|
|
|
1 - 10 of
1,517 results for
Frame Relay Traffic Shaping with Distributed QoS on the Cisco 7500 Series
|
|
|
|
This document clarifies the differences between the application of traffic shaping to Frame Relay interfaces on Cisco 7500 series routers with Versatile Interface Processors (VIPs) and on other platforms. The other...
www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a96b5.shtml
10 Aug 2005
This document describes Distributed Traffic Shaping (DTS) and consolidates much of the information that is available today.
www.cisco.com/en/US/tech/tk713/tk237/technologies_configuration_example09186a00800949dd.shtml
01 Jun 2005
This document clarifies the functional differences between shaping and policing, both of which limit the output rate. Though both mechanisms use a token bucket as a traffic meter to measure the packet rate, they have important functional differences. (A token bucket...
References:
47
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml
10 Aug 2005
This document explains the specific show commands available for Frame Relay traffic shaping.
www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a0080093c06.shtml
17 Nov 2007
This document reviews the hierarchical queueing architecture on serial interfaces configured with Frame Relay encapsulation. When configured with Frame Relay Traffic Shaping (FRTS), Frame Relay interfaces support the...
www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a00800a4754.shtml
18 Nov 2005
This document provides sample configurations for configuring Class-Based Weighted Fair Queueing (CBWFQ) on a Frame Relay interface. CBWFQ is enabled with the bandwidth command, as configured in a policy-map with the commands of the modular Quality...
www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml
10 Aug 2005
This document provides a sample configuration for Class-Based Weighted Fair Queueing (CBWFQ) with Frame Relay Traffic Shaping (FRTS).
www.cisco.com/en/US/tech/tk713/tk237/technologies_configuration_example09186a008009486b.shtml
01 Jun 2005
...interface, see the "Frame Relay Fragmentation with Hardware Compression...this chapter. When Frame Relay fragmentation is configured, the following conditions...used. •Frame Relay traffic shaping (FRTS) must be configured...fragmentation (except on the Cisco 7500 series routers on which Versatile...Interface Processor-Based Distributed FRF.11 and FRF.12...
www.cisco.com/en/US/docs/ios/12_2/wan/configuration/guide/wcffrely_ps1835_TSD_Products_Configuration_Guide_Chapter.html
17 Dec 2002
... Frame Relay Command Reference...2000 Frame Relay Traffic Shaping with Distributed QoS on the Cisco 7500 Series 10/Aug...
www.cisco.com/en/US/tech/tk713/tk237/tech_configuration_examples_list.html
25 Apr 2005
...signals) by reducing the shaped-to rate for a period...BECN, and ForeSight Frame Relay signalling. This feature runs on Cisco 7500 series routers with VIP2-40, VIP2-50...configure DTS, see the chapter "Configuring Distributed Traffic Shaping" in this book. ...
References:
14
TAC
www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfpolsh.html
30 Apr 2001
|
|
|
|
