|
|
|
1 - 10 of
67 results for
Failure of CCME to Recognize the Second Port of Cisco ATA
|
|
|
|
This document describes one possible reason that Port 2 of the Cisco Analog Telephone Adaptor (ATA) is not displayed. This document provides a solution for this problem in a Cisco CallManager Express environment.
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805a2f8b.shtml
11 Sep 2006
This document provides information you can use to configure Cisco CallManager to interoperate with the Cisco Analog Telephone Adapter (ATA) 186 using Skinny Client Control Protocol (SCCP) also known as "Skinny". The Cisco ATA 186 is a two...
References:
9
TAC
www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800a892f.shtml
06 Apr 2009
...DHCP Server for Cisco CallManager 03/Feb/2006 Failure of CCME to Recognize the Second Port of Cisco ATA 11/Sep/2006...
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_configuration_examples_list.html
25 Apr 2005
Cisco Unified Communications Manager Version 7.1
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_71.html
19 Apr 2013
Cisco Unified Communications Manager Version 8.5
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_85.html
19 Apr 2013
Cisco Unified Communications Manager Version 8.0
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_80.html
19 Apr 2013
Cisco Unified Communications Manager Version 7.0
www.cisco.com/cisco/web/support/model/tsd_software_callmanager_version_70.html
19 Apr 2013
...to Register with Cisco CallManager 03/Oct/2006 Failure of CCME to Recognize the Second Port of Cisco ATA 11/Sep/2006...
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_tech_notes_list.html
25 Apr 2005
...CME. If a call is placed to the second port of the Cisco ATA device, it will be disconnected...port uses the MAC address of the Cisco ATA. The analog phone attached to the second port uses a modified version...
References:
10
TAC
www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmead.pdf
8783KB
...procedure for loading an image when the device lacks a valid image and...sequence is issued within 60 seconds of a power-on or reload event. Diagnostic (available only on the Cisco ASR1000 series router) The...accessed using an RP auxiliary port. • A break signal (Ctrl-C...and the router was configured to enter diagnostic mode when the...diag)# If a Cisco IOS process failure is the reason for entering diagnostic...
www.cisco.com/en/US/docs/ios/security/configuration/guide/12_4/sec_12_4_book.pdf
14208KB
|
|
|
|
