|
|
|
1 - 10 of
10,845 results for
Configuring VLAN Trunk Protocol (VTP)
|
|
|
|
This document provides information on how to configure VLAN Trunk Protocol (VTP).
References:
5
TAC
www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a0080890607.shtml
29 Nov 2011
VLAN Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN is distributed through all switches in the domain. This reduces the need to configure the same VLAN everywhere....
References:
17
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml
30 Jul 2007
This document provides information on how to troubleshoot VLAN Trunk Protocol (VTP).
References:
6
TAC
www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080890613.shtml
29 Jul 2007
...switch can exchange VLAN configuration information...connected through 802.1Q trunk ports. Inter-Switch...Cisco-proprietary protocol that maintains VLAN information as traffic...switches and routers. VTP VLAN Trunking Protocol...TechNotes (20) Configure Configuration Examples...
www.cisco.com/en/US/tech/tk389/tk689/tsd_technology_support_protocol_home.html
09 Oct 2010
...Restrictions •Configuring VTP VTP is a Layer 2 messaging protocol that maintains VLAN configuration consistency...within a VTP domain. A VTP domain (also called...that share the same VTP domain name and that are interconnected with trunks. VTP minimizes misconfigurations...
References:
12
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vtp.html
25 Apr 2012
...can be in only one VTP domain.You make global VLAN configuration changes...Network Management Protocol (SNMP). By default, the switch is in VTP no-management-domain...for a domain over a trunk link (a link that...VLANs) or until you configure a domain name. Until...
www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_19_ea1/configuration/guide/swvtp.html
30 Jun 2007
VLANs divide broadcast domains in a LAN environment. Whenever hosts in one VLAN need to communicate with hosts in another VLAN, the traffic must be routed between them. This is known as inter-VLAN routing. On Catalyst switches it is accomplished by creating Layer 3 interfaces (Switch...
www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008019e74e.shtml
02 Apr 2012
Spanning Tree Protocol (STP) is a Layer 2 protocol that runs on bridges and switches. The specification for STP is IEEE 802.1D. The main purpose of STP is to ensure that you do not create loops when you have redundant paths in your network. Loops are deadly to a network.
References:
19
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk389/tk621/technologies_configuration_example09186a008009467c.shtml
17 Aug 2006
Catalyst switches are configured with Virtual Local Area Networks (VLANs) either through command line operation or VLAN Trunk Protocol (VTP). In either case, Simple Network Management Protocol (SNMP) information is sometimes accessed on a per-vlan basis....
www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a008015773e.shtml
26 Oct 2005
...modified. •Private VLAN support (if the switch...Spanning Tree (MST) protocol database information...when a password is configured on the switch. ...or off on a per-trunk (per-port) basis...disabled. You cannot set VTP to off for the MST...When you globally set VTP mode to off, it...or off on a per-VTP instance basis. For...
www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_55_se/configuration/guide/swvtp.html
22 Oct 2007
|
|
|
|
