml
13 Jul 2006
This document is an extension of the<a href="http://www.cisco.com/en/US/customer/products/hw/switches/ps672/products_tech_note09186a0080093f8f.shtml">Catalyst2948G-L3 Sample Configurations - Single VLAN,Multi-VLAN,and Multi-VLANDistribution Layer Connecting to Network Core</a> document....
www.cisco.com/en/US/products/hw/switches/ps672/products_tech_note09186a0080093dca.shtml
16 Nov 2007
This document describes the set-up of an EtherChannel and 802.1Q trunking between Catalyst 2950 and Catalyst 2948G-L3 switches. EtherChannel can be called Fast EtherChannel (FEC) or Gigabit EtherChannel (GEC) depending upon the speed of the interfaces or ports used to form...
www.cisco.com/en/US/products/hw/switches/ps607/products_configuration_example09186a008014c203.shtml
16 Nov 2007
...forwarded through the affected device in transit between two other...or directly on individual devices. This notice will be... This section describes Catalyst 2948G-L3 and Catalyst 4908G-L3 switch...protocol size using the sdm size configuration command and reload the switch...
www.cisco.com/en/US/docs/switches/lan/catalyst2948gand4908g/release/note/78_13139.html
04 May 2007
...apply to switches running Catalyst operating system software...any local IP address on the Catalyst 2948G-L3 switch router will be consumed...Configure static ARPs on the device. (CSCdt43641) This...CSCdp37972) •In configurations with a large number of bridge...
www.cisco.com/en/US/docs/switches/lan/catalyst2948gand4908g/release/note/OL_2351.html
04 May 2007
Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide IOS Software, Release 12.0(18)W5(22a) Command...
www.cisco.com/en/US/docs/switches/lan/catalyst2948gand4908g/12.0_18_w5_22a/configuration/guide/cmd_ref.html
05 May 2007
This document discusses and provides a sample configuration of Fast EtherChannel (FEC) and 802.1Q trunking, between a Catalyst 2948G-L3 switch that runs Cisco IOS® software and switches that run CatalystOS (all models, including Catalyst 4000, 5000, and 6000...
www.cisco.com/en/US/products/hw/switches/ps672/products_configuration_example09186a00801258ff.shtml
30 Aug 2005
This document provides a sample configuration for the Catalyst 4908G-L3 switch to support inter-VLAN routing and bridging VLANs between several Layer 2 (L2) switches.
www.cisco.com/en/US/products/hw/switches/ps672/products_configuration_example09186a00800941b4.shtml
06 Oct 2005
...Switches 16/Nov/2007 Configuration Catalyst 2948G-L3 Sample Configurations - Full Device Configurations 16/Nov...
www.cisco.com/en/US/products/hw/switches/ps637/prod_configuration_examples_list.html
25 Apr 2005
|
|
|
|
