|
|
|
1 - 10 of
1,194 results for
Determining DLCI Limits From LMI Status Updates
|
|
|
|
This document provides the formula for calculating the maximum theoretical number of Data-Link Connection Identifiers (DLCIs) that can be advertised over an interface, based on the Local Management Interface (LMI) type. The method the formula was derived from is listed as well as debug...
www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a0080094183.shtml
01 Jun 2005
...Frame Relay PVCs 10/Aug/2005 Determining DLCI Limits From LMI Status Updates 01/Jun/2005 Frame Relay Glossary...
www.cisco.com/en/US/tech/tk713/tk237/tsd_technology_support_troubleshooting_technotes_list.html
25 Apr 2005
...display the document you selected. Determining DLCI Limits From LMI Status Updates 01/Jun/2005 Frame Relay Glossary...
www.cisco.com/en/US/tech/tk713/tk237/tech_tech_notes_list.html
25 Apr 2005
...Polling verification timer value from 5 to 30 seconds. 15 seconds...intf-type DCE frame-relay lmi-t392dce 20 Command ...LMI autosense is active and determines the LMI type by communicating...data-link connection identifier (DLCI) for use when the Local Management...at linkup or when receiving LMI Full Status messages, use the frame-relay traps-maximum dlci-status-change command...configuration mode. To disable any limit on the number of traps, use...
www.cisco.com/en/US/docs/ios/12_2/wan/command/reference/wrffr3.html
16 Oct 2007
...DLCI 0. Circuits other than DLCI 0 are not affected. The...lapf t203 To set a full status polling interval, use the frame-relay lmi-n391dte command in interface...positive integer in the range from 1 to 255. 6 keep exchanges...at linkup or when receiving LMI Full Status messages, use the frame-relay traps-maximum dlci-status-change command in...configuration mode. To disable any limit on the number of traps, use...
www.cisco.com/en/US/docs/ios/wan/command/reference/wan_f2.html
09 Oct 2007
...DLCI 0. Circuits other than DLCI 0 are not affected. The...lapf t203 To set a full status polling interval, use the frame-relay lmi-n391dtecommand in interface...positive integer in the range from 1 to 255. 6 keep exchanges...at linkup or when receiving LMI Full Status messages, use the frame-relay traps-maximum dlci-status-changecommand in...configuration mode. To disable any limit on the number of traps, use...
www.cisco.com/en/US/docs/ios-xml/ios/wan/command/wan-f2.html
30 Nov 2011
...penalty exceeds the suppress limit, the route state changes from history to damp. flapped Number...2011 Related Commands reuse The limit by which a route is unsuppressed...Every 10 seconds, the router determines which routes are now unsuppressed...Command Description debug bgp ipv6 updates Displays debugging messages...
www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_cr_book.pdf
9188KB
...everything except a default route from the routing ! updates sent on the (slow) asynchronous...static default route) of determining that the router is the...information that is displayed from the show calltracker active...AS5800 • Cisco AS5850 Determining Platform Support Through...specific platforms. To get updated information regarding platform...
www.cisco.com/en/US/docs/ios/dial/configuration/guide/12_4/dia_12_4_book.pdf
14309KB
...everything except a default route from the routing ! updates sent on the (slow) asynchronous...static default route) of determining that the router is the...information that is displayed from the show calltracker active...AS5800 • Cisco AS5850 Determining Platform Support Through...specific platforms. To get updated information regarding platform...
www.cisco.com/en/US/docs/ios/dial/configuration/guide/12_4t/dia_12_4t_book.pdf
13942KB
...CHAP: I RESPONSE id 1 len 26 from "krist...periodic message to the user to update progress in the connection...other serial devices with a limited number of asynchronous...command in EXEC mode to check the status of the vty lines. • Use the...in privileged EXEC mode to determine where the problem may lie...queued lines and to remove lines from the queue, use the following...
www.cisco.com/en/US/docs/ios/dial/configuration/guide/15_0s/dia_15_0s_book.pdf
11318KB
|
|
|
|
