|
|
|
1 - 10 of
1,934 results for
Configuring the BGP Maximum-Prefix Feature
|
|
|
|
This document provides configuration and troubleshooting information on the Border Gateway Protocol (BGP) Maximum-Prefix feature
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008010a28a.shtml
15 Jan 2008
This chapter describes how to configure basic BGP on the Cisco Nexus 7000 series switches running Cisco NX-OS release 5.0(2) and later releases.
References:
8
TAC
www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_bgp.html
25 Oct 2010
This chapter describes how to configure advanced BGP features such as authentication, eBGP, iBGP, route aggregation and route policies on the Cisco Nexus 7000 series, NX-OS release 5.x
References:
9
TAC
www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_advbgp.html
23 May 2011
...Required) •Verify that the BGP Condition Advertisement feature has been configured with the show ip bgp neighbor...peer-group-name} maximum-prefix maximum [threshold] [warning-only] Limits the number of prefixes allowed...in | out} Filters BGP routing updates to and...A password cannot be configured in the number-space-anything...
References:
17
TAC
www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfbgp.html
01 May 2001
...the prefix count for a BGP session has exceeded the configured value. This notification...configured with the neighbor maximum-prefix command. This notification...address family under a BGP session after the cbgpPrefixMaxThresholdExceed...subtracting 5 percent from the maximum prefix limit value configured with the neighbor maximum-prefix...
www.cisco.com/en/US/docs/ios/ios_xe/iproute_bgp/configuration/guide/irg_adv_features_xe.html
20 Jan 2011
...the prefix count for a BGP session has exceeded the configured value. This notification...configured with the neighbor maximum-prefix command. This notification...address family under a BGP session after the cbgpPrefixMaxThresholdExceed...subtracting 5 percent from the maximum prefix limit value configured with the neighbor maximum-prefix...
www.cisco.com/en/US/docs/ios/12_4t/ip_route/configuration/guide/brbadv.html
05 Oct 2005
...MSFC Configuring the BGP Local-AS Feature Configuring the BGP Maximum-Prefix Feature Host and Subnet Quantities How...
www.cisco.com/en/US/tech/tk365/tk80/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
This chapter describes how to configure advanced BGP features such as authentication, eBGP, iBGP, route aggregation and route policies on the Cisco Nexus 7000 series, NX-OS release 5.x
www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/unicast/configuration/guide/l3_advbgp.html
23 May 2011
...template. Step 5 maximum-prefix prefix-limit...config-router-ptmp)# maximum-prefix 10000 (Optional) Configures the maximum number of...Note Any supported BGP policy configuration...
www.cisco.com/en/US/docs/ios/12_4t/ip_route/configuration/guide/t_brbbas.html
17 Nov 2006
This chapter describes how to configure basic BGP on the Cisco Nexus 7000 series switches running Cisco NX-OS release 5.0(2) and later releases.
www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/unicast/configuration/guide/l3_bgp.html
25 Oct 2010
|
|
|
|
