1 - 10 of
210 results for
Fax Configuration on a Cisco WS-X6624 with an H.323 Gateway
This document describes the Cisco Catalyst 6000 24-Port ForeignExchange Station (FXS) Analog Interface Module (WS-X6624-FXS). The documentprovides product information,specifications,compliance and configurationinformation,as well as known issues.
22 Oct 2008
This document presents available options for the proper operation of faxes in this topology:
22 Oct 2008
This document explains how to force fax calls to use Voice over IP (VoIP) Fax Relay rather than local hairpinning. This functionality is useful in a scenario that includes a Primary Rate ISDN (PRI) port accepting voice and fax calls. The voice calls are directed to...
28 Apr 2006
This document provides a reference matrix for fax support in various Voice over IP (VoIP) gateways.
08 Jan 2007
...a PBX is connected to a gateway using QSIG via H.323 and calls are made between phones on the PBX and IP phones attached to the Cisco Unified CallManager...number, is provided by the gateway terminating the QSIG protocol...and later, in conjunction with MGCP gateways such as...This section describes the fax and modem support available...voice gateways, followed by a listing of supported platforms and example configuration files. Fax over IP...image is converted from an analog signal and is carried...
18 Jul 2006
...QSIG via H.323 and calls...between phones on the...provided by the gateway terminating...provided in Cisco Unified...conjunction with all MGCP...describes the fax and modem...modem support on Cisco voice gateways, followed by a listing of...and example configuration files. Fax over IP...machines with IP Telephony...converted from an analog signal...protocols such as H.323, SIP, MGCP...
17 Mar 2006
...04/Jul/2008 Fax Configuration on a Cisco WS-X6624 with an H.323 Gateway 22/Oct/2008 Fax Relay Troubleshooting...
25 Apr 2005
...transmissions fail with fax pass-through mode from...VIC-2FXS (only) to the WS-X6624-FXS gateway with Cisco CallManager 3-1-2c...5YE2 and 12.1.5YE4 on the WS-C4224V and will...tools to look for known fax problems in the Cisco IOS...searches were made for a specific fax brand to identify...relay to fail for VoFR, and an upgrade will be needed to...the routers. If your configuration involves two gateways connected...
04 Jul 2008
...disabled to disable Cisco and T.38 fax relay. To use T.38 fax relay on the VG248...following commands on gateway dial peers that...calls. •For an IOS gateway using H.323, the command is: fax protocol t38 nse force. •For a gateway using...support redundancy with T.38 fax... To disable Cisco fax relay and...
15 Feb 2008
...a PBX is connected to a gateway using QSIG via H.323 and calls are made between phones on the PBX and IP phones...number, is provided by the gateway terminating the QSIG protocol...This support is provided in Cisco Unified CM Release 3.3 and later, in conjunction with all MGCP T1/E1 ISDN gateways...This section describes the fax and modem support available...voice gateways, followed by a listing of supported platforms and example configuration files. Fax over IP...image is converted from an analog signal and is carried...
12 Jun 2007