Search Results
Help | Feedback
Advanced Search
1 - 10 of 307 results for Determine the VISM Card Memory Size
Sorted By:
Results per page
 
Configuring VISM Features - Cisco Voice Interworking Services (VISM) Installation & Configuration Guide, Release 3.0 [Cisco MGX 8800 Series Switches]
...information in Table 4-1 to determine the log file attributes, VISM card state requirements for command...command and press Enter to determine the current VISM operating mode. Note A new VISM card (one that has not been...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/vism/vism_r3.0/installation/guide/vm30_04.html
02 Nov 2007
Command Line Interface (CLI) - Cisco MGX 8850 VISM, Release 1.5 Installation and Configuration [Cisco MGX 8200 Series Edge Concentrators]
...echo loss value to 6 db.. Use the cnfgwis command to bring an out-of-service VISM into service. This command is used in conjunction with the cnfwoos (configure gateway...be used in setting the buffer size for dejittering. Allowable values...mode> mode The mode of determining jitter delay. 1 = fixed, 2...characteristics for the current card. The line must be added before...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/vism/vism_r1.5.5/installation/guide/VSM15Ch7.html
14 Oct 2007
[pdf] PDF Version of VISM Installation and Configuration, Release 1.5.5
...The delay to be used in setting the buffer size for dejittering. Allowable values...70, 80, 90, and 100 bytes. The default is 60. Log: Yes...Active Privilege: 1 7-81 VISM Installation and Configuration...to adaptive. mode The mode of determining jitter delay. 1 = fixed, 2...characteristics for the current card. The line must be added before...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/vism/vism_r1.5.5/installation/guide/VSM155.pdf
04 Oct 2007 1979KB
CLI Commands - Cisco Voice Interworking Services (VISM) Installation & Configuration Guide, Release 3.0 [Cisco MGX 8800 Series Switches]
...terminates with an s to indicate the out-of-service (standby...Configures an out-of-service VISM card to the in-service state. dspgwstate...the initial jitter buffer delay size, use the cnfjtrinitdelay command...AAL2 PVC, and AAL2 trunking Determine the current jitter delay mode...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/vism/vism_r3.0/installation/guide/vm30_05.html
02 Nov 2007
2.0(1.1) Version Release Notes Cisco MGX 8250/8230 VISM - Voice Interworking Service Module, Release 2.0 [Cisco MGX 8800 Series Switches]
...command has been modified in that the window size parameter now takes values in the range 1 - 127 (the range was 1 - 128). Do NOT upgrade the VISM backup boot firmware as this may render the VISM card inoperable. None -All other...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/vism/release/notes/2011Rnot.html
03 Nov 2007
MGX 8250 Command Line Interface - Cisco MGX 8250 Multiservice Gateway Command Reference [Cisco MGX 8200 Series Edge Concentrators]
...statistics parameter settings on the current card (FRSM-2CT3) wilco.1.3...Subtype Counts: 0 0 0 0 Total File Memory Used: 0 Number of File Allocated: 0 Current File Size: 0 Stat Memory Allocated: 0 Auto...wilco.1.3.VHS2CT3.a > Use the dspswfunc PAR command to view status...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r1.1.3/mgx_8250/command/reference/mgx88.html
02 Nov 2007
MGX 8230 Command Line Interface - Cisco MGX 8230 Multiservice Gateway Command Reference [Cisco MGX 8200 Series Edge Concentrators]
...statistics parameters on the current card. PXM, AUSM, CESM, FRSM dspstatparms...statistics parameter settings on the current card (FRSM-2CT3). wilco...Counts: 0 0 0 0 Total File Memory Used: 0 Number of File Allocated: 0 Current File Size: 0 Stat Memory Allocated: 0 Auto...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r1.1.3/mgx_8230/command/reference/mgx88.html
02 Nov 2007
MGX 8800 Command Line Interface - Cisco MGX 8800 Series Switch Command Reference, Release 1.1.31 [Cisco MGX 8800 Series Switches]
...statistics parameters on the current card. PXM, AUSM, CESM, FRSM...statistics parameter settings on the current card (FRSM-2CT3) wilco.1.3...Subtype Counts: 0 0 0 0 Total File Memory Used: 0 Number of File Allocated: 0 Current File Size: 0 Stat Memory Allocated: 0 Auto...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r1.1.3/mgx_8850/command/reference/mgx88.html
02 Nov 2007
Cisco WAN Manager SNMP Service Agent Guide, 15.4.00 - B - Service MIBs [Cisco WAN Manager]
...svVismSRCPRequestRetry to determine the exponential retry interval...PXM1E, and PXM45) Total size of the tone plan table...currently configured on the VISM/VISM-PR card. Access: read-only...greater than the specified size is rejected. Access: read-write...value of free DS0 counts on the VISM/VISM-PR card. If the number of free...PXM45) Threshold value of memory utilization on the VISM...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.4.00/user_snmp/guide/b_svcmib.html
03 Nov 2007
Cisco WAN Manager SNMP Service Agent Guide, 16.0 - B - Service MIBs [Cisco WAN Manager]
...Range: 1-10 Default = 3 The requesting entity provides suitable...and svVismSRCPRequestRetry to determine the exponential retry interval for...PXM1, PXM1E, and PXM45) Total size of the tone plan table. Read-only...template currently configured on the VISM/VISM-PR card. Read-only. — svVismMode...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/user_snmp/guide/b_svcmib.html
03 Jun 2008