|
|
Recommended Content
Support Toolbox
|
1 - 10 of
540 results for
Configuring and Troubleshooting Dual NICs for Cisco Unity
|
|
|
|
This document describes how to properly configure Cisco Unity to work with two Network Interface Cards (NICs) when Cisco Unity is integrated with a CallManager. Voice messaging does not work as expected if it is not properly configured.
www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00801d1c56.shtml
02 Feb 2006
This document describes techniques to troubleshoot problems that you might experience with Cisco Unity audio quality. Audio quality for the Cisco architecture for voice, video and integrated data (AVVID) solution is a perceptual measure of how good audio sounds...
www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00801663a2.shtml
28 Feb 2008
...Associated with Unity Subscriber...2006 Cisco Unity: New...SA) Web Troubleshooting Guide ...Troubleshooting for Cisco Unity...2008 Configuring and Troubleshooting Dual NICs for Cisco Unity 02/Feb...
www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_tech_notes_list.html
25 Apr 2005
...transmit voice. The Cisco Unity server has dual NICs. See the "Cisco Unity Plays System Prompts but Does...system that has been running for a while, it is possible that...on very busy systems. To troubleshoot this problem, do the following...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/troubleshooting/guide/ex/5xcutsg070e.html
20 Jun 2007
...server, both NICs must be configured...Configuring a Dual NIC" section. When the Cisco Unity server has a...randomly turned on for subscribers who...traced to dual NICs on the Cisco Unity...specified in the "Configuring a Dual NIC" section...must be properly configured or a variety of...do not want to configure AFT or NFT...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/troubleshooting/guide/dom/5xcutsg100d.html
19 Jun 2007
...transmit voice. The Cisco Unity server has dual NICs. See the "Cisco Unity Plays System Prompts but Does...system that has been running for a while, it is possible that...on very busy systems. To troubleshoot this problem, do the following...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/troubleshooting/guide/dom/5xcutsg070d.html
19 Jun 2007
...Installation Guide for Cisco Unity Release 5...Failover Configured) Customizing...contains a dual NIC: Configure the dual...See the "Configuring a Dual NIC...Cisco Unity troubleshooting, if applicable...applies to both NICs. You will...Obtaining Cisco Unity License Files...Unity server for any changes...contains a dual NIC and you configured it for fault...in the "Configuring a Dual NIC...you did not configure for fault...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/domfo/5xcuigdfo050.html
01 May 2008
...Installation Guide for Cisco Unity Release 5...Failover Configured) Customizing...contains a dual NIC: Configure the dual...See the "Configuring a Dual NIC...Cisco Unity troubleshooting, if applicable...applies to both NICs. You will...Obtaining Cisco Unity License Files...Unity server for any changes...contains a dual NIC and you configured it for fault...in the "Configuring a Dual NIC...you did not configure for fault...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/umexfo/5xcuigumefo050.html
01 May 2008
This document addresses some of the common issues that can occur in IP Telephony one-way audio conversations that involve Cisco gateways. The Cisco gateways that this document covers are Cisco IOS gateways and routers, Catalyst switches, and DT-24+ gateways.
References:
5
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml
13 Oct 2008
...Installation Guide for Cisco Unity Release 8...Failover Configured) Customizing...contains a dual NIC: Configure the dual...See the "Configuring a Dual NIC...Cisco Unity troubleshooting, if applicable...applies to both NICs. You will...Obtaining Cisco Unity 8.x License...Unity server for any changes...contains a dual NIC and you configured it for fault...in the "Configuring a Dual NIC...you did not configure for fault...
www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/installation/guide/vmfo/8xcuigvmfo050.html
03 Feb 2010
|
|
|
|
