|
|
|
1 - 10 of
36,032 results for
Configuring DNS on Cisco Routers
|
|
|
|
The purpose of this document is to bring together certain points aboutDomain Name System (DNS) use by Cisco routers.
References:
5
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800c525f.shtml
30 Sep 2008
This document addresses the issue of translating..... domain server (255.255.255.255) messages appearing on the router after an invalid command is entered in user or enabled mode.
www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00802015c8.shtml
02 Aug 2006
Secure Shell (SSH) is a protocol which provides a secure remote access connection to network devices. Communication between the client and server is encrypted in both SSH version 1 and SSH version 2. Implement SSH version 2 when possible because it uses a more enhanced security encryption algorithm.
References:
66
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml
28 Jun 2007
This document demonstrates how to configure a connection between a router and the Cisco VPN Client 4.x using Remote Authentication Dial-In User Service (RADIUS) for user authentication. Cisco IOS® Software Releases 12.2(8)T and later support connections from Cisco VPN...
References:
10
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800946b7.shtml
07 Feb 2007
In certain environments where a non-Cisco cable modem (CM) is used, and the CM is only capable of bridging, a Cisco router, such as the Cisco 806, can be connected to the CM via the Ethernet interface. The routing is then performed by the router behind the CM. The next...
www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a0080094be1.shtml
23 May 2006
...option VPN ID requirements on different interfaces to be reached from one Cisco router. The following section...about this feature: •Configuring DHCP Relay Agent Support...information option (option 82) on a per interface basis...requirements to be reached from one Cisco router. The following section...about this feature: •Configuring Relay Agent Information...
References:
6
TAC
|
5
Support Community
-
View All
www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html
17 Nov 2006
This document provides basic information on how to configure interVLAN routing on a Catalyst switch (running Catalyst OS [CatOS] system software) using an internal router (Layer 3 [L3] card/module). The term internal router refers to these L3 cards/modules on...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bf9a.shtml
30 Aug 2005
...DNS queries and then answers DNS queries using the permanent and...Director is enabled, the TTL on locally defined resource records...may have been specified for the DNS name server by the use of the ip dns primary command. To configure a Cisco IOS router as a DNS server, use the following...
www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfipadr.html
23 May 2005
...exception is a failover group configured with the preempt command...will become active if it is configured with the preempt command and if the unit on which it failed is its preferred...Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Logging...
References:
15
TAC
www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/fail_f.html
07 Nov 2007
Certain dialin clients require Windows Internet Naming Service (WINS), and/or Domain Naming System (DNS) server information in order to properly connect to the network.
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a00800f66b9.shtml
29 Jan 2008
|
|
|
|
