|
|
|
1 - 10 of
1,910 results for
Configuring Windows 2000 DHCP Server for Cisco CallManager
|
|
|
|
This document describes how to configure a Dynamic Host Configuration Protocol (DHCP) Server on Windows 2000 to work with the Cisco IP Telephony solution, Cisco CallManager. Cisco CallManager devices boot up and request an IP address....
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800942f4.shtml
03 Feb 2006
This document discusses and solves the most common problems that cause Cisco IP phones to fail to register with the Cisco CallManager.
References:
6
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a008009485a.shtml
26 May 2009
This document explains how to configure the Cisco CallManager server and the Catalyst 6000 WS-X6608-T1/E1 Blade for Voice over the public switched telephone network (PSTN).
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801152b9.shtml
28 Dec 2005
In an optimized IP Telephony network, IP addresses for telephones and PCs must be set up in different network segments. If Dynamic Host Configuration Protocol (DHCP) is used to assign addresses, then a DHCP server for each network segment is normally needed. However,...
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080114aee.shtml
16 Feb 2006
This document explains how to configure a Cisco CallManager server and a Catalyst 6000/6500 WS-X6608 Blade for audio conferencing. Many of the steps you use in order to create the conference bridge and configure the associated parameters in Cisco CallManager...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080114c64.shtml
03 Feb 2006
This document explains how to configure the Cisco CallManager server and the Catalyst 6000/6500 WS-X6624 Foreign Exchange Station (FXS) blade.
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008015e19d.shtml
03 Feb 2006
...a Windows 2000 CallManager Server 13/Nov/2006 Configuring Windows 2000 DHCP Server for Cisco CallManager 03/Feb/2006...
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_configuration_examples_list.html
25 Apr 2005
This document explains how to configure the Cisco 7920 Wireless IP Phone (Cisco 7920) in common network scenarios. It starts with the most basic configuration required to implement a Cisco 7920. It goes on to explain the next level of complexity, which is the use of VLANs....
www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801a90d3.shtml
09 Oct 2006
This document provides information you can use to configure Cisco CallManager to interoperate with the Cisco Analog Telephone Adapter (ATA) 186 using Skinny Client Control Protocol (SCCP) also known as "Skinny". The Cisco ATA 186 is a two port analog telephone adapter...
References:
9
TAC
www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800a892f.shtml
06 Apr 2009
Cisco 7940/7960 IP phones can support either the Skinny Call Control Protocol (SCCP) to run with Cisco CallManager, the Session Initiation Protocol (SIP) (refer to RFC 2543), or the Media Gateway Control Protocol (MGCP), but not more than one simultaneously.
References:
14
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml
20 Mar 2009
|
|
|
|
