|
|
|
1 - 10 of
1,309 results for
Changing Settings for CNR Server Logs
|
|
|
|
This document provides the process for changing the log size and the number of logs for the DNS, DHCP, and TFTP servers in Cisco Network Registrar. The procedure is different depending on the CNR version used:
www.cisco.com/en/US/products/sw/netmgtsw/ps1982/products_tech_note09186a0080094ec5.shtml
26 Oct 2005
This article has two purposes. First, it contains recommendations on how to configure the Cisco Network Registrar (CNR) for optimum performance and stability and how to monitor your CNR installation. Second, it contains recommendations on how you should react if a problem does occur....
www.cisco.com/en/US/products/sw/netmgtsw/ps1982/products_tech_note09186a0080094ec4.shtml
26 Oct 2005
This document provides details on configuring and troubleshooting Dynamic Domain Name Services (DDNS) on Cisco Network Registrar (CNR).
www.cisco.com/en/US/products/hw/voiceapp/ps967/products_tech_note09186a0080094ec8.shtml
10 Jan 2006
The Data-over-Cable Service Interface Specifications (DOCSIS) mandate that cable modems negotiate their IP addresses with DHCP. Cisco Network Registrar (CNR) provides comprehensive Domain Name System (DNS) and DHCP administrative functionality. CNR also provides TFTP server functionality.
www.cisco.com/en/US/tech/tk648/tk361/technologies_problem_troubleshooting09186a0080093fad.shtml
26 Oct 2005
...in place: •Separate Linux server for generating a keystore file...Administrative access to the GSS. •CNR installed on the GSS. This...Creating a Keystore File on a Linux Server •Copying a Keystore File...Troubleshooting Access Mode Change Problems To create a keystore...the following steps: 1. Log in to the Linux server using...
www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v3.0/administration/guide/CNR.html
21 Aug 2008
...List of hosts running the time server specified in the RFC 868 standard...stored in time-stamping error logs. MCNS-security-server – IP address of the security...security is required. See RFC 1533 for details. Cisco Network Registrar...setup only; it does not cover setting up DNS or configuring dynamic...should be familiar with important CNR concepts including scopes, primary...
www.cisco.com/en/US/docs/ios/cable/configuration/guide/cmts_svcs_cnr.pdf
204KB
...interface must be in sync with the CNR tool. To properly communicate...Release 12.0—Command has been changed to the following global option...packets are forwarded to the DHCP server. Use this command to set a...that primary addresses are used for CMs and secondary addresses are...Cable Modems Define these settings following the CNR tool documentation: • TFTP...
www.cisco.com/en/US/docs/cable/cmts/ubr7200/configuration/guide/u72_cnr.pdf
388KB
...3-5 Information About Setting Domain Aliases 3-6 Setting Domain Aliases 3-6 Domain...3-8 Configuring the PRPC Server 3-8 C H A P T E R 4 CNR Log Messages 4-1 Log Messages...This document is intended for System Administrators and Integrators...Revision History Description of Changes • Updated for release 3...
www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel315/cnr_leg315/cnr_leg.pdf
644KB
...Logging section to view the log settings. Make changes to these settings as desired, click Modify Server, then reload the server. (See Table 23-3 on page 23-13 for the log settings to maximize DHCP server... Installation install_cnr_log Both Installation...
www.cisco.com/en/US/docs/net_mgmt/network_registrar/7.1/user/guide/UG06_Ser.html
10 Dec 2009
...filter. Change this parameter...a sample CNR configuration...generate a log message. setting 0 disables...transactions. log_interval=100 •Setting the Lease...set. The CNR LEG can... •59 For additional...the PRPC Server Note...can also change the timeout...
www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel36x/sm_legs/Configuring_the_CNR_LEG_and_the_SM.html
29 Oct 2010
|
|
|
|
