|
|
|
|
|
1 - 10 of
98 results for
Getting to Know IGX UFM Cards and Cables
|
|
|
|
This document provides common IGX configuration scenarios that are typically found in real working networks. The majority of these labs are simple,yet effective,in demonstrating the abilities of the multiservice IGX switch.
www.cisco.com/en/US/products/hw/switches/ps988/products_configuration_example09186a00801c1211.shtml
30 Apr 2009
...different values to provision the connection...masking allows the known alarms in the network...supported in both IGX and BPX platforms...on the following cards: •IGX –FRM-E –UFM-C –CVM –UVM...over speed, and cable mismatch failures...incrementing on standby UFM after background diag test. CSCed21795 IGX/BPX QIR timeout...Upgrading LCNs to 60K Fails CSCed45736...failure on active BCC card CSCee21672 Incorrect...Stats (from SNMP GET) thr on/off3...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...and robust message after Y-Red UFM switch over. CSCdr14935 Unable to add UFM UXM connections from UFM side and...serialPortLeadState CSCdr19348 NTS connections get bit errors when Frame Relay bursts...prompt while deleting a trunk on IGX UXM card CSCdr21739 Node hung up and lost...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...lines using 24 DS0s CSCec30644 IGX UXM IMA trunk not allocating correct...UBUs are incrementing on standby UFM after background diag test. CSCed21795 IGX/BPX QIR timeout value in cnffstparm...CSCed41679 BXME, Upgrading LCNs to 60K Fails CSCed45736 Suddenly...due to UP failure on active BCC card CSCee21672 Incorrect output...Control the RT Stats (from SNMP GET) thr on/off3 (SNMP Gets causing...Anomalies in Release 9.3.51 Known Anomalies in Release 9.3.51...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...Configuration Guide Getting Started Download this chapter Getting Started Feedback...Agent provides access to the CWM database...switching nodes, IGX WAN switching nodes...sets of interface cards. A network interface...co-located with and cabled to the BPX switch...21/V.35 •UFM (Universal Frame...MGX 8220 (formerly known as AXIS) is a feeder...
www.cisco.com/en/US/docs/net_mgmt/provisioning_center/4.0/wan_manager_equipment_module/configuration/guide/CSgetstart.html
01 Jul 2007
...MGX 8220 IGX 8400 MGX...following ports: UFM, AUSM-8, PXM, AXSM. To create ports on these cards, you can...performing an SNMP GET on this variable...endpoint as known by the NE or the VISM card. The endpoint...ranges from 1 to 240 which...other cards, GET will result...AUSM-8, UFM, AXSM...BPX 8600 IGX 8400 MGX...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.0.00/user_snmp/guide/snmp.pdf
11471KB
...MGX 8220 IGX 8400 MGX...following ports: UFM, AUSM-8, PXM, AXSM. To create ports on these cards, you can...performing an SNMP GET on this variable...endpoint as known by the NE or the VISM card. The endpoint...ranges from 1 to 240 which...other cards, GET will result...AUSM-8, UFM, AXSM...BPX 8600 IGX 8400 MGX...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.3.00/user_snmp/guide/snmp.pdf
11281KB
...MGX 8220 IGX 8400 MGX...following ports: UFM, AUSM-8, PXM, AXSM. To create ports on these cards, you can...performing an SNMP GET on this variable...endpoint as known by the NE or the VISM card. The...ranges from 1 to 240 which...other cards, GET will result...AUSM-8, UFM, AXSM...BPX 8600 IGX 8400 MGX...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/user_snmp/guide/snmp.pdf
11510KB
...port is obtained, it can be used to operate on the svFrPortTable and...creating connections. svPort 4 IGX 8400 MGX 8220, 8230, 8250...This table is supported for UFM, AUSM-8, PXM, AXSM ports. To create ports on these cards, you can obtain the card’s...logical port by performing an SNMP GET on this variable and then use that...object identifies the endpoint as known by the NE or the VISM card. The...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/user_snmp/guide/snmp.pdf
17862KB
...svPhysicalToLogicalMapTable) is useful to obtain the logical port given...FRSM-4, FRSM-8, AUSM-8, UFM, AXSM, MPSM-8T1E1, and MPSM-T3E3-155 cards use logical ports. Once obtained, the logical port can be used to operate on the svFrPortTable...object identifies the endpoint as known by the NE or the VISM card. The...cards. For all other cards, GET will result in a NO-SUCH-NAME...Description Values svMapNode 1 BPX 8600 IGX 8400 MGX 8850 Name of the routing...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.4.00/user_snmp/guide/snmp.pdf
9778KB
|
|
|
|
|
