|
|
|
1 - 10 of
163 results for
Configuring the Channel Number and Line Direction Setting on an RXT
|
|
|
|
This document describes how to set receiving transponders card (RXT) parameters. Line direction and channel number are two variables stored on each RXT card internal memory. Every time a new card is installed in a new node, these two parameters...
www.cisco.com/en/US/products/hw/optical/ps2016/products_configuration_example09186a0080094614.shtml
23 May 2006
This document describes how to correctly set parameters for receiving transponders (RXT) cards.
www.cisco.com/en/US/products/hw/optical/ps2016/products_tech_note09186a00801d12ad.shtml
31 Jan 2006
This procedure explains how to set the line direction (west to east, and east to west) of an ONS1580x system on all types of transponders. You must set the right line direction on transponders so that the supervision...
www.cisco.com/en/US/products/hw/optical/ps2016/products_configuration_example09186a0080094ae3.shtml
01 Oct 2006
...Dec/2005 Configuring the Channel Number and Line Direction Setting on an RXT 31/Jan/2006 Configuring the RXT Channel...
www.cisco.com/en/US/products/hw/optical/ps2016/prod_configuration_examples_list.html
25 Apr 2005
This document provides a link to a matrix that defines the firmware versions that support each of the ONS 15800 and ONS 15801 hardware versions, and the software versions for each card.
www.cisco.com/en/US/products/hw/optical/ps2016/products_tech_note09186a0080094ba8.shtml
19 Sep 2005
...to display the document you...2005 Configuring the Channel Number and Line Direction Setting on an RXT 31/Jan...
www.cisco.com/en/US/products/hw/optical/ps2016/prod_tech_notes_list.html
25 Apr 2005
...Current loopback state on the DS-1/E1 interface...DS-1/E1 interface. Setting this variable causes...used by the DS-1 line for the media gateway...reserved for signaling on this channel. • robbedBit—Indicates the DS-1 Robbed Bit...either on channel 16 of an E1 link or channel...the instance for the number of rows specified...
www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/8.5/user/guide/ctmuse85.pdf
21979KB
...Modifying AXSM Sonet Line APSs You can provision the SONET line to have Automatic...for APS. If you are setting up APS on multiple cards, you must first set up an APS connector and...redundancy, see 4.5.11 Configuring Card Redundancy...
www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/user/guide/ctmuse90.pdf
23949KB
...corresponds to the setting(s) you want to...drop-down lists, select an item from the list. For numerics...fields, double-click the field and type the new number or text. Click Apply. 5.3 Configuring Routing Protocols on Optical NEs This section...
www.cisco.com/en/US/docs/net_mgmt/prime/optical/9.6.3/user/guide/CiscoPrimeOptical-9.6.3-UserGuide.pdf
23104KB
...This field is set to the NE IP address, with an applied mask...mask length. The valid range...metric (the number of hops between...from 1 to 15. The smaller the number of hops, the...OL-25608-01 Chapter 5 Configuring Hardware Configuring...Routing Protocols on Optical NEs...Communications Channel) carries provisioning...LDCC (Line Data Communications...
www.cisco.com/en/US/docs/net_mgmt/prime/optical/9.3.1/user/guide/cisco_prime_optical_931_user_guide.pdf
16275KB
|
|
|
|
