|
|
|
1 - 10 of
385 results for
Configuring a Modem on the AUX Port for EXEC Dialin Connectivity
|
|
|
|
In many situations, it would be necessary to allow a router to accept interactive command processor of Cisco IOS (EXEC) calls with a modem connected to the auxiliary (AUX) port of the router. This document provides the necessary configuration...
References:
4
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
09 Sep 2005
This document shows how to use a modem on the AUX port to configure dialout. In this scenario, a router with a modem on the AUX port dials the Primary Rate Interface (PRI) of the central site...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094579.shtml
02 Mar 2005
This document summarizes the cabling requirements for console and auxiliary (AUX) ports. Cisco routers either have RJ-45-based or DB-25 DCE/DTE console and AUX ports. You can connect either a terminal (DTE) or a modem (DCE) to these ports....
References:
8
TAC
www.cisco.com/en/US/products/hw/routers/ps332/products_tech_note09186a0080094ce6.shtml
03 Sep 2006
Cisco routers and certain switches support out-of-band connectivity (primarily for disaster recovery) with use of a modem that connects to the AUX port or console port. Cisco Catalyst switches do not have AUX ports. Therefore, the...
www.cisco.com/en/US/products/hw/switches/ps679/products_tech_note09186a0080094b30.shtml
27 Jun 2007
This document illustrates a Point-to-Point Protocol (PPP) dialin configuration using external modems.
www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a0080093c31.shtml
05 Feb 2010
This document explains how to attach a US Robotics modem to the Console port of Cisco routers that have RJ-45 console ports. This procedure can be used for other modem brands as well,however you must consult your modem documentation for the...
References:
5
TAC
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00800941c9.shtml
05 Feb 2010
This configuration supports remote users (for example, a home user or a traveling employee) connecting to the network with an analog dial-up modem using V.90 protocol. Using a PC and an analog modem, the user connects through dial-up PPP to a...
www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080093c6e.shtml
09 Sep 2005
This document provides a sample configuration for using sync and async ports for modem dial-in on Cisco 1600,1700,2600,and 3600 routers. The following configuration enables you to connect the sync and async interfaces of a router to external...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a00801d2576.shtml
05 Feb 2010
In many environments, it is necessary to configure an Access Server to accept incoming calls from both Async and ISDN users. These users would be able to seamlessly connect to the network as if physically present. Hence, this setup is commonly used to provide network connectivity...
www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080094691.shtml
03 May 2005
...information on configuring the auxiliary line: Configuring a Modem on the AUX Port for EXEC Dialin Connectivity, tech note http...
www.cisco.com/en/US/docs/routers/access/2900/hardware/installation/guide/Configure.html
16 Jul 2010
|
|
|
|
