|
|
|
1 - 10 of
34 results for
Configuring ISL Trunking on Catalyst 5500/5000 and 6500/6000 Family Switches
|
|
|
|
This document introduces the concept of trunking between two Ethernet switches and focuses on the IEEE 802.1Q trunking standard. After a brief description of the 802.1Q trunking mechanism, the document describes the implementation on the Catalyst 4500/4000,...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008012ecf3.shtml
26 May 2006
...procedure to configure ISL trunking between Catalyst 5500/5000 and Catalyst...5000 and 6500/6000 series switches. However...Catalyst 6500/6000 series switch. There...is based on these software...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801429fb.shtml
07 Dec 2007
This document provides sample configurations for InterSwitch Link (ISL) and 802.1q trunking between a Catalyst 6500/6000 switch that runs CatOS and a Cisco 7500 router that can do InterVLAN routing. The results of each command are displayed as they are executed....
www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a008014859e.shtml
01 Sep 2005
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that you are running Catalyst...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a0080094713.shtml
29 Nov 2007
This document offers a sample configuration and command structure for the setup of an EtherChannel link that is a trunk link between a Catalyst Layer 2 (L2) fixed configuration switch, which includes the 2950/2955/2970/2940/2900XL/3500XL switches, and a Catalyst 4500/4000...
www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a0080094aec.shtml
16 Nov 2007
This document provides sample configurations on Inter-Switch Link (ISL) between a Catalyst 5500 and a Catalyst 5000 switch, both running Catalyst OS (CatOS). Any Catalyst 5000 or 6000 family member running CatOS could be used in this scenario...
www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a00800941f0.shtml
30 Aug 2005
This document provides sample configurations for Fast EtherChannel (FEC), Inter-Switch Link (ISL), and 802.1Q trunking between a Catalyst 6500 switch that runs CatalystOS (CatOS) and a Cisco 7500 router. The results of each command are displayed as they are executed....
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094b0a.shtml
01 Sep 2005
This document discusses the configuration of Inter-Switch Link Protocol (ISL) trunks on external Cisco routers like the 7500/7000, 3600, 4500, or 2500 series. This document does not discuss the configuration of ISL trunks on Layer 2 (L2)/Layer 3 (L3) switches...
www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a00800949fc.shtml
30 Aug 2005
This document provides best practices for Catalyst 6500/6000 and 4500/4000 series switches that run Cisco IOS® Software on the Supervisor Engine.
References:
18
TAC
www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00801b49a4.shtml
03 Sep 2006
This document provides basic information on how to create VLANs on Catalyst switches that run Catalyst OS (CatOS) and Cisco IOS® System Software. The sample commands for each section use one Catalyst switch from each configuration section.
References:
11
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a008009478e.shtml
09 Jul 2007
|
|
|
|
