|
|
|
1 - 10 of
4,900 results for
Connecting a Modem to the Console Port on Catalyst Switches
|
|
|
|
Cisco routers and certain switches support out-of-band connectivity (primarily for disaster recovery) with use of a modem that connects to the AUX port or console port. Cisco Catalyst switches do not have AUX ports. Therefore,...
www.cisco.com/en/US/products/hw/switches/ps679/products_tech_note09186a0080094b30.shtml
27 Jun 2007
This document focuses on use of the default parameters to connect and configure management terminals. This document covers the Catalyst 1900,2820,2900,3500,2940
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml
16 Nov 2007
This document summarizes the cabling requirements for console and auxiliary (AUX) ports. Cisco routers either have RJ-45-based or DB-25 DCE/DTE console and AUX ports. You can connect either a terminal (DTE) or a modem (DCE) to these...
References:
8
TAC
www.cisco.com/en/US/products/hw/routers/ps332/products_tech_note09186a0080094ce6.shtml
03 Sep 2006
This document describes how to configure a management IP address on Catalyst 4500/4000, 5500/5000, and 6500/6000 series switches that run Catalyst OS (CatOS) and Cisco IOS® Software. This document also includes Catalyst fixed configuration switches,...
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008010e9ca.shtml
15 Mar 2006
In many situations, it would be necessary to allow a router to accept interactive command processor of Cisco IOS (EXEC) calls with a modem connected to the auxiliary (AUX) port of the router. This document provides the necessary...
References:
4
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
09 Sep 2005
...Connecting Terminal/Modem to Console Connecting a Modem to the Console Port on Catalyst Switches 27/Jun/2007 Connecting...
www.cisco.com/en/US/products/hw/switches/ps628/prod_tech_notes_list.html
25 Apr 2005
This document explains the step-by-step procedure to upgrade the software image on Cisco Catalyst 2950 and 2955 series switches through the Command Line Interface (CLI).
References:
14
TAC
www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_example09186a0080169627.shtml
01 Sep 2004
...Connecting Terminal/Modem to Console Connecting a Modem to the Console Port on Catalyst Switches 27/Jun/2007 EtherChannel...
www.cisco.com/en/US/products/hw/switches/ps607/prod_configuration_examples_list.html
25 Apr 2005
This document explains how to recover a Cisco Catalyst switch when its software becomes corrupted. This document covers these Catalyst models that run Catalyst OS (CatOS) software with the Supervisor Engine:
www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml
08 May 2006
Catalyst switches allow you to configure several descriptive system parameters to ease in the administration of internetworking equipment. The ability to document and identify networking equipment will make it easier for network administrators to...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801aecbb.shtml
13 Dec 2005
|
|
|
|
