|
|
|
1 - 10 of
435 results for
Configuring Dialout using a Modem on the AUX Port
|
|
|
|
This document shows how to use a modem on the AUX port to configure dialout. In this scenario, a router with a modem on the AUX port dials the Primary Rate Interface (PRI) of the...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094579.shtml
02 Mar 2005
In many situations, it would be necessary to allow a router to accept interactive command processor of Cisco IOS (EXEC) calls with a modem connected to the auxiliary (AUX) port of the router. This document provides the necessary configuration tasks...
References:
4
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
09 Sep 2005
This document provides information about configuring dial-on-demand routing (DDR) backup for a serial,WAN,or leased line link using the dialer watch feature. The backup link uses modems on the AUX ports of both routers....
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093d2b.shtml
05 Feb 2010
This sample configuration shows you how to directly connect two routers,without a modem or other data communication equipment (DCE) devices. For more information on how to configure modems on auxiliary (AUX) or console ports,see <a href="http://www.cisco.com/en/US/customer/tech/tk801/tk36/technologies_tech_note09186a008009428b.shtml">Modem-Router...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c7b.shtml
05 Feb 2010
This sample configuration illustrates how to configure a T1 or E1 interface for outgoing analog calls using the modem dialout controller command
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c1b.shtml
15 Jan 2008
Cisco routers and certain switches support out-of-band connectivity (primarily for disaster recovery) with use of a modem that connects to the AUX port or console port. Cisco Catalyst switches do not have AUX ports. Therefore, the...
www.cisco.com/en/US/products/hw/switches/ps679/products_tech_note09186a0080094b30.shtml
27 Jun 2007
Dial-on-demand routing (DDR) backup is used to provide backup to a WAN link (for example, Frame Relay and T1) using any DDR or a dial-capable interface. Common DDR backup links include ISDN BRIs, modems on auxiliary ports and T1/E1s.
www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080093c6d.shtml
09 Sep 2005
...allow incoming and outgoing modem calls on this line transport input...flowcontrol hardware line aux 0 line vty 0 4 password ww... In this 3600 chassis, the NM-8AM card is installed...async interface you should configure, use the show line command to find...Hence, to configure the first modem in the card configure line...order to troubleshoot the dialout connection: Check the...to the modem and initiate a dialout. Reverse telnet out the port to the modem, and use the...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093d2a.shtml
04 Feb 2010
This document describes how to configure an Access Server for incoming and outgoing calls on the same T1 PRI. The incoming and outgoing calls are all traffic-based and use Dial-on-Demand Routing (DDR) but do not provide backup for any other router. If you wish...
www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080094559.shtml
14 Sep 2005
The sample configurations in this document illustrate how to configure Digital Number Identification Service (DNIS) support for a Primary Rate Interface (PRI) and how to set up modem pooling. Three configurations are provided:
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094898.shtml
09 Sep 2005
|
|
|
|
