|
|
Recommended Content
Support Toolbox
|
1 - 10 of
9,585 results for
Configuring Client Modems to Work with Cisco Access Servers
|
|
|
|
When you troubleshoot modem connections, it is important to evaluate three main areas: the client modem, the telco network and the Network Access Server (NAS). You must ensure that the modems on either side, and the telco network work properly,...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094a65.shtml
03 Sep 2006
This document discusses ways to verify the performance of the digital modems at the network access server (NAS) as well as the T1/E1 line connected to the NAS. It will not discuss the performance or configuration of the client side modems. For more information...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009478d.shtml
09 Jul 2007
Many Internet Service Providers (ISPs) purchase 56k modems and V.92 capable modems so that their users can use V.90 connection speeds. Unfortunately,V.90 performance can be elusive. In many cases,this is due in part to the many different client modems used by customers.
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009491b.shtml
05 Feb 2010
In certain environments where a non-Cisco cable modem (CM) is used, and the CM is only capable of bridging, a Cisco router, such as the Cisco 806, can be connected to the CM via the Ethernet interface. The routing is then performed by the router behind the CM. The next step...
www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a0080094be1.shtml
23 May 2006
This document provides information on how to configure and troubleshoot V.92 and V.44 dial-up modems.
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094939.shtml
22 Nov 2005
Tactical Software's DialOut/EZ product allows desktop LAN users to share network access server (NAS) ports as a modem pool for outbound asynchronous communications.
www.cisco.com/en/US/products/hw/univgate/ps501/products_configuration_example09186a00800a1992.shtml
29 Jan 2008
This document explains how to attach a US Robotics modem to the Console port of Cisco routers that have RJ-45 console ports. This procedure can be used for other modem brands as well,however you must consult your modem documentation for the equivalent initialization...
References:
5
TAC
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00800941c9.shtml
05 Feb 2010
This document briefly explains the basics of how to fine tune modems. For more information on how to configure specific modems, refer to the modem documentation links on 808hi.com
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094eba.shtml
29 Jan 2008
Modern analogue modem communications have become very complex. The latest technologies no longer rely on a simple basic layout, but expect the telephone company (Telco) cloud be built on digital technology end-to-end. This has led to a dramatic increase in bandwidth at the cost of increased...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094eb9.shtml
03 Sep 2006
This document describes how to configure an Access Server to accept incoming Async and ISDN calls on ISDN T1 PRI circuits.
www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080094557.shtml
29 Jan 2008
|
|
|
|
