|
|
|
1 - 10 of
924 results for
Equivalent MIB Objects for Frame Relay show Commands
|
|
|
|
...you selected. Equivalent MIB Objects for Frame Relay show Commands 26/Oct/2005 How to Detect Frame Relay PVC State Changes...
www.cisco.com/en/US/tech/tk713/tk237/tsd_technology_support_maintain_and_operate_technotes_list.html
25 Apr 2005
...code. FaxRelayNsfManufCode Fax relay NSF manufacturers code. FaxRelayPktLossConceal Fax relay packet loss conceal. Command Description dial-control-mib Specifies attributes for the call history table. show call active fax Displays call...
www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_12.html
11 Oct 2007
...in privileged EXEC mode. show ip device tracking {all count...information. See Table 145 for a list of valid interfaces...Modification 12.2SX This command was introduced. 12.4(15...valid interfaces that may be shown as the type-of-interface...Loopback interface MFR Multilink Frame Relay bundle intrface Multilink ...vrf vrf-name] Firewall MIB Statistics Syntax show ip inspect...
www.cisco.com/en/US/docs/ios/security/command/reference/sec_s4.html
28 Mar 2011
...from the show interface command), use the ifIndex for the interface itself (the ifDescr shows "cX/Y/Z"). Note...MODULE-IDENTITY for the IF-MIB is ifMIB and its top-level...lists IF-MIB Tables and Objects. Table 3-173 IF-MIB...uni-cast) for packets or frames the system receive on...initialization message. •Show the actual sessions that...3-190 lists MPLS-LDP-MIB Tables and Objects. . Table 3-190 MPLS-LSR-MIB...to provide a mechanism for specifying a contiguous...is going to specify for Frame Relay specific LDP Intialization...
www.cisco.com/en/US/docs/cable/cmts/mib/12_2sc/reference/guide/ubrmib3M.html
11 Feb 2013
...router does not support the objects in cdxCmCpeAccessGroup (equivalent to the cable host access-group command). On the Cisco uBR10012...functionality in the DOCS-SUBMGT-MIB. cdxIfUpChannelTable ...cdxIfUpChannelAvgUGSLastFiveMins These objects related to Unsolicited Grant...downstream traffic counters only for cable modems that are provisioned...either by an SNMP GET or CLI show command). •A null is...
www.cisco.com/en/US/docs/ios/zz_trash/CableCmds/ubrmib3M.html
24 Nov 2010
...for MPLS internetworking, for example, ATM, Frame Relay, or Ethernet. Figure 4 Interface Group MIB Stack Table for MPLS Interfaces Note Tunnel...them. Text strings describe object names, and integers allow...MIB-variable, you enter an SNMP get command with an object identifier...MPLS-LSR-STD-MIB. Figure 5 shows the position of the MPLS-LSR-STD-MIB...
www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/lsrmbrfc.html
02 Feb 2007
...forth. Refer to Table 2-11 for a comparison of equivalent SONET and SDH terms. Table 2-9 shows the channel payloads that are...to DS1, and you can assign Frame Relay service to any level path down to DS0. For example, an STS-1 path...on that line with the dnpath command. •You can not configure...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r5/mpsm/configuration/guide/prep4cfg.html
02 Nov 2007
...MPLS-LDP-FRAME-RELAY-STD-MIB is not implemented for Cisco IOS Release 12.2...supports Ethernet, ATM, and Frame Relay, then all four MIB modules need to be used by...NMS serves as the medium for user interaction with the network management objects in the MIB. The SNMP...standard SNMP get and getnext commands to accomplish a variety of...and the implementation of equivalent functions in the Cisco IOS...
www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_ldp_mib_3815.html
12 Feb 2008
...MPLS-LDP-FRAME-RELAY-STD-MIB is not implemented for Cisco IOS Release 12.2...supports Ethernet, ATM, and Frame Relay, then all four MIB modules need to be used by...NMS serves as the medium for user interaction with the network management objects in the MIB. The SNMP...standard SNMP get and getnext commands to accomplish a variety of...and the implementation of equivalent functions in the Cisco IOS...
www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/ldpmbrfc.html
02 Feb 2007
...MPLS-LDP-FRAME-RELAY-STD-MIB is not implemented for Cisco IOS Release 12.2...supports Ethernet, ATM, and Frame Relay, then all four MIB modules need to be used by...NMS serves as the medium for user interaction with the network management objects in the MIB. The SNMP...standard SNMP get and getnext commands to accomplish a variety of...and the implementation of equivalent functions in the Cisco IOS...
www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_ldp_mib_3815_support_TSD_Island_of_Content_Chapter.html
12 Feb 2008
|
|
|
|
