|
|
Recommended Content
Support Toolbox
Cisco Software CentralGet quotes, place orders, register and manage licenses, and download software, upgrades, and patches. Log in required.
|
1 - 10 of
74 results for
Configure EtherChannel Between Catalyst 4500/4000, 5500/5000, and 6500/6000 Switches That Run CatOS System Software
|
|
|
|
EtherChannel allows multiple physical Fast Ethernet or Gigabit Ethernet links to be combined into one logical channel. A logical channel allows load sharing of traffic among the links in the channel as well as redundancy in the event that one or more links in the channel fail. EtherChannel...
www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a00800949c2.shtml
14 Aug 2006
This document describes how to configure a management IP address on Catalyst 4500/4000, 5500/5000, and 6500/6000 series switches that run Catalyst OS (CatOS) and Cisco IOS® Software. This document also includes...
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008010e9ca.shtml
15 Mar 2006
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a0080094713.shtml
29 Nov 2007
This document discusses the setup of an EtherChannel between a Catalyst 5500/5000 switch running Catalyst OS (CatOS) and a Catalyst 6500/6000 or Catalyst 4500/4000 switch running Cisco...
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094953.shtml
25 Oct 2006
This document offers a sample configuration and command structure for the setup of an EtherChannel link that is a trunk link between a Catalyst Layer 2 (L2) fixed configuration switch, which includes the 2950/2955/2970/2940/2900XL/3500XL switches, and a Catalyst...
www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a0080094aec.shtml
16 Nov 2007
This document will show the basic configuration needed to set up an 802.3ad link aggregate between a Catalyst 6500/6000 (running Catalyst OS [CatOS] system software) and a Catalyst 4500/4000 switch. 802.3ad is...
References:
21
TAC
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094470.shtml
14 Dec 2005
This document discusses the setup of an EtherChannel between a Cisco Catalyst 5500 switch and a Catalyst 6500 switch,both running Catalyst OS (CatOS). Any Catalyst 4500/4000,5500/5000,or 6500/6000...
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094790.shtml
16 Nov 2007
This document provides best practices for Catalyst 6500/6000 and 4500/4000 series switches that run Cisco IOS® Software on the Supervisor Engine.
References:
18
TAC
www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00801b49a4.shtml
03 Sep 2006
This document provides sample configurations for InterSwitch Link (ISL) and 802.1q trunking between a Catalyst 6500/6000 switch that runs CatOS and a Cisco 7500 router that can do InterVLAN routing. The results of each command are displayed...
www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a008014859e.shtml
01 Sep 2005
This sample configuration sets up an EtherChannel between a Cisco Catalyst 6500 that runs Catalyst OS (CatOS) and a Catalyst 3500XL switch. EtherChannel can be called Fast EtherChannel (FEC) or Gigabit EtherChannel (GEC)....
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094689.shtml
18 Sep 2008
|
|
|
|
