|
|
|
1 - 10 of
2,246 results for
Configuring VoIP Fax Relay Using CallManager and a Voice Gateway
|
|
|
|
This document explains how to force fax calls to use Voice over IP (VoIP) Fax Relay rather than local hairpinning. This functionality is useful in a scenario that includes a Primary Rate ISDN (PRI) port accepting voice and fax calls....
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080093fbd.shtml
28 Apr 2006
The Cisco VG248 is an analog gateway for the connection of analog phones, fax machines, modems, and analog voice mail systems to a Cisco CallManager based Telephony system. Fax pass-through is the simplest technique you can use to send fax over...
www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_example09186a008020160d.shtml
20 Feb 2008
This document provides a reference matrix for fax support in various Voice over IP (VoIP) gateways.
www.cisco.com/en/US/tech/tk652/tk777/technologies_tech_note09186a0080159cf3.shtml
08 Jan 2007
...many densities and use various DSP technologies...called packet voice/fax DSP module (PVDM...However, you could also use a separate router...straightforward to configure. Placing the PSTN...systems via an H.323 VoIP interface between...an integrated PSTN gateway, because this approach results in a much simpler network...attendant (AA) or voice mail on your Cisco...
References:
6
TAC
www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/gatewy.html
02 Nov 2007
Cisco Analog Telephone Adaptor (ATA) 186 supports fax transmission only as passthrough. It cannot support fax-relay. Both ports of the ATA support fax calls. For fax calls to work correctly, both the Cisco ATA 186 and the supporting gateway must be configured...
References:
13
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml
15 Sep 2008
...nse no mgcp fax t38 inhibit ...this method of configuring T.38 fax relay: •T.38 capability...the originating gateway to switch to T...upon detection of a fax tone. Because...Cisco Unified CallManager cannot support...Therefore, you must use a configuration... dial-peer voice 1000 voip destination-pattern...
www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42gatewy_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html
18 Jul 2006
...Guide [ Fax / Modem over IP] • Configuring VoIP Fax Relay Using CallManager and a Voice Gateway [Cisco Unified...
References:
5
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk652/tk777/technologies_tech_note09186a0080114565.shtml
04 Jul 2008
...indicate T.38 fax relay switchover. Configuring the gateway to unconditionally use T.38 NSE forced fax relay enables interoperation with a Cisco voice gateway that does not support...passing faxes through a VoIP network, and Cisco...
www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsrelay_ps10592_TSD_Products_Configuration_Guide_Chapter.html
03 Jul 2008
...indicate T.38 fax relay switchover. Configuring the gateway to unconditionally use T.38 NSE forced fax relay enables interoperation with a Cisco voice gateway that does not support...passing faxes through a VoIP network, and Cisco...
References:
5
TAC
www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsrelay.html
03 Jul 2008
...indicate T.38 fax relay switchover. Configuring the gateway to unconditionally use T.38 NSE forced fax relay enables interoperation with a Cisco voice gateway that does not support...passing faxes through a VoIP network, and Cisco...
www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsrelay_ps10591_TSD_Products_Configuration_Guide_Chapter.html
03 Jul 2008
|
|
|
|
