1 - 10 of
657 results for
Connecting Routers Back-to-Back Through the AUX Ports
This sample configuration shows you how to directly connect two routers,without a modem or other data communication equipment (DCE) devices. For more information on how to configure modems on auxiliary (AUX) or console ports,see <a href="http://www.cisco.com/en/US/customer/tech/tk801/tk36/technologies_tech_note09186a008009428b.shtml">Modem-Router...
05 Feb 2010
This document summarizes the cabling requirements for console and auxiliary (AUX) ports. Cisco routers either have RJ-45-based or DB-25 DCE/DTE console and AUX ports. You can connect either a terminal (DTE) or a modem (DCE) to these ports. In either...
03 Sep 2006
...SIP networks, which gives users the opportunity to choose SCCP or...Cisco SIP SRST 3.4 also uses a back-to-back user agent (B2BUA), which...accepted and forwarded calls. The main advantage of a B2BUA call...phone •SIP phone to PSTN / router voice port •SIP phone to SCCP phone...
09 Feb 2006
...Server through a Cisco Router 09/Sep/2005 Connecting Routers Back-to-Back Through the AUX Ports 04/Feb/2010 ...
25 Apr 2005
...connections can be established. The debug ip tcp transaction command...connection queue limit reached: port 443 errors. The show tcp brief command displays...clear tcp tcb * or reload the router. Note that this will clear...corrupted, hence will iterate through the list indefinitely causing...HWIC-1DSU-T1 1. Connected HWIC-1DSU-T1 back to back as shown in setup 2...
11 Sep 2012
...out-of-band remote management of the router or as a backup WAN interface...RJ-45 to DB-25 male straight-through cable is available as an orderable option to connect modems to this port. A limited set of modems and...used to connect to this port. The console port will behave like a standard Cisco auxiliary (AUX) port if configured as such...
21 Jan 2010
...command. The following...display two routers connected back-to-back through a fractional...line. The example for...
23 Jun 2003
...can be observed by using the show cem slot/port/0 command. Conditions...module installed in Cisco 3845 routers running Cisco IOS Release...routers. Customer routers are connected through two PE routers, and PE routers...unexpectedly reload when the show controllers command...not train properly in the back-to-back setup. This workaround may...
19 Sep 2012
...the cards' compatibility: Router# hccp 20 bypass version Router# Command Description hccp...been configured. To configure the Cisco CMTS so that a Cisco RF...switch-name tty-switch [aux | console | vty] line-number port hccp group channel-switch...Switch to which the CMTS is connected. module-bitmap Specifies...
03 Apr 2013
...Cisco 12000 series Internet router. Workaround There is no...EIGRP) traffic may not pass through a port adapter. Conditions This...observed on a Cisco 7500 router that has either a 2-port...are configured on either the PA-2FE-TX or the PA-2FE-FX...Cisco 7200 series routers are connected back-to-back via channelized T3 (CT3...
24 Sep 2008