|
|
Recommended Content
Support Toolbox
|
1 - 10 of
45 results for
Change the SS7 M3UA SUA Alarm Severity to Avoid Failover in the Cisco PGW 2200
|
|
|
|
This document describes how to change the Cisco PGW 2200 alarm severities for signaling links to avoid inappropriate failovers. The document applies more specifically to Service Provider networks using the Cisco...
www.cisco.com/en/US/products/hw/vcallcon/ps2152/products_tech_note09186a00801f9783.shtml
02 Feb 2006
...Ethernet Interfaces on the PGW Platform 04/Dec... 02/Feb/2006 Change the SS7 M3UA SUA Alarm Severity to Avoid Failover in the Cisco PGW 2200 02/Feb/2006 ...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/prod_configuration_examples_list.html
25 Apr 2005
...Savings Time Change in Australia on Voice Products... 02/Feb/2006 Change the SS7 M3UA SUA Alarm Severity to Avoid Failover in the Cisco PGW 2200 02/Feb/2006 ...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/prod_tech_notes_list.html
25 Apr 2005
...to display the document you selected. Change the SS7 M3UA SUA Alarm Severity to Avoid Failover in the Cisco PGW 2200 02/Feb...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_maintain_and_operate_technotes_list.html
25 Apr 2005
...P:) stats from Gateway in CDR Change Request. This patch provides updates the following: •engine •libcmg...superseded by the fixes provided in patch CSCOgs015. The superseded...using the patch utility script to install a newer version of...caveat numbers: Identifier Severity Component Description CSCec85728...platform.log on standby PGW for HSI calls. CSCec10170...CSCed10639 3 iocm UNK alarm seen after dynamic reconfiguration...updates the following: •ca •SS7 •EISUP •ISDNL3 •MGCP •SIP •TALI •IUA •M3UA •SUA •simWriter •ioChanMgr...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn941.html
03 Aug 2007
...detailed description, cause, alarm type, severity, and action of this alarm, see Cisco PGW 2200 Softswitch Release 9 Messages...message/errmsg.html To view the archived alarm, view alm.csv in the folder /opt/CiscoMGC...1208761935,127,0,2,"SS7 Signaling Service Unavailable...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9.8/Maintenance/Guide/r9chap3.html
10 May 2010
...adds the M3UA protocol for the VXSM entry in extNodeTypes.dat. The combination of M3UA and MGCP/H248 is supported on the VXSM/MGX8880 from the Cisco PGW 2200 Softswitch side. Note Because SS7 and MGCP/H.248 are backhauled to the same single VXSM card...that same VXSM as an M3UA, SUA, or IUA signaling gateway...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn973.html
05 Jan 2012
...IUA and SCTP, the Cisco PGW 2200 can now use standard protocols for communication with the media gateways. For more...SIP Remote Party ID Support in the New Features in This...for PRI Sigpath —this change request enables the *.FastConnect...patch) from http://www.cisco.com/pcgi-bin/tablebuild.pl/mgc-952 to your /opt/SW directory...caveat numbers: Identifier Severity Component Description ...CSCsb46404 3 mml For SS7 AOC there is not check for... CSCsb49491 3 engine PGW core dumps when receiving...SIP •TALI •IUA •M3UA •SUA •LI •ISDNBRI •TCAP...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn952.html
10 Jul 2008
...caveat numbers: Identifier Severity Component Description...ioccisdnl3 ISDNBRI core after failover. CSCsc58687 2 engine when stop and start PGW ,the core.engine accure...analysisCapabilityLevel=0 parm in XECfgParm. CSCsc25521 3 alarm Alarm Manager re-initialize...no reply. CSCsc52521 3 m3ua PGW: M3UA goes OOS...CSCsb70755 3 provision unable to prov-add:association...of release 9: Identifier Severity Component Description...corrupted after dial plan change. CSCsb89411 2 mml PGW...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn961.html
19 Nov 2009
...Cisco SC 2200 Signaling Controller Change the SS7 M3UA SUA Alarm Severity to Avoid Failover in the Cisco PGW 2200 02/Feb...
www.cisco.com/en/US/products/hw/vcallcon/ps2152/prod_tech_notes_list.html
25 Apr 2005
|
|
|
|
