|
|
|
1 - 10 of
475 results for
Enabling H.323 Clear Text Authentication on an ATA Registered with Gatekeeper
|
|
|
|
H.323 networks have different kinds of configurations and call flows. This document discusses most of the security concerns with H.323 networks that involve gatekeepers. This document summarizes the way each feature works and how to troubleshoot it with...
www.cisco.com/en/US/tech/tk1077/technologies_white_paper09186a0080094a01.shtml
02 Feb 2006
...authentication method, with the following possible values: •0—Do not use authentication (default) •1—Use...administration-level security on a per-call basis Value...parameters that are related to H.323 gatekeeper configuration: •GkOrProxy...specify the IP address of an alternate H.323 gatekeeper...seconds before the Cisco ATA fails back to the primary...whether the Cisco ATA re-registers with the H.323 gatekeeper...
www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15/english/administration/guide/h323/h3288APE.html
02 Nov 2007
... Cisco H.323 Gateway...html) Enabling H.323 Clear Text Authentication on an ATA Registered with Gatekeeper. (http...
www.cisco.com/en/US/solutions/collateral/ns340/ns394/ns165/ns391/net_implementation_white_paper0900aecd80707d67.pdf
24 Dec 2007
338KB
...parameter to select the desired authentication method, with the following possible values: •0—Do not use authentication (default) •1—Use...administration-level security on a per-call basis Value...parameter to specify the H.323 gateway IP address if the network does not contain an H.323 gatekeeper. In this scenario, all...originating from the Cisco ATA will be directed to the...
www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/h323/h3288APE.html
02 Nov 2007
...only 0/1—Disable/enable the requirement for the alternate gatekeeper to register. 4—H.323 only 0—Denotes a non-Cisco...CallManager environment. 1—Enable the Cisco ATA to operate in a Cisco CallManager...is supplied by the far end with RTP. 7 0/1—Disable... Default: 0 Note On power up, all registrations...
www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/sip/SIP88APE.html
02 Nov 2007
...mode. • Enable SIP or H.323 service, if...gateway to remain registered with the gatekeeper. Release Modification...for SIP and H.323 protocols...being shut down on a Cisco gateway: Router> enable Router# configure...
www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_cr_book.pdf
9188KB
...Establishes username authentication with encrypted passwords. or...Establishes username authentication by access list. Step 2...using escape characters on the hosts to which they...Passwords will be displayed in clear text in your configuration unless you enable the service password-encryption...remote users dial in to an access server to initiate...
www.cisco.com/en/US/docs/ios/security/configuration/guide/12_4/sec_12_4_book.pdf
14208KB
...continue to use basic HTTP authentication if: you do not want the...ports; if you use NAT on a router and you do not...appliance; basic HTTP authentication might work better with your network. For example...adaptive security appliance in clear text. We recommend that you...secure-http-client command whenever you enable HTTP authentication. For...appliance username followed by an at sign (@) and then...
www.cisco.com/en/US/docs/security/asa/asa83/command/reference/cmdref.pdf
15491KB
...continue to use basic HTTP authentication if: you do not want the...ports; if you use NAT on a router and you do not...by the ASA; basic HTTP authentication might work better with your network. For example...the client to the ASA in clear text. We recommend that you...secure-http-client command whenever you enable HTTP authentication. For...ASA username followed by an at sign (@) and then...
www.cisco.com/en/US/docs/security/asa/asa84/command/reference/asa_84_cmd_ref.pdf
18102KB
...continue to use basic HTTP authentication if: you do not want the...ports; if you use NAT on a router and you do not...by the ASA; basic HTTP authentication might work better with your network. For example...the client to the ASA in clear text. We recommend that you...secure-http-client command whenever you enable HTTP authentication. For...ASA username followed by an at sign (@) and then...
www.cisco.com/en/US/docs/security/asa/asa90/command/reference/asa_90_cmd_ref.pdf
15476KB
|
|
|
|
