|
|
|
1 - 10 of
127 results for
Configuring Single Router Mode Redundancy and BGP on a Cat6000 MSFC
|
|
|
|
This document provides a sample configuration for single router mode redundancy and Border Gateway Protocol (BGP) on a Catalyst 6000 Multilayer Switch Feature Card (MSFC).
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00800c3993.shtml
10 Aug 2005
This document contains five Border Gateway Protocol (BGP) case studies.
References:
57
TAC
|
12
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c95bb.shtml
30 Oct 2008
...Configuring a Gateway of...Verifying the BGP Conditional...Feature Configuring Single Router Mode Redundancy and BGP on a Cat6000 MSFC Configuring the BGP Local-AS...
www.cisco.com/en/US/tech/tk365/tk80/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
...see section "MSFC Redundancy - Single Router Mode Redundancy" in the Catalyst...product/lan/cat6000/sw_8_4... Because the MSFC configurations...engines or MSFCs configured for SRM. As in...configured completely on the designated...not reload upon a high-availability...
References:
12
TAC
www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a0080088874.html
04 Feb 2006
...Aug/2005 Configuring Single Router Mode Redundancy and BGP on a Cat6000 MSFC 10/Aug/2005 Configuring the BGP Local-AS...
www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html
25 Apr 2005
...explicitly configures a different...MSFCs perform a “handshake...entering SRM mode. Do not...configuration changes on the nondesignated router during this...SRM# show redundancy Designated...enabled Single Router Mode...section “MSFC Redundancy - Single Router Mode Redundancy” in the...product/lan/cat6000/sw_8...Because the MSFC configurations...or MSFCs configured for SRM...completely on the designated...reload upon a high-availability...
www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a0080088874.pdf
998KB
...Commands 22-26 C H A P T E R 23 Configuring...Supervisor Engines on the Switch 23-4...23-5 Forcing a Switchover to the...Availability 23-8 Configuring Supervisor Engine Redundancy Using NSF with SSO...Examples 23-15 MSFC Redundancy 23-21...Redundancy 23-21 Single Router Mode Redundancy 23-43...
References:
5
TAC
www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/6000_cfg.pdf
13672KB
...not be restarted on a downstream interface...interface goes down on DFC CSCsg99914 all...power-cycles after BGP flap (not responding...CSCsj56086 all cat6000-acl WCCP and VACL cause Cisco router CPU High CSCsk41374...destination command crashes MSFC running in hybrid mode . CSCsg88433 all...all dhcp Error configuring dhcp option 67 CSCse13882...
References:
5
TAC
www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/release/notes/ol_13011.html
12 Jan 2012
...do not configure the single router mode with stateful...with SSO) redundancy mode with a WS-SVC-IPSEC-1...section on page 41...features. • BGP Policy Accounting...html • Single router mode with stateful...with SSO) redundancy mode for...with SSO on Supervisor...traffic. When a switchover...newly active MSFC. • SRM...If you configure MPLS, use...
www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.pdf
3100KB
...global configuration mode: Command Purpose Router(config)# cdma...should occur for a user who skips PPP...Protocol (SCTP) to a redundant PDSN...uses the Cisco IOS Redundancy Facility (RF) to...report transitions on Active and Standby PDSNs. Before configuring PDSN-SR, you need...availability of any single router. HSRP is...
www.cisco.com/en/US/docs/ios/mwpdsn/configuration/guide/mwpdsn_chap1_ps6350_TSD_Products_Configuration_Guide_Chapter.html
04 Apr 2008
|
|
|
|
